Settings reset when Comp resta

Since downloading 2.8.0004, whenever I restart my computer ALL my sound settings reset to stock settings. (Volume settings, Mic settings, etc). So everytime I restart my computer I need to go through all my settings and put them back where I want them.... EVERYTIME. I tried to figure it out on my own, but I'm at my wits end.
Any help you guys could give me would be very much appreciated.
System Specs
SoundBlaster X-Fi ExtremeGamer
Asus P5N-D
Intel Core2 Quad CPU Q9300
Nvidia EVGA 8800gtx
Vista Home Premium x64
4gb Mushkin Extreme RAM
Anything else you need, please let me know.

Hello Nafets727,
You might want to check this thread.

Similar Messages

HP Design jet 500 42-in. Ip settings reset when powered down or unplugged.

HP designjet 500 42-in
when configuring the ip settings on the printer via the frount panel or via webpage, settings seem as though there saved. However when powering down or up plugging the printer the IP settings reset to default.

To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How do I download the music from iTunes onto an old iPhone 3gs? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my old iPhone.

How do I download the music from iTunes onto an old iPhone 3gs without affecting my iPhone 5? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my current iPhone. iTunes won't let me change the device name for the 3gs. I just want to use the old iPhone like an touch.

Hi littlemansa,
If I am understanding you correctly, it sounds like you are returning to an old iPhone that has been erased and you would like to set it up as a new device without restoring from a backup which would affect the name of your iPhone, as well as the contents therein. I have an article for you that can help you set up your iPhone as a new device, and that information can be found below:
How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
http://support.apple.com/en-us/HT4137
Basically, it seems like you may be stuck on a screen that is asking if you would like to restore your device from the backup that is filed under the name of your new iPhone, or if you would like to set up the device as a new device. I would suggest that you set it up as a new device to achieve your desired results.
Take care, and thanks for visiting the Apple Support Communities.
-Braden

I reset my network settings, and when I went to join my wifi network i typed in the correct password, but it will not let me join. Other iphones and devices can however....

I reset my network settings, and when I went to join my wifi network i typed in the correct password, but it will not let me join. Other iphones and devices can however....

Try rebooting the router

Help! Upload 8.1 on my iPad 2 and now I can't get any wifi nor can I reset any settings. When I try to go on my iCloud it is all greyed out and no longer recognizes my password.

Help! Upload 8.1 on my iPad 2 and now I can't get any wifi nor can I reset any settings. When I try to go on my iCloud it is all greyed out and no longer recognizes my password.
I also can't turn off "Find my iPad" on iTunes in order to do a restore.

Try a reset first. Hold down on the sleep and home buttons at the same time until the Apple logo appears on the screen. It takes about 10 seconds. After the iPad restarts, see if you can get into your settings.

My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

When I relaunch firefox 8 the proxy server settings reset back to Manual even after I change to autodetect

When I relaunch firefox 8 the proxy server settings reset back to Manual even after I change to autodetect

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

I can not rest my icloud pasword when ican rest for my apple id

I can not rest my icloud pasword when ican rest for my apple id iwant your help

Hi Zmzmgold,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iCloud password.
iCloud: Change your iCloud password
http://support.apple.com/kb/ph2617
Your iCloud password protects the privacy of the information (such as your email) stored in iCloud. Your password also protects your ability to locate or remotely erase your device using Find My iPhone. You should regularly change your iCloud password to protect your information.
Important: If you use the same Apple ID for iCloud as you do with other Apple services such as the Apple Online Store, iTunes Store, Mac App Store, or to purchase products in iPhoto or Aperture, changing your iCloud password also changes your password for these services. Make sure you sign in to those locations using your new password.
Change your iCloud (Apple ID) password
Go to the My Apple ID website (appleid.apple.com) and follow the instructions to reset your Apple ID password.For more information, see the Apple Support article Apple ID: Changing your password.
After changing your iCloud password, make sure you update it on all your devices and in any email apps you use to get your iCloud email.
On your iPhone, iPad, or iPod touch: Go to Settings > iCloud, then tap your iCloud account.
On a Mac: Open iCloud preferences.
On a Windows computer: Open the iCloud Control Panel.
In your email apps: Check the help provided for the email apps you’re using.
If you set up iCloud on your iPhone, iPad, or iPod touch, make sure to set up a passcode lock on your device (Settings > General > Passcode Lock) for added security.
I hope this information helps ....
- Judy

HT201342 Can I get my old pic back the one get erased when I rest my phone

Can I get my old pic back the one get erased when I rest my phone

You can if it was in your camera roll when you last backed up to iCloud, but you will have to restore the entire backup to recover it (not just photos). If you want to do this, it has to be done in the initial setup process. If you have any data on your phone now that is not in the backup that you want to save you'll need to do that first. Then go to Settings>General>Reset and tap Erase All Content and Settings. You will then go through the setup screens as you did when the phone was new. When given the option, choose Restore from iCloud Backup (see image below). Be sure you are connected to wifi and your charger as this will take some time to finish.

IPod touch 4 gives message "Cannot Download" "there is not enough available storage to download...You can manage your storage in settings." when trying to update or install one but not all apps. I have more storage than the app takes. Can u help?

iPod touch 4 gives message "Cannot Download" "there is not enough available storage to download...You can manage your storage in settings." when trying to update or install one of the apps, but not other apps. I have more space available than needed for the app. What do I need to do to fix this problem? Do I need to completely reset this device as new and, if so, how should I do that?

You need to delete some item (apps, music, photos etc) from the iPod,.However, sometime files get corrupt. To determine that connect the iPod to your computer and click on the iPod under Devices in iTunes. How much storage is used by the "other" category. If over 1 1/2 GB that indicates corrupted files.
To get the "other" down to normal value you need to restore your iPod usually restoring from backup works but sometimes restoring to factory settings.new iPod is required./

How can I remove the pictures in photo stream? I have already turn off my photostream at the settings but when i turn it on again, the pictures still come out?

How can I remove the pictures in photo stream? I have already turn off my photostream at the settings but when i turn it on again, the pictures still come out?

Ok you can reset the stream from www.icloud.com
Goto www.icloud.com
Login with your iCould username and password.
and login
Then click on your name in the top right hand side of the screen next to sign out,
it opens a window Account details with Language, Time Zone, Advanced
Select Advanced - Then click Reset Photo Stream. and confirm, the stream will be reset and totally deleted
I still think you should be able to remove individual pictures though, a blured image etc is a problem

Settings reset code?

Does anyone know the code for a total settings reset on the N95 please

It must only be in a few thousand posts on these forums so pretty obscure.
Revert to factory defaults: *#7780#
Soft reset: *#7370#
Hard reset: power off. Hold down '3', '*' and 'call'. Power on with those buttons pressed. Release them when the phone shows the nokia "handshake" logo or the language selection screen.
Do a backup first - these procedures will wipe your settings at least, and the resets will wipe everything in the phone's central memory (but not the content of the memory card).
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

ColdFusion Builder 3 Settings Reset on Restart

I've downloaded the ColdFusion Builder 3 trial and am experiencing some odd and very annoying behavior.
I've customized some code editor text font and color settings. I've added an entry to the CF Servers panel for an instance of ColdFusion 10 running inside a VMWare virtual server on my laptop.
When I restart Eclipse, all the code customizations I've made are reverted back to the default install settings and the entry in my CF Servers panel is gone.
I've been an IntelliJ user for well over a year, but in doing much more cfscript-based development the CF Plugin for IntelliJ is proving to be a hindrance so I thought I'd give CFB 3 a try and see if there were any improvements over CFB 2. However, I can't take this kind of behavior. Hopefully someone can give me a setting or someone else has seen this before and can give me an idea of where to start looking.
I have CF Builder installed as a plugin into Eclipse Kepler 64-bit for Mac. I added the CF Builder update site and have updated to CF Builder 3.0.0.290000. I also previously installed as the standalone version with no additional plugins and experienced the same behavior.
Anyone have any ideas?
Thanks,
Dan

Milan...
My apologies for taking so long to get back to this. I just did some testing tonight of your instructions as well as those by Kaif above.
Firstly, I installed ColdFusion 10 locally on my Mac. I added the local server to the CF Servers panel successfully. After restarting Eclipse, the localhost entry remained in the CF Server panel.
Secondly, I followed your instructions to make a new profile and make my font/coloring customizations in it. I restarted Eclipse and my font and color selections were maintained (through 3 restarts). I noted that my newly created profile was selected in Preferences after each restart.
I then added a remote CF 10 server to the CF Servers panel successfully (as noted by the panel telling me that the server was running and being able to launch the CF Admin from within Eclipse). At this point there were 2 entries in my CF Server panel--localhost and the one remote server that lives inside my VM. I restarted Eclipse and when it came back up, only the localhost server remained. I might add that the VM has ColdFusion 10 installed in "multi-instance" mode and that the remote server instance that I added to the CF Servers panel was one of 4 CF instances configured and running inside the VM.
All the while, my font and color customizations have remained the way I set them.
So, it appears as though we're down to just one bug relating to remote server registrations in the CF Servers panel.
I saw that another user was reporting something similar in this thread: ColdFusion Builder 3 RDS and Remove Server settings reset on each restart so apparently it's not just me.
Thanks to you and everyone else for all the ideas and troubleshooting help thus far. At least at this point I think I might be able to use this for day-to-day coding, even though I really want the remote server system to work correctly so I can use the step debugger feature again.
Dan

Palm TX does a soft reset when I tap on memos

I am new to posting on this forum. My Palm TX does a soft reset when I tap on memos or push the button I have set to memos. I also have had several soft resets occur after tuning the my palm on from the On/Off button. I have had Palms for the last 10 years. Never had this problem. The only problem I had was the On/Off button on The TX failed as a result this is my 3rd TX in the last 4 years. Any suggestions welcome. I was behind on syncing and my last sync was done about 1 week before this problem occurred. I really do not want to do a hard reset. This problem has been going on for a month. Can I just do an unistall/reinstall without loosing any info?
Post relates to: Palm TX

This question has been asked and answered many times here... Somehow, the memos database has become corrupt on the device. There are two ways to fix this:
1. First, open Palm Desktop and go up to Tools/Options/Tools Tab and click the Check Records button. Let it look for corrupt records, and if none are found then a simple fix is to set your HotSync Manager setting for the Memos app to "Desktop overwrites Handheld" for one operation.
If using Palm Desktop 4.x, change the conduit here: Click on your HotSync Manager icon in the tool tray, and select "Custom". Make sure your HotSync Account name is showing in the top window, then highlight the Memos app and click the "Change" button. Click the selection for "Desktop Overwrites Handheld" and click "Done". (DO NOT select the "Set as Default" box!) Now do a HotSync. Since you didn't select "Set As Default" it will only do the overwrite for one operation, then default back to "Synchronize".
If using Palm Desktop 6.2.x, change the conduit here: Click on the HotSync Manager icon in the tool tray, and select "Settings". Make sure your HotSync Account name is showing in the top center window, then click the "Applications" link in the left column. Check the box for "Show Details", Highlight the application you wish to change, then click the "Configure" button. Click the bullet for "Desktop Overwrites Handheld" and DO NOT select the "Set as Default" box. Now do a HotSync. Since you didn't select "Set As Default" it will only do the overwrite for one operation, then default back to "Synchronize".
Check to see if the HotSync completes without errors, and your Memos application is back to normal.
2. If the above does not fix the problem, then download and install "DBFixit" from Pimlico Software: http://www.pimlicosoftware.com/dbfixit.htm The program will search your device for errors, and fix some for free. Others may require the purchase of a registration code, with the funds going to an animal rescue non-profit (Gorilla Haven).
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

HT4890 I received a pop up on my ipad saying Not Enough Memory with two choices, Close or Settings. When I touch either button on the screen nothing happens. It seems that the screen is frozen. Does anyone know how I can get rid of this pop up.

I received a pop up box saying Not Enough Storage with two choices. Close or Settings but when I tough either one nthing is happening and my ipad seems to be frozen
Has any one got an idea?

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

Settings reset when Comp resta

Similar Messages

Maybe you are looking for