Settlement for Material that has Co-Product

Hi people,
I have a main material that has 3 co-products.
In the transaction: COR2 in settlement rule, we have put the % for each product (for the main product and his co-products).
When I execute the transaction CO8B to (preliminary settlement for co-procuts) the system run ok, but until this time, nothing was to the inventory.
So I thought that when we executed the transaction KO88, the amount will go to the inventory in the main produtc, but it didn´t happened.
Maybe i did some thing wrong.
Could you help me how I can make the settlement to show the value in the main material?
Thanks.

Hi,
Check the Apportionment structure in the Main material master, I think you should have given Equivalence number for the main and all the 3 co products.
Same ratios will be taken up in the Process order too. you are not required to give %.
Just check whether this is in place.
CO8B is the transaction code to divide the cost on the Process order in the ratio mentioned to all the Products. But this will not flow the cost to the Inventory.
Once you do the above transaction, then the cost on the Process order is divided among the Main and Co products.
Then you execute KO88, it only settles either the WIP or the variance on the order to FI. But Inventory is increased when you do GR
Hope this helps.
Thanks & Regards,
Ravi

Similar Messages

Restricting Production Order to be saved with Material that has No BOM

Hello Gurus,
I am not sure if I have missed something in the setup for the shopfloor control.
The situation is this, I have a finish goods material that has no BOM. I tried converting the Planned Order to Production Order but when I was trying to save the order it prompted "No Material Component", subsequently been SAVED!
Kindly provide assistance to resolve this concern.
Many Thanks,
Nap

Goto OPJK and for your order type Availability 02 under release material choose 3.No release if parts are missing
sytem will allow to save order but it wont allow to release and ultimatly to confirm.

Link Material Document generated for material movement due to production

Hello Expert,
I am creating a zreport for Material Consumption during Production. I am assuming Confirmation entry in PP module as a base of this report and linking to Material Movement data in MM Module. But I am not able to link this data from tables.
Can you pls guide me how to link Material Document generated for material movement due to production confirmation entry and actual production confirmation entry.
Thanks
Shailendra

Hi Shilendra ,
You can create a report with the logic. That all the materials which are created due to backflushing confirmation are created with movement type 131 and the component material are consumed by movement type 261.So you can create the report with this logic.
Dont forget to award Points if it helps.
Lekhram

Settlement for Material

Hi ,
I have Production Order for 1 FG which is having 10 SFG in assembly line and the Production is based on MTS .
During line assembling there was some material consumed against Rework . When settling Production order
the variance is settled in Variance a/c ( GL a/c ) . I dont want to settle this to G/L But want to settle to Material
ie COGS .
example : Production order Qty 10
                 Cost of FG --- 10 Rs each ( standard cost ) + overheads ( x )
                 variance Rs 20/-
                 total Production cost Rs 120 + x
The variance should settle to material ie COGS ie Rs 10 + x / 10 + 2
how to do in SAP ?
Regards,
Jaya

closing

I cant find my apple account that has 2 products registered

i cant find my apple account that has 2 products registered in this account

You are sure that you registered to them an account, you've tried registering them to an account to see if it works ? If you can't add them to your account then you've checked all accounts that you have : https://supportprofile.apple.com/ ?

Unique Entities List for Companies that has Ownership

Hello Everybody,
Does anyone can help on how to create a Unique List for Companies that has Ownership, it means the same entity owned by 2 different parents?
If someone had experienced this before, could you please share your knowledge?
Many thanks in advance, JB

Hi!
I did similar task long time ago in script and logic was like this:
1. make array with owned base entities
2. make entity loop and check if entity is more than once in the first array then add it to UniqueEntitiesList (before adding check for existence should be done)
3. then you can use this UniqueEntitiesList anywhere else in your calculations
maybe there is a way to solve this in a more simple operations

AirPrint laser printer for home that has "n" wifi capabilities

Looking for an AirPrint laser printer for home that has "n" wifi capabilities. Was shocked to findout that most lasers don't do "N" wifi or high speed networking yet. Am seriously considering the HP LaserJet Pro P1102w printer, but just found out it is a nightmare to setup. Thought I could run it by USB port off my Timecapsule… Is anyone doing that? Can it do that? Is there a better alternative?

Hi Scott,
You can also setup the P1102w without the USB cable. What you need to do is to connect the printer via ad-hoc to your iPad first. With the default network settings the printer has its own SSID that you can select from the WiFi list on your iPad. Then open Safari and go into the EWS - either by the printers IP or host name. There you go to Network - Wireless and make the settings for your infrastructure network.
However, both Laserjets will need a FW update that you install from a Mac or PC, so you may already use the install steps there to connect your printer to the network.
Regards,
Mandy

Prompt Group Text value for parameter that has cascading prompts.

<p>Does anyone know how to get a Prompt Group Text value for parameter that has cascading prompts. C# sample would be great.</p>

Hi Sateeesh,
I delete main memory, but does not work. if I display prompt value in list box, it shows as text value, but in 'query prompt selector', it shows as key value. I am using SAP BO 4.0

Settlement for month-end closing, individual production or sales order

Dear SAP Experts,
Our style is MTO.
In month-end closing, we follow to make a settlement for production orders:
1. CO43   -- Actual overhead calculation (collective processing)
2. KSU5   -- Actual allocations Assessment
3. KSII     -- Actual Price Calculation
4. CON2 -- Revaluation at actual prices (collective processing)
5. KKAO -- WIP calculation (collective processing)
6. CO88 -- Production order settlement (collective processing)
Question:
1. What kind accounts will be effected after above each step?
2. does individual production settlement need step 1-4 in above?
    1. KKAX (Work in Process)
    2. KO88 (Settlement)
    Is those enough?
3. What kind account will be effected after va44 processing?
Any tips will be welcome.
Zhou Zhen

Hi,
The value flow completely different for each of the MTO Scenario.
I need to know what kind of MTO scenario you have.
is it MTO - Valuated Sale Order without Sale Order Controlling
Is it MTO - Valuated Sale Order with Sale Order Controling
is it MTO- Non-valuated Sale Order (Sale Order controlling is mandatory)
based on this the value flows and the transaction that need to be executed will differ.
The way you explained i presume that it could be any of the first two scenarios.
in such case, the value flows are as good as make to stock scenario. Only in the third scenario, the value flow completely changes
For 1. What kind accounts will be effected after above each step?
all the accounts relevant for Make to Stock will get affected. But the the scenario is MTO - Valuated Sale Order with Sale Order Controling, the the variances from production order is settled to Sale order instead of settling to COPA.
For 2. does individual production settlement need step 1-4 in above?
All the steps from 1 to 6 are necessary for any of the above 3 scenarios
For 3. What kind account will be effected after va44 processing?
This is for calculating the overheads on the sale order. in this case, the sale order is a controlling object. once this t.code is executed, you can see the oh being calculated on the sale order
Hope this will give some good isight in to various MTO scenarios
Best Regards
Surya

How do I reformat an IPod Touch for Windows that has been formatted for a Mac? All instructions I have been able to find use ITunes or Device Manager to reformat. My IPod is not being recognized by ITunes or in Device Manager.

I have an IPod Touch that has been formatted for a Mac. All instructions I have been able to find use ITunes or Device Manager to reformat the device for Windows. This cannot be done if Windows doesn't recognize the device. Is there another way to set the device back to the factory settings directly on the device without using ITunes?

Ipod touch is not formatted one way or the other at all.
Just sync it to the new computer using itunes.
iPod touch User Guide (For iOS 5.1 Software)

Goods Receipt for Material which has no Standard Price in Process Order

Hello everyone, is there a way by which we can prevent GR for process order which contains material that does not have standard price? And if ever we received material using process order how can we correct the process order right after we correct the standard price.

Hi,
i just don't know why you raised new thread as already ur previous thread is not closed
Now just let us know whether system is throwing any error
or what exactly happing in cofirmation screen
Go to OPK4, here
under goods movement there is option all components just tick it
then in second tab Gen individual entry tick Goods movement & termination for incorrect goods movement
Coming to GR
what is storage location ur giving
just check in MMSC, whether this storage location is activated for the header material ( GR )
Added
Plz Go through all possible options
[Auto GR is not happening.;
Regards
kumar
Edited by: kumar kumar on Nov 10, 2009 2:25 PM

Looking for an docking station for DV9205us that has power pass-thru

I have an HP DV9205us and am looking for a docking station that has a power pass-thru. The power plug on my latop doen't always power up the laptop and this has gotten on my nerves. Is the ES631AA#ABA the only docking station that works with the DV9205us

Thanks for the link.
Hadn't seen that review, but it matches what I conclude about that particular model - there's still lots of connecting & disconnecting to do. It has only one USB port docked, and another one sitting up top. I have many items I'll be attaching via USB, such as Wacom, backup drive, external drive for photos, mouse. And would prefer a Powered version so I don't have to connect the power cord each time either. And if you notice that video, he shpws his desktop consisting on nothing but a keyboard & a monitor. So with the lid closed on the MBA, how's he move the cursor around? Missing a mouse there. (Yes - he could have a wirelesss mouse, but personally, I find a wired mouse much better - but he has NONE.
Hoping to find someone who has actually used one.
From my research, it seems the Landing Zone MAY do what I want, but I can't get answers from them to questions. They have units for 2012 - 2013 MBA's, but I don't see anything on their site about the 2014 model I have.
And there's a few other brands out there - but seeking real life experiences.

Randomly generated competition draw with priority for players that has preference

(1) INPUT
player# ColumnA
Preference
1 player1
music
2 player2
3 player3
music
4 player4
music
5 player5
singing
6 player6
7 player7
8 player8
(2) my original requirement was to pair the players randomly, so i used following solution.
In E1 i have RAND() for 1000 rows (E1000),D1 I have 128 teams
In A1 used this formula
=IF(ROW()-ROW(A$1)+1>$D$1/2,"",RANK(OFFSET($E$1,ROW()-ROW(A$1)+(COLUMN()-COLUMN($A1))*($D$1/2),),$E$1:INDEX($E$1:$E$1000,$D$1)))
copy across to B1 and down as far as you might need.
Assuming you have 128 in D1 then A1:B64 will now include one each of numbers 1 to 128. Subsequent cells will be blank. Change D1 to any even number to regenerate numbers. Note: recalculation of worksheet will re-generate random numbers, hide column E if you
wish
(3) So now i have a new column called PREFERENCE that has preference / interests that players have set.
I want to enhance above formula to give priority to players who have set preferences and do their pairing first with other players who have the same preferences.
If there are no players that have matching pair per perference (e.g singing in above example) then do random match.
If there are no preferences set then simply follow the logic that i have shared above for random pairing.
Appreciate your help!!

Hi JainPaddy,
Thanks for posting in MSDN forum.
Based on the description, you are design a workbook with formula. I would like move it to
Excel IT Pro Discussions forum since the issue is relative to end-user.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction
with us.
Thanks for your understanding.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is there a way to turn on auto complete for text that has to be entered repeatedly? I don't want to use a pop up list.

Is there a way to turn on auto complete for text that is repeated? I don't want to use a pop up list.

No, not in Number for iOS.

Delete Release strategies for PO that has been delete

Hii SAP Expert,
I'm facing this problem whereby there are Purchase Order that have been inactive which mean the line item for the Purchase Order have been deleted. The concern is the release strategies still appear in ME29 for PO that have been deleted.
How do i remove this PO from the release strategies ?

Dear Nikamz,
Check to the PO item detail , if the delivery complete indicator and final invoice indicator is ticked, then the release strategy will remain in document although you already delete all the PO line items, try to untick the indicator and then unreset the delete indicator and delete the item again, see whether the release strategy still exist, also you may try to check notes : 527995(run report ZKSTAPO1 to update the STAPO field).
Regards,
w1n

Settlement for Material that has Co-Product

Similar Messages

Maybe you are looking for