Settlement of freight charges in KO88 not settled
Dear Friends,
In KO88, In Settled values - Asset of value 10000 is displayed and freight charges 1000 is displayed.
The settlement run is completed with any errors.
I went to the GL Account - Asset under construction, here the freight charges 1000 are being displayed as open item.
Please suggest why freight charges are showing as open item. The user is saying the GL account should displayed zero balance.
Regards
Sridhar
Dear Friends,
When trying to execute the KO88, I am getting the following message.
Either the sender is already settled, or there is nothing to settle
Message no. KD213
Diagnosis
Possible causes:
The balance on the sender is zero.
There is nothing to settle for the settlement type selected.
Example: Periodic settlement
Distribution rule: Percentage rate 50%
Receiver cost center 1
Settlement type PER
Charge in the posting period: $200
Credit from earlier settlement: $100
The distribution rule always applies to the period value (here: $200). At the month end, 50% (here $100) was settled. This leaves nothing to be settled when the period close is repeated. The balance (here: $100) can only be settled using full settlement or an additional distribution rule.
Please suggest how to solve the error.
Regards
Sridhar
Similar Messages
-
In Sales Order form Freight Charges form is not updating Freight
Hi,
In SAP BusinessOne(8.82) sales order form -> freight charges form not updating(filling) the freight in amount field.
It is working on 2007 version . can any one tell which tables to use to update the Feight .
Thanks,
Y.Hi Yugandar.....
Update Freight means what?
Are you not able to put the freight charges manually?
Or you are trying to fill it programatically?
Regards,
Rahul -
Process order settlement Ko88 not working.
Hello Sapients,
i am getting a message:"There are no accrued amounts; settlement is not possible."
Following are the steps i cariried.
1.) created a Process order CR01
2.) did goods issue to the process order using MIGO_GI
3.) when i run KKAX I am able to the costs in WIP.
4.) but when i execute the ko88 for the particular process order systme is not settling any but instead giving me a message: "There are no accrued amounts; settlement is not possible."
5.) Could you please advise if I am missing any thing.
Thanks and Regards
RaviHi Ravi,
Please, check if you have run the settlement already for period that you wants to do the settle by path KO88 -> goto -> previous settlement or by extras -> activate flow trace at Ko88 to analysis the problem.
Please, also verify the SAP note 179533. This note has some informations regarding the problem.
Regards,
Paulo -
Internal Order # not settle
Hi,
The Internal order # 10010 has $5000 that did not settle during transaction KO8G.
Why did this order not settle? How can I settle it correctly?
Thank you.Hi
Settle this order from KO88, in test run.. System will show you the error message, if any
Rectity the error and Process KO88 again
Check if the Settlement rule is maintained
Br. Ajay M -
Report on Internal orders not settled
HI All,
I need a report on the open internal orders which are yet to be settled.
Thanks
ZHi,
You can check the following standard report;
S_ALR_87012995 - List: Orders
If any Order shows a balance in the Actual column that means either it is not settled or there are still balances which can be settled. A zero in Actual means that the order is fully settled for the reporting period.
Thanks, -
How to avoid freight charge in sales order and not to invoice with frieght?
Hi Experts.
The customer group 5 indicates that the customer does not pay freight - ZLF5 condition, but still the freight is invoiced.
Here i don want to invoice the customer with freight charge.
Please advice me regarding this.
Thanks
RaghuDo the analysis of the pricing and check out if the condition record is maintianed for some other key combination(Access). I tihnk it must have maintained.
If the frieght condition needs to be populated based on the customer ggroup. maintain that access/Combination on top so that it gets the highest priority
Rregards
Nithin -
New settlement parameters in sales order does not work
Hi
I have a sales order for service material. It is invoiced. I have to settle it. The existing settlement rule is wrong. So I have created a new allocation structure and changed settlement parameter in the sales order. I save the sales order.
But in VA88 the settlement does not work. I get error message ' receiver cost element not defined and thet cat. PSG not defined.'
But the same allocation structure work good for new sales order.
Pl advise how I can do the settlement for old sales orders, subsequently changed for settlement parameter ie allocation structure.
Thanks
kamalaHello Kamala
Not an expert on this subject, but here is what I suggest, Try and see if it works.
1) Firstly retract the changes you did in sales order and settle first with the wrong settlement parameter (Old data).
2) Now change the existing allocation structure, don't create NEW ONE. If you change an allocation structure, the changes only affect future settlements.
3) Then reverse the settlement.
4) Now re-do the settlement.
Let me know how it goes. Take care. -
Freight Charges in miro wrt Del Note
Hi All,
I have a PO which includes Freight charges and i did the GR & entered the del note #. The acc entries were correct. Now when i do the miro wrt Del note #, I am not able to get the Freight charges, Its showing only material Cost. How can i get both as the Vendor is same for both mat & Freight.
regds,
CBHi,
Please select the planned delivery charges in th MIRO screen drop down(above layout dropdown)
Regards -
Freight Charges from PO into MIRO is not getting copied.
Hi Experts,
Please see the document flow and the issue below.
PO -> MIRO -> MIGO
Here, I have entered freight charges manually in PO, when use the reference to create MIRO.. the freight charges are not getting copied from PO into MIRO.
Why set of configuration I have to perform to solve this?Hi,
Open you condition type in tcode M/06 which you have created for freight and check the settings as below..
in control data 1-
Cond. class-A(Discount or surcharge)
Calculat.type-A(Percentage)
Cond.category-B(Delivery costs)
Plus/minus-A(Positive)
Check the Accrual Key.
Check whether Accrual key is provided in your pricing procedure for your freight condition.
In PO select your freight condition from conditions tab and click on detailed tab there provide your freight vendor in the same screen you can view the condition value which then flows to your MIRO when posting delivery charges.
While doing MIRO for posting delivery charges select planned delivery charges.
Thanks -
Freight Charges does not correctly show Tax % / calaculate
Hi
When I try to add freight charges to an A/P invoice the tax group shows correctly (V1) but the Tax % shows 0.0 instead of 7.5 on every row/type of freight and therefore the Tax is not calculated automatically.
Somebody an idea whats wrong?
Thanks
FranzProblem solved.
As a difference to all the other modules, A/P Invoice does not have the current day as default posting date (maybe this a bug). Since the Tax calculation needs the posting date, it does not correctly show the Tax on the main form as well as on the freight dialog, it shows the correct code, but always with 0%.
So, for correct tax calculation, always make sure the posting date is entered before.
@SAP: Change the behavior with the default posting date, as it is in all other modules.
Best regards,
Franz -
Freight charges should not add to Material Cost
Dear All,
We are maintaining the Freight Charges condition in Pricing Procedure for Stock Transport Order process, as per SAP standard the Freight charges will add to the Material Cost for receiving Plant. But we dont want to add the Freight Charges for Material Cost.
Please let me know how to avoid the Freight Charges adding to the Material Cost.
Thanks & regards,
DhanuDear Dhanu,
Add the condition type at header. So it will not be distributed among individual line items.
I hope this will help you.
Regards,
Ganesh -
Production order not settle correctly
Hello Guru,
PO70 in the closing steps showing the balance of production jobs that settled in the current month. Normally the account holds hundreds of records for thousands of dollars. February close had approximately 10 records for $.05.
1. How Can I check to make sure the settlement is working properly into account 5049000 which is Production Variance Clearing Account?
2. We had 5000 production orders settled in September, 2013 and only 1500 settle in February, 2014. What could have caused this? How can I reslove and go about this issue?
Thank you.Hi Adelkunle
While running variance cycle or settling the production orders, are you getting any error messages. Check the logs.
Also from business point of view and also based on status of the active production orders, it is quite possible to have low number of production orders settling to variances, in the current period. I do not see any technical issues in this, unless I have no complete understanding of your issue, in which case, I wish if you can please elaborate more on the issue, on technical side.
Regards
Mustafa -
A report which displaies orders discerning SETTLED/NOT SETTLED
Hi All,
Could anyone show me a report which displaies the orders (and type orders) discerning between the orders settled and the ones not settled?
Thanks
GandalfYou can try using KOC4 . This is not exactly which are you are looking for ,but this report definately is helpful for your analysis whethere the cost has been settled or not .
regards
Ranjan -
Maintenance Order is not settling
Hi Seniors - While settling the maintenance order, error is coming "Settlement rule is not distributed". Its working for some order types and for some its not working.
Kindly assist me in finding the right node where these settings are maintained. I am unable to figure out...
Thanks & Regards
Manmohan K BajajHi
Are there more than 2 settlement receivers in the settlement rule?
if yes, you need to maintain a % allocation between the two
Regards
Ajay M -
Cost not settled to AUC in last fiscal year
Dear SAP Gurus,
We have some WBSE's for which cost is not settled to AUC in last fiscal year. Now while moving the cost from that WBSE's AUC in Current fiscal year , SAP is not allowing us.
So what will be method to settle the cost from those WBSE's to AUC ?
Thanks & Regards,
Pradipwhat type settlement you are processing. whether it is a periodic or full settlement.
If you are settling the WBSE to AUC with the periodic settlement refer to the OSS note 425601.
Regards,
Maybe you are looking for
-
View Criteria in ADF Query Panel with Table-Class Cast Exception
Hi, I am getting Class Cast Exception when using view criteria for ADF Query Panel with Table. The version I am using is 11g Release 1(11.1.1.2.0) Here is what I did: 1. created a view criteria on a view object 2. all are optional 3. all are Strings
-
hello, i'm stuck with a stupid prob. i initialize my table with some number of row and cols. but after user finishes their drwaings i would to update my table GUI depending upon no of node they'll draw. and also i want to update the row contents dyna
-
"ORA-00054 Resource Busy Error" when running SQL*Loader in Parallel
Hi all, Please help me on an issue. We are using Datastage which uses sql*loader to load data into an Oracle Table. SQL*Loader invokes 8 parallel sessions for insert on the table. When doing so, we are facing the following error intermittently: SQL*L
-
Where is the location of Adobe Connect server?
Where is the location of Adobe Connect Server? At the moment we are experiencing too much delay. It seems that Adobe connect server is not around Korea ,Japan nor China. That's just my guess. Is there any specialist who can give me the right answer f
-
Configuration error message....
Greetings! Recently purchased a refurbished 17" MacBook Pro - complete with 2.16GHz Intel Core Duo. Got all settled in, loaded up Final Cut Pro 4.0, clicked it and got the following message: "Configuration error: This software requires certain hardwa