Settings URL for WebDAV Access

Hi,
I am not able to create the cFolders Settings URL for WebDAV Access. I have created an external alias "cfolders_webdav" & as per the syntax for URL --->
<Protocol>://<Server>:<Port>/<External Alias settings>, I have created a URL "http://etdspd01.corp.clp.com.hk:8000/cfolders_webdav". However this is not working.
Can someone pl give any clue?
Thanking you in advance.
Regards
Deepak

Hi Jochen,
Thank you for your reply once again. I was doing exactly the same thing that you've mentioned (plugging the URL into my browser). Later I realized my folly & created the WebDAV URL into "My Netwrok Places". Nevertheless your reply helped me confirm that what I was going in the right direction.
I sub-question to the above topic. What role does WebDAV play in archiving of documents? How does it help in pushing the cFolders documents to a Document Management system?
I would appreciate your inputs on this as well.
Regards
Deepak

Similar Messages

WSDL Access URL for Metadata Access

Hi
Can someone suggest what is the WSDL Access URL in receiver Communication channel for Direct Point-Point connection scenario.
I can't find the details in SOAMANAGER service.
Thanks,
Murthy

Hi Murthy,
Have a look at this:
http://help.sap.com/saphelp_nwpi711/helpdata/en/84/eb5c292c184f97806a07272babc9bf/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50b63e8f-a4bb-2a10-e9b1-ba803fd06739?quicklink=index&overridelayout=true
Regards,
Naveen

Background Daemon URL for Virsa Access Enforcer 5.2

Hi,
I have Virsa Access Enforcer 5.2 installed on one of the JAVA stack system which not getting used. We are seeing following errors for every seconds in default trace. Does anybody knows where to enter this "'Background Daemon URL" so we can atlease stop these errors?
WARNING: Cannot get Application URL: null. PLEASE SET 'Background Daemon URL' IN CONFIGURATION TAB
java.lang.StringIndexOutOfBoundsException
#at java.lang.String.substring(String.java:1067)
#at com.virsa.cc.common.util.ConfigUtil.setDefaultJ2EEParam(ConfigUtil.java:214)
#at com.virsa.cc.common.util.ConfigUtil.getBgJobStartURL(ConfigUtil.java:201)
#at com.virsa.cc.xsys.bg.AnalysisDaemonThread.run(AnalysisDaemonThread.java:47)
#at java.lang.Thread.run(Thread.java:770)
Thanks

Martin,
I have already tried that note. But no luck.
Thanks

URL for Bex Broadcaster

Hi All,
I would like to know if there is any method to pass the value of the variable along with the following URL for directly accessing the broadcaster setting:
http:///sap/bw/BEx?sap-language=EN&bsplanguage=EN&cmd=start_broadcaster&SETTING_ID=<MY SETTING ID>
So that the user should not have to select the variable value in Preacalculate tab.
Thanks in advance
Ammu

Oh do u mean? all this to happen on the fly?
See Broadcaster is to send the report for the end user with some values. If he has to see the same report all the time with different data that is achieved this way. If not create as many settings as different customers and trigger that setting as and when required.
We also have a filter setting provided there in the next tab.
But we cannot pass a variable to the broadcaster. Because the URL just try to hit the appl server directly. and that url is autogenerated with all the parameters set.
Assign points if helpful.
Thanku.
Regards,
Kishore.

What's the correct form of the URL for wiki calendar access in iCal?

I understand the URL for my personal calendar "server.domain.net/webcal", but whats the URL for a wiki calendar? Under SL I used to access wiki calendars in iCal using a URL of the form "server.domain.net/principals/wikis/<wiki_name>" but this no longer works.

Nevermind I figured it out. The correct form is "server.domain.net/principals/__uids__/wiki-<name of wiki>/"

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My Apple password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

Hey Dpcupcake,
If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

Use Same URL for Internal and External Access for CRM 2015 IFD

I have setup a CRM2015 server for IFD access.
ADFS and CRM are on separate servers.
CRM server all roles
ADFS 2.0 server.
Using the internal URL I am able to access CRM without entering my details (as expected)
Using the external URL I am authenticated by ADFS as expected and can sign in.
We have an internal domain domain.local
We have an external domain domain.com (the certificate is for *.domain.com)
We have a DNS zone created internally for domain.com.
CRM URLs
internal : internalcrm.domain.com
External : externalcrm.domain.com
I would like all users to use the same link regardless of them being internal or external, but I would like so that any user who is on the domain is automatically logged in without entering their username and
password. What is the best way to do this?
I have tried creating a cname record on the internal domain.com zone pointing externalcrm.domain.com to internalcrm.domain.com but that didn't work, I still get the ADFS sign in page.
Thanks

So fair warning, what you're asking for isn't really a supported deployment method of CRM.
That said, you should be able to do some DNS trickery internal to your network that points your "crm.domain.com" to "crm.domain.local" and then hopefully CRM will treat the connection as if it came from an internal network.
Otherwise, you're likely going to have to accept that everyone gets the ADFS login page internal and external to your network.
The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

Http500 when trying to access URL for Oracle Application Server Console

We have a new install of R12.1.0 on Windows 2003 R2 (32bit). The Applications seem to work fine. Users can access the R12 applications and submit jobs.
We need to configure a new oc4j instance, so we are trying to access the Oracle Applications Server Console for the first time. After entering the URL below, we encounter an Http 500 error. The Application server console service is running.
http://wbf-soadb.bolthouse.int:18100/emd/console
Thanks

Mark,
The document (Note: 603716.1 - Using AS10g AS Control with eBusiness Suite Rel 12) used to be available for public access but seems not anymore. Please log a SR to get a copy of this doc as you need to follow the steps in this doc to access AS Control with R12.
Thanks,
Hussein

Trouble accessing Paper Source in page settings db for Epson printer

I am trying to print on an Epson 7600 using a sheet of paper, but the default settings are for roll paper. I see the setting in the page attributes of the print dialog box, but cannot find a way to change it. I've tried the page setup (where it is supposed to be), the printer setup (no option available at all), and have followed every button option of every window. It is the same for apple Mail program as CS2, so I think it is a printer db problem, not photoshop.
ps, my epson C84 works fine... it is the 7600 default settings that are not accessable-
HELP! and thanks for you help-

my problem is now solved. I got with Epson support. We had to remove the printer from the printers/scanners in the Preferences section of the iMac HD after unplugging the usb cable. Then, we went to the disc utility in Applications folder and performed a disc repair. After that we connected the printer, rebooted, opened PE12/LR4.4 and, voila, the paper source and media type now contained the appropriate info. Something was not right in my system, one of those mysteries.

Single URL for internal and external CRM access when using IFD

Hello,
At one of our client site I have setup IFD on CRM 2011. This IFD is behind TMG. My client is a big corporation therefore all CRM components including CRM, ADFS and SQL are on separate servers.
I have configured IFD using single url https://orgname.contoso.com Their IT staff wants to know why can't they use single URL for internal and external access where internal users are nto prompted for authentication
when logging on to the CRM server. I know you can do URL re-write in ADFS but they want to know the reason "why internal users can't use the same IFD URL and don't get prompted for their credentials". Text below is from their IT staff.

There are several approaches to your question. You need to set up both an internal and an external relying party trust. If you use the external URL, it will always direct you to the signin page, if you use the internal URL, it will resolve you single
sign on.
I've configured IFD for CRM multiple times, and this is how it works. CRM looks at the URL. If you use the external URL (org.domain.com), it will prompt for credentials. So what you are asking for, a single URL that works single sign on internally and prompts
externally really isn't possible.
What I recommend is:
1. make the external URL available internally
2. Configure all outlook clients against the external URL, that way you won't have to reconfigure when someone goes internal to external
3. Have users who are primarily internal use the internal URL for the web client, which will resolve single sign on
4. Have users who are primarily external use the external URL for the web client
For #1, since you only need to enter the credentials when you first configure CRM, it is in all effects single sign on.
One thing I haven't tried that may work is using IIS redirect internally to redirect the external URL to the internal URL. There is also a powershell script in the IFD guide that you can use to make the outlook client switch between the internal and external
URL's, but nothing that will give you a single URL that works as the internal relying party trust when internal and the external relying party trust when you are external.

Not able to access the URL for this web service (BPR)

1. Start SAP Solution Manager and call transaction SICF.
2. Right-click on default_host/sap/bc/solman, for example, and
select Enable service. When the service is enabled, additional
subgroups are visible.
Enabling reveals the URI of the Web service. In this case, it is
/sap/bc/solman/bpr. The protocol type is http. If you right-click
on bpr and select Display service i got the below error
<soap:Envelope soap:encodingStyle="http://schemas.xmlsoap.org/soap/encoding">
<soap:Header/>
u2212
<soap:Body>
u2212
<soap:Fault>
<soap:faultcode>Client</soap:faultcode>
<soap:faultstring>Missing SOAP envelope.</soap:faultstring>
</soap:Fault>
</soap:Body>
</soap:Envelop
Regards,
Neni

Hello Neni,
In most circumstances this error was caused by incorrect customizing, an external alias for the default host /sap/bc/solman/defaultuser had an incorrect target handler assigned to it.
Solution Manager's IMG and documentation (www.service.sap.com/solutionmanager) should detail the correct
value to use.
The correct values can be maintained in SICF.
On top of this, please review the following URL for external aliases documentation:
http://help.sap.com/saphelp_sm40/helpdata/en/78/9852bdc06b11d4ad310000e83539c3/frameset.htm
Thanks,
Mark

LAN side firewall settings for Direct Access (Windows Server 2012 R2) in DMZ?

I am currently planning to set up our first Direct Access server (Windows Server 2012 R2). I will be in our firewall DMZ and we will be using the IP-HTTPS listener.
For the Internet facing rule only TCP 443 inbound/outbound is sufficient but for the LAN facing rules (not talking about the Windows server firewall) what would be the recommended firewall rules for a Direct Access server? Is there a best practice guideline
to follow for this? Appreciate any advice or comments. Thank you.

Hi Barkley
Please see this Technet Link which will backup your requirements - https://technet.microsoft.com/en-gb/library/jj574101.aspx
Section Reads -
When using additional firewalls, apply the following internal network firewall exceptions for Remote Access traffic:
ISATAP—Protocol 41 inbound and outbound
TCP/UDP for all IPv4/IPv6 traffic
Also another link from http://www.ironnetworks.com/blog/directaccess-network-deployment-scenarios#.VO3tfvmsVrU
"I have had a number of conversations with security administrators and network architects who have expressed a desire to place the DirectAccess server between two firewalls (firewall sandwich) in order to explicitly control access from the DirectAccess
server to the internal corporate network. While at first this may sound like a sensible solution, it is often quite problematic and, in my opinion, does little to improve the overall security of the solution. Restricting network access from the DirectAccess
server to the internal LAN requires so many ports to be opened on the inside firewall that the benefit of having the firewall is greatly diminished. Placing the DirectAccess server’s internal network interface on the LAN unrestricted is the best configuration
in terms of supportability and provides the best user experience."
Kindest Regards
John Davies
Thank for your reply and information John. I find it somewhat disappointing that Microsoft does not provide much more in the way of documentation and information regarding this topic. I required more information to show to our security team so they will allow
us to have the internal facing NIC not have more restrictive rules in place as it is a security concern.

Using a variable to insert into a URL for redirecting clients

I got a good one, can anyone help on this?
Using RoboHelp Version 8.02.208.
My company uses MicroStrategy to deploy several web-based data analysis products.
Each of these data products (there are 5) are deployed on different servers.
I have set up a single source WebHelp project and use build tags for product specific help output.
(I also have to modify the Start Page, TOC and Default Topic settings prior to generating each product help)
Everything on this works fine and is not a problem.
We have just implemented an Excel add-in for one of the products.
That add-in uses a locally installed CHM file for its help.
In order to provide customized help that can be updated without forcing the clients to reinstall the CHM help file locally, the source for the CHM file has one dummy topic. In that topic, I have used HTML code to redirect the client to the WebHelp for the product and have integrated the Excel add-in help to that product’s customized help. The result is that the CHM file is opened locally in the HTML help viewer. Inside the HTML help viewer window, I open the WebHelp.
The redirect HARD CODES the URL with the product specific server name and Start Page help topic.
That works fine and is not a problem for ONE PRODUCT.
We are in the process of adding this Excel add-in to other products.
Now here is where I cannot get this to work with my implementation.
The URL for each product is different and to make matters worse, the Start Page is different for each product as well.
So, I am working on options for implementation of multiple products and here is my question:
(1)    The following is an example of the redirect in the single topic of the CHM file:
<meta http-equiv="refresh" content="0;URL=https://server.com/ProductName/WebHelp/StartPage.htm#mergedProjects/ExcelPlugIn/ Overview.htm" />
(2)    The red portion of the URL above will need to be modified to support each individual product with a custom server, product name and start page HTM file name.
Is there a way to:
(1)    Add a variable in this HTML code
(2)    Once the product is identified, update the variable with the product specific URL content
(3)    Integrate the variable into the target URL of the HTML code that does the redirect
I think this is either not possible or more work than needed. My other option is to provide standalone Excel add-in help on a server and just have the Excel plug-in go to that (right now it is integrated into the product specific help and the client has access to the plug-in help AND the application help all at the same place).
Thanks to all in advance for any help/suggestions.
Michael F Weart
[email protected]

Thanks for the feedback - here is more informtion on the challenges of this implementation:
I can only distribute one CHM file to cover all 5 web-based products that can be accessed through the Excel plug-in.
Regardless of which of our 5 products is used to install the plug-in on the client's local hard drive, the same installer is used.
That one CHM file is installed locally on the client's hard drive.
(The out of the box CHM file for the plug-in only has general plug-in help content the locl install causes problems for updating the content).
We needed to be able to easily update the help without inconveniencing the clients.
So, I am not creating 5 different CHM files for each installer, since there is only one installer regardless of how many of the 5 products they have.
The plug-in has a server setting and web service setting for each product and the client must choose which they are accessing when they fire up the plug-in.
They may be accessing the plug-in for any of our 5 web-based products they have subscriptions for.
Which means, the one CHM file must be able to:
(1) determine the product they are accessing
(2) direct to one of the 5 servers with the online help.
Each of the 5 online helps are deployed on separate servers with different URL links (and the helps have all different URL links as well).
These online webhelp outputs have some identical content but also some customized content for the specific product they are actually accessing.
My original approach was pretty much the same as William's above. Have a variable in the CHM help, determine the server they are accessing from the plug-in and insert the customized portion of the URL to access the appropriate webhelp.
Keep the ideas/suggestions coming.
I also have a development person looking into how to update a variable on the CHM side to populate the URL.
Michael F Weart
[email protected]

Problem with https internet url for Portal

Hello ,
We are running EP 7 SP 13.
We had a problem with the j2ee engine going down due to a db problem .It is ok now and and j2ee is up and running fine and the portal is accessible from the intranet.
But there is a problem with the https url that we use for internet access. It gives "page cannot be displayed error".
There is a IISproxy in place for internet access.Https certificate has not expired. Couldnt find much in the portal logs and trace or am I looking in the wrong place?
Any help would be most appreciated.
Rgds

Hi Vineeth
Check the IIS settings, , they might not have started properly.
EP5: Enabling SSL and renewing the J2EE certificate
SAP Note Number: 685306
Can you check the contents of Keystore in Visual admin,
Regards
Kaleem
Edited by: Kaleem on Aug 19, 2008 2:11 PM

Reg Unable to find URL for Adapter Engine Error

Hello,
During execution of a scenario, i am getting these errors in sxmb_moni:
AE_DETAILS_GET_ERROR
3: Unable to find URL for Adapter Engine af.xip.poecspxioo4
Error when reading the access data (URL, user, password) for the Adapter Engine.
Seems like it is a problem of XI Server unable to locate the Central adapter engine due to some parameter not set properly.
So, what are the points we can check while installation of XI so as to rectify this problem.

Hi all,
I got the similar error in my scenario and i solved the same.Actually i ma not pretty surte this will solve your problem.
In my case proxy generation settings was mis configured in the sender system. so its caused the reason.
I made an entry in the SPROXSET table and i did other activities like RFC and application system also.
Then its worked for me. Its not matching with your case please do ignore this one
Regards
Vijay

Settings URL for WebDAV Access

Similar Messages

Maybe you are looking for