Settlement on tooling with AIAB

Hello,
I have an error when I run a settlement on tooling FXA with transaction AIAB
The error detail is the following: what can be the reason ?
Receiver categ. FXA is not allowed by settlement prof. NS for this sender
Message no. KD031
Diagnosis
The settlement profile specifies which receiver categories you can settle a sender to. Receiver category FXA is not allowed by settlement profile NS for this sender.
Procedure
You can do the following:
Assign a settlement profile to the sender, that implements the required receiver category FXA.
Choose "Goto -> Settlement Parameters".
Specify another receiver for distribution rule 000. If you already used this rule for a previous settlement, enter a valid-to period. Then enter a new rule for the next settlement with a receiver category. This category must be one that is allowed by settlement profile NS.
Procedure for System Administration
If necessary, maintain a suitable settlement profile.

Hi ,
Please go the transaction OKO7 . For the settlement profile "NS".. valid received .. fixed asset is not allowed.
Please use other settlement profile or correct the existing profile..
Regards
Sarada

Similar Messages

  • What are the IEDriver version requirements for using Microsoft Webdriver tool with a selenium based test tool?

    Hi,
    We are using IEDriver 2.44.0 with microsoft webdriver tool Windows7-KB2990999-x64.msu update with IE11.
    Using IMPLEMENTATION=VENDOR, we are not able to get this IEDriver version working with out selenium based test tool, with or without microsoft webdriver tool.
    I can see the driver IMPLEMENTATION set to VENDOR in the log, it also brings up the browser, but gets stuck there.Is this a known issue?ThanksTanvi

    Selenium is a third party software, so it is not supported in MSDN forum. It would be better consult to selenium's office website or forum. Some placa like here:
    http://www.seleniumhq.org/support/
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Update on tooling with Java ME Embedded 8.1 Developer Preview

    If you are having problems with connecting via USB or with static IP addresses, please see:
    Update on tooling with Java ME Embedded 8.1 Developer Preview
    Best,
    -- Terrence

    Hello,
    I am just viewing this course now and am stuck on finding the raspberry pi 8.1 EA binary:
    oracle-jmee-8-1-ea-raspberrypi-linux-bin-b01-20_may_2014.zip
    The only thing I can find on this page (which is what the document your link brings up has)
    http://www.oracle.com/technetwork/java/embedded/javame/embed-me/downloads/index.html
    is 8.0:
    oracle-jmee-8-0-rr-raspberrypi-linux-bin.zip
    Please help...
    Thanks

  • How can I use Pro Tools with Fire Wire interface and Fire Wire external HD

    If Mac Book Pro has only one Fire Wire jack and I want to use Pro Tools with an M Audio 1814 Firewire interface and an external Fire Wire HD how do I get around the fact that the Mac Book Pro has only one fire wire jack?
    Pro Tools says that they DO NOT recommend using USB 2 Hard Drives as recording drives.
    If I plug my External HD into the back of the 1814 it is way too slow to use, plus, I don't know why, Pro Tools is telling me that my External HD is "not a valid audio volume". It is a MAC OS Extended (Journaled) external Firewire HD (G-TECH G-DRIVE)
    Stuck...
    Message was edited by: Mezcla

    You could consider getting a firewire hub or get an expresscard 34 adapter with a firewire port.
    I personally use a Belkin Expresscard adapter that gives me an extra firewire port as well as two extra USB 2.0 ports.
    Good luck.

  • Using perspective tool with text in AI CS5

    Hi,
    I am new to AI CS5 and was wondering if someone could please tell me how to use the Perspective tool with text?  Also, does the text have to be expanded in order to use the perspective tool or is that not recommended? 
    Thank you,
    Diane

    Hi Diane,
    Here's a video showing how to do it http://vector.tutsplus.com/tutorials/tools-tips/quick-tip-put-text-into-perspective-using- illustrator-cs5/
    For more, please refer to the Illustrator CS5 help docs on Perspective drawing.

  • Use the "Rectangular Marquee Tool" with my mouse

    Hey.
    When I use the "Rectangular Marquee Tool" with my mouse, it is often difficult to do it accurately.
    Is there an easier way to do it than with the mouse, -  can I manually enter the size of my selection ..
    Any advice is welcome.

  • Using AutomatedTesting tools with Livecycle

    Hi All,
    I wanted to know the possiblity of using automated testing tools with LivecycleES Workflows.
    Does livecycle support integration with RFT or any other testing tools.Any pointers will be highly appreciated.
    Thanks ,
    Leena

    I did find out that Cinema Tools doesn't support 2 perf at all, which brings up a whole new question of workflow. Hmm...

  • Need connectivity of SAP Oracle with Third Party tool with dsn

    Hi Friends,
    We need to access SAP's Oracle database with third party tool with the help of dsn creation. For that we need to create 2 staging tables and need a new segment for these tables. Our data will move from SAP transactions to these 2 tables and we want to fetch this data via dsn into another third party S/W.
    I am unaware of such kind of working, can you please help me how to create new segment and how to create dsn for accessing tables in this segment.
    Our requirement is as follow.
    The staging tables are required in the SAP database with user name and password. The user should have all access to the staging table only.
    Requesting your kind help on this issue. Please suggest for further processing of activity.
    Rgds, Krishan Raheja.

    Hi,
    Common way to integrate SAP (database) with third party Application is to use and implement SAP Connector (Java or .Net).
    Using this, you can fetch the data from SAP database to use it in Third party application.
    As per my understanding the method you mentioned, will void the SAP database license term.
    So Please check before doing such configuraiton. Also that method is NOT recommended..
    Regards.
    Rajesh Narkhede

  • Subincacl tool with netapp cifs migration to new domain

    Hello
    I have DomainA (old) DomainB (new).  i am migrating services from DomainA. to DomainB.  i have a netapp filer running CIfS in DomainA.  i have two way trust between two doamins.  All the security groups have been migrated from DomainA
    to DomainB with sid history via Quest tool .  now i need to repermission ntfs on all the shares with DomainB.   I tried usign subinacl tool with following syntax without success
    subinacl /outputlog=c:\output.txt /errorlog=c:\error.txt /subdirectories Z:* /migratedomain=domainA=DomainB=MAPFILE.TXT
    where mapfile has a a mapping of between groups of DomainA and DomainB,  Z is mapped drive to netapp cifs volume
    but it errored out with following
    Last Syntax Error:WARNING : /migratedomain=DomainA=DomainB=mapfile.txt : Invalid option : Z:\*

    Hi,
    Do you run the command from an elevated command prompt? Verify you have proper permission for the mapped drive. Please use the following version of SubInACL.
    http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=23510
    For domain migration:
    SubinAcl /noverbose /subdirectories x:\*.* /changedomain=DomainA=DomainB
    For server migration:
    SubinAcl /subdirectories \\Destserver\Share\*.* /migratedomain=SourceServer=DestServer
    Best Regards,
    Aiden
    Aiden Cao
    TechNet Community Support

  • Oracle 9iAS administration tool with GUI??

    Hello,
    Has Oracle9iAS an administration tool with a GUI (web tool or similar...)??
    I found some console commands to start/stop and deploy some EJB but it's too bored.
    If this tool exists, please tell me how can I access to it.
    Thanx in advance.
    Byeee

    In Oracle9iAS Release 2, V902, the web based EM tool provides the entier OC4J administration capabilities including application deployment.
    Regards
    Pavna Jain
    Oracle9iAS Product Management

  • Photoshop Elements 6 Clone Stamp Tool with Overlay

    Does anyone know how to use the clone stamp tool with the (new) overlay feature in PSE6 to clone whole objects? How do you show the overlay?
    (Or, send me to a free tutorial on it.)
    Thanks,
    Stuart Klein

    I suggest that you look on
    http://www.photoshopelementsuser.com/learningcenter/
    it has a tutorial on the v6 clone overlay

  • Is there a way to use eraser tool with soft edges?

    Hi,
    I am wanting to erase the edges of a rectangular object so that it blends better with the background, and am wondering if there is a way of doing this using the eraser tool with soft edges?
    Here is a snapshot to illustrate further what I mean:
    You should be able to see that above the curve on the left there is a gradient which extends to the top of the image. This is the rectangle which I have applied a gradient to. At the top of the rectangle the colour is the same as the background. What I am trying to do is to blend the left edge of the rectangle in with the background above the curve (below the curve there is a line so no blending is needed). The way I thought of doing this is using the eraser tool with a soft edge. I can do this in Photoshop, but I'm not sure if this is possible or the best approach in Illustrator.
    I would be grateful for any advice on this,
    Thanks,
    Nick

    I don't really understand yoru end goal. However, the answer to yoru Eraser Tool question is no. There is no such thing as a "soft edge" for the eraser tool.
    The ways to blend objects in specific areas only would be:
    Gradients with transparent stop
    Gradient mesh with transparency nodes
    Opacity masks
    Fake it by blending to the same color as the background.

  • Bug in Crop tool with Olympus E-M5 raw files (ORF)

    There is a bug in the crop tool with Olympus OM-D E-M5 RAW files (ORF) that is still not fixed with the recent update.  Here is how to reproduce the problem.
    I setup my E-M5 camera picture aspect ratio to 3:2 (instead of the sensor 4:3) and file format to RAW.
    I take a picture.
    I import the picture in Lightroom.  The first thumbnail I see is the full sensor, then Lightroom computes a new thumbnail and correctly display the 3:2 crop factor.
    I select the picture in the library and press [R] to bring the Crop tool.
    BUG: The Crop tool does not let me recover the full 4:3 sensor image and is locked to the 3:2 crop factor.
    Can this be fixed?  Thanks

    Are you sure you mean Photoshop version 6 the is a very old version of Photoshop before ACR existed. ACR first became available as a extra cost plug-in for Photoshop version 7.  ACR started to be shipped with Photoshop with  Photoshop CS. Each version since Photoshop CS has a newer version of ACR which is not compatible with older versions of Photoshop. So
    CS ACR version is 2.4
    CS2 ACR version 3.7
    CS3 ACR version 4.6
    CS4  ACR version 5.7
    CS5 ACR version 6.7
    CS6 and CC ACR version 8.4 however the new features in ACR 8.4 for CC are crippled in CS6. CS6 just get the new Camera support.
    http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
    If you have CS6 use menu help>Updates it should find the ACR 8.4 for CS6 and update your installation. If it does not you can down load it and the DNG converter.  However don't convert to DNG just use your OFR RAW files.
    http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html
    If you do mean Photoshop version 6 you need to see if Olympus  has a RAW converter for Photoshop version 6 for your camera.

  • Anybody used PlateSpin or other V2V migration tool with Oracle VM?

    We're actually trying to migrate a few XenServer guests over to Oracle VM, but would like a more comprehensive package. One that keeps coming up is PlateSpin, although I'm by no means glued to it as a solution. Ideally, this would be a reasonably flexible tool with p2v, v2v, and v2p. Our environment is currently Xen only (Citrix and Oracle).

    886374 wrote:
    In playing with OVM 3.0 so far, I see that local storage (as the accelerator cards would show up as) is not really appropriate for Production Systems. It appears I can create a Repository on these physical disks and then present them to the VM guest. Then add these cards as my Oracle ASM disks for my "fast" storage, and do the same with the FiberChannel storage for my "slower" disks. Because of the Local Storage used for part of the VM guest, we would not be able to Live Migrate or have High availability I believe. Is this correct? Correct.
    If we have the two servers as mentioned above. Could I take the database VM down and move it to the other server (ie Cold Migration)? The local storage (ie the accelerator cards) could physically be moved from one physical host to the other, but I am not sure, since this is virtualized disk, if this would be allowed or how it could be recognized on the other Oracle VM Server. This might be a "dream", but might be something we would like to do if an emergency arose or if more maintenance needed to be done on Server 1. Any comments?You would have to shutdown the VM, migrate it to an unassigned folder, edit the VM, remove the local storage from Server 1, migrate to Server 2 and add the local storage from Server 2. Whether or not this means moving your hardware is up to you.
    Does anyone have other solutions to run Solid State disks (approximately 2TB worth) and Oracle VM, running a single guest that runs the database? We have been unable to find iSCSI or FiberChannel enclosures that can handle solid state drives in the 1 to 2 TB range of capacity. So perhaps there are other enclosures out there that can act as Shared Storage that can operate with SSDs. Thank you for any comments and suggestions.I know the Sun storage appliances use hybrid storage, i.e. a mix of SSD/spinning disks, but I don't know the details. Our Exadata machines have 5TB of Flash storage per cell, so I know we have such options.

  • How can I settle invoicing plan with defining withholding TAX Parameter

    Dear All
             Please kindly help me to answer this question, How can I settle invoicing plan with defining withholding TAX Parameter.
    I've already create PO Framework Order by specify Invoicing Plan Periodic automatic settlement.
            But, We can found with holding  tax parameter on the tab of invoicing plan in PO.
           Please help me.

    Hi,
    From my understandinging in case of withholding tax there is no provision to manage from procurement side.
    At the time of MIRO or payment run users have to select the applicable      
    withholding tax code ( During MIRO withholding tax pop up will appear).  
    Withholding tax is a component within FI: FI-AP-AP-Q  
    Regards,
    Edit

Maybe you are looking for