Setup Airport Extreme Port Mapping for Swann DVR16-2600

Have a Swann video surv system and want to use iPhone 4 and Web to view camera displays remotely. It requires setting up port mapping for the DVR so it can serve ports 80 and 9000 to the remote display app and web screens.
Have signed up for a static public ip address from ISP since they do not allow port mapping using DHCP. Trying to setup so I can use the SwannView application on iPhone 4 and use Webview in browser to access/see security camera displays on/through the DVR. Not working correctly - only partial success.
Reconfigured Airport Extreme for the new ip address and tried to setup port mapping for dvr which needs a web port 84 and another port 9000. Can connect to DVR on internal network using the public static ip:84 and the internal static ip:84 but it only shows a SWANN splash page and an error about not able to load ipaddress:84/65536. Seems like something is preventing the Web display from completely launching - should see a login page but not getting it.
Airport is set to use static ips in the 10.0.1.2 to 10.0.1.10 range with the DVR assigned 10.0.1.5. Tried to set the port mapping for 84 and 9000 but not sure those are working correctly. Swann support tried accessing the DVR over the public ip address and they cannot get through. So suspect problem is with configuring the Airport Port Mapping settings and services, etc. on the Airport Extreme. I can get to the DVR internally using the public ip address:84 and the internal static ip address of the DVR:84 but support cannot get to it from external web.
Tried both Safari and IE 5 and both show same problem trying to launch the Swann login page, etc. iPhone Swannview app doesn't work either.
Any ideas about proper port mapping settings for those ports in the Airport Extreme? Is this correct setting for the Service Type: _http._tcp and do you need to add settings for the public and private udp ports. The udp port fields are empty. Only have entries in the Private IP Address and Public and Private TCP port fields.
Is there a way in Safari or IE5 to set security to see the public ip address as a friendly site and not block anything from loading?

Set port mapping for 85 (not 84) and 9000
Also, if you haven't, be sure to go into the Swann DVR setup and disable the "enable UPnP" option. The UPnP protocol will not work with Port mapping feature of the Apple Airport Extreme.

Similar Messages

How to make Mac OS X Server auto-configure Airport Extreme port-mapping

Mac OS X Server can automatically configure AirPort Extreme to make services such as iChat, Mail, Web, and VPN accessible: http://www.apple.com/server/macosx/features/networking-vpn.html
I presume this configuration generally takes place during a fresh installation of the server.
Is there any way to re-run this process post-installation?

That page talks about Snow Leopard's Networking abilities, not Leopards.
Off hand, I don't know whether what you describe is a new feature in Snow Leopard or not, but I've never seen Leopard do it (and, to be honest, wouldn't want to).
In either case, it's basically just Bonjour telling the router to configure port forwarding. Given that, I'd start by enabling mod_bonjour in Apache:
#LoadModule bonjour_module libexec/apache2/mod_bonjour.so
but I don't know how other processes are doing it.

Can you use airport extreme 802.11n for files backup

Can you use airport extreme 802.11 for files back up and sharing

You can if you connect a hard drive that has been formatted correctly to the USB port on the AirPort Extreme.
Apple does not officially support Time Machine backups for this type of setup, but you could store regular files this way.

TCP's port mapping for safe access

So, I have a statical IP and need to organize safe access to my domestic NAS via Capsule from Global Internet, it means I need https://.
As I know (may be it's not) TCP's set 443 can provide https:// only.
I could not find such TCPs pre-set in Capsule.
I tried to use all pre-set (one after the other) and even made a new set with TCP 443 (just by hand), but all my attempts ended by changing TCP's 443 to 8080 automatically and I saw https:// when I tried to make a safe enter.
Pls., explain, how can I do it?
Thanks' a lot advance.

You have to map port 443 to the NAS IP in your local lan..
You should be able to access it no problem.. there is nothing preset on the TC.
Read the instructions by Tesserax on port mapping for v5 or v6 utility depending on which one you use.
https://discussions.apple.com/community/wireless/airport?view=documents
IMHO if your TC is not the latest AC you will have far more success with v5 utility.
v6 seems to have issues making it stick.
You can load the older version into Mountain Lion .. but according to your profile you are on 10.6 so still fine for v5.

I cannot add a Wi-Fi guest network. Gone to Utilities Airport Utilities and all get is an image/browser of my Airport Extreme. Looking for the browser which has the title Wireless but cannot find anywhere. I need help?

I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?

Open AirPort Utility. The first screen looks something like this:
Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
If you do not see these screens, you will need to start over and configure your AirPort again.

How to setup airport extreme vs express at WDS mode?

How to setup airport extreme(Main) vs express(Site) at WDS mode?

Please check out the following Apple Support article on how to configure a WDS.

I am running 10.8 and setup airport extreme to run music from my imac to my receiver in the other room. When I open sound from system preferences, I don't see an external device to choose, other then internal speakers. Any ideas?

I am running 10.8 and setup airport extreme to run music from my imac to my receiver in the other room. When I open sound from system preferences, I don't see an external device to choose, other then internal speakers. Any ideas?

Airport Express (the small Airport device, which is the only one with an audio connection) works through Airtunes, which only works with iTunes. The computer won't send ALL system sound to the Airport. If you actually want to send sound outside of iTunes, use Airfoil.
Matt

Open AirPort Extreme ports for directv whole home access, need 8080, 8843, 1701. How do I make these changes?

My Directv Whole Home system is not recognized by my AirPort Extreme. The Directv tech recommended making changes in my AirPort firewall opening ports 8080, 8843, and 1701. Any suggestions would be appreciated.

The following are the basics for setting up one of the 802.11n AirPorts for port mapping/forwarding:
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the DirectTV device.
AirPort Utility > Select the AEBSn > Manual Setup > Internet > DHCP tab
On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
Description: <enter the desired description of the host device>
Reserve address by: MAC Address
Click Continue.
MAC Address: <enter the MAC hardware address of the host computer>
IPv4 Address: <enter the desired IP address>
Click Done.
2. Setup Port Mapping on the AEBSn.
AirPort Utility > Select the AEBSn > Manual Setup >Advanced > Port Mapping tab
Click the "+" (Add) button
Service: <choose the appropriate service from the Service pop-up menu>
Public UDP Port(s): <enter the appropriate UDP port values>
Public TCP Port(s): <enter the appropriate TCP port values>
Private IP Address: <enter the IP address of the host server>
Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
Click "Continue"

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

Help for a technically challenged person / can't setup airport extreme

I have tried everything and I can't get it setup.

Ok, I'm back!!
Airport setup was successful. (excellent!! but I have seen this page before)
Please wait while your AirPort Extreme restarts......tic tok tic tok tic tok...5 min later
Airport was unable to find your Airport wireless device after restarting.
An error occurred, close the config window & try again. No Luck.
So....i swap internet wires (back to the belkin)
long wait.......................belkin won't start??...hum
unplug belkin & unplug modem.........hum, still won't start...Turn off wireless connection on IMac / turn it back on.....still not working....the only device listed is belkin54g
Scratching head now.....go to another computer....won't connect (this is not good)
Idea! Unplug Airport Extreme from the power.
Its magic!! IMac instantly comes back along with my other computers....Internet is working as it should....It was the AirPort Extreme that took over the identity of the belkin (even the name...kind of like identity theft)

Setup Airport Extreme for the home wireless - MacBook Air, Pro, and iPad connect just fine. Wireless will not work to Windows 7 and Vista machines - network seen, tries to connect, but fails after entering WPA key.

Can't get Windows Vista or Windows 7 laptops to access internet via Airport Extreme. Works fine with security on MacBook Air, MacBook Pro, and iPad. Brand new Airport, bought today. Windows machines worked fine with existing, relatively modern Cisco home router. The Windows machines see the wireless network, prompt for password, and then cannot connect. Have tried all sorts of things with Windows machines, deleted existing networks, etc. even tried guest login with no security on the Airport - no luck. Windows XP machine directly (wire) connected works fine. Magic Jack works OK. Light is green on the front.

Thank you very much for your help @Sunshyn2005!!!!! I think we're good to go now!

Airport Express Port Mapping

I have an Airport Extreme as my main router base station. I recently bought an Airport Express in an effort to connect a Slingbox Pro to it. My Slingbox works ok with my laptops connected to my network but it won't work when trying to setup internet viewing. According to the Slingbox tech, is due to Airport Express not having Port Mapping. Is this true? Any advice would be appreciated.

Hello DAVE72. Welcome to the Apple Discussions!
According to the Slingbox tech, is due to Airport Express not having Port Mapping. Is this true?
Not true! The AirPort Express Base Station (AX) supports port mapping. If you are using the AX to provide Internet access from your AirPort Extreme Base Station (AEBS) to the Slingbox, only the AEBS would need to be configured for port mapping.

Airport NAT/Port Mapping not working :(

Hey kids,
I've recently scored myself a time capsule and I'm totally loving the time machine functionality, but the airport extreme part is causing me a little bit of grief!
I commonly use applications like transmission and play online games etc, not to mention usually have personal web sharing enabled for work etc.
Since i've installed the extreme i've had loads of issues getting ports to forward outside the local network!
The old router I had (a belkin one) did all this stuff with no hitch at all.
As an example, if I launch say, transmission my port status is apparently "stealth" even though i've got the automatic setup enabled. If I load the airport utility and manually forward the port no difference is made.
Additionally, if I enable web sharing and choose the web sharing service from the airport utility drop down the same stuff happens... port 80 isn't made available from outside the network
Has anyone else run into these issues?

Really frustrated with this problem. Does anybody at least know how to debug the problem ?

Airport Extreme & Remote Access for database application

Hi There,
I have spent an entire week of my time between apple, apple consultants and networking experts trying to get a access remotely to a simple database program inside an wireless network. I have read the discussions on remote access thru the AEBS and port mapping.
I'm hoping an user here can help me with a foolproof solution that the 'apple experts' can seem to design?
All that is required to get this program up and running remotely is the ip address of my computer inside my wireless network. I have set that this computer to a static address but since my dsl provider uses dynamic IP's this doesn't seem to work (or it does for about 12 hours until the IP address of my AEBS is changed). Will port mapping work for me or is my only solution an up-charged static IP?
Thanks in advance for any suggestions......the thought of spending another week on this is frightening!

If your ISP is refreshing the dynamic host configuration of the public ip address assigned to the ISP provided router you will need to request a static ip address from your service provider.
The addresses that are used "inside of your network" are private ip addresses. If you are using the (1) public address for your router (APE)(Apple airport extreme) from the ISP what you are trying to do will not work very well since your router (APE) will use the Public IP address to provide access to the public internet for your private network using the private ip addresses you have used to create your subnet and told your router (APE) about. Three private IP address schemes can be used for a private internet. One for each class. Class A 10.x.x.x/8, Class B 172.16.0.0/12 and Class C 192.168.0.0/24. Translated using dynamic NAT (network address translation with overload) making your LAN hosts using private IP addresses to seem as if they are using a public ip address allowing access to the public internet where only public ip addresses can be used.
PAT (port address translation) is what you are trying to accomplish. For PAT you must have a valid public ip address from your ISP and a private address from your network assigned to interesting host. Use the private ip assigned to the interesting host in the port mapping panel of airport admin that you wish to allow access to via the global internet as well as the tcp or udp port number for the traffic to be directed. For example port 5003 for FileMakerPro or port 20 and 21 for ftp. You should also implement security policies to protect your network and hosts.
Since you said that it works for 12 hours you must have the basics set up correctly. All you need now is to get a static ip address assigned to you from your ISP or use a service such as http://www.dyndns.com/
Hope I didn't ramble on too much

NAT configuration and Port Mapping for xBox

I'm looking for help with port mapping to open up the NAT for an xBox One. I'm working with the following network devices:
xBox One
DSL Modem: Embarq (ZyXEL) 660R series
Airport Extreme version 7.7.3
I understand the following from researching the issue:
The default settings for both devices block the ports needed for xBox Live.
Airport Extremes are not on the compatible list for xBox.
Port Mapping is better then creating a DMZ for the xBox.
The xBox needs its own manually set IP address.
I switched my Network>Router Mode from Off (Bridge Mode) to DHCP and NAT. I then created a DHCP Reservation and the Port Settings for that IP.
After doing this, the Airport would restart and display a warning - Double NAT. I figured this was because the 660 settings showed the NAT Mode to be SUA Only. The Edit Details link displayed an empty table where you edited the SUA/NAT Server Set. I switched from NAT Mode>SUA Only to None. So there was my Double NAT and I would have thought that would have removed one.
I also disabled the Firewall and Enabled the UPnP.
After restarts the Airport continued to display the Double NAT error. However, with the 660's NAT Mode set to None, the Internet was not there. Web browsers and email accounts replied with server not found.
Only with the 660 set to SUA Only and the Airport in Bridge Mode is the Internet accessible. I now have the details for the SUA filled out for the xBox's IP address and ports.
Hypothesis
Since both devices are acting as DHCP servers the port mapping is not working. Rather then have the 660 distribute IP addresses and then having the Airport distribute another range of numbers, I need to have both devices bridge and distribute one range of numbers. Currently the 660 is using the 192.168 range and the Airport is using the 10.0 range.
Am I correct? Any thoughts and suggestions are welcome.

Port forwarding through a double NAT.. is near impossible.. !!
And the xbox is so attuned to using UPNP it is very hard not to.. even port mapping is not a great fix. Since apple decided gamers did not count as users for Airports.. I think honestly it is best to bypass the airport and stick to upnp from the modem router.
What method of authentication does your ISP use? Because it is really better to use one router.
And in fact the router should be the Zyxel. If you plug the Xbox to the Zyxel running in full router mode, with the airport removed from the network does it work and open NAT??
If not replace the Zyxel with a modern listed router that is xbox compatible and bridge the airport to it.

Setup Airport Extreme Port Mapping for Swann DVR16-2600

Similar Messages

Maybe you are looking for