Settting Up Time Capsule to Access NAS Device Via FTP

Have had problems accessing my NAS via FTP when trying to connect to it from an outside network. Have never been able to access and login either anonymously or using one of the user names and passwords that I have set up from outside the home. When at home I am able to connect to the NAS via FTP on the LAN no problem so I am almost positive that I have not properly set up the Time Capsule.
My NAS also uses a web server feature that I am able to use by forwarding the proper ports on the Time CApsule and setting up a DynDNS account.
I would just use the web server feature but it's limited to accessing files under 2TB.
Would GREATLY APPRECIATE any advice on how to solve this problem.

charliprkr wrote:
Have had problems accessing my NAS via FTP when trying to connect to it from an outside network.
Welcome to Apple's discussion groups.
It sounds like you need to configure your Time Capsule to do "port mapping" of FTP ports to your NAS. In AirPort Utility enter "manual setup" mode with the Time Capsule, then select the Advanced panel and the Port Mapping tab. Click the plus sign at the bottom, then choose "FTP Access" as the service. Supply the LAN IP address of your NAS. Now direct your FTP requests to the WAN address of the Time Capsule.

Similar Messages

I receive a not connected to the internet message several times daily on my iMac connected via airport to a time capsule which accesses the internet via cable modem.. When I input my password to enter network preferences, the connection re-establishes.

I receive a "not connected to the internet message" several times daily on my iMac connected via airport to a time capsule which accesses the internet via a cable modem. Software/firmware is up to date on the iMac (OSX 10.6.8) and Tme Capsule(7.5.2). Browser is Safari 5.1.
When I input my password at the prompt to enter network preferences, all the lights go green (ie... ethernet, ISP etc.) and the connection re-establishes immediately and states "the connection appears to be working normally".
It more of a nuisance than anything and seems to have started ocurring over the past couple of months. I also have a windows XP box also connected to the same cable modem that I never have internet connectivity issues with. I've verified all the physical aspects of the connections and can't see any evidence of any actual drops in the modem logs. I suspect it is just an intermittent communication loss between the Imac and the Time Capsule, but I am not very familiar with Mac equipment yet.
Just wondering if anyone has experienced a similar problem and what you did (if anything) to resolve it?
Thanks.

The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

Time Capsule remote access fails - Device not listed

I've been able to access my 4th generation time capsule hard disk remotely, but my router settings keep getting reset and I need help with my configuration.
Apparently, the router (xDSL Motorola 7647-47-20SC) is dropping my IP Passthrough settings for the time capsule even though it initially accepted them and remote access was verified. Although I've added the time capsule as a new device using its MAC address, after a few minutes the device is no longer listed and my port forwarding and IP Passthrough settings are lost.
Here's my setup:
xDSL modem configured in DHCP mode. The DNS server is configured to be retrieved automatically. The Time Capsule is directly connected to the router via an ethernet cable and has been added as a device using its MAC Address with the router configured to forward both TCP and UDP port 548 to the device. IP Passthrough has also been enabled for the Time Capsule.
Using AirPort Utility the Time Capsule has been set to bridge mode with Back to My Mac enabled. I tried to configure it in NAT and DHCP mode to enable disk sharing over WAN, but either lost my internet connection or got an error message that my internal DHCP addresses conflicted with the router's (even though they didn't).
I have a domain host name via dyndns.org which is updated with my public IP address.
The first time I set up the router and time capsule and entered the "Connect to Server" address afp://xxxx.dyndns.org:548 a pop-up window asked for my user name and password, after which I was able to see the hard disk remotely. But when I tried again this morning there was no connection to the server. So I checked my router settings again when I got home, and the Time Capsule device was no longer listed! I can access the disk in Finder within my home LAN, so it must be identified somewhere, but my original IP Passthrough and port forwarding settings are no longer available since the time capsule has been dropped from the list of available devices.
Can anyone tell me how to restore this configuration and make it stick? Thanks for your help!

Well, I just perused the Swisscom forums and apparently a firmware update initiated remotely a few weeks ago is causing problems with IP Passthrough functionality on the router. Nothing we can do until a bug fix becomes available from out internet provider.

Can time capsule be accessed remotely

Can time capsule be accessed remotely? Via macbook pri on another wifi network

Just google for this one.. there are loads of video on utube etc..
The answer is yes.. but it depends as all things do..
BTMM and iCloud is designed for remote access to TC and Mac.
http://support.apple.com/kb/HT3486
The TC has to be the main router in the network..
The remote network must not block the protocols required for connection..

Backing up a time capsules to a remote device across internet?

Hi
has anyone any experience of backing up the time capsule (backup and NAS) over the Internet to a remote device (either a machine, NAS or another time capsule)?
I'm trying to do a home (cheap) version of colocating the time capsule (primary location my place, secondary location/back up location my parents).
Just wondering if there is any advice since most discussions seem to centre around the archive feature via the USB port which does not help since I need to remember to take it off site!
Any suggestions would be great
Thanks

The only thing I've done with a Time Capsule over the Internet is to copy individual files. It takes a long time. I'd expect an attempt to copy a lot more would take an unacceptably long time.

Can I use time capsule as an NAS devise with sonos, to play music library when iMac is off?

can I use time capsule as an NAS devise with sonos, to play music library when iMac is off?

Apparently Sonos system can play from the library without needing iTunes running.
In that case yes, the library can be played directly from TC.
See https://discussions.apple.com/message/18562619#18562619
Sonos needs fully compliant SMB file system.. this is important.. and not what the Apple system is using to access the TC.
Moving the library has to be done correctly.
See http://support.apple.com/kb/ht4527
There are plenty of discussions in forums and technical sites.. this seems well worth a read.
http://arstechnica.com/apple/2012/12/how-to-offload-your-itunes-library-to-a-nas /
TC is very non-ideal itunes library location.. unlike a real NAS.
Just so you are aware. If you have TM backups on it.. mixing backups and data is not a good idea.
At least consider moving backups to USB drive. You will need the speed of the TC internal drive for using the library though.
TC has no way to back itself up.
TC is slow to start.. you will get errors as the library is not found.
And quick to spin down drives.. it is not designed to stream media.. it is a backup target for TM.

Time capsule only allows 2 devices at a time as a router. If I am using the iphone and macbook pro, it bumps the roku offline. Any suggestions?

time capsule only allows 2 devices at a time as a router. If I am using the iphone and macbook pro, it bumps the roku offline. Any suggestions?

At a guess you have cable internet connection.. please confirm exactly what you have.. two public IPs are allowed by some ISP.. once you use up the two IPs, there are no more..
Make sure the TC is in router mode. And to get it working you probably need to shut off the cable modem.. if it has battery backup remove the battery.. try 5min off .. if not long enough try 20min off. then overnight. The ISP equipment must reset to allow a new MAC address to capture the IP.
If you cannot work it out.. plug in the old router again.. and set the TC to bridge mode.. which I suspect it is in now.. and plug it into the main router.. it should work fine like that.

Hi. My air port is connected and wifi is working but i cannot connect to the time capsule to access any files stored there

Hi. My air port is connected and wifi is working but i cannot connect to the time capsule to access any files stored there

Hi. My air port is connected and wifi is working but i cannot connect to the time capsule to access any files stored there

Can documents saved on my time capsule be accessed if not connected i.e. I am away from home and want to access documents saved on my time capsule

Can documents saved on my time capsule be accessed if not connected i.e. I am away from home and want to access documents saved on my time capsule

Yes, if you setup one of the methods.. see
https://discussions.apple.com/docs/DOC-3413
You must use a Mac for any of those.. if you want to use some other OS tell us.

Can i store my movies on the time capsule and access to watch on my new ipad?

can I store my movies on the time capsule and access wireless to watch on my new ipad?

TC is not a media player.. it has no smarts whatsoever.
If you have an app on the ipad to play files.. then the ipad can play files from anywhere.. even the TC.. but the TC contributes nothing. Do not move your itunes library to the TC.. that is asking for trouble.

Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

How to turn Time Capsule into a cloud device

I want to turn my apple Time Capsule into a cloud device so if I am out of my house I can pull that really important file off my computer. Please Answer!

BTMM and icloud.
http://www.apple.com/au/support/icloud/back-to-my-mac/
http://support.apple.com/kb/ht3486

Time Capsule Remote Access [HELP]

So like the title says I want to have access to my Time Capsule from anywhere.
I'd like someone to post a [HowTo] Step by Step.
I have:
MB Pro with Lion OSX 10.7.4 (Airport Utility 6.1 and 5.6)
TC with FW 7.6.1 (Bridge Mode)
T-Home Speedport W 504V configured as a DSL-Modem
TC is connected to the Speedport.
I've read many things but they make everythin more complicate.
I also tried to activate NAT-PMP with a public IP so that I can Share Disk over WAN, but the program tells me that
DHCP Staraddress and Endaddress are in conflict with my WAN-IP-Address.
So at the moment I'm using the Bridge Mode.
Also iCloud "Back to my Mac" tells me NAT-PMP or UPnP isn't activated on my router.
So please give me some help with this stuff so I can get access from an extern network.
And if I try to do it on Airport Utility 6.1 it tells me Double NAT.
Regards
Khanh Duy

I don't have a howto step by step sorry.. I refuse to use OS with as bad a Networking as Lion.. and no interest in clouds..
You can do this without icloud at all. And it is simple if you have a static public IP address.
Even without static public IP you might do ok with the modem you have.
So let me suggest 3 possibles..
1. If you want to continue down the icloud road.. the issue is upnp .. did you turn on upnp in the modem.. if not do so and try it. TC should be bridged.
Or if you ISP allows pppoe authentication then bridge the modem and use the pppoe client in the TC.. this is a better method as then the TC gets the public IP on its WAN port. You can select to allow disk access from WAN. Although if this is necessary or not from iCloud I have no idea.
2. With a static public ip, simply port forward AFP to the TC ip address. I will not post the details unless you do have a static public IP because most people don't. TC is in bridge.
3. Use dyndns client in the modem.. Here again you will have to check if that facility is in the modem.. again the TC is in bridge.. port forward AFP to the IP of the TC. The router has to control this using a fixed IP to the TC.
In both the case 2 or 3, you access the TC remotely by simply using its IP address or URL. In finder, go, go to server and type in AFP://PublicIPaddress or AFP://TCdyndnsaddress
If you just google for "Time Capsule remote access" there are hundreds and thousands of posts explaining how to do it.. but if you cannot figure out method 2 or 3.. I am happy to give further details.

How do I use time capsule as a storage device so I can free up space on my hard drive

How do I use time capsule as a storage device so I can free up space on my hard drive?

Click here and follow the instructions.
(62135)

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages sometimes. How do I fix?

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages (no connection) sometimes when trying to connect devices to the wireless network. How do I fix? Sometimes devices cannot connect to the network because of conflicting IPs. I look on the Motorola and every device has a unique IP assigned but occasionally a device has taken the IP of another device. I have been writing down all the devices and the IPs they have been using. It happens more with PCs than Macs, ipads or iPhones.

If the Time Capsule is set up correctly in bridge mode, then it is the responsibility of the Motorola modem/router to provide the correct IP address assignments for all devices on the network.
Check to insure that the Time Capsule is correctly set up to operate in bridge mode as follows:
On your Mac, open AirPort Utility
Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Insure that the setting for Router Mode is configured to read "Off (Bridge Mode)"
Once you have confirmed that the Time Capsule is configured correctly, everything else is the responsibility of the Motorola modem/router as far as network routing and IP address assignments for devices.
If you continue to have IP address issues, then you should contact the Internet Service Provider (ISP) that provided the Motorola device to you and ask them to fix the issue.

Settting Up Time Capsule to Access NAS Device Via FTP

Similar Messages

Maybe you are looking for