Settingup Exchange server available through proxy - How?

Within my emailclient (not on iPhone) I am able to give the exchangeserver's name AND the proxy server that I should use connecting to it.
Exchangeservername: exchange.mycompany.com
Proxyname: https://proxy.mycompany.com
(connect to SSL - only connect when .... *.mycompany.com)
Where can I find these settings on my iPhone?
Greets
Robert

The iPhone connects to the Exchange server only via IMAP with SSL - you cannot designate a proxy server when setting up an Exchange account on the iPhone.

Similar Messages

Securely Access Exchange Server 2007 through ASA 5510 using Outlook

Is there any way to access a MS Exchange Server 2007 on Windows server 2008 through an ASA 5510 running 8.4 with a full MS Outlook client (not using OWA - web browser)? OWA is currently working fine but I was wondering if access via the full Outlook client is possible and more importantly...is it opening up too many ports on my 5510? Any help is much appreciated!
~John

Hi John,
For that scenario, a remote access VPN is probably the best way to go (either the traditional IPSec client or SSL VPN/AnyConnect). This config guide lists your options on the ASA:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/vpn_ike.html
-Mike

Howto? SSO server calls through proxy (not reverse)

I developed an authentication plugin for Oracle SSO Server (10g 9.0.0.4). This plugin initiates HTTP requests to an external authentication server somewhere on the internet. How do I configure the SSO server (or apache or OC4J, at least somewhere) that the HTTP request my plugin initiates, is routed through a proxy server (that is a traditional old fashioned proxy server)? I don't want to include it in the code by the way...
I can't find it in the docs nor does metalink have any record of such a thing.

Let's me summarize my request.
I am managing the frontier of my customer. I have a web server farm based on Reverse Proxy and Proxy. The Reverse Proxy side is well consolidated and it is based on an Oracle iPlanet Web Server 7 web farm. The Proxy side is actually based on Squid. There are a Production and a Staging environments, about 30 web configurations with 90 web instances and 20 Squid instances.
I am looking for interesting ideas to convince the customer and replace Squid with Oracle. Infact let's consider that any replacement has a cost so the additional value is mandatory!
If I have understood correctly it is not a good idea to use Oracle iPlanet Web Server 7 acting as Proxy, right ?
Ok, let's assume iPlanet Web Proxy Admin Server and iPlanet Admin Server coexist in the same machine, does iPlanet Web Proxy Admin GUI support SSO with iPlanet Web Server GUI ?
It could be additional value, I mean...

Connect to Server HTTPs through Proxy Server Problem

I am trying to connect through a company proxy via port 8080 to a https connection on a server so that it can mount on a desktop. Using 10.4.11 on Mac Pro
The connection works http through the company network and works http and https through my home network. The company require we use secure connections or something they will supply which will be out of date and clunky to use. I am using FullSwitch as a workflow so need the volume to mount.
Basically I do the following:
Go
Connect to Server
type address https://??????????????????/???????
I then get a Proxy Auth where I put my domain, user name and password
A certificate is then returned and I press continue
It then attempts to pass through the proxy tunnel to connect but just keeps going and going......
It should come up at this point with the server login but it doesn't
We are told by the IT team which only supports PCs that it is then that the Mac tries to create 2000+ connections but doesn't just creates lots of network traffic.
In between us and the proxy we sit behind a firewall but are told that there are no rules to stop https etc. I can connect to the site through Safari via https but as I need to upload files I need to be able to mount via https as a volume
Are there any suggestions as to what the issue may be or questions that I can try and ask IT to gather more info?
Many thanks

Many thanks for your reply. We can use ftp but can not tunnel sftp through the proxy.
As I use fullswitch for automation I would like to keep the simplicity of mounting the server as files can be uploaded easily. Currently using http no problems but am being forced to use https from IT Security and of course being in a large corporation with only 35 Macs they say they don't support Macs and hey you have to do it our way or else. Driving me mad.
Sorry for going off on one but it is so frustrating as the supplier we are sending to wants the files the way we currently send them as they have their system workflow but my company wants us to use their sftp system that is clunky for in and out going file connections forcing suppliers to go to our sftp servers and not us supplying to them.....................
Right then I currently use Transmit with Type 7 on the proxy type for FTPing files using FTP Protocol not SFTP and have no problems going to the sites we have asked to get specific access to (again takes 2-14 days to get all the firewall rules changed to allow access to new ftp sites we are given, very efficient working practice)
So as you can see I really want to get the https working as it is the best option for workflow if IT security want us to secure.
Many thanks, again sorry for my ranting

Is the Exchange server available in other languages?

Hello,
I need to know if Exchange can be localized on a server. I need to know if an email account will always have "Inbox" as a folder no matters the language used.
Thanks
ArchieCoder

Hi ArchieCoder,
In addition to the above suggestion, I would like to clarify that the language of the default folder names wouldn't be changed unless the LocalizeDefaultFolderName parameter is set to $true.
The value is set to $false by default. This parameter can only be used by the mailbox owner running the task. If a non-mailbox owner tries to configure this setting on the mailbox, an error will be reported.
For more information, here is a thread for your reference.
Set-MailboxRegionalConfiguration
http://technet.microsoft.com/en-us/library/dd351103(v=exchg.150).aspx
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

How can i find information about all exchange server in the organization?

I have four exchange server server in my organization, i wants to find all the details like mailboxes, information stores, storage groups, distribution groups etc. , using powershell commands from any one of the exchange server.
for example:- I am using exchange management shell of exchange server named server1 and i wants to find above mentioned details of exchange server named server2. How can i do this?
Is there any type of cmdlets exist for this purpose if yes , please mention how can i do this?
Thanks

Hi,
Based on my experience, in Exchange 2003 server, there is only ESM as the management tool and no Exchange Management shell. Thus, to get all mailboxes in Exchange 2003 servers, you can refer to the following similar thread:
http://social.technet.microsoft.com/Forums/exchange/en-US/81aaea71-1c7c-4cea-92f2-5da9b6240534/how-to-export-a-list-of-user-mailboxes-in-active-directory-exchange-2003-server?forum=exchangesvradminlegacy
get-qaduser "*" -includeallproperties | select name, proxyaddresses
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

I need to buy Microsoft Exchange Server 2013 License.

I need to buy exchange 2013 license but problem is that I have total 175 users in my organization and then exchange standard license support upto 5 mailboxes and exchange enterprise support upto 100 mailboxes. My boss want to have each user have separate
mailbox..
So i am looking a solution for 175 users with 175 mailboxes. If anyone can help me and guide me which exchange server is best and how can i manage 175 separate mailboxes ????
note: in future i also want to have symantec exec backup solution (mailboxes archiving) for that exchange server which i deploy in my organization.
need fastest response.
thanks in advance

Hi FAISAL,
Regardless of which version of the Exchange 2013 will not limit the number of mailboxes, however，different versions of the
restrictions embodied in the number of databases.
More details please refer to the following article:
Exchange 2013: editions and versions
Microsoft Exchange Server 2013 is available in two server editions: Standard Edition and Enterprise Edition. Enterprise Edition can scale to 50 mounted databases per server in the Release to Manufacturing (RTM) and Cumulative Update 1 (CU1) versions, and
100 mounted databases per server in Cumulative Update 2 (CU2) and later versions; Standard Edition is limited to 5 mounted databases per server.
Best regards,
Niko Cheng
TechNet Community Support

Exchange Server Failed

My organization's exchange server failed a couple of weeks ago. The symptoms were that the users were being prompted for password to access their outlook account and certificates errors. Also found that we were unable to access the EAC and powershell was
also not connecting to the exchange!! Since we have two domain controllers we have tried to install exchange on the other DC but this did not work as expected as still could not access the EAC. Now we are in the process of uninstalling exchange on both servers
to start form scratch, however on the first server would not complete the uninstallation as previously the ADSI edit was used to remove all components of exchange. That means that it still has the main services and components installed but does not see itself
as an exchange server.
Any ideas how to go around completely removing exchange from that server, as its not doing it in the usual uninstall programs manner.
OS- Windows Server 2012 R2
Exchange Server 2013
Note that I am not that IT savvy!!!

My organization's exchange server failed a couple of weeks ago. The symptoms were that the users were being prompted for password to access their outlook account and certificates errors. Also found that we were unable to access the EAC and powershell was
also not connecting to the exchange!! Since we have two domain controllers we have tried to install exchange on the other DC but this did not work as expected as still could not access the EAC. Now we are in the process of uninstalling exchange on both servers
to start form scratch, however on the first server would not complete the uninstallation as previously the ADSI edit was used to remove all components of exchange. That means that it still has the main services and components installed but does not see itself
as an exchange server.
Any ideas how to go around completely removing exchange from that server, as its not doing it in the usual uninstall programs manner.
OS- Windows Server 2012 R2
Exchange Server 2013
Note that I am not that IT savvy!!!
I would recommend you call Microsoft Support. The only supported method to remove Exchange is through Add/Remove programs.
Also, installing Exchange on a DC is not recommended.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Email Event Generator to read out-box on Exchange server

I know Email Event Generator could read in-box, can it also read out-box on Exchange server? if yes, how could i configure to read outbox?

The iPhone and iPad are unable to read RMS (restricted email) because iOS is not RMS enabled. GigaTrust has an application (http://www.gigatrust.com/ios-devices.shtml) for the iPhone and iPad that will allow RMS protected emails to be viewed and created. The GigaTrust App is available for a free download from the iTunes App Store but there are server side components that must be provided by GigaTrust and require a connection license.

Problem e-mailing reports after migrating to new Microsoft Exchange server

Hi,
I am now unable to e-mail (SMTP) reports to anyone in my company because we just migrated to a new Microsoft Exchange server. Anyone know how to get rid of this message?
Status: Failed
Printer: The instance is not printed.
External Destination: Mail the instance to "____________" with a subject of " %SI_NAME% %SI_STARTTIME% ".
Data Refresh Settings: Use the server defaults.
Start Time: 8/4/09 1:00:18 PM
End Time: 8/4/09 1:01:07 PM
Server Used: gmmc-crs.reportjobserver
Error Message: server error. SMTP_E_TCPSOCKET_OPEN(2): CrystalEnterprise.Smtp
We tried changing the gmmc-crs.reportjobserver with no luck.
Thanks,

Hi,
You need to start with your exchange logs and possibly enable tracing on your BO webi/crystal/destination job servers (depending on the type of report and whether or not it is scheduled) to get an idea of how far down the line the SMTP connection is getting.
You could also confirm a few key things:
Have the SMTP destinations on your BO servers been updated with the new SMTP server info
Can you telnet to the mail server on port 25 from the BO server - if not, then check the firewall between the two servers and change the existing ruleset to allow connectivity to the new server
Possibly the old mail server didn't require authentication and the new server does, you could test this through telnet?

Exchange Server 2010 with SP3 Management Tools

Recently I have installed brand new Exchange Server 2010 with SP1 in my test domain. Afterwards I upgraded it to Exchange Server 2010 with SP3. On client machine (Windows 7 Pro with SP1 x64) I run setup.exe for Exchange Server 2010 with SP1 installation
DVD to install Management Tools. All checks passed successfully but after installation was completed there was an error in EMC:
The World Wide Web Publishing Service (W3SVC) isn't running on any Exchange servers in the site. If you want to connect to Remote Powershell, this service must be running. Make sure that the W3SVC is running on at least one Exchange server.
Of course service is running. I read this has something to do with different versions of Exchange Server itself and Management Tools. Since there is no installation of Exchange Server 2010 with SP3 how to solve this? I assume if I have installation of Exchange
Server 2010 with slipstreamed Service Pack 3, management tools installed from this installation would work.
Also does this mean that, if I have working tools for Exchange Server and SP for it is installed later, tools will stop functioning?

I would install SP3 on all servers and workstation as SP1 and SP2 aren't supported anymore and see how it is behaving...
http://blogs.technet.com/b/rmilne/archive/2013/01/04/end-of-exchange-2010-sp1-support.aspx

How can I add an Outlook account to iCloud? It is my work account and it works through an exchange server.

I am trying to add an existing Outlook account to use via iCloud on my computer. I get a message that there is no profile set up and the exchange server is not available. I am not an electronics whiz, (if you haven't guessed that already). I would appreciate any suggestions.
Thank you!
Moby

With more words
http://www.ralphjohns.co.uk/versions/ichatvers4/howtoStartiChat.html#alternative s
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
11:53 PM Wednesday; September 2, 2009

How to configure email through microsoft exchange server

Curve 8520 with vodafone

Instructions
1 Click the “Full Menu” button located to the immediate left of the trackball.
2 Click the “Settings” icon in the Full Menu.
3 Click the “Setup Wizard” icon on the Settings page.
4 Click the “Email Setup” link in the Setup Wizard.
5 Select the first radio button labeled “I want to create or add an email address.”
6 Click the “Next” button twice.
7 Type the email address for the account on the Microsoft Exchange Server in the first input box.
8 Type the email account password provided by the email administrator.
9 Click the “Next” link. The device will attempt to access the email account on the Exchange Server and download items. If connection is successful, the email account has been successfully added to the Blackberry.
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

How can I clone a completed Exchange Server 2013 in a Lab Enviroment?

I was having great time with my Exchange Server 2013 until I tried to clone it to avoid fresh installation of another Exchange 2013 server. Steps taken
(1)Clone the Exchange1 and turn it off
(2) Brought the Clone Exchange2, renamed it, change the IP configurations,
(3) Re-ran the ADprep/Doamin prep
(4) Checked the ASDIedit to verify the Schema/configuration in AD
(5) Restarted I and was able to logon to the Exchange2
(6) Brought up the Exchange1, but unable to logon because the name was no longer in AD database
What I did to fix this:
(7) Rejoin the Exchange1 to the domain - and was able to logon
(8) Unable to access ECP or OWA of any of the two servers.
(9) Errors received - Fix the configuration file of the application
My Question - How to I fix the configuration file as suggested (via powershell or GUI or ASDIedit.msc)?

Unless you are cloning an entire environment, and then bringing it up in a seperate isolated environment, it is not supported to simply clone an Exchange Server, and then bring it online in an existing environment and rename it to save on setup and configuration
time.
You can script the setup and configuration of Exchange through Powershell, either with scripts or with another product controlling it - something like
System Center Orchastrator.
From the script side of things there are many available on peoples blogs. Check
here.
Edit: and to be clear, there is no need to re-run any prep tasks against Active Directory when installing a new Exchange Server, unless you are installing into a new domain as part of your Forest.
Oliver
Oliver Moazzezi | Exchange MVP, MCSA:M, MCITP:Exchange 2010,Exchange 2013, BA (Hons) Anim | http://www.exchange2010.com | http://www.cobweb.com | http://twitter.com/OliverMoazzezi

Re: (forte-users) HTTP request through proxy server

Daniel -
No, it does not. ;)
How do you say to HTTPRequest to go through proxy?
Thanks,
Taras
Daniel Nguyen wrote:
>
Hi,
It works very well. I have experienced this model for a distant Forte client
calling a Forte Server service Object for instance without any environment
and without TCP access (passing through firewall for instance).
It has also worked very well to make an injectot to improve Web Enterprise
and IIS using the SendRequest from HTTPAccess.
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Taras Katkov a écrit:
HTTP request through proxy server using forte HTTP library?
Any experience?
Thanks,
Taras
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com--
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

You can also use the HTTP-DC project.... You don't
need Web Enterprise for this. From what I can tell,
this is available in L.x on....
There is api documentation in M.2 (with scant
examples.)
There's a special process to put the project in your
repository (it isn't installed in the repository in
the standard install,) the documentation in M.2
(probably in M.0 too, AFAIK) that tells you how to do
this (look for HTTP-DC in the online help.)
I haven't done much with it yet, I've just installed
it. If anybody out there has examples, that'd be
great. I'll try to contribute more the moment I get a
chance to explore it....
Christopher Fury
BellSouth Communications Systems
--- Daniel Nguyen <dnguyenclub-internet.fr> wrote:
Hi,
If you have Web Enterprise, you can user
HttpAccess.SendRequest().
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
Amin, Kamran a écrit:
Is there any way to make a HTTP request from TOOLto another HTTP Service?
thanks in advance.
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. Tounsubscribe, send in a new
email the word: 'Unsubscribe' to:forte-users-requestlists.xpedior.com
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To
unsubscribe, send in a new
email the word: 'Unsubscribe' to:
forte-users-requestlists.xpedior.com
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/

Settingup Exchange server available through proxy - How?

Similar Messages

Maybe you are looking for