Setup 2 monitors question geforce GTX 650 ti

I got a Galaxy GTX 650 ti boost 1gb and i try to setup 2 monitors I use the dvi-I with my sumsung P2770HB and my other prob is What monitor use a DVI-D how would i setup the other monitor and what monitor would work?

Any one of these cables would work. You just need to make sure you get the appropriate length. I am surprised Best Buy does not actually have any of the cables themselves and only marketplace vendors.
http://www.bestbuy.com/site/searchpage.jsp?_dyncharset=ISO-8859-1&_dynSessConf=2829174802860454970&i...

Similar Messages

  • Installed Geforce GTX 650 graphics card, but monitors won't turn on

    I have installed a geforce gtx 650 graphics card in my hp pavilion and a corsair hx750 power supply, but after installing it and trying to get it to work the monitor won't detect any signal from the dvi plugs. I've tried looking up the problem before, and I think it is because the hp pavilion is an AMD, so it is locking out any new hardware in the computer, but after uninstalling everything and putting the original power supply back in, the monitors still won't get signal. I don't know if I might have broke something while trying to hook up the power supply or graphics card, but i figured someone else could figure out the problem.

    Hi,
    Please post the HP product number for your PC. How to Find the HP Model Number and the HP Product Number or let HP automatically find your PC model number and HP network attached printers.
    Monitor or monitors?  Title indicates monitors.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • HP Pavilion p6510f Desktop intermittent failures - Antec 25 430 WATT Power & NVIDIA GEFORCE GTX 650

    After installing a new power supply and video card (Antec 25 430 WATT Power & NVIDIA GEFORCE GTX 650), my system became unstable.  It worked fine for the first 3-4 hours then had a BSOD (blue screen of death) with kernel_data_inpage_error 0000007A and later a critical process failure 000000F4.  I've done all of the tests listed on this page as well as removed and replaced the cmos battery:
    http://www.faultwire.com/solutions-fatal_error/KERNEL-DATA-INPAGE-ERROR-0x0000007A-*1137.html
    All of the tests passed and no problems were found and yet the system still fails after 3-4 hours of use.  
    So, I removed everything from my system and restored it to it's original settings.  It seems to be back to normal now (but, we'll see for how long).
    This experience has demoralized me.  This is due to the fact that I've heard of others having difficulties trying to upgrade their systems.  Seems like there is about a 50% success rate unless you know what works from past experience.  I feel that the only way to get a system that has good graphics now is a well tested gaming box (PS3, XBOX, or Wii).  Is there any recommended or possibly well tested setups for this type of system that could give me the quality of a GEFORCE GTX 650 without causing blue screens or cause instability for my computer?
    Since this computer comes with ATI and AMD parts, I presume maybe getting an ATI or AMD graphics card would work?  Regardless of the graphics card, the 250W power that comes with this system would most likely need to be replaced.  Are there are any power supplys that you recommend or possibly tested?
    I realize there are a few questions in this post, but I have one more.  Are there any motherboard analysis tools to enusre nothing has gone wrong with the mother board?  When the blue screens were occurring it seemed to make strange noises from the hard drive as it it were thrashing and after rebooting it would sometimes fail to recognize the existance of the hard drive as well.  Since all of the hard drive tests were successful (I also ran SeaTools), this leads me to believe that the power is inssuficient, but I'm now fearful that if I upgrade the power it will only cause more problems.
    A paying customer,
    Zintage
    This question was solved.
    View Solution.

    So, using the standard setup still makes strange noises at various intervals, but not as frequently.  I have a bad feeling that it has caused disk drive problems based on the fact that:
    1)  Strange noises are now occuring during particular load times (although rarely)
    2)  Computer crashes (although, it no longer crashes now that I'm back in it's regular setup)
    3)  Occassionall it has really slow access times
    These symptoms fall into the category of a failing drive based on the following site:
    http://www.lifehack.org/articles/technology/how-to-tell-when-your-hard-drive-is-going-to-fail.html
    I'm going to return the power supply and game card and look to investing in a new hard drive in case this one finally decides to go to valhalla.

  • Can I put a EVGA GeForce GTX 650 2GB in my HP Pavillion Elite 380t

    I currently have ATI Radeon HD 5450 video card that came with my HP Pavillion Elite 380t when I bought it a few years ago.  I am now using new Adobe Cloud 2014 products including Premiere Pro, After Effects , Audition.  I have been getting messages saying the GPU requires approved NVIDIA graphics card and CUDA 5.0 or later, Mercury Playback Engine, etc.  A friend suggested getting  a EVGA GeForce GTX 650 2GB.  I am trying to figure out if that is a good option and if I can put it into my current computer.
    This question was solved.
    View Solution.

    Hi,
    I have seen some posts out here where using the NVIDIA 650 was problematic.
    I have the same motherboard in my HP e9280t and I was was successful with using the NVIDIA 460 and the 660.  The 460 watt power supply in your PC should be enough for the NVIDIA GTX 660.
    Review this posted article.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Nvidia GeForce GTX 650 Ti Mecury GPU Acceleration CS5.5

    Hi all!
    I am having problems with my GTX 285, so i am looking to upgrade it. I have found the GeForce GTX 650 Ti card quite cheap, but i need to know, does the Premiere Pro CS5.5 Mecury GPU Playback engine support this card? It ain't listed in the list of supported cards, but it's an Nvidia card so i just wanted to be sure I also need to know: is the new cards on the list, that was added in CS6 also supported on CS5.5?
    Thank you in advance
    /gammarik

    Gammarik wrote:
    Also, do Premiere use the CPU? I have a quite fast CPU (6 cored 2.7 GHz AMD chip), so if it does, i am pretty sure that it would be able to cover performance the loss from the GPU.
    Thanks
    /Gammarik
    Sorry to say this but your AMD CPU is not a fast CPU when it comes to video editing.  If you search around on our 1100 record data base of PPBM5 benchmarks the fastest AMD single chip unit ranks at 502 out of those 1100 tested configuration.  This is because AMD does not have some of the latest SSE 4.2 instructions on the chip.  This is why Intel is so highly recommended for video editing.  If you are using any of the MPE accelerated effects or features an you want the highest quality encoding with minimum encoding time you need an nVidia GPU

  • [Request] UEFI GOP VBios For Gainward GeForce GTX 650

    Hello, I have Gainward GeForce GTX 650 graphics card and I want to use UEFI GOP VBIOS:
    S/N: T2130007258
    Attached .rom + pictures of labels
    Thank you,

    Quote from: mal on 10-May-15, 02:00:51
    Hello, I have Gainward GeForce GTX 650 graphics card and I want to use UEFI GOP VBIOS:
    This is an MSI brand forum. There is no support for other brands' products. Contact Gainward for your request.

  • EVGA GeForce GTX 650 Ti SSC 2GB grphics card, support all functionality of PS CS6, and 3D too

    EVGA GeForce GTX 650 Ti SSC 2GB grphics card, support all functionality of PS CS6, and 3D too?
    http://www.evga.com/Products/Product.aspx?pn=02G-P4-3653-KR
    http://www.evga.com/products/pdf/02G-P4-3653.pdf

    EVGA GeForce GTX 650 Ti SSC 2GB grphics card, support all functionality of PS CS6, and 3D too?
    http://www.evga.com/Products/Product.aspx?pn=02G-P4-3653-KR
    http://www.evga.com/products/pdf/02G-P4-3653.pdf

  • Will the Asus Nvidia GeForce GTX 650 work for prem pro?

    Will the Asus Nvidia GeForce GTX 650 work in prem pro. The one in adobe's recommended list does not have an 'X' in the card description?

    [Moved to Hardware forum.]

  • Request:UEFI / GOP Vbios-MSI N650ti-2GD5/OC BE GeForce GTX 650 Ti BOOST

    I would like to request a UEFI / GOP Vbios for MSI N650Ti-2GD5/OC BE GeForce GTX 650 Ti BOOST if one is available. Thanks.
    s/n: 602-V287-140B1305052700
    current vbios:
    NVIDIA Firmware Update Utility (Version 5.118)
    Adapter: GK1xx                (10DE,11C2,1462,2875) H:--:NRM B:01,PCI,D:00,F:00
    The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
    Identifying EEPROM...
    EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
    Reading adapter firmware image...
    Image Size            : 62976 bytes
    Version               : 80.06.59.00.10
    ~CRC32                : CB36F9F6
    OEM String            : NVIDIA
    Vendor Name           : NVIDIA Corporation
    Product Name          : GK106 Board - 20300012
    Product Revision      : Chip Rev   
    Device Name(s)        : GK1xx
    Board ID              : E307
    PCI ID                : 10DE-11C2
    Subsystem ID          : 1462-2875
    Hierarchy ID          : Normal Board
    Chip SKU              : 240-0
    Project               : 2030-0012
    CDP                   : N/A
    Build Date            : 03/01/13
    Modification Date     : 03/14/13
    Sign-On Message       : GK106 P2030 SKU 12 VGA BIOS
    MSINV287MS.330

    I was wondering if I had same card as OP, but mine is Twin Frozr III
    So here's my request for UEFI / GOP Vbios
    S/N:602-V287-120B1305042441
    NVIDIA Firmware Update Utility (Version 5.142)
    Adapter: GeForce GTX 650 Ti BOOST (10DE,11C2,1462,2874) H:--:NRM B:01,PCI,D:00,F:00
    The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
    Identifying EEPROM...
    EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
    Reading adapter firmware image...
    IFR Data Size         : 1208 bytes
    IFR CRC32             : 3536D3A0
    IFR Image Size        : 1536 bytes
    IFR Image CRC32       : EA95C17A
    IFR Subsystem ID      : 1462-2874
    Image Size            : 98816 bytes
    Version               : 80.06.59.00.0E
    ~CRC32                : F1ADD9DB
    OEM String            : NVIDIA
    Vendor Name           : NVIDIA Corporation
    Product Name          : GK106 Board - 20300012
    Product Revision      : Chip Rev   
    Device Name(s)        : GeForce GTX 650 Ti BOOST
    Board ID              : E307
    PCI ID                : 10DE-11C2
    Subsystem ID          : 1462-2874
    Hierarchy ID          : Normal Board
    Chip SKU              : 240-0
    Project               : 2030-0012
    CDP                   : N/A
    Build Date            : 03/01/13
    Modification Date     : 03/14/13
    UEFI Support          : No
    UEFI Version          : N/A
    UEFI Signer(s)        : Unsigned
    Sign-On Message       : GK106 P2030 SKU 12 VGA BIOS
    MSINV287MS.310
    VBios saved from GPU-Z:  **https://dl.dropboxusercontent.com/u/55915400/GK106.rom**

  • Request:UEFI / GOP Vbios-MSI N650ti-2GD5/OC BE GeForce GTX 650 Ti BOOST | split

    Hi
    I'd like a UEFI /GOP bios for my MSI N650ti-2GD5/OC BE GeForce GTX 650 Ti BOOST serial number:602-V287-19SB1303083950
    Can i use the one that is available on the post?
    Thanks in anticipation.
    Andy

    Hi Svet
    Thanks for your prompt reply.
    I have run the Nv flash tool and here is the text file.
    wondered if you could tell me when a UEFI bios will be available for my card.
    Thanks
    Andy
    NVIDIA Firmware Update Utility (Version 5.142)
    Adapter: GeForce GTX 650 Ti BOOST (10DE,11C2,1462,2874) H:--:NRM B:01,PCI,D:00,F:00
    The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
    Identifying EEPROM...
    EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
    Reading adapter firmware image...
    IFR Data Size         : 1208 bytes
    IFR CRC32             : 3536D3A0
    IFR Image Size        : 1536 bytes
    IFR Image CRC32       : EA95C17A
    IFR Subsystem ID      : 1462-2874
    Image Size            : 98816 bytes
    Version               : 80.06.59.00.0E
    ~CRC32                : F1ADD9DB
    OEM String            : NVIDIA
    Vendor Name           : NVIDIA Corporation
    Product Name          : GK106 Board - 20300012
    Product Revision      : Chip Rev   
    Device Name(s)        : GeForce GTX 650 Ti BOOST
    Board ID              : E307
    PCI ID                : 10DE-11C2
    Subsystem ID          : 1462-2874
    Hierarchy ID          : Normal Board
    Chip SKU              : 240-0
    Project               : 2030-0012
    CDP                   : N/A
    Build Date            : 03/01/13
    Modification Date     : 03/14/13
    UEFI Support          : No
    UEFI Version          : N/A
    UEFI Signer(s)        : Unsigned
    Sign-On Message       : GK106 P2030 SKU 12 VGA BIOS
    MSINV287MS.310

  • Hp 8100 elite /geforce gtx 650 ddr3 2gb 256mb

    bought a new video card (GeForce gtx650 ddr3 2gb 256mb)for my 8100 but when I start up the power light turns red and beeps.do I need to upgrade power supply or is this card bad or non-compatible with my computer.

    Hi:
    Does the power supply on that model have the 6 pin supplementary PCIe power connector that the card requires?
    http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-650/specifications
    My 8000 Elite CMT doesn't.
    And you will not be able to upgrade the P/S in any 8xxx Elite desktop because the power supplies are proprietary.
    You will need to get a video card that will work within the limits of the 320 W power supply the PC has.
    If you have an 8100 Elite SFF, the P/S is only 240 W.
    The probable reason the PC is beeping at you, is because you didn't plug the extra power connector the card needs into it.  That is what the specs for the card state it requires.

  • Can I use nvidia geforce gtx 650 2gb video card for after effects?

    Hi I saw the list of graphics cards that are compatible with  after effects... and am wondering if the nvidia geforce 650 2 gb would work?
    I realized all the graphics cards have cuda cores, the gtx 650 2 gb isnt on the list but it has 384 cuda cores?
    Is it compatible?
    GTX 650 2g:http://www.newegg.com/Product/Product.aspx?Item=N82E16814133474

    If it's not on the system requirements list, then After Effects won't use it for GPU acceleration of the ray-traced 3D renderer. Read this page for details about what this means:
    http://blogs.adobe.com/aftereffects/2012/05/gpu-cuda-opengl-features-in-after-effects-cs6. html
    Be sure to read the note marked 'Important'.

  • NVIDIA: Dual monitor question (geforce FX5200)

    Hi all:
    I've been using my geforce FX5200 nvidia card single monitor, just a CRT plugged into the VGA port. I had two CRTs and used a VGA->DVI adapter to attempt to get the second monitor to show (the card has a DVI and a VGA). I was never able to get the second screen to work that way, I don't know if the adapter was bad or the wrong one, but nonetheless it didn't work. I finally got a "DVI monitor." What's the easiest way to get this second monitor to work?

    They should both be picked up on the nvidia-settings tool?
    In theory yes, but in practice there was a problem (or possibly a "feature") on some nvidia cards (or maybe a limitation in the driver) which I also experienced on FX5500 where you couldn't use certain pipes in combination. For example using VGA+TV-Out was not possible so you would have to get a vga-to-dvi adapter and use DVI+TV-Out, which was possible. Since your first try with two CRT monitors failed it might be that your can't use VGA+DVI in combination.
    Edit: unfortunately it was so long ago that I don't have any resources on this. But a quick search now brought me to another example of this
    http://forums.nvidia.com/index.php?showtopic=7530
    Last edited by anrxc (2009-08-24 19:44:19)

  • Premiere Elements 10 Bad/No performance on Win 8 64-bit Core i5-4440 16gig ram and GeForce GTX-650

    Since just over a year i'm the owner of Premiere Elements 10, however it has never pleased me due to bad and inconsistant performance. Just putting video's one after another without any transitions works so-so a few frames per second (which is rediculus). But when i start doing things like motion keyframes, i have no preview at all just a bit of choppy audio. First i thought it was my laptop (a win 7 64-bit core i7 3rd gen, with geforce 610m and 8gig of ram) not bad but i thought well it is a laptop so it might be a bit slower, i'll have to deal with it. However since a few months i own a new PC (specs above), and experience the very same issue. No performance! Every time i think about editing a video i start the program and within a few minutes i get so angry with it that i close it and leave the video's be.
    Pre-Rendering the workspace also has no effect at all. I have no red bar above the timeline (sometimes even green).
    And worst of all it keeps messing up the timing of the video while editing. If you change a clip in the timeline all clips following (the motion edits) are destroyed. Which is only visible after a few hours of rendering, since live preview is only audio.
    What in the world can be done to fix this problem. As you probably can read i'm pretty annoyed.
    The free video editing software that comes with the gopro moves rotates and scales smoothly in live playback, so it is not impossible on the machine. (too bad the functionality of this program is so limited, else i could finally throw Premiere Elements away!).
    Is there anybody who can help me in my despair?

    nVidia Driver Rollback PreElements-10 http://forums.adobe.com/thread/1317675 may help

  • The video card Asus GeForce GTX 650 and GeForce GTX 750 are compatible with After Effects CC? An apology for my English.

    I will buy one of the two, but I urge confirm if any of them will help me with Newest After Effects CC. Thank you very much.

    This page lists the technical specifications for After Effects.
    After Effects doesn't really use the GPU for much besides the obsolete ray-traced renderer (see here), so either one should be fine. Some third-party effects, such as Element 3d from VideoCopilot, make use of the GPU, but their requirements are different from AE's and if you plan to use them, you should check their requirements before you purchase.

Maybe you are looking for

  • Unable to install Itunes, Win-XP, Windows Installer error 1722.

    When I install itunes on XP-SP3 (fully updated) with Windows installer 4.5 - I get this message half the way through -refer to attachment- I have uninstalled all apple products, installed quick time - this installed but still provided the error. I ha

  • How to return my contacts after they deleted suddenly

    Actually , i don't know how they have been deleted or removed So can anyone help me or to tell a way to return my contacts again

  • How to make field as optional in MIGO header screen

    Hi I need to make Deveilvery note header field of MIGO screen as optional based on whether doc is GR based or PO. How to make this screen field  GOHEAD-LFSNR as optional . it shld be optional or mandatory based on t158-vgart = WE or WH. I chcked in B

  • SAP Landscape for ECC,EP,BW,XI, DMS and TREX

    Hi all, I am in the role of SAP Basis Consultant for an IT organisation. One of their client require to install SAP ECC ( FI-CO,MM,PS,HR,REM,PM), EP, BW, XI, DMS and TREX. Their plan is to use ECC 6.0 ( Netweaver 7.0 SR2) with EP 7.0 and all others a

  • Latest iPhone update causes mail download to fail

    I just doownloaded the latest iPhone update and it seems to be fine syncing one of my gmail accounts, but will not sync the main account. I've shut down and restarted several times and have also verified my data is correct but it still doesn't seem t