Setttings and app order lost after reboot

Today, after installing an app on my iPhone, i did the usual turn off then back on. After the phone turned back on, all my apps were in a different order and my settings were reset. Has this happend to anybody before and what is going on? Did I accidently do a hard reset? Thanks for any help.

cellphonedude53105 wrote:
Today, after installing an app on my iPhone, i did the usual turn off then back on. After the phone turned back on, all my apps were in a different order and my settings were reset. Has this happend to anybody before and what is going on? Did I accidently do a hard reset? Thanks for any help.
I have not seen such behavior with any app. Do you know which exact app was that induced such behavior?
1. Try deleting that particular app and reinstalling either over the air or in iTunes and then sync
2. Could be a good idea to sync the phone before installing that particular app so that you can revert to your last backup if anything goes wrong again
3. Hard resetting the phone does not mess up the order of your apps
Hope this helps.

Similar Messages

Apps wont open after reboot and reinstall

apps wont open after reboot and reinstall

yeah that was a bit open wasnt it.. sorry..
i have 10.8.2 mountain lion, just did a reboot and pulled my original user from my back up back into the new system, opened a new user profile that is the same name as the one i had backed up.
now i cant open up anything in Iworks 09... or anything inb microsoft office 2011, plus i can open garage band.... i used time machine retore to retrieve those apps... but they come up with errors
any ideas other than trying to reinstall thses.?

HKLM Permissions lost after reboot

Hello All.
I have a need to give the Everyone group full control over the root HKLM hive of the registry. I have used the RegEdit GUI and the regini command to grant full control to the Everyone group for the HKLM Key and Subkeys. However, once I reboot the workstation,
the permissions have reverted back to the original.
The local administrators group is the owner of the HKLM key, and I am logged in as a member of this group when making the permission changes. I have UAC disabled, and have tried regedt32.exe > Run as Administrator and cmd.exe > Run as Administrator,
and I can set and confirm the permission changes with error, but the changes are lost after reboot. No AV is installed.
Does anyone have any clue what I am missing here?
Thank you in advance!

Hi,
I cannot repro such issue on my computer. This should be something wrong during restarting or the admin account.
If you have any other admin account, please log on with it and try to grant the permission you would like to see what’s going on.
To make sure that other program reset permission during restarting, please test this issue when booting into Safe mode and let me know the results.
If the issue still persists in safe mode, please help to collect the boot trace for further research.
How to collect a good boot trace on Windows 7
http://blogs.technet.com/b/jeff_stokes/archive/2012/09/17/how-to-collect-a-good-boot-trace-on-windows-7.aspx
Once down, please upload the .etl file into SkyDrive or Similar ones and share the public link here for our research.
Keep post.
Kate Li
TechNet Community Support

CF10 App server running after reboot; but website unavailable until service restart

Hello, everyone.
I recently returned to a job I previously had after several months at a different job. Upon my return, I inherited someone else's dev system (my previous dev system, apparently, had been reimaged and given to someone else, after I left.)
This system originally had CF9 server on it (the ColdFusion9 folder is still here) and now has CF10. Using the built-in web server (no IIS, no Apache.)
Every time I boot/reboot the system, I can see in Computer Manage System that CF10 Application Server is, indeed, running. But if I try to open any of the pages that I am working on, I get an error message that the site can't be found.
I go into Computer Manage System, go to Services, right-click the CF10 Application Server, choose "Restart", wait for it to finish, and voila!, I can get a working page.
Does anyone know why this is happening, and/or how to remedy it so that CF will work immediately after boot/reboot without going to restart the service?
Thank you,

Good to hear you solved it. If you may still want to know exactly why that was causing an issue, I would propose something I didn’t yet see anyone else do: look specifically at the CF log called coldfusion-out.log. That is basically the “console log” when you run CF as a service, and it would be interesting to know what was in that log if you compared the startup messages in your working and failing examples.
The log tracks info generally for days if not weeks or months (depending on what else is logged in the file and how quickly it fills), but it may well give you insight into what was up. I’m not saying there WILL be something there. As Anit said, what you experienced was odd, but if there will be something logged anywhere about this, it may be there.
If nothing else, I leave this here for anyone else who has a similar sort of problem in the future.
/charlie
Re: CF10 App server running after reboot; but website unavailable until service restart
created by WolfShade <http://forums.adobe.com/people/WolfShade> in ColdFusion Server Administration - View the full discussion <http://forums.adobe.com/message/6199851#6199851

ITunes settings lost after reboot

I have a problem where after a reboot the settings of iTunes are back to default. For example:
it loses the account for the Store (I have to re-enter email address and password);
it loses the wifi sync settings for my devices
it shows the iTunes tutorials screen, as if I'm starting iTunes for the first time
settings under preferences are lost
Other things are not lost:
the library is still there;
iTunes remembers the devices (when connecting it is handled as a known device) and knows what playlists/apps/.. to sync with it.
Since I'm not rebooting my Windows 7 PC a lot, the problem is not occuring a lot, it doesn't keep me from using iTunes, it is just annoying. Now after rebooting I decided it's enough and I would post the issue (since I can't seem to find a comparable issue).
Also worthwile noticing is that the problem is already there for some time, though I can't exactly pinpoint anymore when it started. Possible when iTunes 9 or 10 were realeased.
Now I'm using:
Windows 7 64-bit (completly up to date)
iTunes 10.5.2.11
Thanks for any help!

Router>sh ver
Cisco IOS Software, 1841 Sofware (C1841-IPBASE-M), Version 12.4(7d), RELEASE SOFTWARE (fc2)
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Router uptime is 34 minutes
System return to ROM by power-on
System image file is "flash:c1841-ipbase-mz.124-7d.bin"
Cisco 1841 (revision 7.0) with 114688/16374K bytes of memory.
Processor board ID FCZ1251943K
2 FastEthernet interfaces
1 Channelized (E1 or T1)/PRI port
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM
31360K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2142
Router>

Sale orders lost after SGEN ????

Hi there,
I am just wondering about something.
After we installed support packages, users created sales order without to get any error message and I we could only see an error message via SM21 which says:
Run-time error "LOAD_TYPEPOOL_VERSION_MISMATCH" occurred.
So after we regenerated the ABAP report: RSM13000 after that everythings seems to be ok.
When now the user try to get those sales order we do not find them.
Now the question is: When we try to find the order numbers which the users created before the regeneration we find nothing.
What about this numbers? Did they have not been created at all or what hapened?
As I know the generation of any ABAP report via SGEN or (RSM13000) will not delete anything.
Thanks in advance
Hanseatik

Hi,
the problem now is not the error message. The problem is: what about the sales order which should be lost after we regenerate the program RSM13000?
We installed the following support packages:
1.     SPAM and SAINT      from 26 to 38
2.     SAP Basis:           From SAPKB62047 to SAPKB62068
3.     SAP_ABA:          SAPKA62047 to SAPKA62068
a.     And 2 CRT
4.     SAP_APPL          SAPKH47022 to SAPKH47033
5.     SAP_HR:          SAPKE47024 to SAPKE47099
6.     SAP_IPPE:          SAPKGPIA06 to SAPKGPIA28
7.     PI:               SAPKIPZI55 to SAPKIPZI59
8.     PI_Basis:          SAPKIPYI57 to SAPKIPYI59
9.     ST_PI:               SAPKITLQG7 to SAPKITLQG8
10.     EA_APPL:          SAPKGPAA06 to SAPKGPAA29
11.     EA_FINSERV:          SAPKGPFA06 to SAPKGPFA29
12.     EA_GL TRADE          SAPKGPGA06 to SAPKGPGA29
13.     EA_HR               SAPKGPHA10 to u2026u2026 SAPKGPHA99
14.     EA_PS               SAPKGPPA06 to SAPKGPPA29
15.     EA_RETAIL:          SAPKGPRA06 to SAPKGPRA29
Thanks in advance
Hanseatik

Hyper-V 2012 R2 - Linux Guest VLAN Settings lost after reboot

Hi Guys,
last night a have seen a strange behavior with a Sophos UTM 9.204020 Linux Guest VM. (This VM is based on SUSE SLES v11? i think)
So i have Setup this in my home lab and experienced the same problem.
----Setup-----
2 External VM Switches
Management OS is on VLAN 4093 with IP 192.168.20.1
The guest network adapter is in Trunk Mode, VLAN Tag (4093) is set in the guest OS with IP 192.168.20.100
Everything works until you kick off a reboot from the guest or hyper-v console, after the reboot you loose the connectivity on the network adapter with the vlan trunk.
If you shutdown the guest and start it everthing works again - this happens only on reboot!!
I have tried diffrent things (static mac, enable disable hardware features (vmq/offloading etc) on the vm network adapter but always the same error.
After some search on the net i have found this article: Link
This guy has the same problem with another linux vm (based on debian) his workaround was to trigger a powershell script with the eventlog after reboot of the vm, this works for me too but this must be bug?
Has anyone else experienced this problem?
André

Hi Andre,
I would suggest you to install the supported Linux guest OS on hyper-v , please refer to following link:
http://technet.microsoft.com/en-US/library/dn531030.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

German umlaute lost after reboot

The strange behaviour is that, after rebooting the linux server where the application is running, german umlaute are lost. If the application is reinstalled umlaute are shown as long as no reboot occurs. There was no problem with this when jre122 was used, problem arised with jre142. The data are read from a mysql database.

It seems that I have solved the problem with the character set. It's not really something that I understand but it works: I have changed the startup script that is used in /etc/init.d/rc5 to start the server. I changed the shell for the script. It was not working when I used #/bin/bash or #/bin/sh but it works when I use #/bin/csh.

Is the file and apps will lost when upgrade to Mountain Lion?

I'm currently use lion and tend to upgrade to mountain lion. is it will affect my files and apps after upgrade to it? sorry, i'm a new user of apple product.

You mustn't lose your apps, but you have to do a backup if the upgrade fails and you can't access to OS. Also, you can check the app compatibility, but if you use Lion, you mustn't have problems with them

Would I be able to access all of my photos and app/game data after I erase all content and settings from my iPod through iCloud?

My iPod Touch 5th Gen. isn't syncing to my computer and I've alread backed it up to iCloud plenty of times. So my question is if I erase EVERYTHING back to factory settings and set it back up as a new iPod can i reaccess all of my photos and app/game data?

If you restore from iCloud backup all your photos in your Camera Roll album and all your iTunes purchases that were on the iPod will be restored. Photos that were synced to the iPod and non-iTunes purchases like music ripped from CDs will not be restored.

ITunes and App store access after changing Apple ID.

Having changed country of residence recently, I changed my Apple ID. However, the old ID continues to come up on my iPad and asks me for my password. The ID has been closed and it will not accept either my old password or my new password under the new ID. It does work on my PC under the new Apple Id, but I cannot access, download or update any apps etc on my iPad.
When attempting to access the Apps Store it constantly comes up with a log-in using my old ID and will not et me change that ID. If I try to change the password using "Forgot password", it simply will not recognise the old ID as being a valid ID. The email address for the old ID is no longer valid or in use and that is why I chnaged my Apple ID rather than setting up a new ID.
Any help greatly appreciated
Old Silva

Hi ,
Welcome to the Apple Support Communities!
I am sorry to hear that you cannot connect to or download from the iTunes and App Stores. There are some very good troubleshooting steps that I would recommend in this situation. Please follow the steps and information in the article below.
Can't connect to the iTunes Store
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Have a great day,
Joe

Python 2.5 and other libraries lost after n900 fla...

Could someone help me to solve this problem with my device? I have flashed my device fw and emmc after its brick. The flashing seemed successfully, but when i try to install some apps like fm radio it returns an error message in which inform me that some installation packages are lost like python2.5. How could solve this and have a functional device again?
please, help me.

if i try to install pygt4 it returns an error message informing me that pytho 2.5 and other lybraries are missed. So i have added maemo extras testing and i have solved. now i can install apps without error message. But i know that extra testing is not safe. i haven't it on my device before tha flasher and i can install all the apps without problems, so i ask what happened. i think i have missed something during the flasher or the nokia have introduced a restriction considering that the ajjara device is new...let me know..thank you

Indesign CS6 crashes and wont startup again after reboot - iMac

Hello
I have a strange issue that has started in the last couple of weeks. If i restart or reboot my iMac my indesign will not open again. It tries to start to open ('loading image' appears and icon bounces in the dock) but always fails and gives an error afterwards each time (i will attach).
What i have done so far is the usual deleting of preferences, replacing default file and rebooting the machine again but nothing works.
The only thing that i can do to get it working again is to reinstall indesign from the disk (design & web premium). All other Creative Suite applications don't need reinstalling and work fine.
Has anyone else had this issue and if so how did they fix it as its bit of a pain having to reinstall indesign after each reboot.

Im having issues adding the error log, here is the first bit of it though.....
Process: Adobe InDesign CS6 [262]
Path: /Applications/Adobe InDesign CS6/Adobe InDesign CS6.app/Contents/MacOS/Adobe InDesign CS6
Identifier: com.adobe.InDesign
Version: 8.0.0.370 (8000)
Code Type:       X86 (Native)
Parent Process: launchd [123]
Date/Time: 2014-09-11 09:05:19.273 +0100
OS Version:      Mac OS X 10.7.5 (11G63b)
Report Version: 9
Interval Since Last Report:          188705 sec
Crashes Since Last Report:           18
Per-App Interval Since Last Report: 186329 sec
Per-App Crashes Since Last Report:   14
Anonymous UUID: A7B9940A-3665-4D31-AF1D-3BFD1BF3E45B
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000006

All photos, videos, settings, and app data gone after IOS5 upgrade

Ive lost all my settings, photos, videos, emails etc. I had created a back up as always since I'm paranoid about loosing my info. My contacts remain thankfully but all my apps have been rearranged into completely random orders. I can't find some apps unless I put in a search for them.
Synching seems to do nothing to help the situation. Where could all of the data in my apps have gone? Why is it so randomly thrown on my iPhone? Anyone else experiencing this?

Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
Therefore, remembe the passcode that you enter this time.
It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup.

Airport WEP keeps getting lost after reboot

Every time I reboot the WEP connection is lost.
How can I set this up so it stays after a reboot and connects automatically?
Thanks

Delete the WAP from your list of preferred networks and also delete it from your keychain using Keychain Access. Then re-add. I had to do this for bith a WPA and a WPA2 access point. Funny thing is that after upgrading to 10.4.8 it took two days for the WPA account to start misbehaving and another 4 days till the WPA2 one started dropping. Deleting completely and re-adding them fixed it both times.

Setttings and app order lost after reboot

Similar Messages

Maybe you are looking for