Setup bootdisk for systems that do not boot from cd

I have a compaq lte 5400 that will not boot off the cd on the docking unit, nor the notebook even though it can be set in Bio. Will a boot disk come with the new dest top? Or can it be down loaded? It has the latest Bio update.

It sounds like you are asking for a bootable floppy. JDS 2.0 also comes in the form of CDs or downloadable CD images. If you are able to install JDS on an alternate system, there is a utility for creating bootable floppy images.

Similar Messages

  • [Solved] Installing on a system that does not boot from cdrom or usb

    I have a very old and stuborn gateway solo 5300 laptop that refuses to boot form the disk I burned for arch linux, as well it refuses to boot from the usb disk I made with dd acording to Usb Flash Installation Media on the wiki
    I also tryed UNetbootin: Install Arch Linux Without a CD From FTP. 
    It currently boots to windows xp, has two partitions and I wish to overwrite the entire hardrive.  Do you have any sugestions?
    Last edited by meschael (2014-06-27 02:03:56)

    ewaller wrote:... Even a fully loaded machine (512MB) would be of little (if any) use
    Really?  I have a netbook with a total of 1G, and I never get anywhere close to using even half of that.  Certainly this depends on the programs used - but for terminal only, 512MB would be more than enough IMHO.  On my 1GB, I boot into X with a simple WM, and can use lightweight (but fully functional graphical) web browsers like luakit and dwb without getting anywhere near half RAM use.
    If it is just 128MB, I agree that may be more of a problem.  I wonder if Slitaz is still going - that was my favorite "micro" distro, but I have not kept track of the development in some time.
    As for the main problem of the thread, I've reread your OP a couple of times, but I'm not sure I'm fully clear on your steps.  First, unetbootin is expected to not work for arch.  Have you made an iso using `dd`?  Can you boot other live cds or usbs on the machine?  In other words, is it a limitation of your hardware, or have the isos you've tried for arch just not worked yet?
    Last edited by Trilby (2014-06-22 23:41:36)

  • G4 that will not boot from any disc EXCEPT the Apple Hardware Test CD

    We have a DP 1ghz Quicksilver PowerMac G4 that will not boot from any disc EXCEPT the Apple Hardware Test CD that came with the machine.
    We were in the process of installing 10.4 Tiger before placing it for sale.
    The Mac was originally OSX Server 10.1 that we later converted to a worksation running 10.3 Panther.
    It has 1 GB of memory, 80GB hardrive, 250MB Zip Drive and a Radeon 7500 video card.
    Since this machine only has a CD-R drive and not a DVD-R, we installed Tiger using another Mac via Target Disk Mode. The installation process went well, but when I tried to reboot I got a Kernel Panic right after startup screen with the grey Apple logo.
    On some reboots we get to the blue startup screen, others it stops at the grey Apple logo, others a black box like the a Kernel Panic - but with no text. Twice it went directly into Open Firmware.
    We have done the following during our troubleshooting:
    - Reseat RAM, Video Card, Hard Drive, Zip & CD-R connections
    - Remove RAM 1 stick at a time and reboot
    - Replace RAM with RAM from another working Quicksilver
    - Replace Video Card with one from another working Quicksilver
    - Zap PRAM
    - Reset CUDA switch
    - Unplug the MAC and remove everything (RAM, Battery, etc) for 30 minutes and try to reboot
    - Tried booting from the Macintosh Server G4 Software Restore CD
    - Tried booting from Mac OS X Server CD
    - Tried booting from AppleCare Protection Plan CD with TechTool
    - Tried booting from Diskwarrior CD
    - Tried booting from an external FireWire drive with a disk image of Tiger OS Install
    - Tried booting with the hard drive disconnected
    The Mac WILL boot from the Apple Hardware Test CD and will pass ALL of the extended tests.

    Conventional wisdom says that any Mac that will not boot up from a System/Install CD OS 9 or an Install CD Mac OS X, has a Hardware problem.
    The diagnostic CD is a red herring because it uses a very primitive method of reading the CD, and so does not properly represent the machines general ability to read CDs.
    I would look at the CD drive cables, etc, and see if another drive gives different results.
    You have not mentioned using the Startup Manager (option key at Startup) to do any checking:
    HT1310- Startup Manager: How to select a startup volume

  • Is there a solution for graphs that do not translate from Excel to PDF?

    We are working on an Excel Spreadsheet with graphs but when we create a PDF of the sheet the graph does not contain the ledger or values. Is there a solution to this problem. We have tried both printing to PDF and exporting to PDF.

    Just a note: If you want to print the PDF to paper, it may still not print correctly even though it looks correct on the PDF document- the printed graph may flow off of the paper sheet.  When you click Print, a print dialog box opens with some options and a preview.  If the preview does not look correct, change the size option to "Shrink oversized pages".  
    Jeffry Calhoun
    Workforce Analytics Manager
    Ohio Department of Job & Family Services
    P.O. Box 1618, Columbus, OH 43216-1618
    InterAgency: F376, 4020 E. 5th Avenue
    614-644-0564
    Fax 614-728-5938
    [email protected]
    OhioMeansJobs.com -
    The next best thing to having an HR department.
    OhioMeansJobs.com -
    Ohio's premier website for connecting businesses and job seekers - quickly, easily, and for free!
    >>> alscud <[email protected]> 4/9/2012 9:34 PM >>>
    Re: Is there a solution for graphs that do not translate from Excel to PDF? created by alscud ( http://forums.adobe.com/people/alscud ) in Creating, Editing & Exporting PDFs - View the full discussion ( http://forums.adobe.com/message/4323530#4323530 )
    Thank you Lori for your help your suggestion works!
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4323530#4323530
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4323530#4323530. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Creating, Editing & Exporting PDFs by email ( mailto:discussions-community-acrobat-creating__editing_%[email protected] ) or at Adobe Forums ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697 )
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
    Ohio Means Jobs
    You're looking for something unique. Use more than an ordinary site.
    http://www.ohiomeansjobs.com
    This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message.

  • Ok to format SYSTEM partition if not booting from original drive anymore?

    I bought a SSD for my HP Pavilion dv7 and installed it as the primary boot drive, upgrading with a new copy of Windows at the same time. I use the original drive in the second slot for data, and have formatted the original C: partition, but not touched the other 3 partitions. I would like to be able to use at least one primary partition for another OS or as a backup partition. If I want to leave the recovery partition alone, and be able to run diagnostics, that means SYSTEM....Can the recovery tools work if they are not on the boot drive? If so, I can take the SYSTEM partition (the SSD has the active boot partition).
    This question was solved.
    View Solution.

    Hi,
    Unless the Bios can access the HP_TOOLS partition at boot ( which it will not be able to from the drive in the second bay ), you will lose the ability to run the extended diagnostics and the ability to have the bios flash execute on reboot.  The bios will still be able to be updated, but the flash will run in the Windows environment which has more potential to cause problems.
    However, the HP_TOOLS partition can be created on a flash drive or you could simply create it on your SSD - see the document on the link below regarding this - this is just as an example and the download included may not be correct for your particular notebook, so you would need to get this from your own Product page.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-101396-1&cc=uk&dlc=en&lc=en...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • IMac will not boot from any mode except Target Disk

    I have an Early 2008 Penryn iMac 24" MB398LL/A running OS X 10.7.4 (see specs below) that will not boot from ANY mode, It also has several strange vertical bars from top to bottom on the screen. They are about 10 px wide, with some pixels empty and looks a bit like a barcode if you squint at it.
    I have tried Safe Boot, Force Boot, DVD Boot, FireWire/USB Boot,  and it always gets to the same point. It gets to the apple screen with the spinning gear and then after about 8 seconds it freezes. The only way it works at all is in Target Disk Mode. It pops right up on my Macbook Pro and I was able to grab all my info!
    I have run Disc Utilities and Tech Tool on it many times from my MBP and it passes every test.
    I reformatted the HD and installed 10.7 again, it still freezes up at the same point. 
    I have tried using Single User mode and every time have had to run /sbin/fsck -fy twice because it always says the disk is ok but it was modified on the first pass.
    I thought maybe it had a bad video card or logic board but and I ran the Apple Hardware Test on many occasions and it always passes. Recently I was told about Loop Mode and just completed running the AHT for just over 30 hours without any errors at all.
    UPDATE...
    Strange Part… I tried installing Mountain Lion in Target Disk Mode and everything went smoothly. When it restarted on its own the lines on the screen were gone for the moment, but the Mac still freezes up on the spinning gear and immediately restarts on its own.  I have run every thing listed above on it and still nothing. Sometimes the lines reappear then in two more starts they are gone.
    I did manage to have it start one time got a copy of the  the error report (its at the bottom too) The Mac ran for at least 30 minutes with no problems, then the screen went crazy a few seconds and it became unresponsive. The mouse moved but that was all it could do. Now my iMac continually restarts itself, I don't have any more ideas, HELP!
    Specs...
    The iMac "Core 2 Duo" 3.06 24-Inch Aluminum (Early 2008/Penryn) features a 3.06 GHz Intel "Core 2 Duo" processor (E8435), with two independent processor "cores" on a single silicon chip, a 6 MB shared level 2 cache, a 1066 MHz system bus, 2 GB of RAM (800 MHz DDR2 SDRAM, PC2-6400), a 500 GB (7200 RPM) Serial ATA hard drive, a vertically-mounted slot-loading DVD±R DL "SuperDrive", NVIDIA GeForce 8800 GS graphics acceleration with 512 MB of GDDR3 memory, a built-in iSight video camera, and built-in stereo speakers underneath the 24" glossy TFT Active Matrix LCD (1920x1200 native) display.
    Error Report…
    Sat Sep  1 17:13:12 2012
    panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
    RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
    RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
    R8:  0x0000000000000000, R9:  0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
    R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
    RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0

    Here is the complete error log...
    Sat Sep  1 17:13:12 2012
    panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
    RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
    RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
    R8:  0x0000000000000000, R9:  0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
    R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
    RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80602db800 : 0xffffff801a41d5f6
    0xffffff80602db870 : 0xffffff801a4b7b95
    0xffffff80602dba40 : 0xffffff801a4ce4ad
    0xffffff80602dba60 : 0xffffff7f9bab8654
    0xffffff80602dbb60 : 0xffffff7f9baa218c
    0xffffff80602dbbb0 : 0xffffff7f9baa20e2
    0xffffff80602dbbd0 : 0xffffff7f9ba73554
    0xffffff80602dbc00 : 0xffffff7f9aa8d470
    0xffffff80602dbc40 : 0xffffff7f9aa8d3df
    0xffffff80602dbc60 : 0xffffff7f9aa926ec
    0xffffff80602dbcf0 : 0xffffff7f9aa8af20
    0xffffff80602dbd20 : 0xffffff7f9aadacc7
    0xffffff80602dbd70 : 0xffffff801a833b9b
    0xffffff80602dbdc0 : 0xffffff801a862d57
    0xffffff80602dbe30 : 0xffffff801a497cef
    0xffffff80602dbe80 : 0xffffff801a420abd
    0xffffff80602dbeb0 : 0xffffff801a410448
    0xffffff80602dbf00 : 0xffffff801a4195fb
    0xffffff80602dbf70 : 0xffffff801a4a5ad6
    0xffffff80602dbfb0 : 0xffffff801a4ced13
          Kernel Extensions in backtrace:
             com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000->0xffffff7f9aab8fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
             com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aad8 000->0xffffff7f9addafff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
             com.apple.GeForce(8.0)[4B9BE287-5251-398E-96B0-BB16C9BFB2D9]@0xffffff7f9ba72000 ->0xffffff7f9bb34fff
                dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aa d8000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    12B19
    Kernel version:
    Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
    Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
    Kernel slide:     0x000000001a200000
    Kernel text base: 0xffffff801a400000
    System model name: iMac8,1 (Mac-F227BEC8)
    System uptime in nanoseconds: 26349024446
    last loaded kext at 22534854703: com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2 (addr 0xffffff7f9c489000, size 12288)
    loaded kexts:
    com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2
    com.apple.driver.AppleHDA          2.3.0f2
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
    com.apple.iokit.IOBluetoothUSBDFU          4.0.9f8
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleMuxControl          3.2.6
    com.apple.driver.AppleBacklight          170.2.3
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.GeForce          8.0.0
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.2.6
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleIRController          320.15
    com.apple.iokit.SCSITaskUserClient          3.5.1
    com.apple.driver.AppleFileSystemDriver          3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.2.1
    com.apple.driver.AppleFWOHCI          4.9.5
    com.apple.driver.AppleUSBHub          5.1.6
    com.apple.driver.AirPortBrcm43224          600.36.17
    com.apple.iokit.AppleYukon2          3.2.3b1
    com.apple.driver.AppleAHCIPort          2.4.0
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleUSBEHCI          5.1.5
    com.apple.driver.AppleUSBUHCI          5.1.5
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleACPIButtons          1.6
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.6
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.driver.DspFuncLib          2.3.0f2
    com.apple.iokit.IOAudioFamily          1.8.9fc9
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.nvidia.nv50hal          8.0.0
    com.apple.NVDAResman          8.0.0
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleHDAController          2.3.0f2
    com.apple.iokit.IOHDAFamily          2.3.0f2
    com.apple.iokit.IOSurface          86.0.2
    com.apple.iokit.IOBluetoothFamily          4.0.9f8
    com.apple.driver.AppleGraphicsControl          3.2.6
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.AppleSMC          3.1.3d11
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.2.0d16
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.1.5
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOATAPIProtocolTransport          3.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IO80211Family          500.15
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOAHCIFamily          2.2.0
    com.apple.iokit.IOATAFamily          2.5.1
    com.apple.iokit.IOUSBFamily          5.1.6
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.8.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          344
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.6
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 2 GB, SMC 1.30f1
    Graphics: NVIDIA GeForce 8800 GS, NVIDIA GeForce 8800 GS, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.16)
    Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
    Serial ATA Device: WDC WD5000AAKS-40YGA1, 500.11 GB
    Parallel ATA Device: MATSHITADVD-R   UJ-875
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1a100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
    USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1002, 0x1d100000 / 2
    USB Device: Trackball, 0x046d  (Logitech Inc.), 0xc404, 0x1d120000 / 4
    USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x0204, 0x1d110000 / 3

  • I have a sonos music system that does not yet work with Lion and will not for about 3-weeks.  I need to uninstall lion and go back to snow leopard, how do I do that?

    I have a Sonos music system that is not yet compatible with Lion and will not be for several weeks.  How do I uninstall Lion and go back to Snow Leopard?

    While we all have MacBooks only a few have Lion. There's a Lion Support Community. You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

  • Install Disk for Snow Leopard will not boot on an iMac 27in

    My Install Disk for Snow Leopard will not boot on my iMac 27in. The Apple Logo is the only thing the user will see. The current OS on the system is 10.6.6. Upon placing the Snow Leopard DVD in the system, the DVD players spins for a few seconds and displays the Apple Logo. Nothing happens after 20 minutes.

    Yes, it is ridiculous how it is impossible to install Snow Leopard. I have two Snow Leopard DVDs: one that I purchased for a Macbook soon after it's release (10.6.0), and one that came with my iMac (10.6.4). Both of these boot up my Macbook (running 10.6.7) just fine. My SL 10.6.0 DVD mounts onto my iMac (Lion 10.7.0), but you cannot run the install. I attempted to boot from this DVD and got the infinite white screen and Apple logo, as some have reported above. The other SL 10.6.4 DVD will not even mount in Lion, and will not even show up as a bootable drive when I attempt to select it after holding alt/option on reboot.
    I created a bootable external drive from SL 10.6.0, attempted boot, same infinite white screen/apple logo.
    I created a bootable external drive from SL 10.6.4 on my macbook. I attempted to boot from this drive, and got the white screen of death, except that this time I actually got the loading symbol underneath the Apple logo. After about a minute of attempting to boot, the Apple logo changed to a circle with a diagonal line through it (the "NO!" sign).
    I took my iMac to the genius bar. They inserted SL 10.6.0, which would not boot. Then they determined that my computer had to run 10.6.4 and later. So, they restored an image of SL 10.6.4 onto my partition (not an install from an image, but an image of SL already installed). Hurray! Snow Leopard was successfully shoved onto my iMac!
    I then deleted a third partition on my hard drive I did not need anymore, which somehow screwed up my SL partition (even though it said "Will not erase partition SL or Macintosh HD). Now I am back at square one, and I guess I need to take my flippin iMac back to Apple for them to do what I should be able to do.
    I like Apple, but sheesh do I hate Lion right now.

  • RE: HP XP Media Center 2005 Ed will not boot from HP System Restore CD's

    RE: HP XP Media Center 2005 Ed will not boot from HP System Restore CD's.
    The following instructions about  the "Code Purple" error FAILED. Error is still present.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ***PLAIN ENGLISH QUICK AND EASY FIX FOR ALL SYSTEMS****
    ***Windows 7 code purple or Windows Vista code purple***
    With the code purple error on the screen, press shift+f10 (the shift key and the F10  key (at the top of the keyboard) at the same time) to open a little screen called a  command prompt. (So, you get a little black screen with white text that says something  about your Windows verison first and a little ways down you'll see "C:\>".   It's all  ready for you to start typing.)
    Type the following line, just as you see it here...
    notepad C:\hp\bin\checkdmi\checkdmi.cmd
    so it will look like this
    C:\>notepad C:\hp\bin\checkdmi\checkdmi.cmd
    Press Enter.
    You will see the text for the file listed in a window using a simple text editor.
    Go to the beginning of the text. Press enter to make a space. Type this...
    goto cleanup
    So, whatever comes after, the first line looks like this...
    goto cleanup
    Save the file and exit notepad and restart your PC. You are good to go.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    RESULT: Same error and problem.
    So, NOW THE SCENARIO IS THIS...[ And A CHALLANGE TO ALL HP Software EXPERTS]
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    1. The PC will not boot the System Restore CD's
    2. The Original OS install and [HP_RECOVERY] disk sector has been severely damaged by
    all of the following:
        A. Massive Virus Infections as shown by Kaspersky Virus Scan and cleaned up.
        B. The user had originally updated the pc to Vista Business Express Upgrade
            (Supplied by HP with the original purchase and warranty).
             (Prior to the upgrade, Media Center was working correctly.)
        C. The original OS product key(XP Media Center Ed. 2005) has been changed by the Vista Business Express upgrade.
        D. The destructve recovery done by PC-Doctor has done user file damage(s).
        E. All software, and possibly hardware could be corrupted & damaged by viruses,
        incomplete recovery, and the unknown failures and conditions.
    To sum up, the system is locked in an unknown state, waiting for expert help.
    (I can allow and manage to let someone diagnose, repair remotely using another OS  i.e.Linux Opensuse 12.1, or XP Home ed if needed.)
    SO IF YOU THINK YOU ARE UP TO THIS CHALLANGE, SEND MESSAGES TO DAVHPForum anytime. Thanks in advance!
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

    Hello @DAVHPForum,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how you are not able to boot your computer using the HP system restore CDs, and I would be happy to assist you in this matter!
    If you are not able to recover your system by following the steps in this document, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • HT3964 I have a MacBook Pro that will not boot up. The apple symbol   Read more: I have a MacBook Pro that will not boot up. The apple symbol is there and a spinning wheel continues to spin. Any options??

    I have a MacBook Pro that will not boot up. The apple symbol is there and the spinning wheel keeps spinning. Any idea how I can fix this?

    Reinstall OS X.
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    OR
    Reinstall Snow Leopard without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • I have a powerPC 8500 that will not boot up.

    I have a powerPC 8500 that will not boot up. Lights come on, drives spins up and nothing. Any ideas? It has been sitting in storage for years. I would like to get some info off it.

    If you wish to do further testing to insure it is the PRAM battery at fault before ripping into the computer, there are a couple of things that always worked for me if the battery was really the problem:
    1) Zap the PRAM--cold boot and immediately press and hold these four keys simultaneously:
    command
    option
    p
    r
    Keep holding until you here a total of three (3) startup chimes, then let go the keys. NOTE: In some Mac models, the second and third start-up chime tone during a PRAM zap can be rather quiet. Either crank up the volume, do the zap when the room is quiet, of use headphones to be sure you are hearing teh tones.
    2) See if the computer will boot from a system disk by holding c during boot. The disk can be a full retail install disk, a system restore disk supplied with the computer, or a utility disk like DiskWarrior or TechTools that allows booting. If the computer boots and you get video, you can feel confident that the only thing needed is a PRAM battery. You can do a hot boot back to the hard drive and the computer should work as long as someone doesn't unplug it again.
    However, if neither of these work, that can mean something more sinister than a PRAM battery has gone walkabout.

  • Reset Password - System does not boot from DVD

    My System: Macbook Pro - 2Ghz Intel Core Duo - OS X - 10.6.8
    Hi everyone,
    i forgot my password. So i want to boot from install DVD to reset the password. Unfortunately my macbook pro does not boot from DVD (10.6.3).
    I press c all the time...but sometimes the macbook pro throws the DVD out...and sometimes nothing happens.
    The DVD drive is working fine...
    Any other idea?
    Thanks in advance.
    Fabian

    So when you boot holding option it shows a padlock with a password field? Is that correct?
    In that case we're talking about the firmware password, which you can't reset via the install disk. There is only one way to do this, I'm not certain if one is allowed to divulge that information publicly - might want to try googling "reset firmware password"

  • Bi_document maintained for system SAP_BW is not a repository

    Hello,
    In our Portal system, we recently applied SPS 15 (using JSPM and also via NWDI). After we applied, when we login to portal system (integrated with BI) and try to load/save BI documents, we get a pop up window saying "Property missing". Looking at error logs we see this
    ========================
    Error in System Administration --> Monitoring --> Knowledge management --> Component Monitor --> Repository Managers :
    error for bw_document 
    Configuration Error:  Missing attribute: cacheid_lock, configuration node = component-config, location = config://local/cm/repository_managers/bw_document
    error for bw_metadata
    Configuration Error:  Missing attribute: cacheid_lock, configuration node = component-config, location = config://local/cm/repository_managers/bw_metadata
    ==========================================
    In the Portal System landscape, i have made sure that the prefix for BI document, KM and repository is "/bi_document" (without quotes) and also in the Repository manager above, the bw_document and bw_metadata also has the prefix as "/bi_document" and "/bw_metadata" respectively.
    =========================================
    We also see this error in the trace file
    "Directory /bi_document maintained for system SAP_BW
    is not a repository; only the highest level is being used in the configuration"
    =========================================
    We have opened OSS message, but SAP could not come back with anything yet. Any help is much appreciated.
    Thanks a lot in advance
    WR

    Hi WR,
    did you find a solution? We have the same error
    Thank you
    Best Regards

  • Finder Searches for Files That Do NOT Contain Certain Words

    Is it possible to do a search in the Finder for files that do NOT contain a certain word?

    As far as I know you can't do that. It would be lovely to pipe the results of one search into another....
    What happens is if you specify a type folder, then exclude a file system name, the command excludes folders that have the word in their name.
    You may want to take a look at this:
    http://developer.apple.com/documentation/Carbon/Conceptual/SpotlightQuery/index. html
    See the section on "Query Expression Syntax" and the one on "Spotlight Metadata Attributes Reference" (click link, then click the link in the Introduction to the section). Most the other stuff is of interest mainly to programmers, but those two sections are actually useful to regular folks.
    Francine
    Francine
    Schwieder

  • This website is driving me crazy.   All I need to do is to contact a real body for help that is not listed.

    This website is driving me crazy.  All I need to do is to contact a real live body for help that is not listed.
    This shouldn't be that difficult.  GRRRRR

    Post DETAILS about the help you need here and someone may be able to help... some questions to get you started
    From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
    •You MUST use an account with Administrator Privileges to run Premiere Elements
    •(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
    •What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
    •What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
    •Has this ever worked before?  If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.?  Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
    •Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
    •What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
    •If you are getting error message(s), what is the full text of the error message(s)?
    •What were you doing when the problem occurred?
    •What other software are you running?
    •Tell us about your computer hardware. How much RAM is installed?  How much free space is on your system (C:) drive?
    And some other questions...
    •What are you editing, and does your video have a red line over it BEFORE you do any work?
    •Which version of Quicktime do you have installed?

Maybe you are looking for

  • Error when use Crystal report Bundled Version with Vs2003 on Windows Vista

    Post Author: MartinoLuccarelli CA Forum: .NET Hi,  I have developed a software with Vs2003 that uses Crystal report Bundled Version.   I have created a Installation package that include the merge modules,   and i have entered the Licence Key for Crys

  • My website doesn't open/start youtube video, after link clicked. In Firefox only.

    On my Joomla project (running under xampp local host) has a link to a youtube video, which worked fine, but not anymore. After clicking it, the resized pop-up window (java script) doesn't open the video. Window remains black and status beam at the wi

  • Is ios 8 easier to read than ios 7?

    I never updated my ipad to ios 7 because of poor contrast issues and too thin font.  I am visually impaired and was unable to read anything in ios 7 even with all visual accessibility options on.  Is the font easier to read in ios 8?  And is there be

  • Applet running .dll

    I want my applet to load a C library (a .dll file). But when i execute it, it throws a SecurityException. I tried to modify the java.policy file, but it dint work. I also tried to sign the Applet, but it did not work. Maybe i did something wrong. My

  • ITunes refuses to work..getting and error

    When I click to open iTunes it says that I have missing files and to reinstall iTunes. I've done that and it keeps saying it. I've d/l an older version of iTunes, newest version, older version of quicktime, newer version. Nothing is working. Any idea