Settings reset code?

Does anyone know the code for a total settings reset on the N95 please

It must only be in a few thousand posts on these forums so pretty obscure.
Revert to factory defaults: *#7780#
Soft reset: *#7370#
Hard reset: power off. Hold down '3', '*' and 'call'. Power on with those buttons pressed. Release them when the phone shows the nokia "handshake" logo or the language selection screen.
Do a backup first - these procedures will wipe your settings at least, and the resets will wipe everything in the phone's central memory (but not the content of the memory card).
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • ColdFusion Builder 3 Settings Reset on Restart

    I've downloaded the ColdFusion Builder 3 trial and am experiencing some odd and very annoying behavior.
    I've customized some code editor text font and color settings. I've added an entry to the CF Servers panel for an instance of ColdFusion 10 running inside a VMWare virtual server on my laptop.
    When I restart Eclipse, all the code customizations I've made are reverted back to the default install settings and the entry in my CF Servers panel is gone.
    I've been an IntelliJ user for well over a year, but in doing much more cfscript-based development the CF Plugin for IntelliJ is proving to be a hindrance so I thought I'd give CFB 3 a try and see if there were any improvements over CFB 2. However, I can't take this kind of behavior. Hopefully someone can give me a setting or someone else has seen this before and can give me an idea of where to start looking.
    I have CF Builder installed as a plugin into Eclipse Kepler 64-bit for Mac. I added the CF Builder update site and have updated to CF Builder 3.0.0.290000. I also previously installed as the standalone version with no additional plugins and experienced the same behavior.
    Anyone have any ideas?
    Thanks,
    Dan

    Milan...
    My apologies for taking so long to get back to this. I just did some testing tonight of your instructions as well as those by Kaif above.
    Firstly, I installed ColdFusion 10 locally on my Mac. I added the local server to the CF Servers panel successfully. After restarting Eclipse, the localhost entry remained in the CF Server panel.
    Secondly, I followed your instructions to make a new profile and make my font/coloring customizations in it. I restarted Eclipse and my font and color selections were maintained (through 3 restarts). I noted that my newly created profile was selected in Preferences after each restart.
    I then added a remote CF 10 server to the CF Servers panel successfully (as noted by the panel telling me that the server was running and being able to launch the CF Admin from within Eclipse). At this point there were 2 entries in my CF Server panel--localhost and the one remote server that lives inside my VM. I restarted Eclipse and when it came back up, only the localhost server remained. I might add that the VM has ColdFusion 10 installed in "multi-instance" mode and that the remote server instance that I added to the CF Servers panel was one of 4 CF instances configured and running inside the VM.
    All the while, my font and color customizations have remained the way I set them.
    So, it appears as though we're down to just one bug relating to remote server registrations in the CF Servers panel.
    I saw that another user was reporting something similar in this thread: ColdFusion Builder 3 RDS and Remove Server settings reset on each restart so apparently it's not just me.
    Thanks to you and everyone else for all the ideas and troubleshooting help thus far. At least at this point I think I might be able to use this for day-to-day coding, even though I really want the remote server system to work correctly so I can use the step debugger feature again.
    Dan

  • Base Station, Error 4 for any action, Factory settings reset didn't work

    Hi all,
    I decided to try my AirPort Base station (which was used by someone else before), and have changed some settings trying to make it work Now I keep getting that annoying error message with -4 error code when trying to connect to my base station, and can't make any changes whatsoever.
    I have a Windows Vista OS, and an 4.1 Admin utility ( I tried to install a later version, but it kept saying I had to "install Windows XP or Vista first". (Kidding?!)
    I did both a soft reset and a factory settings reset (although I don't know how I did the latter, since both pressing the resed button for 5 and 30 sec did not work. Anyway, the station's name has changed to its serial N, so I did the reset somehow
    The station's IP address in the Admin Utility begins with 172. and the same IP ip address I have in my network settings. I guess I had changed the ip somehow, and that's where the problem started... Anyway, I can't enter the configuration window to change anything.
    Any ideas?

    Still no ideas? I can't believe there's nobody to answer this question
    Well, as I said I believe the problem is the ststion's new ip address, but I don't know how to change it.
    I did a full reset, but the ip address did not change, so maybe it is my laptop's setting to blame?

  • Passcode has been change, how can I now access and reset code without losing everything!

    Unable to get into settings,  code was change, how to access and reset code without losing apt's? Is the only way is to completely erase and start new?

    Sorry, but you cannot. If you have a current backup in iTunes then you can restore it.
    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • E55 issues, anyone have Hard Reset code?

    Hello everyone,
    I recently just bought a new E55, unfortunately it seems somewhat dead on arrival. I've charged in for quite a while via usb and wall charger. I've replaced the battery, sim cards, and memory cards to no avail.
    When I attempt to turn the phone on, the screen remains black, and it vibrates very briefly and nothing else happens. I've never seen a charge indicator show up.
    The only interesting bit of information is that when I plug it into my computer, some portion of the phone's hardware (usb flashing parent, usb flashing ) are detected--but I don't know if that is useful. It seems to 'disconnect' after maybe 30 seconds or so. 
    Anyway, obviously this phone is defective. I was wondering if anyone could help with either:
    The hard reset code for the E55 ('*' + '3' + 'green call' doesn't work). It might be different because of the half-qwerty.
    or
    Know a way to manually flash the phone using the hardware detected by my computer (nokia software suite can't detect the phone's presence--I assume because it doesn't turn on.
    Any help would be great! 

    now it does sound like it is a DOA which any of those codes may not revive your unit. you can always take it to nokia care and have them have a look  at it and you might have to pay but chances are they might fix it for you  
    try option nubmer 3 
     you do this with the phone turned OFF and do not let go off the three buttons until you see the handshake no other screen
    With all these operations I recommend you TAKE OUT MEMORY CARD and DO A BACK UP OF YOUR STUFF!!!
    NOTE: In front of the hash key ( #) there is also a STAR key that people often miss and state that the code does not work.
    1.. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data) Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345.
    2.*#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
    3. hard reset - hold the following buttons * (star key), 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, /GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. ) For Nokia N97 (unofficial version but works) is SHIFT /SPACE BAR / BACKSPACE while holding the power button. Again do not let go until you see the handshake screen.
    If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance. 
    Message Edited by radical24 on 21-Sep-2009 02:48 PM
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • Itunes and Internet wont open because of a "netsh reset" code

    My Itunes store was having troubles opening before, and i couldnt figure anything out to make it work. i updated it, redownloaded it, and finally used a "Netsh reset" code in the command prompter. this resulted in Itunes not even opening, and neither did my internet. i've no idea how to fix it or what to do. help?

    Try removing QUicktime and installing the stand alone version. Also check for incompatible software.
    Here is a method
    Have you installed any of the following:
    ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter, Mpcstar, (possibly starcodec pack, 3ivx)
    If so uninstall them.
    Then download the version of Quickime without iTunes:
    http://www.apple.com/quicktime/download/win.html
    Now Remove Quicktime using the method for Quicktime in this article (just Quicktime):
    XP
    http://support.apple.com/kb/HT1925
    Vista
    http://support.apple.com/kb/HT1923
    When you come to your C:\Windows\system32\ folder you can delete any file or folder with Quicktime in the name.
    Restart you computer
    Install the stand alone Quicktime and check if it starts.
    If it does you are in a position to find out if iTunes is OK.

  • Settings reset when Comp resta

    Since downloading 2.8.0004, whenever I restart my computer ALL my sound settings reset to stock settings. (Volume settings, Mic settings, etc). So everytime I restart my computer I need to go through all my settings and put them back where I want them.... EVERYTIME. I tried to figure it out on my own, but I'm at my wits end.
    Any help you guys could give me would be very much appreciated.
    System Specs
    SoundBlaster X-Fi ExtremeGamer
    Asus P5N-D
    Intel Core2 Quad CPU Q9300
    Nvidia EVGA 8800gtx
    Vista Home Premium x64
    4gb Mushkin Extreme RAM
    Anything else you need, please let me know.

    Hello Nafets727,
    You might want to check this thread.

  • IPhone 4S 5.0.1 Update Improves Battery w/ Settings Reset

    After installing the update make sure you reset all setttings. I have done a few updates now  and  have had much better  sucess after settings reset all. Standby drain has been virtually eliminated from 2-4% hr before update. It is located in settings/reset//reset all settings. You loose some wifi and desktop settings, but data, apps, etc remain intact.

    freddy,
    you don't really need to completely restore as new phone, but reset all settings in my experience and do a full drain and recharge.  it is located settings -> reset -> reset all settings.  this clears all the basic settings (i.e. wallpaper network, etc) back to default, but still keeps all of your apps, email and data as they were.  when it reboots though choose "setup as new phone" after you go throught the basic questions (i.e. lang, location, siri ) setup.  your apps, data will still be there as before.
    still midway through my second day (east coast) and after nearly 5 hrs of standby and 30 minutes of data usage, battery is at 93%.
    ps: does the mk5 refer to a golf... i have a mk6 tdi

  • HT5569 4S phone to IOS 7.1.2 and lost my wi-fi.   The wi-fi is on, but can't find ANY networks.   I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 an

    I updated my 4S phone to IOS 7.1.2 and lost my wi-fi.   The wi-fi is on, but can't find ANY networks.   I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 and lastly going to the Apple store for help.   They tried all the exact same steps I did, took the phone apart and looked at and said it is in "pristine" condition.   They have no idea why it isn't working, but they could offer to sell me another phone.    This is extremely annoying!    They claim it has nothing to do with the update to 7.1.2, but that is when I lost the wi-fi, so it has to be related!

    My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again... 

  • What is the reset code in lumia 710

    reset code in lumia 710

    Is this what you are looking for?
    http://www.nokia.com/gb-en/support/product/lumia710/faq/?action=singleTopic&topic=FA140408

  • Hi, I have iphone 4s and since yesterday my personal hotspot will not work. It's always worked fine in the past and I have a plan with three uk which includes tethering. I've tried everything I can think of including resetting network settings, resetting

    Hi, I have iphone 4s and since yesterday my personal hotspot will not work. It's always worked fine in the past and I have a plan with three uk which includes tethering. I've tried everything I can think of including resetting network settings, resetting the phone as a new phone but nothing works. When connected to the pc it shows on the iphone screen '1 connection' but the pc says 'no internet connection' I've spoken to three who say it must be a phone fault. Any help appreciated. :-)

    If you have restored as new that pretty well covers software issues
    Looks like a trip to an Apple Store and a likely Out of Warranty exchange unit  £159 over the counter
    May e consider an upgrade with the money ?

  • After draining battery, Safari cookie settings reset

    I am having an issue where the Safair Cookie settings reset after draining the battery. Is anyone else seeing that? Is there any work-a-round to prevent that from happening.
    The Accept Cookies gets set to "Never" which makes it hard to do things like GMail, etc..
    It also happens on my wife's phone which is running iOS 5.0.1.
    Thanks for any insight!

    ... and more info from last night.
    Last night, before I went to bed I checked gmail. It worked perfectly. I double-checked that cookies were set correctly. The phone was on the charger all last night. When I woke up Accept Cookies was again set to "Never" and gmail wouldn't load.
    Arghhh.

  • "Show Print Tiling" does nothing despite document bleeds and settings reset in Illustrator CC

    I'm having an issue with the "Show Print Tiling" menu option not working at all.
    I have setup a bleed for my document and have even tried a settings reset.

    Sure thing
    I am following the Train Simple training for Illustrator CC.
    Here is their new document settings
    and here is mine
    here is their screen after turning on "show print tiling"
    and here is mine, notice the lack of dashed lines inside the artboard.
    Thanks,
    Christian

  • I recently had my settings reset and now I can't get my emails or texts unless I'm at home.  What do I need to do?

    recently had my settings reset and now I can't get my emails or texts unless I'm at home.  What do I need to do?

    I'm going to assume the reason your able to get them at home is because your connected to wifi?
    Can you do anything else when connected to cellular data?
    Have you contacted your cell phone provider re: the issue.

  • IOS 7 keyboad freeze also after settings reset

    After updating to iOS 7 on iPad 2 the keyboard is slow or freezes.
    Settings reset helps until you re-enter your password!
    Please help! The iPad has become useless without a keyboard!

    You probably need to do a soft reset.
    Reset iPhone
    Note: This will not delete any data.
    To reset iPhone, hold down both the Home button and the Lock button until you the screen goes dark and the Apple logo appears.
    This should solve your problem.
     Austin

Maybe you are looking for