Settlement Rule for Internal Order

Hi All
I have Maintained Settlement rule for Internal order as under
CAT - FXA
Settlement Receiver - Asset
% - 100
Settlement type - Full
Now after settlement of above Order in KO88 . I want again use above internal order. Hence i have trying to put Settlement rule 50% for some anther asset but system gave me following error. Please guide on this issue.
Total = 50.00%, ( Set.Type PER / Version / Actual settlement ), period 010/2011
Message no. KD042
Diagnosis
You have entered distribution rules which settle 50.00% in total. This applies for settlement view ( Set.Type PER / Version / Actual settlement ) in period 010/2011.
When checking the percentage total, the system found one of the following errors:
The total percentage for the distribution rules is more than 100%
The total percentage for the distribution rules is less than 100% and this is a rule for full settlement.
The total percentage for the distribution rules is less than 100% and the 100% check is switched on in the settlement profile.

Hi:
        Please refer to the contents of OSS Note 45612 - IM: pre-settlement does not work, or KD042... which states
"Symptom
    1. If a preliminary settlement rule (for example, to cost center) is entered for individual items of capital investment measures with line item management, this rule is not considered during periodic settlement. There is no settlement to cost centers.
    2. If you enter a final settlement rule for individual line items of investment measures with line item management for a partial capitalization (that is, the percentage rate is less than 100%), then you receive the unjustified error message KD042 "Total percent = xx%".
Additional key words
KOB5, CJ70, CJ88, CJ8G, KO88, KO8G, preliminary settlement, partial settlement, partial capitalization
Cause and prerequisites
    1. You did not enter the settlement type ACT in the preliminary settlement rule.
    You can check this in the Line Item Apportionment transaction by choosing the menu option "Goto" -> "Overview dist. rules" to display the distribution rule groups entered so far.
    The system displays rules which have no entry in the "SetTyp" field (settlement type, field name PERBZ).
    2. The check of the percentages is incorrect.
Solution
    1. Install the following correction. Afterwards reverse the incorrect settlement, re-enter the preliminary settlement rule and settle again.
    2. Install the following correction. Afterwards, you can maintain the settlement rule for the partial settlement.
    Note: If you want to use a default settlement rule (maintaining the settlement rule from the master data maintenance transaction), then you are required to distribute the line items at 100%. In order to carry out a partial capitalization (settlement of less than 100%), you have to use menu path "Actual postings -> Period-end closing -> Settlement -> Line item "
Regards

Similar Messages

  • Plan settlement rules for internal orders

    Hi all,
            I am having a problem in setting up plan settlement rules for the internal orders. I have created a order and tried to set up a plan settlement rule. I am trying to settle the order to a Profitability segment PSG category. Everything is fine until here. Then when I am trying to change the profit center in the Profitability segment it is greyed out. I am unable to change it. This is not the case with actual settlement. In actual settlement you can change the profit center in the settlement rule but not in case of plan settlement. Can someone please help me in this. I need to change the profit center in the plan settlement rule. This is very urgent.
    Many thanks,
    Sarada

    Hi,
    Please check if it has any planned values already posted on this order already.  In this case, unless these values are settled it will not allow you to change the profit center.
    Also, the reason for the allowing a change of profit center in actual settlement rule might be that there are no actual values posted in the order.
    Good luck!!!
    Thanks and Regards,
    Bhuvaneswari.S

  • Create new settlement rule for an order with a function module

    Hi,
    I would like to create a settlement rule for an order. I searched for existing function modules and found K_ORDER_SETTLEMENT_RULE, which seems to be the correct one.
    The problem: The settlement rules, which I create with this function module are not saved.
    Do I have to call another function module to save my new rules?
    Thanks in advance,
    Fabian

    Hi,
    Settlement rules are first of all defined in customizing how the should be behave and secondly lies the question how to update a CO cost object with this settlement rule.
    My first advice would be to use the "automatic settlement derivation feature" that can be setup in customizing alike. <b>SPRO -> Controlling -> Internal Orders -> Actual Postings -> Settlement -> Automatic generation of Settlement Rule</b>. Read the docu for this node (right click and choose Display documentation) to understand what possibilities and limitations this functionality has. Below this node you have the possibility to define a "settlement strategy" and allocate this to a order type. You can also define a Enhamcement (COOM0003
    ) where you can somewhat influence the automatic generation of settlement rules.
    Execute transaction KO8G (collective processing) or KO88 (indicidual processing) to create a settlement rule for internal orders.
    The other option you have is to create a custom program based on BDC to create settlement rule for internal orders.
    I think the BDC program would be a better idea for you.
    Let me know if you have any question.
    Regards,
    RS

  • Settlement rules for CO Orders

    Hi Guru, need your help to set up new settlement rules for CO Orders, to different plan versions. Can this be done in a massive way?

    Hi...
    Firstable, you have to create all plan version in the Controlling area, and activate the CO integration planning.
    You can create many settlement rules for each plan version but individually on the transaction KO02 -> Settlement Rule -> New rule...
    If you want to creat it automatically, maybe you can try to create a LSMW for this transaction. There are masive modification for other field to internal orders (Transactions KOK2 and KOK4)
    Regards,
    Karim

  • Error-M2O-Settlement rule for assembly order for item...could not be genera

    Hi,
    When I am creating Sales Order (VA01) for M2O, I am able to do the costing and copy the EK02 condition type. I have verified the the incompletion log, it indicates that document is complete.
    But while saving the sales order, the below error message is displaed:
    Settlement rule for assembly order for item 000010 could not be generated. Should the order still be saved?
                    Yes/No
    1. If No is choosen the following error message is displayed
           Error when processing Production order
          Error when processing Production order
          Message no. V1380
          Diagnosis
            A technical error has occurred. On calling up the assembly interface, exception 5 was triggered. The exceptions have the  following meanings:
    1 = External block,  2 = General error,  3 = Insufficient data for the interface,  4 = Order was not found, 5 = Update has been rejected, 6 = Final document number for Production order is not issued.  Procedure: Inform your system administrator.
    2. If Yes is choosen, it is creating Production Order without settlement rule. Able to perform GI & Gr. If I try to enter settelement rule (Settlement receiver SDI - Sales document item) in production order (CO02), the belwo error message is displayed
    "Distribution rule for Sales document item can only be created automatically Message no. KD063"
    We are using the requierement class with below details:
    Reqmts class: ZSO- for M2O
    AAC = E, Valuation = A, Settlement profile =SD1, RAKey = 000004, Assembly type = 3.
    Settlement profile contain:
    Allocation structure, PA structure, Default object type = SDI. Valid receivers: Optional -Sales Order / Prof. seg.
    If I make the Valuation field as blank in Reqmts class, there is no error while creating Sales order. And also Settelemnt rule with sales document item as receiver is successfully creating for the production order. Since the Valuation is blank in requirement class, it is Non valuated Sales order stock. All GIs & GR are non valuated
    The business requirement is it should be valuated sales order stock and the production varinaces has to be settled to Sales order. Then Sales order has to be settled to COPA.
    Need your valuable inputs to meet this requirement.
    Let me know if you need any further details.
    Thanks in advance.
    Regards,
    ADI

    Dear SAP PP Consultant ,
    What is the strategy group you are maintained in the material master ?

  • SETTLEMENT RULE FOR AN ORDER

    How will i know settlement rule for an order is created and assigned to an order type?

    Hi
    If you create an order then the order status will show you whethe settlement rule is created or not the status is SETC, this means settlement rule is created,
    based on the settlement profile assgined to the order in OPJH settlement rule is created.
    BR
    SK

  • Automatic Generation of Settlement Rules for PM order

    Hi All,
    I am doing a maintenance orders settlement and I have the fallowing issue:
    My client has 2 types of equipment, namely vehicles and industrial equipment. Both have particular rules.
    For vehicles, we need to control all cost by an internal order
    Industrial equipment costs will be control by cost center.
    So, cost center is maintained for industrial equipment, and Settlement Order for vehicle equipment.
    I have a unique order type for which in Settlement profile I have entered Order and Cost Center as 'Settlement Optional' and default object type as CTR.
    When I create a PM order for vehicle, system cannot generate automatically the settlement rule, because in order type I have entered default object type as CTR and in equipment I just have the Settlement Order.
    But if I create a PM order for industrial equipment system create automatically the settlement rule, because cost center is maintained for industrial equipment and order type has default object type as CTR.
    In the allocation structure I have a receiver category for CTR and ORD.
    So, Could you help me how to generate automatically settlement rule for both cases without 2 order types?
    Thanks & regards,
    Hélder Nunes

    hi
    i think it is not possible to generate settlement rule based on equipment ,if you have specified the default settlement category in IMG ,it will be generated .
    check with your technical team whether user exit IWO10027 can be mapped
    regards
    thyagarajan

  • Copying Settlement Rules of internal Orders

    Hi everyone,
    i have all internal orders that already have settlement rules for the verion 000 actual.
    Now i want to copy the rules to two different plan versions, i don't want to change
    anything, i just want to copy them to  from actual version 000 to two others planning versions.
    I checkeg function group SAPLKOBS, but didn't find anything helpful.
    If i do it with the transaction KO02, adding the rules by changing the master data of the order,
    it looks as if i only have to create a new entry in COBRB, because COBRA is already existing.
    Any ideas ?
    Kind regards
    Henner

    Hi Marcin,
    Great day!
    If the reason of changing the settlement rule is you have to correct the previous one and that there has been a settlement before, then you can no longer change it. All you have to do is to double-click that settlement rule then fill-out the field - "valid to." Then create another one or a correct one.
    You may use the following BAPI/Function Module to update your settlement rule via the interface:
    K_SETTLEMENT_RULES_UPDATE
    Hope this helps.
    Thanks!

  • Settlement Rules for PP Orders - Need a user exit?

    Hello,
        We have a PP Order Type (ZSVL) that requires a sales order to create. SAP then defaults in a settlement rule with 100% to the MAT. We want to default in or alter via user exit a settlement rule with 100% to a specific fixed cost center. We cannot get SAP to default it in. We have not found a user exit that will let us alter this settlement rule, either at PP Order save or during settlement. If we can't do this then the user is forced to manually change the rule for every order entered and we want to avoid this, if possible.
    Any suggestions?
    Ideas tried already:
    PP Order exits and BADIs do not include Settlement Rules in their interfaces.
    IWO0027 settlement exit is for internal orders and does not work on PP orders
    K_SETTLEMENT_1 has limited fields to change.
    [Picasa Photos of Settlement Rule|http://picasaweb.google.com/johnnorman/SAPSettlementRule?feat=email#]
    [Alternate Link to Picasa Photos|http://picasaweb.google.com/lh/sredir?uname=johnnorman&target=ALBUM&id=5371036612659624289&authkey=Gv1sRgCNio0I2O376a_gE&feat=email]
    This is SAP 4.7 patch level 19...  behind but upgrade to 6.0 is next year...
    Thank you for your help and any ideas in advance!

    Hi,
    PP Orders should always be settled to the Material and thats the standard SAP design. From the settlement rule it is clear that you have created a Cost Center called Production Variance and the settlement is pointed to that Cost Center.
    A better design / approach would be to settle the PP Orders to MAT. And Month-End Variance calculation will categorize the variances and push to CO-PA. Variances reports could help in gathering the information regarding the variance categories and the amount of variances. (If that is the only purpose why you are settling to CTR). Currently, since you are settling the variances to the CTR, how the Cost Center is getting cleared / zeroed?
    The existing approach can be re-visited and business requirements can be analyzed to see how that can be met through what SAP delivers.
    Thanks,

  • Settlement Rules for Rework Orders

    hey Gurus,
    We have set up a different production order type for Rework Production Orders, ZP03.  We are manually assigned a work center that has a cost center and cost activity associated for cost accounting.
    When I create this order,  a screen always pops up asking to populate the settlement rule for this production order.  I have been blasting through this. We are confirming the order and checking the costing associated with this order and it seems to be populating the cost correctly when we check either the itemized costing in the production order or KOB1.
    I know that I am missing something here but the system seems to be behaving well without the settlement rule being populated for this order type.
    What is the fault in my thinking by not populating this rule for this production order type and what do I need to do to populate this settlement rule correctly?

    Hi,
    Create order with CO07and asssign then go to Header and under Settlement rule assign the production order with that rework order.the settlement receiver as orginal production order at settlement rule.
    Please check the settlment profile in OPJH and settlment profile in OPKT and OK07. Standard order type for rework we use PP003.
    Regards,
    R.Brahmankar

  • Settlement Rule on Internal Orders

    We have had a request to default in the same asset number for all fixed asset internal orders.  Is this possible?

    Hi
    See if you can use exit COOM0003 for auto creation of settlement rules.. Here you can write your own logic
    br, Ajay M

  • Settlement Profile for Internal Order

    Dear Gurus
    What is a settlement profile for a internal order?
    Regards
    Kailash

    Hi Kailash,
    Settlement Profile is where you configure all the parameters to be considered and settlement to take place according to the.
    Main components of Settlement Profile are...
    1. Whether cost posted to Internal Order should be settled / should not be settled ( to the settlement receiver object)
    2. Allocation Structre, in which you give the source cost elements and receiver category and settlement cost element
    3. If more than one settlement receiver is given in the settlement rule of the Internal Order, on what proportion the cost has to be settled among them,
    4. What are the valid receivers to which the Internal Order can be settled etc...
    We create Settlement Profile and assign it in the Internal Order Type.
    For all the Internal Orders created using that Order Type, all the settlement parameters given in the Settlement Profile will be applied.
    Pls revert back if further explanation requried...
    Srikanth Munnaluri

  • Settlement rule in internal order & trading partner

    Hi everybody,
    i have a big problem that i can't understand. I'll explain:
    I have done a settlement rule TO CO-PA for an internal order.
    This settlement seems work well because in CO PA i find all my records, but i have seen that one information is missing.
    This information is the TRADING PARTNER.
    Someone have told me  that the settlement rule doesn't report this information to CO-PA. It's true or not?
    If someone can help me i'll give you great point, because for my society is a big problems!!
    Thanks a lot.

    No, thanks it doesn't help me.
    I haven't to settled cost to a fixed asset (FI-AA) but i have to settle cost to a profitability segment (CO-PA).
    Best regards

  • Auto generation of settlement rule for PM orders that are Investment Measur

    Hi all
    Has anyone successfully automatically generated settlement rules on a PM order that is an Investment measure? The settlement receiver would be an asset. User exit IWO10027 doesn't work. Std settings don't work either because a settlement rule is auto generated for the AUC on the order during settlement (Note 195607) because of IM.
    Any ideas?
    Thanks
    CC

    for a PM order as investm,ent measure the system assumes that you wish to create an AuC hence no other settlement rule generation is allowed
    you can try by removing the asset class in the IM profile

  • Automatic Creation of Settlement Rule for Maintenance Order

    Hi,
    While doing TECO for Maintenance Order, its asking for Settlement Rule. IF I click settlement rule, message is coming as Maintain Settlement Profile with options like With Default, Without Default & Cancel.
    I have maintained the Cost center in Equipment Master. Also I maintained Cost Center as Default Settlement receiver.
    Also I have gone through setting in Automatic Creation of Settlement Rule under Controlling Category.
    But I couldnt understand that. Can you please tell what are the steps to be done?
    Regards,
    Maheswaran.

    Hi,
    Please check the indicatorsin Actual cost/cost sales  and Valid recevivers in settlement profile.
    If for cost center : 1 settlement optional is maintained in valid recevivers and also for order
    and in actual cost/ cost sales: indicator to be settled in full is selected.
    Also check Allocation structure too if you have assigned the valid allocation structure.
    **check if you have assigned the valid settlement profile to order types.
    *****Most important after doing all these settings you need to create new order. for same order you will not get the automatic settlement rule
    Hope this helps.
    Regards,
    PMAddi

Maybe you are looking for