Settlement - collective processing CJ8G

Dear PS experts,
Is there a limit in how many Projects/WBS can be settled in one run?
We have a situation where individual project settlement would work just fine, i.e. created RA FI and COPA postings etc..., but when run in CJ8G, only COPA postings are made and no/some FI entries were created.
I am thinking whether this is related to the limit of how many FI posting lines SAP can handle, or just a limitation of the settlement program.

no limit as far as i know

Similar Messages

  • Collective processing for status CLSD for production order

    Hi, All.......
    Is there any provision or Tcode to give status CLSD for all Production orders.......
    I hv checked COHV tcode but except TECO there is no provision for CLSD.
    Yogesh.........

    Hi Yogesh,
    Now there are 2 things involved in this..
    1. CLSD or DLFL
    2. Collective settlement of the Orders
    Isn't it??
    2. Collective Settleemnt of the Orders/Collective Processing with CO88.
    Before this there will be other steps also like Over head calculation, WIP calculation, variance calculation etc.. So, check with Controlling Team also..
    After that, you can device a Process for this and instruct the user to follow the process..
    1. Until unless you does the Settlement, it is not possible to have the Status CLSD/DLFL
    For collective updation of the Status DLFL, you need to go with the Program PPARCHP1.
    If you execute the Program with SA38, in the next scrren, you can select Multiple Orders or as per the selection criteria and Tick the Chcek Box for Deletion Flag only..
    Regards,
    Siva

  • Collective Processing VL10 is not grouping deliveries for same sales parame

    Hi.
    Created multiple sales orders for same sales parameters like ship to, sold to, sales org, etc.
    When tried to process collectively the delivery ceation via VL10, system generated group for each delivery selected instead of creating group for multiple deliveries.
    When I compared my client's system config with Standard config client, it is exactly same in terms of all parameters, scenario profile, delivery creation profile,etc. The standard system works as expected and grouping the deliveris and create one group for multiple deliveries.
    The group type is L and delivery categories we are tryign to group is J & T.
    Thanks,

    hi sridhar
    Collective processing of deliveries means delivering the few order collectively. that means one delivery document for  all orders.
    In vl10h u can access only orders due for delivery.
    first of all mark the orders line items to do collective processing deliveries.

  • Settlement of process order in G/L account

    Dear Guru
    In our client scenario for FG we are using "V" as price control. During settlement of process order the variance amount is hitting in the "stock of fg produce" + and "cogm"  - ve entry.
    but our client need the variance (balance) of order to be hit in separate G/L account in steed of cost of goods manuf.
    In OBYC for transaction "GBB" in which general modification we need to assign the req g/l account.
    if i am wrong pl give me some solution to solve the above requirement.
    i know that if price control "s" is used it will hit price diff account.
    if any other details required pl reply.
    regards
    vinoth
    Edited by: vinoth on Jul 15, 2010 11:59 AM

    Check GBB/AUA.  If GBB/AUA is not maintained, then it will use GBB/AUF.
    Edited by: ayethebing on Jul 15, 2010 6:34 PM
    Edited by: ayethebing on Jul 15, 2010 6:36 PM

  • Settlement of Process order aginst the Sale Order

    Dear friends
    This the scenario with respect to product cost by sale order settlement profile. When I am settling the process order, which is created with reference to Sale order, system throwing an error "Define a settlement cost element for receiver type SDI".
    When I see the explanation given by system, the following message displayed :
    "Diagnosis
    In allocation structure Z1 (controlling area RI01), you did not define which cost element should be used when settling costs/revenues of the sender. Nor did you define receiver type SDI.
    Procedure
    Assign a different allocation structure to the settlement sender (-> Master data -> Settlement rule -> Goto -> Settlement parameters), or maintain allocation structure Z1.""
    For this I have defined one Secondary cost element and assigned to Allocation Structure under Settlement cost elements.
    Still I am getting the error. What could be the reason?
    Please do the needful.

    Hi Kiran
    In the Allocation Structure Z1, you need to define the Settlement cost element for the receiver category SDI. Have you done that?  Cost element should be created with 21 Cost element category.
    Dont Select By Cost element.
    Regards,
    Suraj

  • Settlement of process order

    In PP-PI  We want to use active ingredient for scenario:
    Our Raw material is MINING ORE which will have varying proportion of COPPER & COBALT.
    Valuation of ORE is based on itu2019s content of COPPER & COBALT content. So we will use active ingredient to capture value of this raw material based on it content of CU & CO.
    Now when we issue this material for production to process order, our semi finished output ( Say SFG1) will also have varying content of COPPER & COBALT based on kind of input quality. There will several process orders doing diff. processe.
    Now my query is
    1)     Can we settle the process order variance to COPPER & COBALT content of SFG1 instead of normal settlement to SFG1?
    2)     Can I maintain my valuation of SFG1 based on COPPER & COBALT content?
    3)     Do we have any user exit or BADI available to replace SFG1 with CO& CU in process order settlement rule?
    4)     In standard cost estimate can we capture COPPER & COBALT characteristics?
    Ultimately COPPER & COBALT are our finished goods.
    I try to search sap help but not much info to help me on this.
    Your input will be highly appreciated.
    Nitesh

    Hi,
    The concept explained is typically a co-product scenario:
    Ore produces SEMI COPPER and SEMI COBALT.  SEMI COPPER and SEMI COBALT produce FIN COPPER and FIN COBALT.
    This scenario is covered under u2018CO-PROUDUCTu2019 concept.  Here Ore is Raw Material, SEMI COPPER and SEMI COBALT are SEMI-PRODUCT and finally COPPER and COBALT are Finished Product.
    Now estimate the standard cost for your SEMI-PRODUCTS and FINISHED PRODUCTS using integrated BOM.  Sit with your PP Consultant who can give you good input for costing the products whether based on quanity yield or quality yield.
    Once this is tested and found the results are expected, the solution can be freezed.
    Please let me know your feed back.
    Regards,
    Ashok

  • Concurrency Visualizer Extension (VS2013): "An unknown error occurred while trying to start the collection process."

    Not sure if this is the right place to ask about this but since my question concerns an extension I'll give it a shot.
    I'm trying to use the Visual Studio 2013 Concurrency Visualizer extension to debug a simple test console application. I've set executive paging to disabled in the registry as it directed and hit "add SDK to project" in the concurrency
    visualizer menu options. And of course, restarted my computer to apply the settings. When I try to "start [the concurrency visualizer] with current project" I get an error popup:
    "An unknown error occurred while trying to start the collection process."
    I really need the concurrency profiling to start debugging contention in my multithreaded application. Prompt assistance would be much appreciated.

    Hi,
    This forum is to discuss and ask questions about extending and integrating with Visual Studio (using the Extension Manager, building VSX containers for deployment, Visual Studio SDK, and more), Visual Studio Online (REST APIs, service hooks, and OAuth),
    and Team Foundation Server.
    You have problems when using Concurrency Visualizer Extension, please ask in
    the page under "Q AND A". Since Concurrency Visualizer is a diagnostic tool, you can post this issue in
    Visual Studio Diagnostics (Debugger, Profiler, IntelliTrace) forum too.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Process China Collect Process

    Hi, Experts,
    I need to add a decision step in my process chain so that if one of the precedessor sucess, it will continue the chain.
    That is to say, the process chain will continue only when all the predessors finish and at least one of them is finished with green.
    I tested the "OR" collect process type, it seems that it doesn't wait the finish of all the predessors. If one finishes with sucess, i would continue.
    Can someone confirm that and give me a solution?

    Hi, Srinivas 
    To what i know, the OR will run every time if one of the predecessors finish with sucess. Ex: If you have Step A1, Step A2 and Step A3 at the first level  in paralel, then you have OR linked these predessors to Step B.
    For the instant T1, STEP A1 is still running, Step A2 is finished with success, Step A3 is finished but red.
    > Step B will run as Step A2 is green.
    For the instant T2 (T2>T1), STEP A1 is also finished with green, STEP A2 is finished already finished with sucess, STEP A3 is red,
    > Step B will run again as STEP A1 is green.
    This is what i understand the collection type "OR".
    What i need is to wait until all the predecessor finish, and at least one of them finish with sucess.
    If we continue with the above example, the process chain will wait until Step A1 and A2 and A3 are all finished, then it will look at the status. If there is one green, it will run Step B. But Step B should only run ONCE.

  • Collective processing for i.o -kok4

    hi,
    Does anyone know if it is possible to process Pm orders (cat 30) using co transactions kok3,kok4?
    Amit/

    Hello
    I am unsure of the mentioned TCodes.
    However collective processing is possible, provided the range is visible in the selection screen of the order processing.
    Technical name: SAP_PM_WOC_ORDER_PROCESS
    Tasks
    This role contains all the functions that you require to process orders.
    Activities in Plant Maintenance (PM)
    The following activities for orders are available with this role:
    Creating/changing/printing an order
    Creating a sub-order
    Changing operations
    Changing the component list for an order
    Where-used lists for production resources/tools
    Reg
    assign pints if useful

  • COLLECTIVE PROCESSING

    HI GURUS,
        i wanna know exactly how  a collective process work coz when iam creating so.... my orders r not getting combined for  a particular customer....in a process how can i select all the groups ?is it possible for me to see the combined orders in VL03N?......pls any one help me out in this.....

    Hi manoj.,
                     To do collective delivery for the orders you have to tick the order combination is sales area data of the customer,and at the time of delivery you shouls have the same shipping point,Route,Inco terms,shipping date & same ship to party,For collective billing different deliveries you should have same payment terms,invoice dtae,Destination country,currency and same payer,You can see the orders to be combined for delivery in VL04 & VL10a also
    REWARD if helpfull
    Thanks & Regards
    Narayana

  • Collective processing of g/l master data

    HI..
    We have a requirement to change the  data in COA segment and Company code segment /names of several g/l a/cs at the same time .I know the option to change thru FS00 (fs02)only for one g/l at a time.
    Any one tell me how to do collective processing?
    regards
    Moderator: Please, post in relevant forums and avoid asking basic questions

    HI..
    thanks for ur immediate reply.

  • Tcode for Sales Order Output(collective processing)

    Hi
    What is the tcode or program to print sales orders collectively, similar to VL71 for deliveries & VF31 for invoices.
    Regards
    Uma

    Hi Uma
    There is no such T code for sales order print.
    You can use SE38-> run RSNAST00 program for sales order output (collective processing).
    try and revert.

  • Collecting Process Chain Statistics

    Hi anyone,
         I'm looking to write some ABAP Code to collect Process Chain Statistics so they can be coherently evaluated and not by looking at the process chains individually. I'll be looking to identify variances in # of records, load times, etc. so I can send out alerts.
         I've been able to collect a lot of Process Chain Process information so far using existing API and FM calls.  I'm able to get down to the Process Log Levels so far, but I'm trying to think how to go about collecting the actual key figures I need. 
    <b>I'm looking to capture things like the following:</b>
    - Statistics of each process chain and related process chain process like I need to know that my ODS activation started @ 10am actived 10,000 records and ended at 10:01 am. (how long it took).
    - I need to know that my data load loaded 1,000 records and how long it took.
    - I need to know that my rollup compressed x number of records and took how long.. Etc, Etc, Etc.
    I know the BI Administration Cockpit in 2004s might provide some/most of this information, but it isn't an option right now.
    The way I see it I really only 1 option with a 2nd potential option:
    1. Most likely option is to write a program to go out and collect the statistics for all the processes executing the program on a scheduled basis.
    2.  Modify/Copy the process chain process classes to somehow output the statistics I need.  No idea how I would do this yet.
    So again I am currently down to the process level logs and just don't know how to collect the statistical key figures I need like how many records were loaded, compressed, activated, etc...  I'm thinking of somehow parsing the logs to get the key figures, but that seems like it would be difficult.
    Anyone have any suggestions or ideas how to collect this information so I can report on it?
    I posted this here because I thought the bw abappers would frequent this area.  Also, If anyone thinks this would be better suited in another forum then please suggest.
    Thanks,
    Ken Murray

    Do you subscribe to BWexpert?
    There is an article a person posted specifically on this...
    <a href="http://www.bwexpertonline.com/">BE Expert</a>
    "Identify Failed Data Loads with This Check Tool"
    Thanks.
    /smw
    Message was edited by: Steve Wilson

  • [Sale Based Rent] RESRSE- Settlement step Processing of SBR not successful

    Hi everyone,
    While processing Sale Based Rent Contract by RESRSE,
    I got some errors as below ( I'm using Cod Type: Sale Based Rent of System)
    Step Posting of Sale Base Rent in Financial Accouting perform on 21.12.2011 at 11:14:4
    Message for Receiving Posting
    LO REC 4000/HAS 01/50, period 01.02.2011- 28.02.2011, settlement step Processing Sal
    LO REC 4000/HAS 01/50, period 01.03.2011- 31.03.2011, settlement step Processing Sal
    Message for General Cashflow Records
    LO REC 4000/HAS 01/50, period 01.02.2011- 28.02.2011, settlement step Processing Sal
    LO REC 4000/HAS 01/50, period 01.03.2011- 31.03.2011, settlement step Processing Sal
    Message for Object Transfer
    LO REC 4000/HAS 01/50, period 01.02.2011- 28.02.2011, settlement step Processing Sal
    LO REC 4000/HAS 01/50, period 01.03.2011- 31.03.2011, settlement step Processing Sal
    Message for Transfer of Advance Payment
    LO REC 4000/HAS 01/50, period 01.02.2011- 28.02.2011, settlement step Processing Sal
    LO REC 4000/HAS 01/50, period 01.03.2011- 31.03.2011, settlement step Processing Sal
    I thought I was missing somethings. Please advise!
    Regards,
    TienLQ

    Hi Li,
    It is very difficult to find out what went wrong basing on message number, that to message class RECAPR is common message class and it will be used everywhere in RE process (settlement, periodic postings ......)
    if you provide some more details, somebody can help you.
    I think all your error message relates to same issue, provide error log details for any single step.
    rgds,
    Srini

  • Event data collection process unable to write data to the Data Warehouse

    Alert Description:
    Event data collection process unable to write data to the Data Warehouse. Failed to store data in the Data Warehouse. The operation will be retried.
    Exception 'InvalidOperationException': The given value of type Int32 from the data source cannot be converted to type tinyint of the specified target column.
    Running SCOM 2007 R2 on Server 2008 R2 with SQL Server 2008 R2. I can only find a single reference to this exact error on the Internet. It started occurring on a weekend. No changes were made to the SCOM server directly before this occurred. Anyone know
    what the error means and/or how to fix?

    Hello,
    I would suggest the following threas for your reference:
    Troubles with DataWarehouse database
    http://social.technet.microsoft.com/Forums/en-US/operationsmanagergeneral/thread/5e7005ae-d5d8-4b5c-a51c-740634e3da4e
    Data Warehouse configuration synchronization process failed
    to read state 
    http://social.technet.microsoft.com/Forums/en-US/systemcenter/thread/8ea1f4b9-115b-43cd-b66f-617533703047
    Thanks,
    Yog Li
    TechNet Community Support

Maybe you are looking for