Settlement Of Capital Items

Dear All,
In my company we are driving Asset Accounting through WBS Element.
At the time of final settlement to asset in CJ88, ideally it should take the Goods inward date as the Asset capitalization date, but its happening.
Is there any customization needs to be done to make the Goods inward date as the Asset Capitalization date.
Waiting for help.
Arjya.........

Dear Madhusoodanan,
Thank you very much for your reply.
I tried as per suggestion & in transaction "Settlement of AUC" i have defined the Prime rule as "3" & the alternative rule as "2".
But now after final settlement its taking the current date of settlement as asset capitalization date.
Please advise me how to go about it.
Waiting for your reply.
Arjya...........

Similar Messages

  • Sub-items settled to main items in Sales Order

    Guys,
    There is a business requirement that all cost and revenue in sub-items are settled to main item in a sales order.
    Is there a standard SAP solution for this?
    Thanks in advance
    Cheers,
    Jim

    Hello
    The material 'item category group' = ERLA ,pricing is only for the main item
    if  'item category group' = LUMF, then pricing takes place only on subitems.
    so you will have to influence the 'item category group'.
    There is also another factor, for e.g."Item category TAN" does not support explosion of BOM, this is because 'STRUCTURE SCOPE FIELD' is blank..You need to check this , and for this you need to access SPRO, which in your case, as I understand, is a limitation. In other words, you need to check this field for ZTAC (it may be empty).
    Hope this helps.

  • WBS Settlement by Line Item

    Hi gurus,
    Can anyone please help me figure out how I can trigger the WBS settlement process to settle by line item and not in summary by assigned cost element?
    please help
    thanks
    Brian

    Brian, 
    Did you ever get this quesiton resolved?  I'd like the answer if you did.
    Thanks,
    Ralph

  • Add. Excise duty not picking up for capital items - Country India version

    Hi
    While capturing duty using T.code J1IEX for Imported capital items Additional Excise duty is not getting captured properly. 50% should have been captured fot the current year and the balance carried forward to the next year.
    Help reqd.

    Hi,
    Have u defined AT2 in Specify Excise Accounts per Excise Transaction and CENVAT on hold under CAPE transaction type. Have u defined G/L account for these under Specify G/L Accounts per Excise Transaction.
    whether material in question has been defined as Asset type in J1ID. check all these configuration.
    Regards,
    Venkatesh

  • Asset (Capital item purchase)

    Hi All,
    Please put some light on what all cases it is recommended to keep a material code for the Capital items (asset ) and in what all scenarios it is recomended to procure the capital item on the short description by NOT creating the material code.
    and if the material is recomended to create, so under what material type it shoudl be created.
    and in both of above cases , it is required to give the asset no in the account assignment in the purchase order.
    Thanks & Regards
    Nitin Chhabra

    If you purchase very often than better to have material number otherwise you can maintian just description.
    Material type should be non valuated because asset depreciation can be taked in asset accounting.
    yes you have to first create the Asset and assign into the PO.

  • IS Retail -  Automatic evaluated receipt settlement for return items

    Hello experts,
    I'm in a new instalation of SAP Retail (ERP 2005).
    Can anyone tell me how to use Automatic evaluated receipt settlement for return items?
    I know that i have to check this box in the vendor master.
    What i wanted to know is how does the system generates automatically debit notes to the vendor:
    - Aren´t debit notes used exclusevily for SD module? If so, do i need to create the vendor in the costumer master and associate it to the vendor master?
    - And after this, when i make the return to the vendor, the system generates the debit note automatically? how?
    - for this process what do i need to do in spro?
    Thank you in advance
    Answers will be rewarded
    Diogo

    Dear Diogo,
    You can use MRRL transaction code. Now, system will post credit memo
    Bye,
    Muralidhara

  • Excise for capital items

    Hi Experts,
                   We have captured excise for some materials as capital items. Afterwards we got that they are not capital items. Is it possible to change the previous entries?
    Thank you
    sap mm

    Hi,
    If you have alredy posted -Part2  entries in J1IEX  then you can't change those entries through J1IEX -Reversing or cancelling.
    If only caprtued then you can cancel that Excise invoice and you can re capture that excise invoice and and while capturing you can change Materials from Cap  to Raw materials
    If Part-2  updated then You can change the Material from -Asset to Raw materials in -J1ID  but for the Excise entries already posted requires to pass -Excise JV in J1IH  for changing Register RG23C  to RG23A.
    Use additionExcise and other adjustment entries from J1IH  too update the RG23 C register.
    with regrads
    Shrinivas gangoor

  • At times normal PR is prepared for capital item procurement. Due to this, a

    At times normal PR is prepared for capital item procurement. Due to this, a normal PO is made for capital item procurement

    Is this a general note or a question

  • Work Order to cost center settlement with line item detail

    Iu2019m having difficulty finding a method to settle from a work order to a cost center with line item detail.  When an order is settled with KO88 or KO8G the total value for that work order/cost element combination is combined and posted to the cost center as a lump sum with the description of CTR\######.  Users would like to see the individual values that posted to the work order in a cost center report such as  KSB1.
    I donu2019t see anything in the settlement rule, settlement profile or allocation structure that will allow line item settlement from work order to cost center.     Is line item settlement possible when settling to a cost center?   Is there an alternate way to see these expenses as line items in KSB1?
    Thanks,
    Jeff

    Thanks Christian,
    We've defined an allocation structure that we use for Project System and Work Order settlement and have Receiver Categories established as FXA, CTR and WBS with "by Cost Element"  checked.  Work order costs do settle to the cost center entered in the settlement rule, the problem is it combines all items values as a single amount when posting to the cost center.
    For example:  
    expenses post to the work order under cost element 500000 for $500, $200, $300 and cost element 600000 for $250 and $250.  The settlement rule says to settle to cost center 170000.  When the settlement takes place cost center 170000 is debited $1000 to cost element 500000 and $500 to cost element 600000.  We would prefer to see individual posting of $500, $200, $300 to 500000  and $250, $250 to 600000.
    Thanks,
    Jeff

  • How settle to Capital work in process

    hi sap kings.........
    what are the steps require to setlement of AUC. explain to me detailed prcess.

    Line item settlement:
    AIBU - For settelling Line items if you are not using measure.
    Investment measure is Internal order:
    KO88
    Projects
    CJ88
    Regards
    anantha

  • Distribution and settlement of capital assets

    Hi!
    How do we distribute, settle capital assets under construction?
    How to define maximum amount for low value asset in depreciation areas?
    Thank you
    DD

    Hi!
    For AUC you need to carry out below:
    -Enter distribution rules
    -Transfer assets under construction
    -Reverse settlement of assets under construction
    How to define maximum amount for low value asset in depreciation areas?
    Via Customizing.TCODE ::OAYK
    Below Path :
    Asset Accounting ->Valuation -> Amount Specifications (Company Code/Depreciation Area) -> Specify Max. Amount for Low-Value Assets + Asset Classes.
    Cheers,
    Sudhanshu
    My points...
    Message was edited by:
            Sudhanshu Shekhar Tiwary

  • ERS Settlement MRRL Exclude items

    Hi SAP Gurus,
    We are using ERS Settlement transaction MRRL on ECC 5.0. 
    When I ran the settlement, there was an item that I wanted to exclude for the current settlement run.  So I selected the item and then clicked the save button (exclude from ERS).  But now, I want that item to appear in a subsequent settlement run and it does not.
    How do I get it to appear?
    Thanks for your help.
    Linda

    Hi Linda,
    You can do the itemwise settlement for ERS vendor & it is working fine in my case.
    I am also working in ECC 6.0
    How many line item you have in your purchase order.Please write in detail.
    Regards,
    Manish
    Don’t forget to give point if useful ans.

  • Transfer of Capital Items

    Please ignore this query.
    Edited by: VT on Jul 14, 2009 12:01 PM

    If you mean iTunes Store accounts, then no, there is no way to transfer any item from your iTunes Store account to theirs. You will need to have their computers authorized to your iTunes Store account to them to be able to use their already-purchased content (music tracks should not need authorization) or get updates to apps, though they can make future purchased through their own iTunes Store accounts.
    Regards.

  • Vendor open item amount to settle with two different banks  in F110.

    Hi
    Actually client requirement is one vendor line item to settle two different banks. Is there possible in APP program TC F110?
    How we can configure and how to settle one line item with two different banks in APP program.
    Please give me suggestions as soon as possible.
    Venkatesh
    Edited by: vdd08381 on Nov 5, 2011 1:19 PM
    Edited by: vdd08381 on Nov 5, 2011 1:20 PM

    Hi,
    Actually client requirement to work on one line item to settle two different banks.
    Once we have done partial payment to vendor can not give to cheque to vendors. My point view this is not possible.
    Is there any option please post the customization?
    Venkatesh
    Edited by: vdd08381 on Nov 7, 2011 5:36 AM

  • Capital project WBS settle to AUC individually

    Dear all experts,
    please help me on the following issues.
    i am working on a capital project. Investment profile is defined and assgined to the project profile.
    the top WBS is T-09-001
    the second level WBS are T-09-001-01,  T-09-001-02,  T-09-001-03,  T-09-001-04, T-09-001-05 for example.
    the third level WBS is T-09-001-05-01.
    i do the test settlement when the project status is release. (i didn't maintain the settlement rule.)
    the result is that every single WBS is settled to a FXA (the numbers are generated automatically)
    for example
    T-09-001-01 to  FXA 1000/40047/0   30000CNY
    T-09-001-02 to  FXA 1000/40048/0   40000CNY
    T-09-001-03 to  FXA  1000/40049/0  40000CNY......
    i am not sure if it is correct or not, because it's my first time to deal with capital projects.
    if i want to settle all the sub-WBS to top WBS and the top one settled to AUC, how can i do it.
    i manually maintain the settlement rule for all the sub-WBS to top WBS and settle the project again.
    but the result is the same. i don't know where the problem is.
    please tell me how to do it or how to settle the capital projects in most cases?
    thanks a lot.
    judy

    Below was something which we had done in such case:
    1. Created a substitution rule against the WBS element, if the level of WBS >=2 substitute the Investment profile with 'Blank'. With this when ever you create a project and save it or call the substitution from menu, system would retain the investment profile on level 1 WBS and when project is released only 1 AUC is created for the project which is on level 1 WBS.
    2. Settle all other lower WBS to it's parent WBS and you can implement OSS note 211324 - CJB1: Strategy for settlement to superior WBS. Refer the below link about how this works:
    http://wiki.sdn.sap.com/wiki/display/PLM/ModificationnoteforStrategyforsettlementtosuperiorWBS
    Doing both the above, you would create only 1 AUC (on level 1 WBS) and finally settle all lower WBS to level 1 WBS and from there system would then automatically settle the costs to AUC fixed asset.
    Regards
    Sreenivas

Maybe you are looking for