Settings Tab??
To set the iPod Shuffle to use the iTunes volume settings, the help manual provides the following instructions (p.17), which I've followed up to the Settings Tab part:
1. In iTunes, choose iTunes > Preferences if you are using a Mac,
2 Click Playback and select Sound Check.
Done.
To set iPod shuffle to use the iTunes volume settings:
1 Connect iPod shuffle to your computer.
2 In iTunes, select iPod shuffle in the Source pane.
Done.
3 Click the Settings tab.
Ok, what Settings Tab? I've gone through every pull-down menu, scoured the iTunes screen, right clicked, left clicked all over the place, and I do not see a Settings Tab. The help manual refers to the Settings Tab several times, but there is no visual to indicate just where the Settings Tab is!!
Please help. I feel really stupid because I'm sure I'm missing something obvious. However, I've encountered several instances in which the Apple folks describe a feature or function and (incorrectly) assume that everyone knows what they're talking about.
Uh oh. I'm on the verge of a rant. All I really need is help finding the darn Settings Tab for my nifty new 2gen Shuffle!
Thank you!
Mary
powerbook Mac OS X (10.3.9)
powerbook Mac OS X (10.3.9)
To set iPod shuffle to use the iTunes volume
settings:
1 Connect iPod shuffle to your computer.
2 In iTunes, select iPod shuffle in the Source pane.
Done.
3 Click the Settings tab.
Ok, what Settings Tab? I've gone through every
pull-down menu, scoured the iTunes screen, right
clicked, left clicked all over the place, and I do
not see a Settings Tab. The help manual refers to
the Settings Tab several times, but there is no
visual to indicate just where the Settings Tab is!!
Please help. I feel really stupid because I'm sure
I'm missing something obvious. However, I've
encountered several instances in which the Apple
folks describe a feature or function and
(incorrectly) assume that everyone knows what they're
talking about.
Uh oh. I'm on the verge of a rant. All I really
need is help finding the darn Settings Tab for my
nifty new 2gen Shuffle!
Hold on... When you click on the shuffle under Devices, what happens? Do you see a screen that's labeled "Contents"? If so, look at the top of that screen and click on the tab to the left of the "Contents" title that says Settings...
Similar Messages
-
I am the owner of this GPO and I can view the settings tab in any other GPO. But, I get the following message when I try to view the settings tab in one particular GPO:
An error occurred while generating report:
Object reference not set to an instance of an object.
Other posts I look at reference the same error, but with different circumstances, and thus, they specify that the hotfix is for to fix the error under
those circumstances.
I'm accessing GPMC on a Win 7 SP1 machine. DC is Server 2012 Standard.> Since I have to go through Edit to see the settings, and peruse the
> entire massive folder of settings to try to identify the bad one, it has
> been slow-going and I haven't found it yet.
You can filter ADM templates to show configured ones only, and you can
use the "show all settings" node. This will speed the work up - a little
bit at least :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Media Encoder CS6 Avid DNxHD video codec settings do not update in video settings tab
I want to encode a file to Avid DNxHD, but I am unable to change the resolution in the codec settings. I am choosing Avid DNxHD codec within the video codec tab, then clicking on codec settings and choosing a resolution from the resolutions pulldown menu. It will let me choose different resolutions from that menu, but after I hit okay, it has no effect on changing the video settings the way it's supposed to. For instance, if I try to encode a file that is 1280x720 with a source frame rate of 23.98, and I choose 1080i/59.94 DNxHD 145 8-bit, the frame size and frame rate does not change in the video settings tab. I am running Media Encoder CS6.0.2 on a Mac with OS 10.8.4. I am using Avid quicktime codecs v.2.3.7, because my system is running Avid Symphony 6.0.2.
Any help would be greatly appreciated!No one ever responded unfortunately and I never figured out a work around.
In Media Encoder CC there is a system preset for DNxHD MXF which I've used
to yield Avid files. The weird thing is that the CC version does the exact
same thing as the CS6 if you choose quicktime, DNxHD codec, and try to
change the codec settings. None of the settings update. If you find out
anything more about this I'd appreciate getting an update. Thanks! -
Hi,
I recently updated to 11.01 for iTunes. But, my library only shows certain playlists. My I can't find the settings tab to show all the songs IN my library, or the songs that I have on my iPod. Any suggestions?See Empty/corrupt library after upgrade/crash and this post on making iTunes 11 seem more familiar...
tt2 -
how to update iphone 4 software but there's not a choice to update software in settings tab? Thoughts
Welcome to the Apple Support Communities
Connect the phone to the Mac or PC and iTunes will ask you to update to the most recent version -
I cannot access the settings tab in the management console
I am in the management console for my verizon d-link router and i cannot access the settings tab..
i got to the router/verizon management console via the default gateway ip address and used the default password which worked and then tried to access settings which im assuming is the same default password.. however when i try to use the default password on the settings tab when im prompted it says that it is wrong.
is there some different password for the settings tab?collado144 wrote:
I am in the management console for my verizon d-link router and i cannot access the settings tab..
i got to the router/verizon management console via the default gateway ip address and used the default password which worked and then tried to access settings which im assuming is the same default password.. however when i try to use the default password on the settings tab when im prompted it says that it is wrong.
is there some different password for the settings tab?
Have you tried to go here and select your Gateway, then follow the trouble shooting tips. Most gateways/routers default passwords at one point were changed to the serial number for security reasons. If that does not work, you may try resetting the gateway/router to get back to the default. Never leave your gateway/router with the default passwords. If you get into the gateway/router a Verizon firmware upgrade if it is a Verizon model, may even change the default password to the serial number so it is not the standard D-Link that is used with all their gateways.
DSL help.
http://www.verizon.com/Support/Residential/Internet/highspeedinternet.htm
The DSL Gateways can be found here.
D-Link 2750B Gateway?
http://www.verizon.com/Support/Residential/Internet/HighSpeed/Networking/2750BGateway/ATLAS6561.htm
There is a wealth of online information also available here.
http://www.verizon.com/Support/Residential/Internet/fiosinternet.htm -
Where is the settings tab/button?
I can't seem to find the settings button. I have looked for answers similar to mine, but no success. This is such a confusing web browser.! I thought maybe it would be near the star, down arrow, and home button..but it's not. So I looked under the orange Firefox thing. No luck. No matter where I look at, I do not find my solution. All I wish to do is change my homepage and a few other things. But I am having no such luck on changing my homepage. I thought maybe going into Control Panel --> Network & Internet --> Internet Options --> Change homepage (Internet Properties)..but that didn't solve my issue nether. I just don't understand why the developer did not place the settings tab/button right in clear view. The developer would have such more users if he/she changed the way the browser was set up. Please help! Thank you for your time.
Hello Lover2021,
For the next problem , it would require the toolbar to be updated.
Here is what i have obtained from the Norton Website.
''We recommend that you have the latest version of Norton Internet Security or Norton 360 installed. If you are not seeing the Norton Toolbar in Firefox 23, check and make sure you're running NIS, N360 or NSS 20.4.0.40. Please visit our Norton Update Center to receive the latest update.
You may need to run LiveUpdate and reboot a few times before your product is completely updated to the latest version. It will appear in the LiveUpdate history as Norton Toolbar Add-on for Firefox.
If you are running Firefox 23 and Norton Internet Security, Norton 360 or NSS 20.4.0.40, and still do not see the Norton Toolbar, please ensure the Norton Toolbar plugin is enabled. You can do this by clicking on the Firefox menu, selecting Add-ons, and then clicking Enable next to Norton Toolbar.''
Link for the above: "'http://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-23-Support-for-Norton-Toolbar/td-p/1001655"'
Please Report back if that helped .Thanks! -
Hi,
I have connected a Compact Rio 9068 directly to my computer (HP EliteBook 840 G1, Windows 7), and the system appears in the tree under Remote systems in MAX. However, the problem is that I can only see information under the System Settings tab, while the Network Settings tab is entirely empty (blank white page). I have tried to refresh and re-boot, log in as admin, but it doesn't help. I assume that I have to change some network settings on my computer but I do not know which and still think it is strange that nothing at all appears under this tab.The windows firewall is set to accept NI MAX for both office/home and open networks. Can anybody help? Below you see how it looks in MAX for the two tabs.
Regards,
Gloria
Solved!
Go to Solution.Hi Klas,
and thank you for your thorough response. But the network settings are still not visible.
I have checked both local and wired network to obtain IP adress automatically for TCP/IPv4, these settings were already default automatic so I did not change this. I've also deactivated the windows firewall completely. I can not find any other firewalls, have McAfee protection installed without firewall. The IP adress range stays the same under System Settings.
When I look at my networks in the cmd window, the information in the figure below is shown, (unfortunately in swedish), but the upper network is the primary wireless connection and the lower is Ethernet to local network connection. Both say that DHCP is active, is this correct? My computer is standing alone with direct connection to cRIO port 1 and wireless access to a network (hib.no) at my work place is active, should I turn all wireless connections off? I have deactivated by pressing the wireless button on my keyboard, so that it says "not connected" to the wireless network in the cmd window, but it does not change anything in MAX.
The latest Labview version and Real-time module is installed from NI download webpages, Real time module is also shown when looking in the software tree in MAX (see figure below).
I have followed the steps given on the NI support pages without any problems until I get to the network settings:
http://www.ni.com/getting-started/install-software/compactrio.
Also, I power off the cRio and restart my computer, and refresh in MAX between all steps that I try.
Kind regards,
Gloria -
Missing print settings tab in lightroom
Anyone know how to get the print settings tab in lightroom? I have the page setup tab--but not the print settings tab.
I was watching Julianne Koss on AdobeTV talking about printing in Lightroom 5. The left bottom part of her screen has two “tabs”—one says “page set up” and one says print settings. On my screen I only have “page setup”. A great deal of her talk is about Print Settings—this is where you choose the printer, the presets, the copies, the pages, the print settings, media type, color, color settings, print quality---pretty much everything having to do with printing. I don’t have that tab…VERY frustrating!
Hers looks like the first attached photo (see tabs that say page setup and print settings)
Mine looks like the second attached photo (see only page setup tab)
Thank you for your help.
Take care,
Maren Aberle
<http://www.firsttracksphotography.com/> www.firsttracksphotography.com
logo capture 2 -
I have a very specific problem, only with the Gmail page. This problem only occurs on Firefox. I get the Inbox page and see my messages, but I cannot do anything other than that. I cannot reply, forward, or open the Settings tab. Whenever I try to do anything of the sort, it remains jammed on "Loading..." and never changes the page. I do not experience this problem with the Explorer, so I have to use Explorer to work with my Gmail web account.
I have two yahoo accounts and I know as they 'improved' their servers I had periodic outages. It'd work fine on my webmail on my computer, webmail on the iPad, but not via the mail app. And it was stuff on their end. It may be a case of wait and see and you may need to eventually remove/readd the account on your iPhone.
When the issue is on their end, unfortunately there's not much for users to do beyond wait it out or find work arounds. -
Use of the Standard settings tab under 'User administration'
Hi all
In cFolders 3.1 , user administration --> Standard Settings tab page:
One can define the default settings for users that will be created
The default settings defined by the user administrator here are the default settings for each user when they enter cFolders.
My question is :- after making this setting as above ,Will all the users created using su01 inherit the default settings ?
What about users replicated from other systems using a batch program which copies them?
regards
KedarHi Kedar,
I think I replied your other post as well. Anyway, to answer your question - YES, these setting will apply to all users. The way it works is, once the user (created in su01) logs in, these settings will be applied as the defaults. Therefore, it should also work for users replicated from other systems using a batch program.
Cheers,
Lashan -
Some options couldn't be displayed in "Adobe PDF Settings" tab
I am using Acrobat x pro's PDF Printer, and want to deselect some options in the "Adobe PDF Settings" tab within "Adobe PDF printing preferences", but several options couldn't be display. they are
Rely On System Fonts Only; Do Not Use Document Fonts
Delete Log Files For Successful Jobs
Ask To Replace Existing PDF File
It is right with Acrobat 9.4 pro, but it is not normal with Arobat 9.4.3 or Acrobat x. How can i fix this problem?
os: Windows Server 2003 standard SP2 simplified chinese versionI believe you can set these preferences within the Distiller application.
No you can't.
What I want is to create postscript files(.eps) and embed the fonts in
them by selecting "print to file" of PDF Printer, so I don't know
whether it works to set options in Distiller.
If you're only looking to create a PS file you can use one of the Postscript-compatible drivers that come with Windows, and set them to print to file. -
Print Settings tab in the Print module is missing? (Windows 7)
The "How To" books always refer you to the Print Settings tab in the print module, but there isn't one in my Lightroom? How do I get around this?
Not sure which "How to" books you're referring to so hard to answer this. Which specific settings are you wanting to change/control?
(..but if it's actual settings within the Printer's control software then it's accessed by clicking on the printer button at the bottom of the panel.) -
Trying to REdownload purchased songs, where is the SETTINGS tab?
talked to APPLE this am, they helped with some directions. but, im a idiot!! where is the SETTINGS tab to get started?
i am trying to REdownload purchased songs that i lost when computer died. thanks....William Bach wrote:
where is the SETTINGS tab t
On what ?
Download Past Purchases > http://support.apple.com/kb/HT2519
Sign in with the Apple ID that you used for the original purchase. See which Apple ID you used to download an item.
2 ) See if the content is available for redownload. Previously purchased items might not be available if they're no longer on the iTunes Store. -
Where is settings tab on iTunes
I can't find the settings tab on tune on my Mac . Does anyone know where the settings tab is on iTunes on a mac
iTunes menu > Prefernces.
Maybe you are looking for
-
Default-charset in oc4j 10.1.3
Hi, We are planning on migrating to OC4J 10.1.3. It seems default-charset in global-web-application.xml is not recognized by OC4J 10.1.3 as it was in 9.0.3. I can see lot of discussions about default-charset in this forum, could not find any answer t
-
Cannot drop cube or analytic workspace due to ORA-37409
The error is ORA-37409: cannot delete or truncate AW used by CUBE ORGANIZED table. This seems very closely related to the bug discussed in this thread: Drop cube organized table We need to drop and rebuild a cube due to a design change. It looks like
-
Hello, There is a way to know the ID of the data that you are inserting, because my program insert data about peoples in database( MySql ) and some fields are optional like photo, so if people fill the photo field the photo will be stored in photo ta
-
Hp Pavilion dv4 Notebook Hard Disk error
Everytime I attempt to boot up my laptop, I am greeted with: "Hard Disk Error, Please run the Hark Disk Test in System Diagnostics, Hard Disk 1 (3F1)" Upon running the Hard Disk test, Quick test returns "Hard Disk 1 Fault", and Full test returns Hard
-
Tried iOS4 but only tells me that iTunes is up to date
I have tried several times to update to iOS4, but all I get is a message that iTunes is up-to-date. I knew that. All I want is an updated phone. Any help or suggestions would be welcome.