Setup could not be started because of unexpected error

Have tried to load icloud several times. I Keep getting error that "setup could not be started because of unexpected error. Can anyone help? Thanks.

You need to leave more information like what is the ios5 device. I following instructions accidently set up two iclouds and then I couldn't get the contacts in. My mobileme email isn't going to work anymore because I set up an icloud using my store apple ID. Apparently the term apple ID can refer to any apple product ID that you make up not the one you use in the store. So you need to leave more infor on what is your problem to figure out how to help.
GR

Similar Messages

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

I have a pop up window that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61). What does that mean?

I am using a portable USB storage drive connected to my laptop. I am trying to delete a file from the USB drive but it is not working. A pop up window appears that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61)". What does that mean and how do I fix it? Thank you.

All I can tell you is that is a write permissions error. How is this drive formatted? Check the file's permissions. You can try:
Open the Terminal application in the Utilities folder. At the prompt enter:
sudo rm -rf
Leave a space after "-rf" and drag the file into the Terminal window. Press RETURN. You will be prompted to enter your admin password which will not be echoed.

My iTunes opens in safe mode but when I try to sync my ipad? It says apple mobile device service could not be started because an unknown error occurred 1084

It says apple mobile device service could not be started because an unknown error occurred 1084

I figured it out on my own, and it was an odd fix. I added a password to my account in users, and then made Apple Mobile Device service log in through my account, and now it works.

Setup can not be started due to unexpected error? Outlook 2007

Please help! I'm trying to setup icloud and it synced with my iphone and ipad but not my Outlook 2007. I keep getting the message above... Help!!

I found a "solution" in amongst the discussion threads of downloading iCloud v1 which I did and it seems to work now. The issue does indeed seem to be with v2 of iCloud. I'll waste no more time now...
http://www.tomsguide.com/us/download/Tableau-de-bord-iCloud-Pour-Windows-,0313-4 3841.html
wher e you can still find v1

Operation Could Not Be Completed Because An Unexpected Error Occured (Error Code -50)

Hi, I'm trying to copy files to my external drive. (3TB - Formatted to Mac OS Extended (Journaled)) and I keep getting this error. I have been looking it up on Google and in the forums and it seems the common problem is that the drive is formatted Fat32, which mine is not. The files I'm moving are between 1-3 GB each. This was all working fine until yesterday, and now I can't get it to work. I recently deleted some music files from the drive, but the trash has been emptied and is clean as far as I can see. I can move things off of this drive or access them on the drive just fine, I am just not able to add new files, but there is plenty of room to do so - (2.75 TB of free space.)
Any help would be appreciated.

Try partitioning the drive. If you can't do that either, it's malfunctioning. Try another cable. Failing that, you may be able to salvage the drive mechanism by removing it from the enclosure and installing it in another one.

What is wrong? : "Could not initialize Photoshop because an unexpected end-of-file was encountered." Photoshop CC 2014

What is wrong? : "Could not initialize Photoshop because an unexpected end-of-file was encountered." Photoshop CC 2014

Please check following links if they are useful:
Unexpected end-of-file
Photoshop CS6 Not Loading: Actions & Preferences Errors
Two Fatal Error Messages when Starting Photoshop
Regards
Rajshree

Could not initialize Photoshop because an unexpected end-of-file was encountred.

I have a problem with Photoshop, I can run it and work in it. After the start of reports this error message: Could not initialize Photoshop because an unexpected end-of-file was encountred.
I do not know we mopped PC, defragment, and uninstall of Photoshop installed. You do not know what to do?

Try resetting your preferences. If that doesn't work, consider a complete uninstall and reinstall.

I have this message today: Could not load actions because an unexpected end-of-file was encountered.

i have this message today and I don’t know what to do, I have PS CC : Could not load actions because an unexpected end of file was encountered

See whether a reset of Preferences solves the problem
A logical next step would be to reset your Preferences.
To reset Preferences:
If Photoshop is already open on your screen, close it (Quit). Then hold down Shift+Ctrl+Alt (Win) / Shift+Command+Option (Mac) on your keyboard and start Photoshop.
A dialog box will pop up asking if you want to delete the existing Preferences file (the "Settings"). Click Yes in the dialog box. The existing Preferences file will be scrapped and a new one will be created.

Win8 Pro Hyper-V Error : Virtual machine could not be started because the hypervisor is not running

Hello,
Recently in Dec I bought a new desktop PC.
HP ENVY Desktop h8-1420t
CPU & ChipSet: Intel Core i7 Intel Z75
I have Windows 8 Pro and installed Hyper V but cannot start the virtual machines. I get the following error message: Virtual machine 'zzzz' could not be started because the hypervisor is not running
I followed these steps to enable Hyper-V:
1. Upgraded to Windows 8 Pro
2. Tried to add Hyper-V feature but Hyper-V Platform was grayed out
3. Enabled Virtualization in the BIOS - security configuarion
4. Cold booted Computer
5. Added the Hyper-V Platform Feature
6. During the restart machine was in forever state spinnign state, did a manual reboot
7. Disabled Virtualization in the BIOS again
8. Successfully Re-Booted the Computer now Hyper V manager was available
9. Configured Hyper V network to use external network
10. Created a new VM through the Hyper-V Manager
12. Tried to boot up teh newly Created VM and I get this error message:
Virtual machine 'zzzz' could not be started because the hypervisor is not running
Any solutions for the error I am seeing above?
Similar problems are discussed here:
http://h30434.www3.hp.com/t5/Desktop-Lockups-Freezes-Hangs/Cannot-boot-if-HP-ENVY-Bios-Virtualizatio...
Thanks!!

Same Problem Here - did you discover any answers? I may have to return the system if it can't do hyper-v

The SAPinst GUI could not be started because a Java Runtime Environment

Hi all,
I AM TRYING TO INSTALL THE ECC 6.0 ON HPUX AND WHILE STARTING SAPINST GETTING THIS ERROR:
The SAPinst GUI could not be started because a Java Runtime Environment (JRE) could not be found.
Either the JRE is not installed correctly or the environment variable SAPINST_JRE_HOME is not set to the JRE installation home.
Be aware the SAPinst server is still running! You need to start SAPinst GUI standalone on this or another host as described in the installation guide.
103 controller.errorStartingGuiUnix 1697
Please help

Can you do a
java -version
as root?
Did you install the Java runtime from http://www.hp.com/go/java for your platform?
Markus

I can´t initialise photoshop because of this Could not load actions because an unexpected end-of-file was encontered. "Could not initialise Photoshop because the preferences file was invalid (it has been deleted)" how can i fix it?

I can´t initialise photoshop because of this Could not load actions because an unexpected end-of-file was encontered. "Could not initialise Photoshop because the preferences file was invalid (it has been deleted)" how can i fix it?

I have a MacBook Pro.
App - Adobe Creative suite 5.5
The only app that does´t initialize is the photoshop
Problem solve
FAQ: How do I reset my preferences?
Thank you Jeffrey Tranberry

Could not load actions because an unexpected end of file was encountered, resetting preferences doesn't work, whats next? PC windows 8 PS CC

I tried the ctrl alt shift and click yes to delete preferences and it didn't work. Where are my actions? I have no issues with disc space etc (over 500 free) Any help is greatly appreciated as I have many edits to get to customers

Have you taken a look at this thread? Could not load actions because an unexpected end-of-file was encountered.
Benjamin

Virtual Machine could not be started because the hypervisor is not running

Hi
I have installed Windows Server 2012 Standard Edition with a GUI. Default configuration, nothing special.
Whenever I want to turn on any machine inside of Hyper-V, the following error message appears:
"Virtual Machine could not be started because the hypervisor is not running"
Whenever this happens, I run the following command:
bcdedit /set hypervisorlaunchtype Auto
and reboot the Server. After a reboot, all Virtual Machines can be started without Problems. However, as soon as I shut down the Server instead of rebooting it, the Problem happens again and I need to enter the command again and reboot.
Now my question is how to solve this Problem. I never had this Issue with Windows Server 2008 R2, maybe there are some differences regarding the Hypervisor in Server 2012. How can I make sure the Hypervisor is always on, even after a Shutdown? Thanks in
Advance

Hi,
Please check whether you have event log with ID 3112.
Hyper-V requires hardware support, including: an x64 CPU; VT (Intel) or AMD-V (AMD) hardware extensions; No eXecute (NX)/eXecute Disable (XD) and full BIOS support for hardware virtualization.
Check if the computer meets the hardware requirements, use the appropriate utility for your CPU manufacturer.
If the computer meets the requirements for Microsoft virtualization software, see the video titled
Hypervisor is not running error: How to fix
, which demonstrates how to change the system BIOS on a computer to enable support for virtualization. Make sure DEP and CPU virtualization is enabled in BIOS. (http://go.microsoft.com/fwlink/?LinkId=163578
Also, check that
Boot Configuration Data (BCD) store is set to start the hypervisor, and then restart your physical computer.
The BCD store contains boot configuration parameters and controls how the operating system is started in Windows Vista and Windows Server 2008 operating systems. These parameters were previously in the Boot.ini file (in BIOS-based operating
systems) or in the nonvolatile RAM (NVRAM) entries (in Extensible Firmware Interface-based operating systems).
You can use the Bcdedit.exe command-line tool to update BCD store with the correct launch options as referenced in the error, and then restart the server. Bcdedit.exe is located in the \Windows\System32 directory by default.
For more information please refer to following MS articles:
Event ID 3112 — Hypervisor Operation
http://technet.microsoft.com/en-us/library/dd581879(v=ws.10).aspx
You receive the error message "virtual machine could not start because the hypervisor is not running" in Windows Server 2008 or Windows Server 2008 R2
http://support.microsoft.com/kb/2490458
Troubleshooting Event ID 3112 "The virtual machine could not be started because the hypervisor is not running."
http://social.technet.microsoft.com/wiki/contents/articles/194.hyper-v-troubleshooting-event-id-3112-the-virtual-machine-could-not-be-started-because-the-hypervisor-is-not-running.aspx
Lawrence
TechNet Community Support

The server process could not be started because the configured identity is incorrect

Good morning
I have the same problem as here, every moning i must writing pasword.
https://social.msdn.microsoft.com/Forums/en-US/f95ee480-dda1-42fd-96af-596531e7ac2e/the-server-process-could-not-be-started-because-the-configured-identity-is-incorrect?forum=windowstransactionsprogramming
But my configuration is the same as was answer in this post, may be you can help me with another idea?. Thanks.
Windows 2008 R2 64Bit

Both machines start with an automatic login so technically there is an interactive user.
Nevertheless, it is an interesting point. i will try to configure the applications to run under a particular user and see if that changes anything.
Thank you
Peter

Setup could not be started because of unexpected error

Similar Messages

Maybe you are looking for