Setup cannot find the Geforce4 4200 device

Hello,
I've just bought a Geforce4 4200 128MB MSI card which replaced my old voodoo3 3000 card.
The BIOS seem to be able to communicate with the card as the card name shows when I turn on the computer.
The problem is when I try to run the CD's setup program , it says "cannot find the device in your system".
When I tried to view PCI information in linux , it printed out the following:
"bus 1 , device 0 , function 0
VGA compatible controller: PCI device 10de:0254 (nVidia corporation) (rev 163)
IRQ 11." , and some more infromation regarding memory addresses.
I'm running win95 on Celeron III 600MHz.
Is the above PCI information makes sense? Why cant the windows installation find my device?
Thank you for your responses,
Ishai

remove any device from system that has something to do with v. card...and all "unknown devices", reboot and try again. if not install drivers manualy...may be will work

Similar Messages

My airport utility says it cannot find any airport wireless devices, even though I am accessing the net via my wifi. What's up with this?

My airport utility says it cannot find any airport wireless devices, even though I am accessing the net via my wifi. What's up with this? Also, I cannot connect to my Photosmart b209a printer, though a different computer - same Macbook Pro can. I tried redownloading the software, but in the setup I get a "device not reachable" message: "However to continue configuring the device in network, your Mac must have access to the device. So please make sure that your Mac has access to the Network ..." I've checked my network on the system preferences and it's properly connected. I'm on the net as I do this. Tis very frustrating, and any assistance woud be appreciated.

Airport Utility is for administration of genuine Apple Base Stations. If you have a different Brand, Airport Utility can do nothing for you.
I think they're using ethernet.
To connect a Printer via Ethernet, no password is needed.
We already tried the password for the internet and that did not work...
If a password is required to connect to the Internet, then WiFi is likley being used, and that WiFi password is the one needed for the Printer connect wirelessly as well.
What make&model Printer? Is it indeed a Wireless Printer? Most connect via USB, but that would force it to use a specific computer to assist in printing.

How can I sync my photo contents in iPhoto on my iMac to my new iPAD's iPhoto? I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but I cannot find "phone button" under Device name on iTunes page. Please help! Thanks!

I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but after physically connecting iPAD with iMac with USB or via WiFi I still cannot find "phone button" under Device name on iTunes page. Please help! Thanks!
I have been creating a photo book using a lots of photographs on iPhoto, and then I took another photos by using new iPAD which I want to integrate with the original album/book on iMac. I was able to import them from iPAD's iPhoto to iMac's iPhoto. However I cannot import or transfer or sync anything from iMac's iPhoto to that of my iPAD.
So my iPhoto page on iPAD contains only 3 or 4 newly created albums, and no other info. That means no syncing....
I am supposed to be able to work on this project on either of these iPAD and iMac, correct?
I am puzzled. I appreciate for your advice and help.
Thank you!

It doesn't appear under the iPad device on the left-hand sidebar of iTunes, you need to select the iPad device on the sidebar and then select the Photos tab on the right-hand side of iTunes e.g.
And then on the right-hand side :

I cannot find the sync options that has "add a device" on firefox, all I find is "syncronizing" under tools and when I click on it I get how to set up

''dupe of https://support.mozilla.org/en-US/questions/915557''
I cannot find the "sync options" on my firefox desk top. I can only find "Syncronise now" under tools. I am trying to find "add device" where is it

Sorry about that, it should work now: [http://support.mozilla.com/en-US/kb/How+to+sync+Firefox+settings+between+computers#browser=fx35 How to sync Firefox between computers]

HT5262 My first time backing up my iPhone 4. I cannot find the page on my computer that shows File Device Backup. I need step-by-step

My first time backing up my iPhone 4. I cannot find the iTunes page on my computer that shows File>Device>Backup. I need step-by-step instructions, please!

Hey Jilleemay,
Thanks for the question. You may need to enable the iTunes menus for Windows:
iTunes: Turning on iTunes menus in Windows 8 and 7
http://support.apple.com/kb/HT5610
To do so, press Control-B on your keyboard. You should then see the menubar at the top of iTunes (see image below). You can then access the File menu and backup your device.
Thanks,
Matt M.

HT4623 I have an iPhone 4S that i dont use anymore. It is locked with a password & i can't remember the password. i am wanting to let my child use this phone now but when i connect it to my computer it says that it cannot find the device driver. How can i

I have an iPhone 4S that is locked with a password & cant remember password. when I connect to my computer it says that it cannot find the device driver. How can i fix this?

Hello jlb1977,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Best of luck,
Mario

I can drag music from my Itunes library to my device on my computer but I cannot find the music on my actual device.

I can drag music from my Itunes library to my device on my computer but I cannot find the music on my actual device.
Any help here?

Restore the old computer's library from a backup, or follow the instructions here or here.
(109578)

During iCloud setup, I was notified that an email was sent to my mail account for activation. I cannot find the e-mail.

During iCloud setup, I was notified that an email was sent to my mail account for activation. I cannot find the e-mail.

Put in a request for another verification e-mail to be sent to you.
Start here, change your country if necessary and go to manage your account.

Labview executable error - system cannot find the file specified

Hi
I am trying to create a stand-alone application and I'm getting the error message below:
"System cannot find the file specified"
This error message occurs when I run the setup.exe. Does any one know why this is happening? I've also attached the error message screenshot.
Thanks
Attachments:
Specified file error.png ‏34 KB

What type of hardware are you using? What do you mean by stand alone? Are you using any RIO device? (Just trying to understand)
The best solution is the one you find it by yourself

Bitlocker "The system cannot find the file specified"

I am trying to get Bitlocker working on the C: drive of a Dell Venue 11 (5130) 32bit, running Windows 8.1Update Enterprise. I click Turn on BitLocker and the system checks the perrequisites and is happy. Then I type in a PIN (6 numbers) and confirm it and
hit Set PIN. At this point it fails with a message saying "The system cannot find the file specified".
I am an Admin on the machine. TPM is working fine. GPO is not setting either BitLocker or TPM to store on the AD DS. Secure Boot is turned on in BIOS. Plus I've tried the reverse of all of these.
I've spent hours reading through web articles without any joy, so I'm hoping someone can give me a pointer. Please.

Hi guys,
Almost have the same problem, and still not able to solve it now [despite lots of search].
I used to have BitLocker working on my laptop, but I removed it before cloning [with Paragon] my SSD to a new and bigger one. When I replaced the SSD the system did not boot, and I had to create a new BCD store by copying UEFI boot files from the system
directory on fix the UEFI boot partition. When the boot problem was fixed, I used gParted to extend my C: partition and delete useless recovery partitons at the end of the drive. So actual partitioning is as follow [as per Diskpart]:
Partition ### Type                Size         Offset
Partition 1         Recovery         500 MB   1024 KB
Partition 2         System            300 MB    501 MB
Partition 3         Reserved         128 MB    801 MB
Partition 4         Primary            930 GB    929 MB
So I guess I made something wrong when I tried to repair the UEFI boot partition... Well, now it boots correctly, but I can't enable BitLocker anymore and get the not-so-explicit "The system cannot find the file specified" error you had. Here is
what I get with a "bcdedit.exe /enum ALL":
Firmware Boot Manager
identifier              {fwbootmgr}
displayorder            {bootmgr}
                        {d10304b6-5db7-11e4-bf1c-806e6f6e6963
                        {d10304b1-5db7-11e4-bf1c-806e6f6e6963
                        {d10304b2-5db7-11e4-bf1c-806e6f6e6963
                        {d10304b4-5db7-11e4-bf1c-806e6f6e6963
                        {d10304b3-5db7-11e4-bf1c-806e6f6e6963
                        {d10304b5-5db7-11e4-bf1c-806e6f6e6963
timeout                 0
Windows Boot Manager
identifier              {bootmgr}
device                  partition=\Device\HarddiskVolume2
path                    \EFI\Microsoft\Boot\bootmgfw.efi
description             Windows Boot Manager
locale                  en-gb
inherit                 {globalsettings}
default                 {current}
resumeobject            {4496c237-5dd0-11e4-be46-f1ba631dfb0b
displayorder            {current}
toolsdisplayorder       {memdiag}
timeout                 30
Firmware Application (101fffff)
identifier              {d10304ae-5db7-11e4-bf1c-806e6f6e6963
description             Setup
Firmware Application (101fffff)
identifier              {d10304af-5db7-11e4-bf1c-806e6f6e6963
description             Boot Menu
Firmware Application (101fffff)
identifier              {d10304b0-5db7-11e4-bf1c-806e6f6e6963
description             Recovery
Firmware Application (101fffff)
identifier              {d10304b1-5db7-11e4-bf1c-806e6f6e6963
description             SATA HDD:
Firmware Application (101fffff)
identifier              {d10304b2-5db7-11e4-bf1c-806e6f6e6963
description             USB CD:
Firmware Application (101fffff)
identifier              {d10304b3-5db7-11e4-bf1c-806e6f6e6963
description             USB FDD:
Firmware Application (101fffff)
identifier              {d10304b4-5db7-11e4-bf1c-806e6f6e6963
description             USB HDD:
Firmware Application (101fffff)
identifier              {d10304b5-5db7-11e4-bf1c-806e6f6e6963
description             NETWORK:
Firmware Application (101fffff)
identifier              {d10304b6-5db7-11e4-bf1c-806e6f6e6963
device                  partition=\Device\HarddiskVolume2
path                    \EFI\Microsoft\Boot\bootmgfw.efi
description             Windows Boot Manager
Windows Boot Loader
identifier              {current}
device                  partition=C:
path                    \Windows\system32\winload.efi
description             Windows 8.1
locale                  en-gb
inherit                 {bootloadersettings}
isolatedcontext         Yes
allowedinmemorysettings 0x15000075
osdevice                partition=C:
systemroot              \Windows
resumeobject            {4496c237-5dd0-11e4-be46-f1ba631dfb0b
nx                      OptIn
bootmenupolicy          Standard
detecthal               Yes
Resume from Hibernate
identifier              {4496c237-5dd0-11e4-be46-f1ba631dfb0b
device                  partition=C:
path                    \Windows\system32\winresume.efi
description             Windows Resume Application
locale                  en-gb
inherit                 {resumeloadersettings}
isolatedcontext         Yes
allowedinmemorysettings 0x15000075
filedevice              partition=C:
filepath                \hiberfil.sys
bootmenupolicy          Standard
debugoptionenabled      No
Windows Memory Tester
identifier              {memdiag}
device                  partition=\Device\HarddiskVolume2
path                    \EFI\Microsoft\Boot\memtest.efi
description             Windows Memory Diagnostic
locale                  en-gb
inherit                 {globalsettings}
badmemoryaccess         Yes
EMS Settings
identifier              {emssettings}
bootems                 No
Debugger Settings
identifier              {dbgsettings}
debugtype               Serial
debugport               1
baudrate                115200
RAM Defects
identifier              {badmemory}
badmemorylist           0x10007
Global Settings
identifier              {globalsettings}
inherit                 {dbgsettings}
                        {emssettings}
                        {badmemory}
Boot Loader Settings
identifier              {bootloadersettings}
inherit                 {globalsettings}
                        {hypervisorsettings}
Hypervisor Settings
identifier              {hypervisorsettings}
hypervisordebugtype     Serial
hypervisordebugport     1
hypervisorbaudrate      115200
Resume Loader Settings
identifier              {resumeloadersettings}
inherit                 {globalsettings}
I also enabled Fast Bios and ACHI Mode in my BIOS [along with enabling Secure Boot on UEFI mode], as well as tried to clear TPM and reinitialize it, but that didn't change anything. And thanks to your posts I had a look to C:\Windows\System32\Recovery\ReAgent.xml
but it does not seem to be populated with the any GUIDs:
<?xml version='1.0' encoding='utf-8'?>
<WindowsRE version="2.0">
<WinreBCD id="{24b2af92-fddf-11e1-bfa1-001377e67dbe}"/>
<WinreLocation path="\Recovery\WindowsRE" id="0" offset="254619418624" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}"/>
<ImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}"/>
<PBRImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}" index="0"/>
<PBRCustomImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}" index="0"/>
<InstallState state="1"/>
<OsInstallAvailable state="0"/>
<CustomImageAvailable state="0"/>
<IsAutoRepairOn state="1"/>
<WinREStaged state="0"/>
<OperationParam path=""/>
<OsBuildVersion path="9600.16384.amd64fre.winblue_rtm.130821-1623"/>
<OemTool state="0"/>
<IsServer state="0"/>
<DownlevelWinreLocation path="\Recovery\WindowsRE" id="0" offset="1048576" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}"/>
<IsWimBoot state="0"/>
<ScheduledOperation state="5"/>
</WindowsRE>
Nevertheless I have a ReAgent_Merged.xml1 file in that same folder, which contains:
<?xml version='1.0' encoding='utf-8'?>
<WindowsRE version="1.0">
    <WinreBCD id="{24b2af8c-fddf-11e1-bfa1-001377e67dbe}"/>
    <WinreLocation path="\Recovery\WindowsRE" id="0" offset="1048576" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}"/>
    <ImageLocation path="\recovery\WindowsRE" id="0" offset="1048576" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}"/>
    <OsInstallLocation path="\RecoveryImage" id="0" offset="231720616448" guid="{f2ebfdb1-aa8c-453d-9c40-68aed6c32395}" index="1"/>
    <CustomImageLocation path="" id="0" offset="0" guid="{00000000-0000-0000-0000-000000000000}" index="0"/>
    <InstallState state="1"/>
    <OsInstallAvailable state="1"/>
    <CustomImageAvailable state="0"/>
    <IsAutoRepairOn state="1"/>
    <WinREStaged state="0"/>
    <OperationParam path=""/>
    <OsBuildVersion path="9200.16384.amd64fre.win8_rtm.120725-1247"/>
    <OemTool state="0"/>
    <BootKey state="0"/>
    <IsServer state="0"/>
    <ScheduledOperation state="4"/>
</WindowsRE>
So I'm stuck, and any pointer would be greatly appreciated. :-/
Cheers,
Kwansetsu

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

Receiving error message 'Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.'

I started getting this error message for the first time today. When I look in the event log I see it every time anyone tries to sync to a mobile device to the exchange server. I've also had this problem trying to connect using
Outlook. I believe it is an IIS issue but I'm not absolutely sure so I'm posting this in the Exchange forum as well.
The event viewer has the following information...
3008
A configuration error has occurred.
5/1/2014 10:41:08 PM
5/2/2014 5:41:08 AM
7539d8a38c8b47869eda3f1749aba08d
1
1
0
/LM/W3SVC/1/ROOT/Microsoft-Server-ActiveSync-75-130434828686436855
Full
/Microsoft-Server-ActiveSync
C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\sync\
SERVER
16284
w3wp.exe
NT AUTHORITY\SYSTEM
ConfigurationErrorsException
Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
https://remote.testserver.com:443/Microsoft-Server-ActiveSync/default.eas?User=user.name&DeviceId=ApplC39GQ5xxxxxx&DeviceType=iPhone&Cmd=Ping
/Microsoft-Server-ActiveSync/default.eas
174.224.130.31
False
NT AUTHORITY\SYSTEM
24
NT AUTHORITY\SYSTEM
False
at System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) at System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) at System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) at System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) at System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) at System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
I have tried most, if not all, of the different post's suggestions to no avail.
The steps I have taken are as follows...
1. Repaired .Net 4 (Both the client and extended)
2. Uninstalled and reinstalled .Net Framework 4.0.
3. Verified that the dll exists.
4. Checked the applicationHost.config file. It contains the follow statement...
<add name="ServiceModel-4.0" type="System.ServiceModel.Activation.ServiceHttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0"
/>
5. Changed the following line in web.config to include the runtimeVersion...
<add name="ServiceModel" type="System.ServiceModel.Activation.HttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0" />
6. Executed aspnet_regiis.exe -iru from the ...\Framework64\v4.0.30319 directory.
7. Went to inetpub\history to use an applicationHost.config file from yesterday but it only has history from 9PM tonight. It probably had what I needed before I started changing it tonight.
I still receive the same error message.
Like I said everything was working yesterday. In fact I didn't hear or see any issue until after 1PM today.
Any help would be very appreciated!

Hi,
Please confirm whether users can access their mailboxes from Outlook Web Access or not. We can do the following changes to have a try:
1. In IIS > Application Pools, change the .NET Framework Version to v2.0 and restart IIS service.
2. If it doesn’t work, explore the Default Web site.
3. Renamed the web.config file to web.config.old
4. Reset IIS using iisreset command to have a try.
Thanks,
Winnie Liang
TechNet Community Support

"Windows cannot find the microsoft software license terms" Windows 8.1 Installation Error - Parallels

I'm trying to install Windows 8.1 via Parallels on my Macbook Pro.
I create a new VM and use the .ISO file and get the error: "Windows cannot find the microsoft software license terms. Make sure the installation sources are valid and restart the installation."
I found this question was answered here: http://social.technet.microsoft.com/Forums/windows/en-US/b1021d66-9774-4b5b-b50b-ad860c5ecc89/windows-8-enterprise-rtm-installation-error?forum=w8itproinstall
However, following the steps of the solution did not work for me. I created a blank VM and chose Windows 8.1. After this, it asks me to insert the installation disc. I cannot figure out how to use the .ISO as the source at this point. I tried copying and
pasting the path to the file and dragging the file to the VM, but no luck.
If there is a way I can install this without this error message or by somehow getting the path to the .ISO that'd be perfect.

Hi,
According to your description, I would like to confirm if you have unchecked the Express installation box.
Be sure to uncheck 'Express Installation' when installing, otherwise Windows setup will fail with an error "cannot find license terms" and get stuck in a reboot cycle.
I suggest you refer to the following link to use Parallels Desktop to install Windows 8.1.
Using Parallels Desktop to install Windows and the dev tools on your Mac:
http://msdn.microsoft.com/en-us/library/windows/apps/jj945424.aspx
Regards,
Kelvin hsu
TechNet Community Support

Cannot Install this Hardware - The system cannot find the file specified.

I got an 8G ipod touch last week. When I plug it into USB port on my PC, a Found New Hardware Wizard box pops up with "Cannot Install this Hardware", "There was a problem installing this hardware: Apple Mobile Device USB Driver", "An error occurred during the installation of the device", "The system cannot find the file specified.", "Click Finish to close the wizard.". If I go ahead and click finish, the device disappears and a couple of seconds later tries to install again and the box pops up again. However, if I leave the box alone, the ipod does actually appear in itunes and I can sync music to it, so all is not lost Any ideas though how to stop this error box popping up? The USBAAPL.SYS driver exists - I don't know what file it cannot find. Thanks.

Hi and welcome to Discussions,
if you have a Leopard OSX DVD you can use it to install the BootCamp 2.0 drivers and later use the BC Update 2.1 for XP to further update the drivers.
If not (still running OSX Tiger) there are two possibilities:
use this direct download link for the latest ATI/AMD Mobility Driver package http://ati.amd.com/online/mobilecatalyst/
or use the ModTool found here http://www.driverheaven.net/modtool.php in conjunction with the ATI/AMD Desktop Driver package.
You should also consider getting and installing the latest (June 2008) DirectX 9 package from Microsoft.
Hope it helps with your gaming problems.
Stefan

Oracle Access Manager Configuration : Cannot find the Person Object Class

Hi,
I am trying to install OAM , I am getting the following error when i am configuring the Identity server for the first time.
1) I have installed OID. I am using one OID for both config and user data.
2) I have installed Identity server and have modified the OID schema automically during installation.
3) I have installed web pass.
I have gone to the url: http://trn-ps-oid.oracle.com:7777/identity/oblix
Here i gone to Identity System Console to configure Identity server.
Following are the config data i have given
Configuration DN : dc=mydomain,dc=com
Search Base : dc=mydomain,dc=com
Host : mypc.mydomain.com
Port Number : 389
Root DN : cn=orcladmin
Root Password : *******
Directory Server Security Mode : Open
Is the Configuration data stored in this directory also : Yes
Person Object Class : inetorgperson
Auto configure objectclass : yes
Group Object Class : groupOfUniqueNames
Auto configure objectclass : yes
After this I have clicked on the restart server button.
It comes back to the page asking to enter Person Object class details.
I Get the Error : Cannot find the Person Object Class.
I have checked the object class in OID it is there, I have verified the connection details are also correct.
Any Ideas what might be wrong.
Earlier during setup i had to modify the OID schema, how do i check if this has been done.
Any Ideas

<?xml version="1.0" encoding="utf-8"?>
<ValNameList
xmlns="http://www.oblix.com"
ListName="setup.xml">
<NameValPair
ParamName="mainOIS"
Value="true"></NameValPair>
<NameValPair
ParamName="currentStep"
Value="LDAP_CONFIG_CHANGES"></NameValPair>
<NameValPair
ParamName="status"
Value="incomplete"></NameValPair>
<NameValPair
ParamName="whichDB"
Value="OID"></NameValPair>
<NameValPair
ParamName="dataDirCopied"
Value="TRUE"></NameValPair>
<NameValPair
ParamName="machineNo"
Value="localhost"></NameValPair>
<NameValPair
ParamName="portNo"
Value="389"></NameValPair>
<NameValPair
ParamName="rootDN"
Value="cn=orcladmin,cn=Users,dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="ldapRootPasswd"
Value="**************"></NameValPair>
<NameValPair
ParamName="securityMode"
Value="Open"></NameValPair>
<NameValPair
ParamName="oblixUserDataSame"
Value="Yes"></NameValPair>
<NameValPair
ParamName="searchBase"
Value="dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="configDN"
Value="dc=mydomain,dc=com"></NameValPair>
<NameValPair
ParamName="obClassPerson"
Value="inetorgperson"></NameValPair>
<NameValPair
ParamName="defaultConfigForPersonOC"
Value="true"></NameValPair>
<NameValPair
ParamName="obClassGroup"
Value="groupOfUniqueNames"></NameValPair>
<NameValPair
ParamName="defaultConfigForGroupOC"
Value="true"></NameValPair>
<NameValPair
ParamName="obOldClassPerson"
Value="inetorgperson"></NameValPair>
<NameValPair
ParamName="obOldClassGroup"
Value="groupOfUniqueNames"></NameValPair>
</ValNameList>

Setup cannot find the Geforce4 4200 device

Similar Messages

Maybe you are looking for