Setup E-mail settings in developer toolbox

i want setup E-mail settings in developer toolbox.
i use google apps for my site mail.
and use easyphp for localhost.
what is my "mail server" and other parameters?
This
question in Google Apps Discussion Group

Try this:
Email server settings (POP and SMTP)
AT&T email server settings are needed if you intend to use an email program (e.g. Outlook) with your AT&T email accounts. The current settings are displayed in the table below. If you only use AT&T Webmail to access your AT&T email accounts, these settings are not needed and you can access your mail by logging in at https://login.yahoo.com/.
If you signed up for a free att.net email account after 6/12/11, you will not be able to use an email program (e.g., Outlook) with your AT&T email account.
Note: AT&T's POP/SMTP settings have recently changed to inbound.att.net and outbound.att.net. However, if you are using the old settings, they will continue to work.
The following mail server settings will work with all AT&T email domains: @ameritech.net, @att.net, @bellsouth.net, @flash.net, @nvbell.net, @pacbell.net, @prodigy.net, @sbcglobal.net, @snet.net, @swbell.net, @wans.net.
Email Program Settings Field:
Enter:
Incoming (POP)
inbound.att.net
Outgoing (SMTP)
outbound.att.net(requires authentication)
Incoming mail server:
POP3
Incoming/Outgoing User Name:
Full AT&T email address, including domain (e.g., [email protected], [email protected])
Incoming mail port #:
995, secure connection (SSL) checked
Outgoing mail port #
465, secure connection (SSL) checked
Note: When updating the secure server settings, check the SSL check box first and then update the port number if necessary.
Message was edited by: Glenn Leblanc BTW: This comes directly from the AT&T help site. Go to help and search Email Server Settings. The reps should have suggested this.

Similar Messages

HT4864 Which settings do I use to setup iCloud mail on WLM

Which settings do I use to setup iCloud mail on WLM

0003jellybean wrote:
Which settings do I use to setup iCloud mail on WLM
http://support.apple.com/kb/HT4864

Developer Toolbox Send-Email

When I click OK to my SMTP email settings on the Developer
Toolbox, the message:
tNG_config.inc.asp cannot be found in local file list,
appears.
What does this mean?
I'm trying to create a connection between a form, a database
and an e-mail message.
Thank You

Günter,
Thank you for your input after spending all day trying to solve it.
Which I havent for the moment I am going to use a work around by either building an intermediate page where the user can confirm and make changes if necessary and send the email from the update trigger.
Or doing away with using the id field auto number as a job number by inserting a new field where I generate the unique number for the job number.
Regards Paul

The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

10.5.1 Mail crashes OS (black screen) then wipes Mail settings + mailboxes

So I dragged a PDF to the mail icon to start a new message, Mail creates new message body with PDF but then crashes the entire OS - press the on/off to reboot your system.
Then when the OS comes up again the entire Mail settings are wiped.
Okay so I do a restore from the archived Mail.
Spaghetti Mail results.
I've now got two sets of archived Mail (this is a new MacBook so I recently imported old Mails from the iBook) nested inside multiple folders... one set of the original iBook to MacBook import - and now a set of the MacBook mail with a set of the iBook to MacBook import inside it.
Problems I have with this: -
1. Mail crashed my MacBook in the first place
2. Mail forgot the mail settings even though the mailboxes are still in ~/me/library/mail
3. Mail double imported archived mail
4. Mail has no clear and easy way to merge old mail back into a new mail setup.
Now I'm going to resync from the IMAP mail servers to get my INBOXes back... so multiple multiple nests of spaghetti.
This is pretty unacceptable behaviour.
Solution: -
1. Mail should have a back up set of settings to "Clone" settings and mailboxes from an archive
2. Mail should be smart enough to know that the mailboxes in the users library/mail folder are not alien entities but the data it needs to work.
3. Mail should have a way to merge archives into the current set of live mail boxes - SENT especially important.
Now I'll be resyncing then dragging and dropping to try to get it to some normality.
Yes perhaps Time Machine is the answer - but that does not resolve the cloning of settings issue... nor help when moving from 10.4
Awful

Okay - so I've begun restoring the email accounts - I have 5 of them... and it seems to be recognising them and importing the mail from the existing set of mailboxes I'd imported already.
However there is still the issue of Mail recognising that those Mailboxes exist. It should know that they are there and offer to set up the accounts using these mail boxes as a basis.
Not very smart to do it the way it has been done - now I need to delete the archives I've just imported... but that scares me so perhaps I'll just live with them as they are...
Not very impressed with the recovery process.

How do I change incoming mail settings in Snow Leopard Mail?

When I try to change the settings for my Mail app, in Snow Leopard, the incoming mail settings are greyed out. What do I do to be able to change these?
(I had a problem, with my Mail account, which a consultant fixed for me on my laptop. But I cannot remember what he did to access the incoming mail server preferences, and make the changes, because on my desktop these are still greyed out.)

use the mail setup wizard, head over to Mail Community, mobileme ended.
http://www.apple.com/support/mail

Help me : Multifile upload using developer toolbox

hi
i m trying to build a file storage site and i did everything using developer toolbox. and now i stuck up with multifile upload using Development toolbox. please some help how to setup step by step.
Thank you

Make sure you are using the right java card library version (JavaCard and OpenCard version).
Most cards only support jc2.1.2 - in opposite of the emulator which was designed for jc2.2.1.
Jan

Third party E-mail settings

I use work e-mail from home where I use Verizon FIOS for internet connectivity. I've been having problems sending e-mails recently from my work domain. I'm trying to find the most current third party e-mail settings I should use in my Outlook program to be able to send and receive work e-mails on my work domain.
All FAQs I see related to this subject are dated back in 2009. Is that info still correct or is there new information we should be using for third party e-mail accounts. I'm trying to verify not only ports to be used but also proper setup to send e-mail through FIOS on my work domain. Thank you!

As I said the fact that 110 seems to work and 995 doesn't PROBABLY mean you haven't turned SSL on in Outlook (lots of version of Outlook by the way).
The step by steps are described for various version of Outlook on pages off http://verizon.com/emailsettings
The settings are the same in any case and summarized as
Outgoing server smpt.verizon.net 465 SSL plain text password required
Incoming server pop.verizon.net 465 SSL plain text password required
Outlook 2010
Outlook 2007
Outlook 2003
Outlook 2002
And of course it still may be restrictions by your Employer. e.g. my former company blocked ALL email they could except using their EMAIl. They had to under the law as they were required to keep copies of all emails to be presented in case of Government enquires.

How to setup talktalk mail in i mac

how to setup talktalk mail in i mac

thiven wrote:
how to setup talktalk mail in i mac
Using these settings:

Developer Toolbox does not support ColdFusion

Hi,
I just recently find out some functions in developer toolbox do not support ColdFusion. Example in login settings, both restrictions tab and history tab are not available for ColdFusion. Why?
Best regards
Kenneth

Hi Kenneth,
I can´t tell you why exactly the "restrictions" and "history" options are not available on both the ASP and ColdFusion server models. However, they have also not been available with ADDT´s predecessor version "MX Kollection" -- what´s certainly no comfort to you, but that´s all I can say about it.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Developer Toolbox For Dreamweaver CS4

Hello people,
I am searching for Developer Toolbox server side software to add to my Adobe Dreamweaver CS4 sever behaviors. Does any one have idea where I could find/buy this very server side software? please if you do, contact me. I have to have this software to complete my "Social Blog-Network."
Joplateau

Greetings,
May be I have bought some piece of software that has been discontinued; the fact is that Dreamweaver CS4 doesn’t have the server side I wanted or needed. For this reason, I have searched in vain to find and purchase the ASP VBScript server side upload I could use to design image or classified web site.
UltraDev 4 I bought, has this very type of server side or, the server side I am seeking for, if it doesn’t, I could find most of them from the Dreamweaver extension for UltraDev 4 and download them including CDONT MAIL. Unlike Dreamweaver CS4, it is highly impossible to find any. I have also bought “ASP upload and resize” server side software from DWZone.com but it doesn’t work at all and their support is poor. However, if youhave other idea why I shouldn’t use the UltraDev 4 you let me know but they still have supports and I have used most of them to learn how to use Dreamweaver CS4. .
THanks,
Joplateau.

How do I setup additional mail boxes?

How do I setup additional mail boxes?

If you mean additional email accounts then Settings > Mail, Contacts, Calendars > Add Account
If mean email folders under an account, then at the moment you can't do it directly in the Mail app. If it's an IMAP type account then you should be able to login to your account on a browser and create them there, and they should then appears in the Mail app. If it's a POP type account then unfortunately you're stuck with what you've got. With iOS 5 later this year then (from http://www.apple.com/ios/ios5/features.html#more) :
Even add and delete mailbox folders on the fly

Another Dreamweaver developer toolbox question

Hello all,
I want to have my user login box resize itself to the div
that I am
placing it in.
I am using CSS positioning for my layout and find that when
the browser
is resized to a smaller size the login for will overrun the
div that it
is contained in.
Any ideas on how this could be corrected?
Thanks.
Chris

Adobe® Dreamweaver® Developer Toolbox is a set of Dreamweaver server behaviors and commands for creating dynamic web applications using PHP, Adobe ColdFusion®, and ASP VBScript server scripting technologies. This Dreamweaver extension helps web developers create membership-based websites, as well as content management systems, CRM back-ends, and other web-based solutions without requiring advanced programming knowledge.
If you are an advance developer than go a head this tool will really help you in all your projects.
It has too many features which you can take advantage of. Such as : -
- Rapid application development
- Wizard-like interfaces
- User interface persistence
- Database management
- Dynamic lists and forms for website administration
- Upload files and images
On Web Hosting
- Manage database information in your browser
- Rich Internet applications
- Client-side form validation
- HTML form widgets
- Dynamic Spry datasets
- CSS skins for a custom look
- Fresh interfaces and CSS customizable skins
- Multi-browser compatibility
Reason to buy: -
1. Increase productivity
2. Implement client changes in minutes
3. Visual SQL query generation
4. Create web interfaces for database administration
5. E-mail information you need on form submit
6. Create file upload forms on the fly
7. Implement solid user registration systems
What else you want. I hope this help...

I don't understand how to sync settings in mail settings to fill lesser number of emails in my inbox

i don't understand how to sync settings in mail settings to fill lesser numbers of emails in my inbox

OK and when I run desktop manager then what do I do? There are no instructions after this setup with my mobile carrier, they just leave me hanging. Also, is my phone going to be wiped or will it just update the OS? I don't want to lose all my settings that took me hours to setup on this thing and have to redo everything all over again. Backup? I don't understand how to do that either (again all of this is new to me). I don't have a second phone where I can call T-Mobile on the phone and have them walk me through it, I only have my cell that's it. They refuse to give me instructions unless I'm on another phone when I call them, why they won't let me write them down is beyond me...these carriers are getting mighty picky these days on customer service/technical support.

Cant setup e-mail account after updating the SIM c...

I have a Nokia 6790 Slider and Straight talk deleted my phone number by mistake, they ended up having to replace the SIM card and now my email doesnt work
I Click on my @e-mail address(0), It opens the e-mail inbox screen which is empty. I click back and it goes to E-mall Setup Screen. Then it shows Testing Network Connections Then Contacting e-mail server, then I get a screen with E-mail Provider Icons on it Ovi Mail, Yahoo Mail, Gmail, Hotmail, Other. I click on Other, Then A Getting E-mail Settings small window, then a small window with a place to put the E-mail address. I put in my e-mail address and click OK. Then I get Getting E-mail Settings small window, It does this twice then I get Unable to connect to server, Try again Laterin a small window. This is What I have been getting for the past two weeks ever sense you changed my cell phone number and replaced my SIM card.
Other ways I have Tried
I click on Menu, then the Messaging Icon, Then the Email Icon, it goes to E-mall Setup Screen. Then it shows Testing Network Connections Then Contacting e-mail server, then I get a screen with E-mail Provider Icons on it Ovi Mail, Yahoo Mail, Gmail, Hotmail, Other. I click on Other, Then A Getting E-mail Settings small window, then a small window with a place to put the E-mail address. I put in my e-mail address and click OK. Then I get Getting E-mail Settings small window, It does this twice then I get Unable to connect to server, Try again Later in a small window.
I click on Menu, then the Messaging Icon, Then the Set up Email Icon, it goes to E-mail Setup Screen. Then it shows Testing Network Connections Then Contacting e-mail server, then I get a screen with E-mail Provider Icons on it Ovi Mail, Yahoo Mail, Gmail, Hotmail, Other. I click on Other, Then A Getting E-mail Settings small window, then a small window with a place to put the E-mail address. I put in my e-mail address and click OK. Then I get Getting E-mail Settings small window, It does this twice then I get Unable to connect to server, Try again Later in a small window. I have reset the phone back to factory settings, I even reinstalled the phone software and still getting the same thing. I think the problem is that the old email address is stuck in the phones memory and I cant change it. I wander if you can delete it so i can start all over, you would thing setting it back to factory would have done this, but it didnt.
Keith
Using a Nokia 6790 Slider

@Easttexasdragon
Welcome to the forum!
Have you tried going to http://www.ovi.com/services/ Sign In and go to Account and try making your new number (Primary number) and click on the verify and you should receive SMS with embedded link?
When it tries to verify during mail setup it should then reconcile with device.
Happy to have helped forum with a Support Ratio = 42.5

Setup E-mail settings in developer toolbox

Similar Messages

Maybe you are looking for