Settings Wont Save on E1000, Help me?

Im trying to get an open NAT so im at the Port Range Forwarding and i type in all the info and enable it and i click save. It says the save was sucessful but when i look at it again, it reverted back to default so its completely empty. i did the same with the Single Port Forwarding and it did the same thing. any help?
My router is Linksys E1000
So no matter how much times i type it in and save, it gets cleared so i cant  open my NAT

Try upgrading your router. Go to this link  to do the upgrade.
Once you have finished upgrading the firmware, try opening the port again. This link will help you with it.
Hope this helps!

Similar Messages

  • Illustrator CS4 wont save files, please help?

    You can edit a file, go to save, close it down, then when you re-open it the changes made have not been saved?? No error message or warning pops up, and it all looks ok like it has saved properly, until you open it up again. This also happens when you use 'save as' command if you use the original file name. If however you type in a different file name - it saves ok. But obviously that is not great as you cant now trust or rely on the save mechanism of the programme, to make sure any changes to artwork have been stored!! I have never seen an issue like this, it is worrying, I hope somebody can help?
    Thanks.
    We are running CS4 on windows7 - yes PC!!!

    We save in EPS, and its not just one file, its a variety of different files and it seems to be random as to which files it does it on, some work fine - some don't. And it can be anything from a minor text change to a colour change, it doesnt seem to matter on the change made, it reacts the same.
    The files are saved over a network connection to a large external hard drive.
    Its really puzzling and now starting to cause problems as we do a fair bit of work in it, and can't trust one of the most important features, and that any changes that have been done have been saved and stored!
    Hope maybe you can help with any thoughts at all.
    Cheers.
    Date: Thu, 24 Jun 2010 03:41:40 -0600
    From: [email protected]
    To: [email protected]
    Subject: Illustrator CS4 wont save files, please help?
    What file format do you save it in?
    What kinds of changes did you make in that file?
    Where do you save the file (removable or network media)?
    >

  • Amd proprietary drivers settings wont save

    I'm trying to set up a multi monitor setup
    The bastard did save my antialiasing setting (On unless application specifies, default is off unless application specifies)
    But its not saving my multi-display settings, if i try to run the administrative catalyst control center console as the shortcut does
    amdxdg-su -c amdcccle
    amdxdg-su: no graphical method available for invoking 'amdcccle' as 'root'
    what can i do?
    also just running amdcccle as root (after doing su) wont work, if you thought of that.
    Last edited by rabcor (2013-02-26 02:01:42)

    Found somewhat of a workaround, not perfect but it partially works.
    if i run amdcccle as su and change the multi-display settings, then go into my window manager's display settings and save them (to make xrandr save settings) it'll work
    But after doing it a few times my driveres broke and eventually messing with the options in xorg.conf led to kernel panics and whatnot (how can a X11 config file lead to kernel panics upon reboot/shutdown when X isn't even running ?!).
    Which i fixed with this workaround.
    aticonfig -f --initial --adapter=all
    aticonfig --px-igpu
    aticonfig --xinerama=on
    which pretty much made my dual screen display work, with the exception that i can't have my secondary monitor on the left side either because i'm so noob or because xfce wont allow it... or because X simply likes to align everything to the screen on the left. not sure.
    Seeing as my second screen is a CRT tv... i can't really live with having my panel and desktop shortcuts on it
    Edit: Later on i realized its a better idea to just use xrandr instead of xinerama.
    Last edited by rabcor (2013-02-27 21:24:50)

  • Flash website settings wont save

    Hi im looking for some help, I'm changing my flash player settings to prevent glitching on a game i run, and each time i set the website settings to 10 mb it goes back to none when i check on the other ones like global and local it does fine. I mean i think they reset themselves once from maybe me deleting cache or history or something i dont know but it usually works please help

    NO ONE WILL REPLY WTF ADOBE!

  • Settings wont save

    Data:
    WIN XP Pro 32bit
    Firefox 3.6.10, IE 8.0.6001
    Flash Player 10.1.85.3
    Avira AntiVir, Spybot -Search and Destroy
    i could not find anything similar so i start this here
    please redirect me and delete this one if im wrong
    ok so this is what happend
    i started playing a game but it was said to set the storage to unlimited which i did
    once i closed the browser the flash player settings reset (themselves?) ... all of them besides global BUT global didnt even seem to work
    it seemed like the individual setting for all tabs are reseting every time back to global
    but even if i set global to unlimited it still does not work
    i tried it with both browsers
    i talked with other people and the developer of the game but i seem the only one with this problem so its probably not a bug or something
    now im hell off confused cause i cant tell where the problem is
    Greetz
    Ecnelis

    Hi Ecnelis,
    Go to the below location on your machine.
    C:\Documents and Settings\<YourUserName>\Application Data\Macromedia\Flash Player\macromedia.com\support\flashplayer\sys
    You will find some folders and a file named settings.sol
    Try to create a new dummy file in the above directory e.g. test.txt or test.sol
    Can you successfully do that?
    If yes, delete the settings.sol file from there and try the FP Settings Manager again. Can you now make the changes?
    If still not, please provide the settings.sol file that is in that directory (It will be recreated once you access settings manager again in browser and close).
    Cheers
    --Vikas

  • Settings wont save in bios? (z68 gd80 (g3))

    Sorry if this is in the wrong place,
     whenever i overclock something in bios, i will go into windows and it wont have taken effect, for instance i am trying to overclock my i7 2600k but every time i change the multiplier in bios it doesn't take effect...

    Update to UEFI/BIOS .I62 found here; https://forum-en.msi.com/index.php?topic=151130.0 

  • Firefox wont save settings

    Orange screen keeps popping up saying you have updated to new fire fox .Fire fox wont save settings I put a check in turn off pop up blockers and when I close it goes away

    None of those articles helped.When I open the pref.js file I cant delete it like it says.It puts it in a tray in the bottom and wont let me delete it while it is in that tray.When i open that file there is a red x associated with it.I think this file is the problem but nothing I try seems to work.Any help would be appriciated

  • When we try to buy a new app or update our existing apps, my account settings wont allow me to enter ANY of my credit cards.  It says to contact apple/itunes/support, but when I do, I don't understand how to navigate it to find an answer.  Help!

    when we try to buy a new app or update our existing apps, my account settings wont allow me to enter ANY of my credit cards.  It says to contact apple/itunes/support, but when I do, I don't understand how to navigate it to find an answer.  Help!

    Click here and ask the iTunes Store staff for assistance.
    (108048)

  • Help!!! Flash CS3 and CS4 wont save .gifs

    Ok, so im trying to save my project as a .gif and it just wont save it right, it marks as if it has already been saved, but when i open the .gif it just displays the first frame.......any help? Am i doing something wrong???? the actual file that im saving is a small animation, with 1 sec of animation, 10 frames, and its appx. 100 x 100 pixels I thought it was the size, but it was not. Any help plz?????
    Note, it does saves it right in .swf  but not on .gif

    Those links, did helped me, but that didnt correct the problems that i was getting.
    Here is the thing, at least this is how it worked for me.
    I was editing the original picture on fireworks, and saw that instead of layers, it was creating bitmap images, saved it as fireworks pdn and imported to flash, and when i finish it didnt save the gif.
    I instead opened the original on photoshop, and it created layers instead bitmap, saved it as a photoshop image, opened it on flash, worked on it, and well, guess what??? it did saved it as a gif!!!!!
    So wierd, but, why won't it save it from the fireworks one into a gif, and the photoshop one worked good? 
    It didnt helped me alot mate, but i still thank you for reading this post bro, thanks, and have a nice day ^_^

  • Settings changed wont save after reboot

    Any changes that i do in my Mac, wont save after reboot.
    If i change the settings on my mouse (unchecking Scroll direction) next time i reboot, it will be checked again.
    Any changes that i do to my Finder sidebar (like adding My Main Drive not visible, add downloads and pictures, change the foler view as columns) they are all gone after i reboot. Its getting freakin anoying. I Google for a solution but to find none.
    When trying to opening Calender, it says that i dont have permission. I have gone to the application and checked and made sure that all acounts have r/w permissions.
    On the Dock, i uninstalled an app and next reboot i will get a question mark, even tho i removed it before it comes back after the reboot.
    Thanks for listening.
    Burn1nator

    May sound silly, but are you sure you're not logging in as the 'Guest' user? What privileges does the user account you're using have? Check in
     > System Preferences... Users & Groups
    that the account you're using is Admin. If you're using a Standard account, are parental controls enabled?
    If you are admin, try resetting your permissions and removing the sys pref property file. Before you do that, backup your system and user data. Once you're backed up, open Terminal and copy/paste the following into the Terminal window:
    rm ~/Library/Preferences/com.apple.systempreferences.plist
    hit 'return'. If the prompt returns without an error (as it should), paste this
    sudo chown -R `id -un` ~
    hit 'return'. Enter your password as requested, but type carefully as it will be invisible while you do.
    This will take a while, but after the command finishes (i.e., when the prompt returns), restart the mac.
    After the restart, set the mac up the way you want, then test whether the problem is fixed by restarting again to see if your changes were kept.

  • Photoshop wont save actions, I create,

    my hard drive was just replaced and the data and applications were all transferred over, now photoshop wont save new actions or presets I create, it says I dont have permission. Not sure what to do, I dont really want to have to reinstall everything if there is a quick fix.

    okay so thanks to everyone for your help between this information and some other I found online I got it sorted, my library folder wasnt showing up, I have just also recently upgraded to maverick os, so the library folder show up you need to unhide it, this was a great source telling me how to do that http://www.macworld.com/article/2057221/how-to-view-the-library-folder-in-mavericks.html
    then I just went into the user/library/adobe cs5 settings/ and changed the preferences so I was the owner of that folder.

  • Get error message when exiting premier Pro wont save file

    I am getting an error message when I exit adobe premier pro it wont save the file and the program locks up. I even uninstalled an reloaded the program CS5.5 vrs. still get the same error can anyone help?

    You have not provided any system information or other technical details, so we can't know anything. Either way, ask in the Premiere Pro forum.
    Mylenium

  • Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

    hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
    iv unistalled flash, iv checked plug ins it just wont work,

    It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
    (If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
    * Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
    After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
    When you have installed the latest version of Flash, relaunch Safari and test.
    If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
    click Check Now. Quit and relaunch your browser.
    You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
    Use the FULL installer for 12.0.0.44:  Flash Player 12 (Mac OS X)
    And the instructons are here: Snow Leopard Clean Install.pdf
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
    Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

  • Image wont save as it looks in photoshop.

    I'm a pretty amateur user of photoshop, but I've been having this problem with an image I'm working on; it wont save as it looks in photoshop.
    Basically, this is what I'm looking at when the psd file is open in Photoshop:
    This is how I would like the image to look when I save it. However, when I save it as a JPEG (or any other format for that matter) it looks like this:
    The saved image is a JPEG file with a resolution of 500x500, the image I'm working with in photoshop has an image size of 7000x7000. Also, the image seems to produce different results when saved at different resolutions. It's very confusing.
    Here is my layers also:
    I am also using a Halftone filter set to subtract on this image, giving the image the lines across the image (shown here as layer 1).
    Anyone have any idea why this is happening and/or what I'm doing wrong?

    There's no reason an image should be downsampled upon saving (from 7000 to 500 pixels), unless you specifically tell it to using the Image Size dialog. The only exception I can think of is if you use Save For Web, which has a number of default settings you should keep an eye on. But a 7000 pixel image has no business on the web anyway (that's w a y too big).
    Resampling will obviously affect an image like this (with the line screen) in a number of ways. You should only work on this at the final intended pixel size.

  • My Safari settings wont reflect search engine default settings?

    Hi,
    A 'Search Nation' toolbar got downloaded on my Macbook by some mistake, and now it has become my default browser search engine. Even after changing the Preferences for Safari, it wont change back to google. I have removed all 'Search Nation' software, but there is no way to uninstall it. My Search default settings wont go back to normal . please help.

    Try my suggestion here >  How do I uninstall the Nation search tool bar?

Maybe you are looking for