Settings wont save in bios? (z68 gd80 (g3))

Sorry if this is in the wrong place,
whenever i overclock something in bios, i will go into windows and it wont have taken effect, for instance i am trying to overclock my i7 2600k but every time i change the multiplier in bios it doesn't take effect...

Update to UEFI/BIOS .I62 found here; https://forum-en.msi.com/index.php?topic=151130.0

Similar Messages

Amd proprietary drivers settings wont save

I'm trying to set up a multi monitor setup
The bastard did save my antialiasing setting (On unless application specifies, default is off unless application specifies)
But its not saving my multi-display settings, if i try to run the administrative catalyst control center console as the shortcut does
amdxdg-su -c amdcccle
amdxdg-su: no graphical method available for invoking 'amdcccle' as 'root'
what can i do?
also just running amdcccle as root (after doing su) wont work, if you thought of that.
Last edited by rabcor (2013-02-26 02:01:42)

Found somewhat of a workaround, not perfect but it partially works.
if i run amdcccle as su and change the multi-display settings, then go into my window manager's display settings and save them (to make xrandr save settings) it'll work
But after doing it a few times my driveres broke and eventually messing with the options in xorg.conf led to kernel panics and whatnot (how can a X11 config file lead to kernel panics upon reboot/shutdown when X isn't even running ?!).
Which i fixed with this workaround.
aticonfig -f --initial --adapter=all
aticonfig --px-igpu
aticonfig --xinerama=on
which pretty much made my dual screen display work, with the exception that i can't have my secondary monitor on the left side either because i'm so noob or because xfce wont allow it... or because X simply likes to align everything to the screen on the left. not sure.
Seeing as my second screen is a CRT tv... i can't really live with having my panel and desktop shortcuts on it
Edit: Later on i realized its a better idea to just use xrandr instead of xinerama.
Last edited by rabcor (2013-02-27 21:24:50)

Flash website settings wont save

Hi im looking for some help, I'm changing my flash player settings to prevent glitching on a game i run, and each time i set the website settings to 10 mb it goes back to none when i check on the other ones like global and local it does fine. I mean i think they reset themselves once from maybe me deleting cache or history or something i dont know but it usually works please help

NO ONE WILL REPLY WTF ADOBE!

Settings wont save

Data:
WIN XP Pro 32bit
Firefox 3.6.10, IE 8.0.6001
Flash Player 10.1.85.3
Avira AntiVir, Spybot -Search and Destroy
i could not find anything similar so i start this here
please redirect me and delete this one if im wrong
ok so this is what happend
i started playing a game but it was said to set the storage to unlimited which i did
once i closed the browser the flash player settings reset (themselves?) ... all of them besides global BUT global didnt even seem to work
it seemed like the individual setting for all tabs are reseting every time back to global
but even if i set global to unlimited it still does not work
i tried it with both browsers
i talked with other people and the developer of the game but i seem the only one with this problem so its probably not a bug or something
now im hell off confused cause i cant tell where the problem is
Greetz
Ecnelis

Hi Ecnelis,
Go to the below location on your machine.
C:\Documents and Settings\<YourUserName>\Application Data\Macromedia\Flash Player\macromedia.com\support\flashplayer\sys
You will find some folders and a file named settings.sol
Try to create a new dummy file in the above directory e.g. test.txt or test.sol
Can you successfully do that?
If yes, delete the settings.sol file from there and try the FP Settings Manager again. Can you now make the changes?
If still not, please provide the settings.sol file that is in that directory (It will be recreated once you access settings manager again in browser and close).
Cheers
--Vikas

Settings Wont Save on E1000, Help me?

Im trying to get an open NAT so im at the Port Range Forwarding and i type in all the info and enable it and i click save. It says the save was sucessful but when i look at it again, it reverted back to default so its completely empty. i did the same with the Single Port Forwarding and it did the same thing. any help?
My router is Linksys E1000
So no matter how much times i type it in and save, it gets cleared so i cant open my NAT

Try upgrading your router. Go to this link to do the upgrade.
Once you have finished upgrading the firmware, try opening the port again. This link will help you with it.
Hope this helps!

Settings changed wont save after reboot

Any changes that i do in my Mac, wont save after reboot.
If i change the settings on my mouse (unchecking Scroll direction) next time i reboot, it will be checked again.
Any changes that i do to my Finder sidebar (like adding My Main Drive not visible, add downloads and pictures, change the foler view as columns) they are all gone after i reboot. Its getting freakin anoying. I Google for a solution but to find none.
When trying to opening Calender, it says that i dont have permission. I have gone to the application and checked and made sure that all acounts have r/w permissions.
On the Dock, i uninstalled an app and next reboot i will get a question mark, even tho i removed it before it comes back after the reboot.
Thanks for listening.
Burn1nator

May sound silly, but are you sure you're not logging in as the 'Guest' user? What privileges does the user account you're using have? Check in
 > System Preferences... Users & Groups
that the account you're using is Admin. If you're using a Standard account, are parental controls enabled?
If you are admin, try resetting your permissions and removing the sys pref property file. Before you do that, backup your system and user data. Once you're backed up, open Terminal and copy/paste the following into the Terminal window:
rm ~/Library/Preferences/com.apple.systempreferences.plist
hit 'return'. If the prompt returns without an error (as it should), paste this
sudo chown -R `id -un` ~
hit 'return'. Enter your password as requested, but type carefully as it will be invisible while you do.
This will take a while, but after the command finishes (i.e., when the prompt returns), restart the mac.
After the restart, set the mac up the way you want, then test whether the problem is fixed by restarting again to see if your changes were kept.

Firefox wont save settings

Orange screen keeps popping up saying you have updated to new fire fox .Fire fox wont save settings I put a check in turn off pop up blockers and when I close it goes away

None of those articles helped.When I open the pref.js file I cant delete it like it says.It puts it in a tray in the bottom and wont let me delete it while it is in that tray.When i open that file there is a red x associated with it.I think this file is the problem but nothing I try seems to work.Any help would be appriciated

Witch version of click Bios come with the Z68-GD80 (b3)

As the title said, with version of click bios come with the board, I know they have the click bios 2 with the (g3) but i can't find one in stock anywhere

Quote
As the title said, with version of click bios come with the board
Definately no Click BIOS II on the Z68-GD80 (B3).
Quote
Quote
I know they have the click bios 2 with the (g3) but i can't find one in stock anywhere
That is because the G3-boards have not really hit the market yet.

Z68-GD80 (G3) Bios/Boot issue

I have a major problem right now with my z68-GD80. I went and tried to update the bios to get it all ready for a new 3770K I have (was at I.80, going to J.10) and it got as far as trying to reboot the system after it apparently updated the bios from within windows. However, it only got as far as giving me a double short beep and then sat there for 30 minutes before I shut down the system. I fire it back up, does double beep again, but this time its cycling itself every 30 seconds or so.
I then go and clear the cmos to see if that will help get this thing into some sort of working state. All that does is cause it to try to cycle between the bios's, but according to the led on the mobo, its only trying to boot from the first one.
So, any idea how to get this thing back on its feet, or am I SOL?
As of this minute Specs:
CPU: 2500k (all stock)
Mem: 1x8GB Kingston Hyper-x KHX1600C10D3B1k2/16G
No ODD's (Two Blu-rays pulled)
No HDD's (256GB M4 pulled)
GPU: Reference 5870 (stock)
PSU: PCPC 750W
OS: Win8 Pro x64

Don't update bios from windows, it very often ends badly.
At anyrate, try a full cmos clear >>Clear CMOS Guide<<
If you are unable to get it to post or recover, you will need an spi programmer from either msi or a decent computer shop.
Also, it MAY boot with your IVY cpu so that is worth a shot.
As a final note, if you need to send it for RMA as for the beta bios, as it has been reported to really rock.
z68a-gd80 (G3) I had to assume by what bios you used.

Ram problem! (msi z68-gd80,g3)

Hey there.
have a problem with my new ripjaw x series ram 1866. ( and all other ram)
Tried installing all 16 gb of it earlier today and apparently only the first blue and black ram slot work.
Before i updated my bios to the newest one the pc wouldn't even load it would automaticly restart, but after getting the newest version of bios the computer keeps running but no signal to the screen.
I tried mem test on all 4 sticks by using them on the first two slots 1 black and 1 blue and there are no errors.
UPDATE:
CPU brand, model and speed - i7 2600k
Motherboard model (full marketing name, not just MS-xxxx) - > msi z68-gd80,g3/ v18.8
Memory brand, type/speed, size, number of sticks 4 sticks /4gb each / Ripjaws X F3-14900CL9Q-16GBXL
Video card brand, chipset type, memory size Ati Radeon HD 5870
Hard drive(s) brand, size, type, speed Hitachi 320 gb and Seegate Barracude 1tb 7200RPM
Any other peripheral cards and devices NO
Operating system and version (including if 32 or 64bit!) Windows 7 Ultimate 64 bit
Power Supply Unit brand and output in watts and DC output (amps) -Seasonic SS750HT active PFC F3

Quote from: Jack on 26-January-12, 00:26:49
Did you test @DDR3-1333 // 1.55V // CR=2T?
Also, please read the >>Posting Guide<< and provide full system specs (especially precise model names/numbers of the memory modules you are talking about here).
How and where do i change those settings? Am a total newbie so you'll have to be patient with me..
In the overclock setting of the bios tried changing the volt to and freq to what you said but after changing that even the working 2 didn't work.. so i had to reset bios.

Image wont save as it looks in photoshop.

I'm a pretty amateur user of photoshop, but I've been having this problem with an image I'm working on; it wont save as it looks in photoshop.
Basically, this is what I'm looking at when the psd file is open in Photoshop:
This is how I would like the image to look when I save it. However, when I save it as a JPEG (or any other format for that matter) it looks like this:
The saved image is a JPEG file with a resolution of 500x500, the image I'm working with in photoshop has an image size of 7000x7000. Also, the image seems to produce different results when saved at different resolutions. It's very confusing.
Here is my layers also:
I am also using a Halftone filter set to subtract on this image, giving the image the lines across the image (shown here as layer 1).
Anyone have any idea why this is happening and/or what I'm doing wrong?

There's no reason an image should be downsampled upon saving (from 7000 to 500 pixels), unless you specifically tell it to using the Image Size dialog. The only exception I can think of is if you use Save For Web, which has a number of default settings you should keep an eye on. But a 7000 pixel image has no business on the web anyway (that's w a y too big).
Resampling will obviously affect an image like this (with the line screen) in a number of ways. You should only work on this at the final intended pixel size.

Cisco Access Point Air-Lap1242: It wont save config

Hi
I have 2 Air-Lap1242 that wont save their config after reboot.
They are managed by a WLC (4404) and it all seems pretty fine and dandy, but when i reboot them, they dont want to save anything.
I am setting them up as bridges (mesh), and it works until i reboot them, then I have to do it all over again.
Using CLI to type in "write mem" or "copy running-config startup-config" only results in:
"Building configuration... [OK] ->
NVRAM Verification Failed "
Anyone who has any sort of solutions to this? Ive tried to google hard on the subject, but didnt get any wiser.

When the AP joins the controller, I set up the settings for its intended use, in this example a bridge. (one ap as root, one as mesh).
After everything is filled out, i reload the ap's and all is good. Then i fill in the "mesh"-folder that appears after reload and reload the Ap and once again all is saved on the Ap. If I disconnect the power to them, both Ap's return to factory default.

20.1 and Z68 gd80 b3.

So the 20.1 and Z68 gd80 b3. Is that bios only for Ivy bridge ?

Added: Additional information to Reply #5. It was rumored that PCI-E 3.0 was able to be enabled on this specific board when an Ivy CPU was used, I remain skeptical of this as the PCI-E slots are not hardware compliant as they don't have the needed contact fingers. Is it possible a workaround was found to this hardware limitation? Don't know since I no longer have a B3 to test this one way or the other.
This is also one of the rarer mainboards that can be safely crossflashed. If not intending to install an Ivy CPU, it is still recommemded to not flash an Ivy UEFI/BIOS. Flash is not without risk, so think twice before attempting it.
>> Z68A-GD80(G3) Ivy Beta <<
Please read this review before making a decision to try this.
>> Ivy Beta Review <<

Photoshop wont save actions, I create,

my hard drive was just replaced and the data and applications were all transferred over, now photoshop wont save new actions or presets I create, it says I dont have permission. Not sure what to do, I dont really want to have to reinstall everything if there is a quick fix.

okay so thanks to everyone for your help between this information and some other I found online I got it sorted, my library folder wasnt showing up, I have just also recently upgraded to maverick os, so the library folder show up you need to unhide it, this was a great source telling me how to do that http://www.macworld.com/article/2057221/how-to-view-the-library-folder-in-mavericks.html
then I just went into the user/library/adobe cs5 settings/ and changed the preferences so I was the owner of that folder.

MSI Z68-GD80 (G3) Big Problems

So I have gotten my MSI Z68-GD80 (G3) Motherboard 1050 Watt powersupply from corsair 16GB of ram Corsair Vengence GTX 580 Twin Frozr II 2600K and a H80. At Stock Speeds My computer just frezzes in till i reset my computer or it automatically restarts and i have been losing Work Info because of this problem. In Prime 95 i ran it for a hour no Errors or anything. When i Enable OC genie Prime 95 Crashed in 30 minutes my computer freezes loud noise comes out of my headphones. Then i try pressing reset button no respond so i had to turn of my powersupply. btw my highest temp on the core was 55C. This usally happenes when i play games like: MW2,WAW,Crossfire,CSS,TF2,and so On. Btw im on the latest UEFI and drivers i believe since i used the LiveUpdate.
If i have to RMA this Board can I drop it off at MSI Viking Road Richmond I Live Near there.

Have you tried it without OC Genie ? What are the results ? Which BIOS are you using ?
Only insert one memory module. Do a CMOS clear >>Clear CMOS Guide<< Remove the battery for a while.
Ensure that EuP2013, Spread Spectrum and XMP are disabled.
Retest with only one memory module.

Settings wont save in bios? (z68 gd80 (g3))

Similar Messages

Maybe you are looking for