Setup different printer as default in different location in SAP via Citrix

hi all,
i have two location, where the user of SAP B1 uses B1 via Citrix,they have different printer at their respective location, i need to do the setup for two printer one for normal print anather for barcode printer.
Both have two printer in their respective location. how to make the printer setup on both the place in SAP B1, so that those two printer should come as default for both of them. here they have two different user access. but how to do the setup of printer on user basis, so that it can take the two printer as default, on both the location.
kindly suggest me some idea that how to do that
regards
sandip

Sandip,
I remember seeing this post from you before. I would urge you to follow up on your posts and check the replies before posting them again. This is mainly because if you keep posting the same questions again inspite of getting answers you might lose credibility in getting replies. I am saying this in your best interest.
Please see my reply for your previous message
As per what I know you can setup a default Printer for a document (PLD). Also for your situation you should save the same PLD with two different names and default one to each user. Now you have two PLD's for two of your users.
Open the first PLD template and from the design mode of PLD.
In the Top Menu
Print layout designer > Display document properties -- go to Paper format tab and select the Printer you want the document to print for this PLD user.
Do the same for the other user.
I am not sure how this will work in a distributed environment where you are using CITRIX. Please check with your Network associate.
Thanks
Suda

Similar Messages

How to Setup a JSP to Run on Different Physical Location than OC4J Defaul

I am trying to setup a development environment for jsp application development in Oracle 9ias Release 2 for a development group. I followed the steps outlined in NOTe:167960.1 using both EM Website (creating a OC4J and editing server.xml and defau*.xml files) and DCMCTL (Doc ID: 185635.1) utility. OC4J app is coming up only partially which does not work.
Is this possible to "Setup a JSP to Run on Different Physical Location than OC4J Default Home" in Oracle 9ias Release 2 ?
Appreciate insight
Thanks
Subu

I was finally able to get it up and running... I commented out all the apple specific lines in smb.conf until I was able to successfully finish the driver copy process via the Windows driver wizard. The line in the /etc/smb.conf which was causing this weird problem was:
vfs objects = notify_kqueue,darwinacl,darwin_streams
I have no idea what this line is about. However after commenting it out the driver installation immediately started to work. I cross checked it by adding the line again and viola the problem was back - so it can be broken down to this line...
As I've found some other comments to this line in the internet I guess I will go for the smb.conf changes described in this article:
http://blog.djmnet.org/2009/02/09/macs-needing-unix-network-geekery/
Cheers
jogi4mac

Error The PC and the printer are connected to different networks

Hi,
I'm trying to set up my C4580 on my laptop, but I'm getting the following error after the diagnostic test:
The PC and the printer are connected to different networks(237DB2A87D and 66616B65). They must be connected to the same network. This can happen when you use the manufacturer's default network name (SSID) and another nearby network is using the same name.
My setup is a Linksys router WRT546, my laptop is conntected wireless to the router. I have two other desktop computers that are directly connected to the router. Both the desktops are able to connect wireless to the printer. My router SSID name is 'Blair Office' with WPA security.
I get a internet connect fine with the laptop, but can't get the new printer to setup.
I saw another post that talked about 'Print the C45** Network Configuration Page', but not sure how to do this
Thanks
Diane

This reply may be late for this user, but it might be helpful for any current users.
I managed to change the modem's IP address to match that of the printer. In my case the printer worked fine wirelessly until I moved to a new place and installed a new modem. Here is what I did to solve the problem:
1. At the printer, click on the wireless button, wireless settings, print network configuration page. This will print a page with the printer's IP address (in my case: 192.168.0.13)
2. I accessed my modem via the internet browser, typing 192.168.1.1 (this is one of the default addresses (192.168.0.1 is also common). Default user and password is admin (usually). There I changed the modem's IP address to 192.168.0.1 and the range to start at 192.168.0.13 (my printer's IP address).
3. I saved the settings (the modem will reboot and you will be offline, it may take some 20 seconds before the modem is visible again).
4. Reconnect to the modem and check if internet is still working. Then try to install the printer again.
This worked for me after I read several other postings.
Good luck!

Why is a color print from CS5 so different from the same image in CS4?

I have made prints from the same file using CS4 and CS5, and the prints from CS4 are showing what I think is good color. My monitor is calibrated, and I have always been quite happy with prints from CS4. When I make prints of the same files using CS5, the color is terrible compared to the CS4 print. I am using the same printer, same sRGB color space and all the settings in the "Print" dialog windows. I make sure the Color Handling box is set to "Photoshop Manages Colors" and I then go to the "Page Setup" box and make sure Color Settings is set to Off (No Color Adjustments). I am using a New MacPro Quad-Core Intel Xeon with 16 GB ram. I did notice that Apple Software Update did install Epson drivers after I installed CS5 Creative Suite 5 Design Premium. The color using CS5 looks the same starting in either 32 bit or in 64 bit. Another thing I notice is that printing on an Epson 2200 Stylus and using their 13x19 paper that the prints are being cropped to 5/8 inch into the full screen size of the images. I.E. The prints are losing 5/8 inch of what I see on the 30" Apple monitor. in both dimensions of the screen image. This cropping effect is showing now using CS4 and CS5. I have "Position" checked for Center Image, and Scale to Fit Media is also checked. I've been using PS since version 2 and have always been quite happy with the prints from my Epson printers and the prints from my Photo Lab, but the prints I am getting using CS5 are terrible. All the settings are the same in both the CS4 and CS5 "PRINT" windows.
HELP!!!! :-)

I have tried all of these things. I have checked and double-checked the print dialog. Sheet after sheet of paper goes by. Ink, at $40 per tank, is wasted. Results are still wrong. I followed your video. You use an Epson printer. I use an HP. Different print dialogs. different results. Whatever worked in previous PS versions does not work now. PS CS5 requires new settings to get the results that match what was determined by years of evolution and fine-tuning.
I set up all of those print dialog parameters but it required an adjustment layer or two to get the results I got using previous Photoshop. So I could do that with every image I printed with good results using previous versions. There is nothing out of gamut in these images, so I don't have unrealistic expectations about more saturation in the prints. Anyway, it's an 8-color printer that can handle a pretty wide gamut compared to a 4-color.
Wade, I know you are trying to help but this finger-wagging "error in your ways" and "you need to change your ways" stuff is patronizing. I did "change my ways" and try everything in your video. All was not well on the paper. I'm glad it worked out for you but it didn't for me. Accept it. I'm not some novice hobbyist still getting the hang of Photoshop. I've been using Photoshop since version 2. Adobe changed something in CS5. I haven't seen Chis Cox or any Adobe staffer jump into this discussion and say otherwise. Maybe there are no answers from the folks who should know the most about it. Maybe they're working on it.
It's not the first time Adobe has broken a tool. Anyone remember what happened to Outline Stroke in Illustrator CS2? It had previously made a path that could be edited by selecting points but after CS2, it was broken. Illustrator made a filled path that was nearly impossible to edit with all of the overlapping points. It was finally fixed in CS4. It's hard to understand how a useful tool that functioned properly in every version since it was introduced became an unusable mess. Maybe that's the case with PS CS5 and printing.
With 4,300+ posts in 14 months, maybe Wade has more time to tinker and tell us about it. I don't.
Or I could just print in CS4. At this point it's not that important to spend several days of testing to be able to say that CS5 can print my legacy stuff that was created and printed with various color profiles over a 12 year period. Maybe a more disciplined approach to color management would be a good way to work in the future when creating images, I'm dealing with tried-and-true printable images that were not done that way.
As long as Adobe doesn't make me give up CS4 to use CS5, I'll use it for printing.

How do I add a print button that would print out pdf or different version than what is on the site?

I see this example on NY Times. If you pick any of their articles and click print or do the short cut (Command-P) ... (Control-P for windows), the layout of their article is completely customized and cleaner. It seems like they've edited the print look to be different than what you see on the website.
I find that very cool and something I've bent dying to achieve. My guess is that I could make a pdf to what I want the print look to be and have a print button read that instead of the website but I don't know, I need help with this.

I have but it's not what I'm looking for. I want to edit what the printer will actually print when a reader clicks print. So if the page has a puzzle, for example, and the reader clicks print. The printer will print the puzzle in a different location on the page without some of the clutter that's on the site or have some message that's not originally present on the website.

Problem in starting rmid in a port different than the default one

hi all,
i am experiencing exceptions in running rmid in a port different than a default one.
if i run
rmiregistry 2000
rmid -J-Djava.security.policy=policy
java -Djava.security.policy=policy -Djava.rmi.server.codebase=<mypath> -classpath <myclasspath> com.myclass.ActivatableRMI <host:port>
everything works fine
but if i try to specify a port in which rmid should be started, then i have exceptions...
can anyone tell me how to solve my problem? i am running NT 4.0
thanx and regards
marco

If you start rmid at port other than the default one
(1098) with -port option, it is necessary to set the
system property "java.rmi.activation.port" to this
port.
Rmid internally starts a local registry service
(LocateRegistry.createRegistry(port)) and binds the
RMI activation system server object with this registry
service like Naming.rebind("//:" + port +
"/java.rmi.activation.ActivationSystem",
activationSystem);. Activation system provides a means
for registering groups and "activatable" objects to be
activated within those groups. When a activatable
server object is exported, it is registered with this
activation system, so it should get the stub to the
activation system which is started as part of rmid.
ActivationGroup class provides a static function
getSystem() to get the reference to the activation
system stub. Now it makes use of the system property
"java.rmi.activation.port" value to contact the
registry service where activation system registered
itself under the name "//:" + value of
java.rmi.activation.port +
"/java.rmi.activation.ActivationSystem". If this
property is not set, it uses the default port 1098.
-- Srinath MandalapuThis is an awesome and lovely forum answer (and I saw srinath_babu reply to another similarly in my search), but I would like to ask for just a bit of clarification.
My question is simply making sure I understand the reply above in my own terms...
Suppose that right now my program involving activatables is already working with default port 1098, but that I wanted or needed to change to another port for rmid. Then is this statement true?
- IF the commandline which which I start rmid specifies port xyxyx,
- AND IF I added -Djava.rmi.activation.port=xyxyx to the commandline with which I run the setup for my Activatable (i.e. the program that calls Activatable.register method),
- THEN my code will still work as is (i.e. I wouldn't have to change my existing code to specify the port anywhere in it)?
(If I am not understanding this correctly, please let me know!)
Thanks very much,
/Mel

How to make different print jobs from one PC

Hi
We have a problem to make 2 different print jobs at same printer with one PC.
We use Adobe Acrobat X Standard or Acrobat Reader 9 both no sucess.
we want following
1. print A4
2 Print A6
Program find out itselw when to print A4 or A6 from different location at the same printer or at 2 different printers.
Bothe print 1 and 2 is PDF file.Print 1 is for invoices - print 2 is for labels
Is that posibel with Adobe?
BR
Flemming

Hi and welcome to the RoboHelp forums. You may be better placed to ask this question on the Acrobat forums as I expect knowledge about printing PDFs would be limited here. However I suspect that you'll need to set-up different Print Options inside Acrobat to do what you want. This is not my area of expertise though.
The RoboColum(n)
@robocolumn
Colum McAndrew

Need to print same outputs at different printers

Is there any way we could have the output directed to a different printer. A sales order confirmation output needs to print at printer ABC for user Sam, and printer xyz for user Jude. What configuration change would allow printing of outputs at user specific printer.
Any suggestions

if it is printing immediately , yes it is possible. In the user profile( T Code SU01) have default printer assigned , which ever you want to print for specific user and click on output immediately. when the order is saved then it will print to the printer maintained in the user profile.
If batch program , then itwill be difficult
Regards
Sai

Printing a copy of a report to a different printer

I want the users to be able to print a copy of a report to a
different printer than their default windows printer (the
printer is on the network).
This goes to the correct printer ok, but the formatting of the
report is ruined, losing all lines and boxes, and changing the
font from arial to character based.
Any ideas?

Hi John,
Generally, if we copy a report and paste it under Report Server Project, the pasted report should be the same as the original one. In your scenario, are you add some expressions on visibility property in the second report? If we conditionally flip the Hidden
property of a textbox or column in the report, data renderers will automatically omit this data from export, even if the expression evaluates to False (False meaning “don’t hide”). This is a by-design behavior.
If you directly remove some columns from the second report, then the issue could be caused by others. To troubleshoot this issue, we can compare those two files with their XML code to find the difference. Just right-click the report name, then select
‘View Code’ to see the XML code. Or recopy the report to test the issue again.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to generate & publish webhelp html files in different folder than default folder

Hi All,
I am new to robo help. I have a requirement to generate & publish webhelp html files in a different folder than default folder.
Could anyone please tell me the steps to change the folder
Thanks
Rashmi

You change the generate folder and filename in the first field on the first page of the wizard. It must be a folder on your hard disk.
You change the publish folder in the last page of the wizard. Anywhere you like.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Different print mode behavior between 1.5 and 1.6.

We recently upgraded to 1.6. There seems to be some behavior that is working differently now(no other changes made).
Here is the situation:
I have a tabular report of projects with a link column that allows the user to go to a page of each project's detail. The column link has a passed in P50_PROJECT_ID that the detail select uses. The detail page has some general project detail information like name, project manager and this is displayed as items in an HTML region. The items are populated by a process that fires before header and selects the information INTO the item variable(:P50_PROJECT_NAME, :P50_PROJECT_START_DATE...etc). There are also two tabular reports based on SQL queries to display milestones and issues for the project. These are based on queries that have the WHERE clause using the incoming :P50_PROJECT_ID.
On the detail page, and all other pages in the app, I have a Print navigation bar entry. This navigation entry target type is "Page in this application" and Page is &APP_PAGE_ID. Printer Friendly is checked on.
The app was built with 1.5 and when the user went to the project detail page and clicked the Print link, it worked fine and showed all the data. After we converted the APP to 1.6, after the user selects the PRINT nav item, the page is re-invoked and the detail data shows up fine but the tabular reports show with NO DATA.
It looks like I can fix this by changing the Print navigation bar item to SET P50_PROJECT_ID with &P50_PROJECT_ID and it works fine but I'm not sure that's the way to do it since the PRINT nav item is used on many pages(that may not use the P50_PROJECT_ID) and I'd like to know if there is a reason it's not working now and worked before?
Any input is appreciated!
Thanks,
Paul

Hi,
I haven't used Java 6 yet, so I don't know about the performance improvements, but I don't find it strange.
Calculations using floating points can give different results in different VM versions and on different platforms. You should declare the class to use strictfp if you want to get the same result on all implementations (that is of course slower)
http://en.wikipedia.org/wiki/Strictfp
Kaj

How can i print reports to different printer by use Trigger on table after insert

Hello,
Please can any one tell me how can i print (any message) to different printer (network & local printer) by use Trigger on table after insert.
regards,
Linda.

What you want to do cannot be done with PL/SQL, which does have any print utilities. However you could write something using Java Stored Procedures.
Of course the "different printer" bit will have to be data driven as triggers are not interactive.
rgds, APC

Leading in Pages. I've just discovered that different typefaces seem to have different auto-leading in Pages. I am used to default leading being 120% of point size, but it seems this is not so any more. The same text in 10pt Times New Roman, which I would

I've just discovered that different typefaces seem to have different auto-leading in Pages. I am used to default leading being 120% of point size (or some consistent rule), but it seems this is not so any more. The same text in 10pt Times New Roman, which I would expect to line up with 10pt Palatino, for example, doesn't. I've tried using the inspector, at least to get both faces to behave the same for given settings, but I haven't been able to. How much control does Pages allow for this type of settings, and are there any hidden secrets as to how to do so? Many thanks
Message was edited by: Just me then

If you set the line spacing in the inspector to Exactly and 12 points for 10 point type, it will work the way you want.

"Try Selecting a Different Printer or File Type" Error - iPad2 - Officejet Pro 8600 - ePrint error

Greetings...
I just got an Officejet Pro 8600 and I've been trying to get web pages to print using HP ePrint from my iPad 2 (iOS 7.0.6). I go into the ePrint app, go to web page of choice, and then click on my printer option to print. It renders on screen and then throws out the following error:
"Try Selecting a Different Printer or File Type" "Officejet Pro 8600 [5124FC] doesn't support this file type."
I can use ePrint from the iPad to print pictures from camera roll.
This only is problematic when I try to print web pages (I tried amazon.com for test).
I have no problems doing this from my iPhone...only the iPad.
I've tried rebooting device and trying again....same thing.
Anybody know how to fix this? I really want to be able to print web pages from my iPad.
Thanks in advance...
Possie

Hello Possie,
Thank you for the update. I have to say I'm surprised and disappointed that the uninstall and reinstall did not resolve the issue, especially since you can print the page from your iPhone.
I have spent some time researching this and working with my colleagues in HP's Cloud Services and we have a couple of suggestions/questions.
Do you get the same error when you try to print the web page using Apple's AirPrint feature?
Please ensure the iPad is connect to your home wireless network and try to print again.
Please try changing the settings in the ePrint app before printing the web page. Please ensure that the paper quality is set to normal (see screen shot below) and that the paper size is set to letter (see 2nd screen shot below).
Please let us know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I want to connect to a network printer hp cp1518ni with different versions of windows (win7& winxp)

I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp) . My pc with win 7 work ok but the pc with win xp not "see" the printer on the network. What is the additional driver should I install?
thanks
This question was solved.
View Solution.

Hi @OHIMATAS,
I see by your post that you are unable to network the printer to the Windows XP computer, but the Windows 7 computer is connected. I can help you with this.
Make sure the Windows XP computer is connected to the correct network name, not a Guest network either.
Print a configuration page to get the printer's IP address.
Printing a Configuration Page.
Try and access the printer's Embedded Web Server on the Windows XP computer.
Type the IP address into your web browser's address bar. (Internet Explorer)
Did it load the webpage?
If you can't access the printer's EWS, then check the IP address on the computer to see if the first 3 sets of numbers match the printer's IP. They have to match to be on the same network.
Go to start, type run in the search box, type in cmd, then type ipconfig.
Check the IPV4 address.
Now check the IPV4 address for the printer.
Do the first 3 sets of numbers match?
Try and ping the printer.
In the same window, type ping printers IP address (space between ping and IP address)
What are the results?
Run the add printer wizard through printers and faxes, if you were able to access the printer's EWS.
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Setup different printer as default in different location in SAP via Citrix

Similar Messages

Maybe you are looking for