Setup activity has at least one mode that does not cover

Hi ,
I am getting this error while creating APO PPDS order with setup matrix.
Rgds
V4B.

Hi CTF,
I replying late. This issue was resolved. But you rightly pointed the area.
One more thing. Do you have some doc bcaz setup time is not refelting through set matrix.
Thx
V4B

Similar Messages

[39008] Logical dimension table ... has a source ... that does not join to

Oracle BI 11g
Hi,
I have this set of tables:
1) Table "Sales" with fields: ID, Billdate, ProductID, Amount
2) Table "Products" with fields: ID, ProductName, BrandID, TypeID
3) Table "Brands" with fields: ID, Name
4) Table "ProductTypes": ID, Name
In Physical layer I add these tables and create Physical Diagram with constraints like this:
[Brands] -------------------->[Products]
[ProductTypes] ---------->[Products]
[Products] -----------------> [Sales]
In Logical Layer I create logical table T1 Products with sources:
- LTS1 Brands,
- LTS2 ProductTypes,
- LTS3 Products
and fields:
- ProductID
- ProductName
- Brand
- ProductType
After that I create Dimention With Level-Based Hierarchy (H1 Products):
Total Products
- Brands
-- ProductTypes
--- Detail Products
When I try "Check Global Consistency" I get warning: "[39008] Logical dimension table T1 Products has a source LTS1 Brends that does not join to any fact source."
And after that when I try to make Analysis in Oracle BI, for example:
H1 Products | Amount
and then drill down item "Total Products" I receive error:
"State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14025] No fact table exists at the requested level of detail: [,Brand,,,,,,,,,]. (HY000)"
What's wrong? Where do I mistake? And why I don't get any messages about Logical Table Source LTS2 Product Type?

Hi,
you can create a single LTS for the product with the join for all 3 tables. Do you have a particular reason for the modelling that you have used?
Regards,
Gianluca

Shuffle Mode that does not rep

Dear Creative Representati've,I am planning to purchase a flash based MP3 Player within the next couple of days. I am looking for a player that has a shuffle feature but that remembers not to repeat the same song until it has gone through the entire list of songs. Do any of your players have this or any similar feature that presents the repetition of songs but yet plays randomly? If so, please tell me what model or models will meet these needs.
I am currently interested in purchasing a MUVO Micro200.
Thank you,Rene Requenez

I use a Muvo TX FM, which has three shuffle-modes.
They are: Shuffle repeat, Shuffle once, Shuffle folder.
You can read the detailed descriptions for them on page 40 of the manual:
http://files.americas.creative.com/m...ish_Manual.pdf
Shuffle once and Shuffle folder are described exactly as you want it to be, they even stop playing after playing all songs once in random order. Shuffle repeat keeps on playing, but I guess it does not play a song twice as long as some songs have not been played yet. (like shuffle once without stopping)
I tested Shuffle folder some minutes ago to be able to report, and it seems as if the player remembers which songs have been played, as you want it to be.
Of course I did not listen to the songs in full length, I skipped. Therefore the player did not stop after the last song and then repeated all songs, but if I did not skip the last song, it did stop!
The "V200" and "Micro N200" are technically very similar to the TX FM, so I guess they have the same features. You can look into the other manuals, but the one I found for the N200 was not as good as the obove listed. I could read that the N200 also has the 3 modes that I mentioned above, but there where no descriptions for them.

I have one app that does not show up in Launchpad

I have one app, the game Diablo II, that still shows up in my Applications folder as it always has but does not show up in Launchpad when I pull that up in Lion. All of my other apps are there in Launchpad... but not this one. Any idea how I make an app that I can see in my Applications folder show up in launchpad also?

If the icon exists on your screen, just do a long press on that icon and when the small X appears on top of the app, press it and it will delete it. As long as this is not an Apple app, since those cannot be deleted.

Your HP Officejet Pro 8600 ethernet has my only sound driver that does not work.

I need a nother driver . The one I had was an IDT High Definition Audio CODEC. I installed one 3 days ago and it has vanished. I cannot seem to get one to take it's place. Your software keeps going in cicles and I have not been able to capture it.
Please help!
Gene (Personal information removed)
Ontario , Canada

Hi @toby123 ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here
Regards,
George
I work for HP

One node that does not join cluster

I'm trying to run some performance tests with Coherence, with 3 consumers and one producer node. I can get the producer and two of the consumers to join the cluster every time, but the third doesn't seem to join the cluster at all.
It's just that one machine, even though it's configured the same way as the other two consumers, even using the same cache config XML file.
Can anyone suggest a way to figure out why this is happenging and fix it?
Thanks!

Well, the port we were using produced some oddball results; the nodes received some data that they apparently couldn't identify. When I tried a different port, I got the exception below instead. I tried a few different ports, and they all produced the same result.
Does it matter where in the file hierarchy the tangasol-coherence.xml file resides? The jar I have here actually contains two copies of it.
Thanks!
java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERV
ICE_STOPPED, STATE_ANNOUNCE)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.s
tart(Service.CDB:61)
at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:515)
at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCl
uster.CDB:2)
at com.tangosol.coherence.component.util.SafeCluster.restartCluster(Safe
Cluster.CDB:5)
at com.tangosol.coherence.component.util.SafeCluster.getRunningCluster(S
afeCluster.CDB:20)
at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluste
r(SafeCluster.CDB:1)
at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.C
DB:2)
at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:792)
at com.tangosol.net.CacheFactory.getDistributedCacheService(CacheFactory
.java:468)
at com.tangosol.net.CacheFactory.getDistributedCacheService(CacheFactory
.java:437)
at com.tangosol.net.CacheFactory.getDistributedCache(CacheFactory.java:3
84)
at df.core.distributed.coherence.Bridge.initialize(Bridge.java:50)
at df.core.distributed.coherence.Bridge.<init>(Bridge.java:42)
at df.core.distributed.coherence.Bridge.getInstance(Bridge.java:35)
at df.core.distributed.coherence.DistributedPicture.<init>(DistributedPi
cture.java:48)
at df.core.distributed.coherence.CandidatePicture.<init>(CandidatePictur
e.java:39)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at df.viz.MainFrame.setMode(MainFrame.java:229)
at df.viz.ControlDialog.startActionPerformed(ControlDialog.java:252)
at df.viz.ControlDialog.access$000(ControlDialog.java:20)
at df.viz.ControlDialog$1.actionPerformed(ControlDialog.java:119)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:17
86)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Abstra
ctButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel
.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonL
istener.java:245)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)

HT1848 when i purchase music on itunes and sync my iphone5 the new song appears twice -- one version that does not play when you click on it and another that plays. why is this happening? what can i do to remove the version that is 'fake'?

I bought music from itunes and synced my iphone5 to get the music on it. The problem i am having is that 2 versions of the song appear on my iphone -- one light gray 'fake' version which doesnt play when i click on it and another real version. can anyone help why this is happening? and how i can delete the 'fake' version from my iphone?

If that's the best you can do why don't you get on another forum?

[39008] Logical dimension table has a source that does not join to any fact

Dear reader,
After deleting a fact table from my physical layer and deleting it from my business model I'm getting an error: [39008] Logical dimension table TABLE X has a source TABLE X that does not join to any fact source. I do have an other fact table in the same physical model and in the same business model wich is joined to TABLE X both in the physical and business model.
I cannot figure out why I'm getting this error, even after deleting all joins and rebuilding the joins I'm getting this error. When I look into the "Joins Manager" these joins both in physical as well as logical model do exist, but with consistency check it warns me about [39008] blabla. When I ignore the warning and go to answers and try to show TABLE X (not fact, but dim) it gives me the following error.
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: TABLE X.column X Please fix the metadata consistency warnings. (HY000)
SQL Issued: SELECT TABLE X.column X saw_0 FROM subject area ORDER BY saw_0
There is one *"special"* thing about this join. It is a complex join in the physical layer, because I need to do a between on dates and a smaller or equal than current date like this example dim.date between fact.date_begin and fact.date_end and dim.date <= current_date. In the business model I've got another complex join
Any help is kindly appreciated!

Hi,
Have you specified the Content level of the Fact table and mapped it with the dimension in question? Ideally this should be done by default since one of the main features of the Oracle BI is its ability to determine which source to use and specifying content level is one of the main ways to achieve this.
Another quick thing that you might try is creating a dimension (hierarchy) in case it is not already present. I had a similar issue few days back and the warning was miraculously gone by doing this.
Regards

Our Forums' FICO High Achievers: Who has at least one FICO Score of 760 or above?

I've noticed that some Forum members have improved their scores, and now have at least one FICO score of 760 or above. Others, have had 760+ scores longer. This is not a contest or competition to see who has the highest FICO scores. Rather, I'd like to see which Forum members are FICO High Achievers. Who has at least one FICO Score of 760 or above?
Message Edited by psychic on 04-02-2008 02:59 AM

Good thread Psy, I have been close monitoring this forum in hoping to one day reach 800. From my previous posts, my fico scores been from mid 650's to now 750-760 on TU,EX, and EQ. These changes reflect from only a month that I started to monitor my scores. Since 650's, a month ago, I have since removed 1 late payment, got my util to down to 14% with activities showing on 9 out of 16 c.c.'s, and finished my payment on a leased car. I took a 10 point loss on TU, 6 point loss on EX and 4 point loss on EQ for using a zero balance c.c. few weeks back. Just wondering tho, if I got my util to 1-3%, what kind of increase I could see on my scores...I did the simulator but the point increase doesn't seem to be accurate since it doesn't take in to consideration that I will have most of my c.c. reporting a zero balance except for 1 or 2 accounts so I can maximize my points. I still have a c.c. from BofA that I opened up last September that shows as new account but I'm hoping that it will be removed from the negative factor to boost me up in few more points... I just want to be safely over 760's to maximize my interest when I'm ready to buy my first house. But 800+ would be just dandy.

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal

Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal Pre icon, File, Edit, Clip, etc.
I am planning on purchasing Premier Elements 13, would it be better if I bought a new program rather than download an upgrade, just in case the upgrade doesn't load properly due to the error with my existing program?
If I the deleted Premier Elements 9 on my PC would I lose all my existing videos that were produced using Premier Elements 9 or would they be saved so that they can still be worked on in Premier Elements 13?
Does Premier Elements 13 work with Windows 7?
Thanks
Terry

Premiere Elements 13 absolutely works with Windows 7!
In fact, I'd highly recommend you download the free trial and give it a test run.
Meantime, go to Windows Update and make sure you have all of the latest Windows updates, including those that don't install automatically. Then go to the nVidia or ATI site and ensure you have the latest driver for your graphics card, and go to Apple.com and ensure you have the latest version of Quicktime, per the program's requirements.

I've become increasingly frustrated with the ipad adobe app. I've subscribed to be able to convert my pdf files into word documents and it has yet to work I've paid for a service that does not work which in turn makes me a disgruntled customer to say the

I've become increasingly frustrated with the ipad adobe app. I've subscribed to be able to convert my pdf files into word documents and it has yet to work I've paid for a service that does not work which in turn makes me a disgruntled customer to say the least very disappointed with such horrible service

Which service did you subscribe to? Adobe PDF Pack?
Once I know the service that you subscribed to, I can move this post to the right forum so that you can get in touch with the folks who can assist you.

ITunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?

iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?
Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?

Thanks for the suggestion kcell. I've tried both versions
9.0.115 and 9.0.124 and both fail with the policy permission error.
I also tried with and without your crossdomain.xml file but
with the same result. It looks like this file is intended for URL
policy, instead of socket policy. Recently Adobe separated the two.
When I run with the files installed on my dev PC, it does
work, which makes sense because the flash player isn't loaded from
an unknown domain.
I did get one step closer. If a crossdomain.xml in the server
root exists and the socketpolicy file is loaded from the app folder
then the first two warnings disappear. The logs now show:
OK: Root-level SWF loaded:
https://192.168.2.5/trunk/myapp.swf
OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
OK: Policy file accepted:
https://192.168.2.5/trunk/socketpolicy.xml
Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
seconds) while waiting for socket policy file. This should not
cause any problems, but see
http://www.adobe.com/go/strict_policy_files
for an explanation.
Warning: [strict] Ignoring policy file with incorrect syntax:
xmlsocket://192.168.2.5:993
Error: Request for resource at xmlsocket://192.168.2.5:993 by
requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
lack of policy file permissions.
Which basically says, everything is okay, but you stay out
anyway.
PS: I found the XML schema files here:
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
and the socket policy schema:
http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
UPDATE: When serving up the policy file on port 843 using the
example perl script then the socket connection seems to be accepted
and the connect succeeds. After that flex hangs trying to logon to
the IMAP server.

All-in-one 6830 printer Does not enter sleep mode when connected to a phone line

HP staff help. HP all-in-one printer 6830 does not enter sleep mode when conntected to a phone line via 1-Line jack. The Firmware is PNP1CN1521AR. On August 1, 2015, I purchased an HP all-in-one 6830 printer and upgraded to firmware PNP1CN1521AR.When a phone line is connected to 1-Line jack of 6830, the printer will no longer enter sleep mode and the display remains on indefinitly.Removing the phone connection either from the wall outlet or from the printer causes the sleep mode to work correctly again where the control panel display turns off after 5 minutes (or optionally after 10 or 15 minutes).This problem was previously reported by a user and has not been resolved, see:http://h30434.www3.hp.com/t5/Other-Printing-Questions/Sleep-mode-of-Officejet-Pro-6830/td-p/4772182 The user did not receive a resolution to this problem according to the thread.
There seems to be a 6830 printer firmware or hardware problem causing this. HP should be able to confirm this problem on 6830 easily.
Please advise ASAP.
Thanks

It's a regular analog phone line. I've tested it with other phone lines. No difference. I have another all-in-one printer which works fine (goes to sleep mode) when plugged into the same phone line.
The 6830 works ok in other aspects. The only problem is the sleep mode. Any 6830 with the firmware I mentioned should replicate the same result, regardless of anything else. The previous firmware to PNP1CN1521AR also created this problem according to the original report of this problem by another user.
I'm sure there's a bug in the firmware. A subroutine in the firmware monitoring the incoming fax ringing, mistakenly, sees the voltage across the phone jack pins as an event and wakes up the printer instantly even though there's no ringing. As the previous user also suspected, there seems to be an error in the phone line voltage threshold used by the firmware. The present firmware always sees a ringing at the phone line which causes it to never stay in sleep mode.

HT1296 I already have an itunes account on my laptop but have been setup on a mac and have songs that have not been purchased from the itunes store, I cannot get the songs from my iPhone onto my itunes account on the mac. how can I do this?

I already have an itunes account on my laptop but have been setup on a mac and have songs that have not been purchased from the itunes store, I cannot get the songs from my iPhone onto my itunes account on the mac. how can I do this?

You copy them from your old computer or your backup copy of your old computer.
The iphone is not a backup/storage device.

Setup activity has at least one mode that does not cover

Similar Messages

Maybe you are looking for