Settlement issue for Pooled asset

Hi all,
I created a notification (type MF) for pooled asset in IW21. I was able to view the notification in the planning board (PAM03). I was also able to do the planning of the demand and was able to reserve, issue and return the pool asset.
Now, I am facing an issue during settlement. Which I try to do the settlement, system is giving an error 'Unable to determine the pool category for requirement'. Message No. PAMS145
Below is the detailed message:
Diagnosis
In Customizing for PAM, you define activity types for each pool category for
each controlling area.
When settling a PAM requirement, the system calculates the service performed
for the activity types defined for 'Rental price' and 'Price/unit.'
The pool category is determined using the equipment or message (in this
order) for the requirement
The controlling area is determined from the equipment.
Unable to determine a pool category for the requirement.
System Response
The settlement of the requirement is terminated.
Procedure
Depending on the business process, store a pool category in the equipment or
the message.
I think I am not able to tie up the pool category which is there in the configuration of PAM with the equipment I created. Has someone faced similar issue before? What could be the possible way to resolve this error?
Thanks,
Tajinder

hello Gandalf ,
Create an IO Through KO01 with extra Create AUC........
Then post the exp to AUC........
Then assign the settlement rule as Fixed assed and enter the Asset number and give % or amount....
Settle the IO through K088
Hope this will resolve your issue............
Regards
Kumar

Similar Messages

Settlement rule for several assets but one internal order number

Hi,
I have a question regarding the settlement rule for an internal order. I have issued an internal order number to capture costs for a construction project. When the project is completed how do I update the settlement rule for the internal order to several assets all for different amounts?
For example an internal order number has collected costs of 150,000.00 for the completion of a building. When the building is complete and I want to do a final settlement of the internal order. I have one asset for land improvements for 43,000, another asset for the HVAC system for 33,000 and building costs of 74,000. When updating the settlement rule I know to create the assets and update the settlement rule with these asset numbers, but I am unclear on how to assign multiple assets with differnt amounts.

Hi ,
In the settlement rule , you need to select the Receiver as FXA and then enter the Asset number and then you will have to put the % that you want to settle to .
Like if you have 100/- Rs. total cost and you want to settle it to 2 assets in 60/- Rs. and 40/- Rs.
Then you will have to enter 2 line items in settlement rule with diffrent asset numbers and in proportion you will have to say 40 % and 60% , based on which the final settlement would happen .
So make the proportion changes in the settlement rule accordingly .
Regards ,
Dewang T

Creating a settlement Rule for an Asset: message error AA311

Hi All,
I have to create e Settlement Rule by KO02. But SAP gives me the message AA311 and doesn't allow me to go on...
Could anyone help me?
Thanks

hello Gandalf ,
Create an IO Through KO01 with extra Create AUC........
Then post the exp to AUC........
Then assign the settlement rule as Fixed assed and enter the Asset number and give % or amount....
Settle the IO through K088
Hope this will resolve your issue............
Regards
Kumar

Error while attaching settlement rule for AuC asset

Getting error "The share to be settled in rule 001 is not unique" "Enter a unique number (001) (view: Actual settlement) " when trying to attach a settlement receiver in transaction AIAB - where to view the duplication of rules, and where to delete the rules ?

Hello
Check the transfer variant / receiving asset / transaction type.
Check all rules again.
Reg

Pooled Asset Management

Hi Friends,
We have configured PAM with the request as Notifications and other related configuraiton settings as available in SPRO.
But when the request is created through Notification Type MF and the same is triggered in PAM03 - Planning Board Profile but the Y axis nothing is getting displayed.
To add more the Equipments confgiured are not getting displayed in Y axis for scheduling the demand. What more settings need to added.
Can anyone have come across a similar issue during your implementation?
Regards,
Selva
Mob: 0091 9620207596

Hi Friends,
I configured the 'PAM' in my company, but save the note appears an error in abap, Could you please help me?
Follows step by step the held configuration, where the dump was presented.
Notification Types ->
Define Notification Types:
Copy standard M1, create MF notification – Pool resquest
Overview of Notification Type -> Screen Areas in Notification Header:
Screen type hdr: H100
Scrn type object: O100
Screen Structure for Ext View:
10\TAB01 (screen area) 850, 065
10\TAB23 (screen area) 850 (Pool Asset)
Priority Type: PM
Transaction CL01 – Create class
Class: ClassPam
Type Class: PAM
Pool Asset Management
Basic Settings for Pool Asset Management:
New Entries
Application: Pool Asset Management
Reservation TXT: Test
Class Type: PAM
Class: Classpam
Edit Object Processing
New Entries
Application: Pool Asset Management
Actv.Entry: flag
typ: MF
Transaction PAM01 – Create pool test
PAM Pool: 01
Category: T
Description: Pam Test
Fac.Calendar ID: none
Holiday cal. ID: none
Functional Loc: Enterprise
Test:
Transaction IW21
Notification type: MF
fill the required fields (ex: Text, PAM Pool and Maintain account assignment)
Clicking save, dump is reported.

Configuration-Pool Asset Management

What is the purpose of configuring PAM class for pool asset management?How these characteristics are helpful during raising demand notificaiton for pool asset? Where I can get the building block for pool asset management?
Regards,
Tehsin

Hi Friends, I am new to SAP fans, Well I am also configuring SAP Pool asset management in my org, I have configured complete scenario and its working fine, the only problem i am facing the cost calculation part for TRIP based on time and running kms when you return the vehicle back to original pool.
In service type configuration i have configured relevant activity types with rate maintained in KP26 for fleet cost center, in PAM03 on demand notification screen , when i click the button 'settle', and ask me to select the counters for time and kms based on readings , it create a Service order in back ground which has status TECO and there are no cost is posted on my service order,
Here i want help from all PAM experts, Am i missing some thing why my cost are not getting calculated and why my Notification status not updating as 'Settled' and why my service order status is TECO
Any help would really be highly appreciated
How this calculation scenario works for PAM for trip cost,
Rajeev

Settlement rule for AUC

Dear SAP gurus,
In AIAB, I have assigned the settlement rule for AUC asset id. However I am not able to see the settlement rule assigned in As03. Is there any report

Hi,
you can see the settlement rule only in AIAB.
regards Bernhard
Edited by: Bernhard Kirchner on Jun 15, 2010 12:52 PM

Error in Class Assignment in Pool Asset Managment

Hello Team,
I am facing problem in IW21 during creation Notification type MF which is used for Pool Asset Management. if possible give me solution
After Click on Equipment below window will open
and in this window if i do next, no processing will happened. If i wish to save this notification system will give error Like Error in Class Assignment.
I checked entries in PAMS_FSET table also.
Thanks and Regards,
Sweta

Hi , Please check whether class PAM is defined for class type PAM in CL02 . If it is not defined please maintain some characters in it.
Regards,

Asset settlement issue from Project System

Hello everyone,
In SAP, we have tied Project System and Fixed Asset in the sense that for each network/activity in PS we create and link an asset in Asset Accounting. In the Purchase Order, the network/activity number is assigned and all the transactions that occur through this PO (including down payment, its clearing, GR/IR) are then settled on the specified asset when we execute settlement run at month end through CJ88.
However, we have encountered scenarios where an asset was not timely allocated to the network/activity but the transactions were carried out through the PO. When the settlement run was executed, its impact was not visible in Asset Accounting. Later, it was realized and the asset was created and assigned. Once the asset was assigned, all the subsequent transactions through the PO were then being settled successfully. But the problem is with those transactions for which the asset number was initially not assigned.
Is there any program that can be executed to include the impact of the previous transactions. Otherwise, suggest alternatives.
Thanks

Hi Thanks for your reply, But that is not relevent to this issue.
The issue here is -
First 2 documents has value date of 4th period and the amount is 8800
Next document has value date of 5th period and the amount is 1200
Now i am trying to settle 10000(8800+1200) with 5th period date. Its givign an error Settlement amount is greater than Available amount
Will it solve if i settle 4th period with 8800 first and then 1200 with 5t period? or any other process?
Thanks
Yadayya

IO Wrong asset settlement Issue

Hi
We settlement rule for internal order 2500007 was erroneously set to settle costs to asset 11 (company 123). That asset is already part of a different internal order.
Costs from internal order ***0007 were settled to that asset in prior periods(from Jan 2104) and depreciation has begun. This is incorrect since the asset should not be related to that internal order.
We would like to reverse the amounts settled to that asset from IO ***0007 and settle them to a different asset instead.
This should result in a reversal of the depreciation booked to this asset from the costs settled from IO ***0007.
Do suggest how to achieve this.
Thanks & Regards,
D Dixon.

Hi,
You have two issue, one is wrong settlement to asset, and wrong amount of deprecation is posted.
First of all you need to reverse the depreciation, to reverse the depreciation, just change the depreciation key to 0000 in asset master AS02, and repeat the depreciation run to reverse the depreciation for this assets. once you verified that depreaction is reversed for this asset, just go AS02 and again change the dep. key to original one.
Second step is to reverse the Settlement, you can reverse the settlement from the same t.code from where you have settled the order, lets say KO88, just go to settlement menu and Click on "Reverse"
After settlement reversal, create the correct settlement rule, and post the settlement, then again run the the depreciation AFAB in repeat mode, to post the correct deprecation.
I hope this will help you.
Regards
Javed

AIAB issue (asset settlement issue)

Dear Sapguru,
On dev system, we are facing an issue for tcode AIAB. In our current process we park & post document through MIR7 & MIR6 respectively. While posting the document we post to CWIP asset & later on transfer from CWIP to actual asset.
But from January 2012, CWIP asset master shows document posted but while transfering from CWIP to main asset through t code AIAB line items are not display. but in QA the same is working fine.
Kindly help us to resolving issue.
Thanks & regards,
Pramod Chavhan

Varsha,
When did you settle the Values from IO to AUC?
If this was done in 2011, just look after year closing and opening new.
If it is in 2012, go to AR01, AR02 and AR03 and check if the values are appearing for AUC
Let us know the results
Thanks

Automatic settlement rule for receiver 'Fixed asset' (with out IM)

Hi Experts
I am working with project settlement to a fixed asset.
I have defined a selttlement profile in which, FXA is the only valid receiver.
Please note that we do not use Investment managent and hence no automatic AUC.The predefined asset to be used for settlement.
In this situation i am unable to generate settlement rule automatically as like the case with CTR.
The below message is experienced.
"Enter a distribution rule for Asset without a validity limit"
However i have manually maintained the settlement rule with specification of appropriate asset as receiver and settled.
In this scenario, how to ensure that the settlement rule is automatically generated, any where can we refer the fixed asset?
warm regards
ramSiva

Hi,
Settlement rule cannot be automatically maintsined, you have to maintain manually, for example if you want to settle to fixed asset, how the system know to which fixed asset it should settle. You have to maintain settlement parameter manually.
Regards,
Sreekanth

Cost settlement only for assets that have been paid

Dear all,
i need to do, at the end of the month, the cost settlement from wbs to asset only for the the part of asset that have been paid.
I don' t know how to do this using standard sap funcionalities.
Theonly way that we think to use is:
- setlle of the entire wbs
- transfer posting (FI) from asset to wbs of the part that have not been paid.
Some of you can help me?
thanks
Elena

Hello friend,
Because I do not understand your requirement to capitalize from AuC to final asset only only those costs for goods/service that have been paid - I would like to give warning that you may not have the requirement correct.
This would not be your fault, but the fault of the accounting users giving you the requirement is my guess.
Receiving against PO may be MIGO, and then posting the vendor's invoice later on when it's received, is MIRO usually.
The actual payment to the vendor is a subsequent posting known as a check cut. The accounting for a check cut does not create the AuC value, nor does it meet any accounting requirement for capitalization.
The accounting requirement for capitalization in almost all countries would be MIGO. Because we have posted the receipt of goods or services, we now owe a vendor somewhere. The liability will be in your non-specific vendor account, GR/IR which stands for Good Received/Invoice Received. MIRO clears out the amount from your GR/IR account, moving it to your reconciling account in the g/l for a specific vendor sub-ledger account. The check cut then removes specific liability from reconciling account, and removes cash from g/l cash account.
Recognizing that we owe the cost of the goods receipt MIGO, it is already fair and required to capitalize the costs to final assets and commence depreciation expense (assumption you have placed the capital fixed assets into service).
So, neither MIRO nor check cut should delay your capitalization from AuC to final completed assets unless your requirement is different that SAP basic scenario. Regards

Transfer posting (OASV) issue for the existing Intangible Assets

Hi SAP Experts,
In our system the APC and Acc. Dep. for ord. dep. has maintained the same G/L Account (A090) so due to this in Fin. Statement it shows the Net Book Value. Now, our client wants to migrate to IFRS, as per this it has to show like ( Intangible Assets - Acc. amortization - Acc. Impairment Loss). Now, I have created new account i.e. 'Accumulated Amortization for Intangible Assets A/c and removed the old G/L A/c (the one which is same for both APC and Acc. Dep.). Now, the old G/L has the APC and Acc. Dep. values so I need to transfer the Acc. Dep. from old G/L to New G/L A/c by using OASV (Transfer posting).
If I make the transfer posting like (the both G/L Accounts are Recon. A/cs)*
      Debit Old G/L A/c    - xx,xx,xxx
      Credit New G/L A/c - xx,xx,xxx
Is it any impact on the values (Intangible Assets) Dep. Area wise? Since, APC and Acc. Dep. already posted to old A/c up to this point of time. Another doubt is, while posting the above entry shall I need to switch off (Reset) Recon. A/c for this Intangible Assets? OR without Reset Recon. A/c can I post this transfer posting? Is this correct procedure or other than this is there any other alternative?
we have 9 Dep. Areas out of which 3 Dep. Areas have posting indicator as '1'. In that out of 3 Dep. Areas one Dep. Area namely 'Impairment Loss' is there but there are no positings till now. After config. change it should allow ABIF tr. that we completed already.
Could anyone explain why this 'Investment Support' Dep. Area (Impairment Loss) doesn't allow APC values by default?
Thanks in advance.
Best Regards,
Sri.

Hi Sri,
Let me clarify your points individually.
1) From system the prospective, it does not make any diff in functionality for a tangable asset or an intangable asset.
2) Add the new GL account in the respective account dtermination as a balance sheet account for accum dep. (while adding, the GL account should be as recon account)
3) Please switch off the recon account indicator in the both GL accounts with OAMK.
For Ex: Lets say you have already posted APC value 10000 Dr and Accum dep 2000 Cr to the old GL account, so the net book value will be 8000 Dr.
In this case Please find out the total value of line items (2000 Cr as per the above example) for accum dep, that was already posted to the old GL account.
4) Post a journal voucher through F-02 like
                                                  Old G/L A/c Dr - 2000
                                                                New G/L A/c Cr - 2000
So after passing this entry you will find account balance as 8000 Dr in old GL account and 2000 Cr in new GL account.
5) after passing the above entry you need to switch on the recon account for both the GL accounts
Hope this will help.
Thanks,
Srinu

Settlement rule for Asset Under Construction not automatically generated.

Hi Experts,
I am working on a capital project scenario where in i configured the SAP IM and SAP PS module. i am able to create AUC at the WBS level on project release,but i am not able to generate the settlement rule for AUC automatically.
Please suggest as to what i am missing to generate settlement rule for AUC automatically.
Thanks,
shiv

i think for automatically AUC to be generated, u need to create investment profile in OITA in that u have to tick mange AUC in investment measure. & select settlement for summary settlement.
This investment profile u need to specify in Project Profile OPSA.
do this setting & let me know whts happen?
ok best of luck.
Regards,
ANSAR

Settlement issue for Pooled asset

Similar Messages

Maybe you are looking for