Settings screen missing after 10.1 update

After 10.1 update my settings screen is missing.  When I try to open settings anywhere from device it trys to open and quits immediately.
How can revert back to 10.0 now??
Also my phone is heating up and battery is draining fast when screen is on.
Any solution... Please help
Solved!
Go to Solution.

Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
Now, try the settings screen again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • My URL/Address bar is missing after the delicious update. My search engine bar is missing after the Delicious update. I cant figure out how to turn them back on. rhouwan@*****.***, thank you.

    My URL/address bar is missing after the Delicious update.
    My search engine drop down menu is missing after the Delicious update.
    I can't figure out how to turn them back on, please advise, thanks.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Contacts numbers missing after IOS 5 update.

    Contacts missing after IOS 5 update.  I turned off my phone and turned it back on but only my email contacts were there not my numbers.  I updated it on my PC.

    Ok. So after too much of a fight with the iPhone, here is what i think got back the contacts on my phone.
    Step 1: Setting -> Mail, Contacts, Calendars -> iCloud : Switch off everything.
    Step 2: Go back to main setting page.
    Step 3: Make sure you see "Inactive" under iCloud.
    Step 4: Hit the home button
    Step 5: Close iTunes and start it back up.
    Step 6: Unplug your iPhone from the computer and plug it back in.
    Step 4,5,6 is to make sure you are starting a new session.
    Step 7: Sync iTunes.
    Step 8: Check your contacts. They should have come back up
    Step 9: Setting -> Mail, Contacts, Calendars -> iCloud : Switch on everything.
    Choose the option "merge" when you get it.

  • Sound effects missing after 2.0 update?

    Anyone else notice their sound effects (click, etc.) went missing after the 2.0 update? (and yes, "both" is checked under settings). Just wondered if this is universal or if something went haywire with mine...

    Sweet! The power of the collective on the web...
    Jeff - try this, worked great -
    unfortunately i lost all my info on my touch when doing this, but I can dedicate some time tonight to resetting my wallpaper, my mail settings, etc.
    i think the 'DFU' in these instructions means device firmware upgrade...found this on another forum where people complaining of same problem...
    1. Hold both the home and power buttons until the device turns off
    2. EXACTLY one second after the iPod turns off, release the sleep/wake button, holding the home button still ( the apple logo SHOULD NOT BE ON ).
    3. In about 20 seconds, you will see your iPod appear in iTunes, but the screen on your iPod will still be off. You are now in DFU mode.
    4. RELEASE the home button as soon as your iPod appears iTunes. If you fail to do so, your iPod will simply go back into recovery mode.
    yo Apple - please roll out some info on this 'known issue'; While $9.95 isn't a budget-breaker, if you have to figure out how to make that $9.95 work on your Apple device like it appears some of us are, it speaks to posting something in Support about it - thanks!

  • Edit screen explodes after 10.6 update

    Trying to apply edits in full screen mode after my 10.6 update causes the screen to completely wig out on me. The edits seem to work normally on the photo itself but the display will go anywhere from slightly fuzzy to completely illegible. I can back out of full screen and enter back in but the display is still very hit and miss.
    Anyone know a fix to this? I've already sent Apple a feedback notice.

    This has affected a number of users and currently there is no fix. Have you tried editing in Window mode?
    Regards
    TD

  • Touch Screen unresponsive after iOS 8 update

    My 1 year old 64GB iPhone 5 touch screen started to become unresponsive after iOS 8 update
    It's not consistent. Touch screen functionality will seize whilst phone is being used for either answering calls, typing messges, surfing, gaming etc and won't become responsive until it is turned off and on again (via power button). Home button is functioning with no problems.
    As the phone is now out of its warranty period I want to verify if it's the OS that's causing this or do I actually have a hardware issue.

    I have the same issue. iPhone 5, 1 year-old, not even a scratch.
    Sometimes my touch screen works, sometimes not. When it works, it is just for some seconds, then some phantom touches start to happen all over the screen, but specially, when i'm typing, it types z or m, when I try to type something in, and it receives it, it will act as z or m again....
    If I switch off my screen and switch on again... sometimes it will work, sometimes it wont... veeery unstable.
    I considered downgrading to 7.1.2 but since I heard it is ilegal I decided to wait for a new iOS release.... any suggestions? (already wiped it and the issue continued...)
    Is it really not recommended to downgrade it and have my phone funcionalities back?

  • Linked Smart Objects missing after last CC update?

    I had an update come across CC for Photoshop & Dreamweaver yesterday. After applying the update I'm finding that linked smart objects are missing from my File>Place menu. Anyone else having this issue? I had them before & now they are gone. CC shows me as having no updates available. Just checked Photoshop & it's showing I'm back at 14.0.

    Sounds like the updater failed and you are running 14.0.0 again.
    Uninstall and reinstall.

  • Settings screen unavailable after changing home screen

    I've just tried to change my home screen using the settings menu and one of the preloaded images. It didn't change the home screen, and now when i go back to the settings screen all I can see is that image. It won't respond to the select or cancel buttons. Everything else is working fine, but I'm panicking without access to settings. Help!

    Try closing the Settings app completely and see if it then works when you re-open it : from the home screen (i.e. not with Settings 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Settings app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Cannot Adjust Screen Brightness after Windows 10 Update

    I Cannot Adjust Screen Brightness after i update my windows 8 os to windows 10. please give me solution. thank you

    c00lajay wrote:
    I have tried uninstalling the Graphic drivers, re installing from hp assistant, I even tried directly from Intel drivers but it is not letting me adjust brightness =( Latest driver version to my 4400 Gcard was 27/07/2015 I guess we have to wait since those drivers are win8.1 compatible only =( 
    Hey, I tried updating the driver, I googled something like intel graphic 4400 windows 10
    Then I found this link
    https://downloadcenter.intel.com/download/25150/Intel-Iris-Iris-Pro-and-HD-Graphics-Production-Driver-for-Windows-10-64-bit
    read at descriptions to see compatible chipset.  After I downloaded it started installing and the screen starting to do the "power off" think it does whenever you're installing video drivers et voila!  ´the brightness went down and now my "brightness up and down" keys are working ='3 
    I hope this help you guys  

  • HT4623 my first gen i pad does not have the software update selection on the general settings screen.  How do I update software.

    My first gen iPad does not offer the software update option on the general settings page.  How do I update without this selection

    That only appears when you have iOS 5+ installed, you will need to do the update via your computer's iTunes.
    Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases - you may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
    You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972

  • Lock screen freezes after ios 7 update

    lock screen freezes after ios 7 update

    exactly what happened, the screen is locked on the plug sign, what can you do to unfreeze

  • Ipad mini retina blue screen issue after ios 8 update

    After update to iOS8 over wifi, my iPad Mini with Retina Display is working perfectly, however I had an issue twice since yesterday. While using it, I observed the screen became totally blue (like Windows crashing) and the ipad restarted. Anyone facing such issues?

    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

  • Contacts missing after IOS 5 update

    I updated my Iphone 4 to the ios 5.  Everthing is there except my contacts.  I checks settings /iCloud and contacts is checked.  I think if I uncheck, my contacts will return?  not sure.  I am afraid to sync again, because I don't want to backup iphone with missing contacts overwriting my last backup etc.
    How can I get my contacts back and sync with the Cloud?
    Help..
    Thanks

    Ok. So after too much of a fight with the iPhone, here is what i think got back the contacts on my phone.
    Step 1: Setting -> Mail, Contacts, Calendars -> iCloud : Switch off everything.
    Step 2: Go back to main setting page.
    Step 3: Make sure you see "Inactive" under iCloud.
    Step 4: Hit the home button
    Step 5: Close iTunes and start it back up.
    Step 6: Unplug your iPhone from the computer and plug it back in.
    Step 4,5,6 is to make sure you are starting a new session.
    Step 7: Sync iTunes.
    Step 8: Check your contacts. They should have come back up
    Step 9: Setting -> Mail, Contacts, Calendars -> iCloud : Switch on everything.
    Choose the option "merge" when you get it.

  • Settings App missing after iOS7 upgrade

    Decided to upgrade (if that is the word) from iOS6 to iOS7 last night on the iPad2 and have a number of issues but the main one if that the Setting App (icon) does not seem to be visible anywhere. Has anyone had a similar problem after upgrading to iOS7?
    I haven't done a hard reset as has been suggested (I am at work and don't have the iPad here with me) but anything else that can be suggested including how to rollback to iOS6 would be appreciated. One thing that I though may have contributed to this is the in iOS6 the settings icon was in a folder called "Entertainment" (one of the kids may have moved it there) so is it possible that it got lost due to being in a folder.
    Any help would be most welcome and greatly appreciated.

    This is my problem I don't have this icon so it is going to be difficult to try the solution ie. general-reset-reset home screen layout

  • Sent from my Blackberry missing after 10.2 update

    I have updated to the latest Z10 OS: 10.2  However since then the 'Sent from my BlackBerry' signature is missing.on emails.  Anyone know how to get it back.  Thank you.   Henry  

    Go to the Hub, tap email account, tap the three dots, tap Settings, tap Email Accounts, tap your email account, turn Auto Signature On, if on and the box below is empty tap the empty box, type what you like. Tap anywhere to close keypad, do not press and hold the spacebar like in texting to close the keypad it will put a space in what you typed or what is written there.

Maybe you are looking for

  • Unable to delete server from pool

    We are in the proces of upgrading oure OVM farm from 3.2.8 >> 3.3.1 (10 servers) The management server is allready upgraded to 3.3.1 + MySQL and we started on the servers last week. After reinstalling the first server we tried to add it to the pool.

  • How to use a Development Component in One Project

    Hi All, In my WebDynPro Project I am using Different tranactions in one application. I am planning to create each tranaction as a seperate WebDynPro Component and calling in the Main Componet in a single Project and Application. The sub components ar

  • Acrobat re-installs at the start-up every time I use the computer

    Every time I start a computer Acrobat keeps re-installing. First I get a message "Preparing to install" from the Windows installer. Then I get a message "Please wait while Windows configures Adobe Acrobat". And then I get a message "You must restart

  • IPod nano 6th generation doesn´t work

    I´ve got a new iPod nano 6th as an exchange unit. It works fine till i connected it with iTunes under Win7. First, the iPod appears in iTunes and a window was opened, i think, to accept the license rules. Unfortunetly i was distracted for about 5 min

  • Embedding continuous controller data into Quicktime

    Having some trouble here. I can add a music track (midi) in Quicktime 7 to another .mov, but if the .mid file contains continuous controller data it seems to get dropped. Or at least I've not been able to figure out how to enable that program stream