SETTINGS STO FOR STORAGE LOCATIONS

Hi all,
am new to this community.plz explain me is it necessary to do the settings in spro for sto for storage loacations and why??????

Hi Amrita,
First, Wel Come to SAP Community...........
Plz go through below STO config..........
Follow the below steps to to make STO between two plants belongs to different company company codes.It is also called as Inter Company STO.....
1)Create one Customer Master in XD01 with respect to Supplying Plant Sales Area and assign this Customer no with Receiving Plant in OLME->PO-> set up STO->Define shipping data for plant and for the supplying Plant assign the above sales area.( Make sure,In Customer Master,sales Area Tab: you are maintaining shipping condition)
2) For Receiving Plant Pur. Org and Co.Code Combination create Vendor master in XK01 and in this vendor master assign the Supplying plant in Pur.Org.Data screen->Extras--> Add.Pur.data
3) OLME->PO-> Set up STO------>For your supplying plant assign document type NB, Delivery type NLCC and Checking Rule RP
4)then For your supplying Plant and receiving Plant assign Document type NB
5)Make sure you are maintaining Sales View for the material at supplying Plant and in Sales /Gen plant Data view maintain Availability check, Loading group and Transportation group.
6) In SPRo-->Logistics execution> Shipping->Basic shipping functions->Shipping point Determination>assign shipping points-> For your Loading group,Shipping Condition and Supplying plant combination,Assign shipping point
these are the configuration settings you have to do in background.
Then Create STO from Receing Plant in ME21N with document type NB.
Based on that STO, Create Delivery in VL10B from supplying Plant
Do PGI in VL02N from Supplying plant
Do GR in MIGO at Receiving Plant keeping Outbound delivery as a ref. document.
Now your STO bet. two plants belongs to diff. Co.Codes will be completed.
For Intra-Company STO: ie)STO bet. Plants belongs to same Co.Code
1)Create one Customer for Supplying Plant Sales area and assign this Customer no with Receiving Plant in OLME---> PO -
> Set up STO -
> define Shipping Data for plants. and maintain the same sales area in your Supplying plant.
2) In OLME---> PO -
> Set up STO.....for your Document Type: UB and Suppying plant Combination assign Del. Type NL and Checking rule RP
3) In OLME---> PO -
> Set up STO...for your Supplying Plant and Receiving Plant combination Maintain Doc. Type : UB
Make sure you are maintaining Sales View for your Material at Supplying Plant.
4) Maintain Shipping point at, SPRO----> Logistics Execution -
> Shipping -
> Basic Shipping Functions -
> Shipping Point Determination for Plants.....there for your Loading group,Shipping Condition, Shipping Plant combination maintain Shipping plant..
Now Create STO in ME21N with Doc.type: UB at Receiving Plant.
Then Create Delivery in VL10B from Supplying Plant...
Then Do PGI in VL02N from supplying Plant.
Then do GR at Receiving Plant based on Outbound Delivery at Receiving Plant...
For Intra-Company STO:
1)Create one Customer for Supplying Plant Sales area and assign this Customer no with Receiving Plant in OLME---> PO -
> Set up STO -
> define Shipping Data for plants. and maintain the same sales area in your Supplying plant.
2) In OLME---> PO -
> Set up STO.....for your Document Type: UB and Suppying plant Combination assign Del. Type NL and Checking rule RP
3) In OLME---> PO -
> Set up STO...for your Supplying Plant and Receiving Plant combination Maintain Doc. Type : UB
Make sure you are maintaining Sales View for your Material at Supplying Plant.
4) Maintain Shipping point at, SPRO----> Logistics Execution -
> Shipping -
> Basic Shipping Functions -
> Shipping Point Determination for Plants.....there for your Loading group,Shipping Condition, Shipping Plant combination maintain Shipping plant..
Now Create STO in ME21N with Doc.type: UB at Receiving Plant.
Then Create Delivery in VL10B from Supplying Plant...
Then Do PGI in VL02N from supplying Plant.
Then do GR at Receiving Plant based on Outbound Delivery at Receiving Plant...
Follow the below steps to to make STO between two plants ( different company company codes).It is also called as Inter Company STO.....
1)Create one Customer Master in XD01 with respect to Supplying Plant Sales Area and assign this Customer no with Receiving Plant in OLME->PO-> set up STO->Define shipping data for plant and for the supplying Plant assign the above sales area.( Make sure,In Customer Master,sales Area Tab: you are maintaining shipping condition)
2) For Receiving Plant Pur. Org and Co.Code Combination create Vendor master in XK01 and in this vendor master assign the Supplying plant in Pur.Org.Data screen->Extras--> Add.Pur.data
3) OLME->PO-> Set up STO------>For your supplying plant assign document type NB, Delivery type NLCC and Checking Rule RP
4)then For your supplying Plant and receiving Plant assign Document type NB
5)Make sure you are maintaining Sales View for the material at supplying Plant and in Sales /Gen plant Data view maintain Availability check, Loading group and Transportation group.
6) In SPRo-->Logistics execution> Shipping->Basic shipping functions->Shipping point Determination>assign shipping points-> For your Loading group,Shipping Condition and Supplying plant combination,Assign shipping point
these are the configuration settings you have to do in background.
Then Create STO from Receing Plant in ME21N with document type NB.
Based on that STO, Create Delivery in VL10B from supplying Plant
Do PGI in VL02N from Supplying plant
Do GR in MIGO at Receiving Plant keeping Outbound delivery as a ref. document.
Regards,
Raghunath

Similar Messages

  • Excise for STO for Storage location

    I have a requirement whre i want to create Excise invoice for STO between storage location, as i already raised this doubt in SD community, but did not got the satisfaction.
    As i want to use the same excise NUMBER series which is assingned to excise document when i create Excise with reference to Billing Document.
    Plz guide how i will configure for Excise for STO in case of Storage location transfer and how i will maintain the same series for the EXCISE which i have created for when i create excise with referecence to my billing document.

    not required

  • STO for storage location to storage location with delivery charges

    Dear Users,
    Please advice the configuration & pre-requisites for storage to storage location STO with delivery charges within a plant.
    Thanks & Regards,
    Shyam

    Moderator message:
    Please put some efforts into a search
    Storage location to storage location stock transfers have been many times discussed as well as delivery charges in UB stock transfer order.
    Do not just post your requirements and expect others to do your job.
    If you dont know how to search, then please see these blogs:
    A good way to search the forum is with google. See this blog with details for a good search
    Getting the Most out of Google: Optimizing Your Search Queries
    This blog describes how to use the SCN search:
    How to use SCN search
    The discussions are not a replacement for proper training
    Thread locked

  • Use of Vendor and Customer in 'Define Shipping Data for Storage Location"

    Under the stock transfer order configuration, there is a IMG step <b>"Define Shipping Data for Storage Location".</b>
    In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
    The customer number is used a sold-to-party in outbound deliveries.
    <b>But I am not able to figure out what's the use of VENDOR number we are specifying in this step.</b>
    If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
    <b>Also I need to know what vendor account group I will use for creating this storage location vendor.</b>  I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
    <b>So I need to know-
    1. Which account group to use for creating storage location vendor
    2. What's the ultimaye use of this vendor code
    3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.</b>
    Thanks

    Hi,
    Define Shipping Data
    Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
    A goods receipt can be planned in the receiving plant.
    You can enter a vendor (transport vendor) in the stock transport order
    In IMG step "Define Shipping Data for Storage Location".
    You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
    Rewards If usful
    Regards
    Sanjay L

  • STO Between Storage location configuration

    Hi,
    We are using STO configured for Plant to Plant stock transfer.
    Now we wish to configure STO between Storage Location
    We wish to know whether STO between Storage locations can be used along with STO between Plants.
    We are in ECC 6.0.
    Regards,
    Kiran

    Hi Kiran,
    Yes, you can use STO with plant to plant as well as STO with st.loc to st.loc. but the plants have to be differnet plants.
    Check the customizing for st.loc. sto in ECC 6.0
    Cheers,
    Satish Purandare

  • Authorization Check for Storage Location

    Hi Experts,
    I have the following requirement :-
    I have Plant : P081 created under Company Code : P110.
    I have got various Storage Locations under this Plant for example
    KT01 - Main Stores
    KT24 - Remote Store.
    The KT24 store is basically a remote location store. I have activated the Authorization for the Storage Location KT24 in the SPRO Settings
    Material Management --> Inventory Management and Physical Inventory --> Authorization Management --> Authorization check for storage location.
    I have maintain the following authorizations for the Object M_MSEG_LGO as follows :-
    1. OBJECT : M_MSEG_LGO.
    >> 2. USER ID : 081Store
    >> 3. PLANT : P081
    >> 4. STORAGE LOCATION : Kt24
    >> 5. ACTIVITY : 01-03
    >> 6. MOVEMENT : 101, 102, 201, 221, 261
    and authorization for T_code MIGO_GR and MIGO_GI . I want to restrict the user for transaction only for this storage location but the system is allowing the user to post GR document for KT01 stores also.
    Can any one suggest a solution or settings that need to be done for the user to be restricted to prepared GR for Storage Location KT24 only.
    Thanks in advance.
    AJ

    Hi,
    You set the authorizations to users with tcode PFCG. To know the reason of deny some access run tcode SU53 after SAP denies the access to some documents / objects.
    Regards,
    Eduardo

  • Report for Storage location wise Stock with value..?

    Hi guru's
    Can anybody explain me what is T.code i want to use to get a report for STORAGE LOCATION STOCK  with VALUE..?
    Urgent reply me  ..
    Thanks
    sap-mm

    Sorry Mr chetan,
    I want to see only the stock available in my company with Value and storage location wise..
    Please try to get report for this
    Thanks
    sap-mm

  • System asking for storage location in case of Asset GR,

    dear all,
    In our case  system is asking for Storage Location in case of Asset GR, though PO was account assigned.
    I checked for the screen setting, but not getting any clue where to find that entry to make depressed.
    Pls guide,
    Regards.

    Hi,
    Are u using material code for assets or its a text based purchase, if material code is there (although non valuated / qty managed) it will still require sloc as system needs to store the qty in stock
    Reg
    dheeraj

  • HU Configuration for Storage Location

    Hi everyone.
    In the following point of config, there is something I do not understand.
    I hope somebody can explain it to me.
    HU Requirement for Storage Locations and Default Values for Deliveries
    Are the Vendor and Customer needed in this table?
    If they are, what purpose do they serve? What are they needed for?
    And again, if they are, do they represent the Plant? or what?
    Should they be created with special characteristics?
    I know a lot of questions, But I do not understand.....
    Thanks,
    Alain

    Hello Alain,
    When you are making the storage location is HU managed, and when you try to execute any IM transactions like stock transfer, transfer posting, system doesn't directly post a material document unlike in regular non HU managed locations.
    For example if you try to execute MB1B-311 from HU managed location to non HU location, system tries to create an outbound delivery document. And to create this outbound delivery document you need a customer and this is the place where system gets that customer information. Same is the case for vendor in inbound delivery.
    And it doesn't require to create deliveries all the time if you want to execute these inventory transactions. VLMOVE transaction can be used to posting material document without deliveries.. But not all business scenarios will use VLMOVE as it has its own limitations.
    Regards
    Gopal

  • Negative stock  for storage location M7 021

    Hello
    I use negative stock for some materials
    When I want to post document in MIGO - 551 scrapping, I have error message M7 021: Deficit of BA Unrestricted-use 1.100 EA:   24000641 XXXX 9999 YYYYYYY
    This is ERROR. When I change storage location from 9999 to 0002 message have status WARNING.
    I set - allowed negative stock in material master data MM02 and for plant in WB02
    Where should I set "allowed negative stock" for storage location, because I need warning for location 0002?
    Could You help me?
    Thank You in advance
    Arek

    Go to SPRO>MM>IM>Goods Issue/Transfer posting>Allow negitive stock allowed for plant and then chose the plant and then go for the storage location --> mark the same.
    If use ful award points

  • Table name or report to download materials for storage location

    Hi ,
    Please let me know table name or report or tcode to download material for storage location . I know MARD only. Apart from that table any other please let me knw
    Thanks in advance
    Smitha

    Hello,
    For Material , Plant and storage location report, in SAP Std reports are available.
    1)MC.6
    2)MC.9
    3)MB5b
    4)MB52
    or else get directly from table MARD through SE16 tcode.
    Regards
    Mahesh Naik

  • Problem in Address update for storage location via LSMW

    I am trying to update the address of storage location thru LSMW,
    Normally when i run OX09 i get the "dialogue structure' in LHS panel but when I do the recording of OX09 in LSMW, I am not getting the "Dialogue structure" LHS panel & hence I can't go to the 'Addressees for storage location'
    How to get the ""Dialogue structure" in LHS while recording in LSMW so that I can update the address also.
    Currently my recording only takes me to the create storage location & no LHS 'dialogue structure'  for 'Addressees for storage location'
    Please give the suggestions as I its on urgent for me to update 1000 storage location.

    Dearrrrrrr Prasoooon,
    U got it Right Again!!!!!
    Thank you so much.
    I resolved with above Note & now i can happily go on leave from tomorrow.
    Salute to you!!!!!!!!

  • Table for Storage location name..

    Hi frnds,
    I have a storage location number.. Now how do i find the name or Description for that?
    How to find the table? ,, If anybody knows the table name plz let me know..
    Thank you.
    Sree.

    Hi,
       CHeck Table MARD for storage Location
    Regards,
    Prashant

  • Classification System for Storage location

    Hello,
    I would like to know if you can apply the classification system (as we know it well from the material master), to classify the storage location configuration. I need this for a client who wants to analyze his information system with the possibility to drilldown the characterics of his storage locations. But to do this, he first would have to apply the classification system to these storage locations, but I can not figure out if it is possible, and where to customize it.
    Thank you in advance for your help,
    Dominik Ley
    DTI Consultores
    Chile

    yk,
    perhaps it is even some kind of weird, but for 2 reasons I dared to make the question:
    - Classification system is a cross-application component (Material Management, Project System, etc.), so why not for something like storage location.
    - For Plants you DO HAVE this classification. Go to CL02 and have a look on matchcode of 'Class type' field. So, my idea was to check if there was something similar for storage location.
    If you do have any other idea, or anyone else, I appreciate a lot your help.
    Regards,
    Dominik Ley

  • Table for storage location addresses

    Hi
    I am trying to find the table where addresses for storage locations are found. I have found the storage locations in T001L and the addresses in ADRC, but cannot find the link between these tables.
    In which table can I find the link between storage locations and addresses?
    Any help is greatly appreciated.
    Regards

    Hi,
    check TWLAD table.
    Regards,
    Chandra

Maybe you are looking for