Setup document for FSG

Hello,
I have little idea about FSG but i couldn't map the balance sheet/Trial balance/Profit & loss...so kindly send me any document for setup....It will be big help
Thank you in advance@@

You can refer the below FSG whitepaper
https://community.oracle.com/servlet/JiveServlet/downloadBody/912237-102-1-28873/FSG%20Setup.PDF

Similar Messages

Anyone has setup document for R12?

Hi all,
Does anyone has setup document for R12 in any modules like PO, OM, INV, AR, AP or GL?
Thanks,
FAN

Hi,
What setup documents you are referring to?
Oracle Apps documentation can be found at:
Application release 11i and R12
http://www.oracle.com/technology/documentation/applications.html
For AIM documents, please refer to:
AIM Methdology
Re: AIM Methdology
Regards,
Hussein

Functional Setup Document for OTL

Hi,
Can some one please suggest the OTL functional setup document that simplify me the things need to do to setup the OTL.
Thanks,
Madhav

Oracle EBS documentation can be found at -- http://www.oracle.com/technetwork/documentation/applications-167706.html
Thanks,
Hussein

Best Way to Setup Document for Colored Paper Job

Hi, we're running a business card job that will print on a red-colored paper (well, white & red duplexed for a white front & red back).
Curious to know the best way to set this up for both soft-proofing here, and to send the most appropriate files to the printer. We'll separate out the backs of the cards that print on red into their own document (since the fronts will run on white).
On these backs, there will be a background image that is a colored grayscale image with the foreground being a darker PMS red than the paper color (for a bit of a tone-on-tone effect). And the type will be engraved with opaque white.
- Should I change the 'Paper' color to a CMYK simulation of the paper color?
- Or is it better to setup a 'background layer' set to not print and filled with the red paper color?
- How exactly should I setup the opaque white for the type? I think if I left Paper as white, applying the Paper or default white swatch would not set the type to print using a spot color, it would just knock it out, correct?
THANKS! Don't do this too often.

Ultimately for print production you will need the opaque white as a spot color, so create a spot swatch 0C, 0M, 0Y, 0K. As for the background image that you are printing on red stock, I would create a layer for the red stock, set the image on another layer that has a multiply effect, and this could be used for the proof. The print file, you would not need the layer for the red stock, and you wouldn't need the image to multiply either.
Why not just print a solid red with reverse type, instead of an opaque white on colored stock?

Setup docs for oracle learning management

hi gurus... plz can u help me with setup documents for oracle learning management??
it is urgent plz any help will be much appreciated!!!

Hello Scorpion,
If you're asking about the Oracle documents for OLM, they can be found here under "Learning Management/Training Administration" for e-Business Suite 11i:
download.oracle.com/docs/cd/B25284_01/current/html/docset.html
Alwyn

How to stop document posting when filling setup tables for logistic app.

Hello Boys
I've read several threads and weblogs about data extraction from logistic applications i.e the ones which uses the infosources like 2lis_13_vditm, 2lis_02, 2lis_03, etc, etc,and now almost every thing is clear to me but one thing: how do i actually "close the system" while the process of filling setup tables i.e MC03BF0SETUP, MC03BX0SETUP, MC13VD0ITMSETUP, are running?
So I have some questions
1) which is the procedure to prevent users from posting documents for an specific logistic applications (02,03, etc.) in a source system
3) For example when using TC OLI9BW for statistical setup from billing documents (app no. 13), there is a check box "Block all billing documents?". Is this option for such pourpose?
4) Every logistic applications has a different procedure??
thanks (with points of course) for any help
rgds
A. Garduñ

Hi Azael:
Q1: usually the BW team will inform basis/secuity about the deletion and performing of setup tables. they will fix a time after the normal hours where in all users are locked out from the system. in a sense, R/3 will be down for that time.
2. the check box which says, "block documents" is meant to block posting. for eg: you are doing setup tables late in the evening, and you assume that no user is assessing the system, but if there is a user(just by chance) who is doing some posting and when he try to save it, the system will not allow him to do save as you cheked this option.(normally we donot use this)
3. some LO may have different procedures, for eg IM. but most of them have the same functionality.
hope it helps.
assign points if helpful
kalyan

Setup script document for Sourcing implementation

Hi,
Please can one share a setup script document for Sourcing implementation ?
Regards.

Hi Ram,
See wiki page:
General PPDS wiki page
http://wiki.sdn.sap.com/wiki/display/SCM/APO-PPDS
Setup Matrix Generation in a Complex Manufacturing Evironment
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a618c4-8aad-2b10-6ebb-f70cb4470195
Oficial doc
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a618c4-8aad-2b10-6ebb-f70cb4470195?quicklink=index&overridelayout=true
Hope this help.
Luiz Giani

Printers do not show up in Page Setup Format for menu

Hello. I just installed Acrobat 9 Professional. Upgrade from AP7. For some reason, when I go to select the printer in the Page Setup> Format For> dropdown menu, the printers do not show up. When I try to make a pre-set for this printer it never works and always defaults back to Language Level 3, which gives me a postscript error when I try to print. It prints fine at Language Level 2 but I can't get the setting to stay. Any clues???
thank you in advance,
Randy

Geraldine,
There are some oddities in Pages' methods.
What you did was save the changed template which had been altered on the page but you also needed to "capture" and save the Layout or Section over the existing one in the document using the same name to replace it.
I will walk you through making your own version of a template.
1 Open a new document using the template you wish to customise.
2 Don't change anything yet, but open every section from the Sections pull down menu so you have a sequence of pages each with a page of a different section design.
3 Make Master Objects selectable if they are not.  Change each Section to your liking.
4 +Menu > View > Page Thumbnails+
5 Select first Thumbnail in sidebar  +Menu > Format > Advanced > Capture Pages… > Name : Type exactly the same name as the section > It will ask you if you want to replace the existing section > Replace+
6 Repeat this for each section until you have replaced them all.
7 +Menu > File > Save as Template… > Save with a New Name+
8 +Menu > File > New from Templates > My Templates > Choose your New Name template+
You now have a document customised to your design.
Peter

Error while filling setup tables for 2lis_13_vahdr

Dear friends,
I am getting below Error while filling setup tables for 2lis_13_vahdr.
More faulty documents found than the tolerated 0000000000
Message no. M2222
Can any one guide me how to address this issue.
Thanks and Regards
Nithya

Hello Nithya,
It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
While executing OLI*BW including a value in the maintain "No. tolerated faulty documents" - 5000 or 10000.
Then execute the program in background.
Once the job is completed check the background job log if any errors.
Thanks
Chandran

Error while filling setup table for Sales

Dear Team,
We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
application component 11
Error determining rate: foreign curr. local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
Message No M2810
application component 13
Billing document 480050000: error determining stats. currency rate (no updating)
More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
If anybody faced this problem kindly reply to this.
Best Regards,
SG

Hi There,
Might be your using a wrong document number.
I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
If you use vice versa that error will throw.
Regards,
MQ

Need help in creating documents for Contacts in Oracle HRMS

We are trying to add documents to Contacts in Oracle HRMS. (11.5.10.2)
Navigation: Oracle HR Super User -> Fastpath -> Documents of Record
Search for a Contact -> Manage Documents of Record -> Create Document of Record.
In Document Information -> Type is mandatory field but the LOV is not returning any values.
The LOV works fine for both system defined and custom document types when trying to create documents for Employees or External Contractors.
But we would need to be able to add documents for Contacts also.
Please let us know if this expected functionality or if there is any setup that is needed.
Any help in this regard is highly appreciated.
Thanks,
Kiranmayi.

We are trying to add documents to Contacts in Oracle HRMS. (11.5.10.2)
Navigation: Oracle HR Super User -> Fastpath -> Documents of Record
Search for a Contact -> Manage Documents of Record -> Create Document of Record.
In Document Information -> Type is mandatory field but the LOV is not returning any values.
The LOV works fine for both system defined and custom document types when trying to create documents for Employees or External Contractors.
But we would need to be able to add documents for Contacts also.
Please let us know if this expected functionality or if there is any setup that is needed.
Any help in this regard is highly appreciated.
Thanks,
Kiranmayi.

Help - setting up a document for A4 printing

Hi everyone,
I am very new to InDesign - using CS5.5. Trying to set up my first A4 document for printing. I an unsure of the printers settings but just want to check in the document - i need to have my background image right to edge of the bleed (3mm), and any text needs to be kept inside the magenta box - or can it go right out to the black line?
My image isn't quite big enough to go right to the top on the bleed line so i have used the same color rectanlge at the top . . . will this work? You can tell its a differnt image. Needs to go right to the edge of the page.
Is there any I need to do specifically to set this up to be printed ? Thanks for any ideas/suggestions/comments

Bleed is area outside the theoretical trim area of your page and it is used to compensate for misalignments during cutting. A typical bleed would be 1/8" or 3mm and any art or color that is intended to reach to the edge of the page after trimming should extend beyond the page edge (black line) by that amount. Set up the document at the trim size (in this case A4) and then press the more options button in the document setup dialog to reveal the Bleed and Slug fields. Enter the bleed amount and press OK and you'll see a new red guide outside the page boundary. Is this a facing apges document? How many pages? How will it be bound?
I'm guessing the Magenta box woould be the margin guides. These are set by you according to what you want, so there is no hard and fast rule for where they might be. Text and other critical content should always be set inside the page bound at least as much as the bleed allowance, however (and I prefer more), because if the cutting is off it will shift the trim outside the page area on one edge, but also inside the page by the same amount on the opposite edge and you don't want the text to be cut off or crowded at the edge.
If your photo is not large enough to extend into the bleed area you shoud either enlarge it, if that won't reduce the resolution too much, find another photo that is big enough, or redisign the page so the phot itself does not need to bleed. A transition form a photo to a colored background, no matter how similar, is nearly always visible.

Taking long time filling the setup tables for sales and shipment

Hi ,
I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
It took 16 hours just to bring 6 months of sales history data in the test environment .
Cn anybody help on this issue why it is taking that much of time ...
I am trying to load the sales data from R/3 into APO-BW from 2005 to 2007 .......
It is taking 16 hours to fill the data for only 6 months .

Hi,
1. delete data and refill the setuptables again by spliting to several small pieces.
2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
you need to check with PSA and base tables.
keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
correct if i'm wrong.
either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
User exit not a good solution. it's one possibility.
****Assign Points If Helpful****
Regards,
Ravikanth

Dataguard document for R12.1

We plan to implemnet Dataguard on EBS R12.1 (Redhat Linux). I only found document for R12:
Business Continuity for Oracle Applications Release 12 on Database Release 10gR2 - Single Instance and RAC
Doc ID: 452056.1
anyone know document for R12.1 (ORACLE 11G database)?
Thanks.

Hi,
Please refer to the following threads.
Help Required to impliemnt the DataGuard Broker in 11.1.0.7
Re: Help Required to impliemnt the DataGuard Broker in 11.1.0.7
Step to setup the Dataguard in 11.1.0.7
Re: Step to setup the Dataguard in 11.1.0.7
Regards,
Hussein

Best practice document for SRM

Hi all
Is there a best practice document for SRM setup and Qucksizing tool for SRM-MDM
thanks

Hello,
SRM related best practice building block is S60 - Self-Service Procurement (Procure 2 Pay)
Please find the link:
http://help.sap.com/bp_bblibrary/600/html/S60_EN_DE.htm
Hope this will be useful.
Thanks
Ashutosh

Setup document for FSG

Similar Messages

Maybe you are looking for