"Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se
Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa K
Hi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin
Similar Messages
-
Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support -
Windows Server 2013; Exchange Server 2013 with Cumulative Update 1
Cannot install Cumulative Update 3 for Exchange Server 2013. It fails with
[xxx] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory operation failed on . The supplied credential for 'XXX\Xxx' is invalid. See the Exchange setup log for more information on this error.
[xxx] [0] [ERROR] Active Directory operation failed on . The supplied credential for 'XXX\Xxx' is invalid.
[xxx] [0] [ERROR] The supplied credential is invalid.
(Crosses - XXX - replace original values.)
I have found that a few others have experienced the same problem but found no solution, nor could come up with anything myself. If it is any hint, Event 40961 was logged in the Event Viewer around the same time on almost all installation attempts to be purely
conincidental:
The Security System could not establish a secured connection with the server
ldap/xxx.xxx/[email protected] No authentication protocol was available.
Both Windows Server and Exchange Server otherwise work OK, and do not recall any issues with Cumlative Update 1 installation.Hi vhr1,
Based on my knowledge, the Event ID 40961 is a warning message.
This behavior occurs when we restart the server that was promoted to a DC. The Windows Time service tries to authenticate before Directory Services has started.
Found some resources for your reference even if the Exchange Version is mismatched:
http://blogs.technet.com/b/jhoward/archive/2005/04/20/403946.aspx
http://support.microsoft.com/kb/823712/en-us
About the error message, "Setup encountered a problem while validating the state of Active Directory: Active Directory operation failed on . The supplied credential for 'XXX\Xxx' is invalid."
The error message InvalidCredentials means: the wrong password was supplied or the SASL credentials cannot be processed.
Found a similar thread for your reference, hope it is helpful:
http://social.technet.microsoft.com/Forums/en-US/98e26ad6-8e43-4ef5-8ff9-e9fee6e76bda/bind-operation-is-invalid?forum=exchangesvrdeploylegacy
Feel free to contact me if there is any problem.
Thanks
Mavis
Mavis Huang
TechNet Community Support -
When I downloaded a program, it wouldn't open, so I tried to convert it to Adobe reader, now my main browser, Firefox is in the Adobe reader program with others and i can't close Adobe reader, and I can't open any of the other files because they cannot run in Adobe.
When I downloaded a program, it wouldn't open, so I tried to convert it to Adobe reader, now my main browser, Firefox is in the Adobe reader program with others and i can't close Adobe reader, and I can't open any of the other files because they cannot run in Adobe.
-
I've encountered a problem while synching my entire library. After synching I've noticed that only half of my library is playable on my iPhone. And a red circle with a Stop button appears next to the songs that didn't sync. Why is this happening?
media in the itunes lib but not connected when the sync take part will fail in this manner
media in a not supported format on ios will fail to sync
http://www.apple.com/iphone-5s/specs/
Audio formats supported: AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), HE-AAC, MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV
User-configurable maximum volume limit -
Windows Media Player encountered a problem while playing the file...
I am running WMP 11.0.5721.5280. I am running XP SP3 with every update that has come out. I have 4 GB RAM and my processor is a Pentium 4, 2.6GHz.
I have a large collection of music file ripped from my CD collection. Almost every time I want to plat a music file I get a message; Windows Media Player encountered a problem while playing the file, For additional assistance, click Web Help. When this
error box is displayed, a red 'X' placed next to the file in WMP.
When I click the "Web Help" button, I am taken to a MS website (http://windows.microsoft.com/en-us/windows7/c00d11b1) which tells me that I should go to the sound device website and make certain I have the latest driver. All of the advice which
is given does not apply to me. My sound device works fine! I can play CD, DVD (movies), and MP3 files. Even when I use RealPlayer, the same thing happens, but not as frequently.
Can anyone offer a solution to this problem?They'll help you over here.
Windows
XP forums on Microsoft Answers
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help. I can't find my answer on the Internet.
By far the most common problem hardware-wise seems to be scuffs on the aluminium. Yours is the first report of a faulty screen I've seen.
If you use the same Apple ID on both devices it'll sync whatever you want it to - music/apps/photos/messages/etc.
I've just switched from a Galaxy S3 to iPhone 5 (having already owned an iPad for a while) so I'm in a similar position! -
Hi , unfortunately i faced with a problem that i couldent open my audio note so i thought if i delet it and transfer the application from itunse from my pc i can have my files...but all of them deleted from both application and also from wifi address... Is it any solution for recovery the filew? I missed lots of important files , plz help me
Tnx alotHey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated. -
How do I open my itunes account on a new computer without having to buy all new songs? It doesn't seem fair to have to buy all the same songs a second time if they are already purchased by me and I just want them on my new computer!
There's a few different ways. The following document is worth checking through:
iTunes: How to move your music to a new computer -
my old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?
Hello gpbondi,
The following article provdies step-by-step instructions for downloading your purchases both in iTunes and on your devices.
Download past purchases
http://support.apple.com/kb/HT2519
Cheers,
Allen -
The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the Meantime?
Have you tried yesterday's update to iOS8.0.2?
iOS 8.0.2
This release contains improvements and bug fixes, including:
• Fixes an issue in iOS 8.0.1 that impacted cellular network connectivity and Touch ID on iPhone 6 and iPhone 6 Plus
• Fixes a bug so HealthKit apps can now be made available on the App Store
• Addresses an issue where 3rd party keyboards could become deselected when a user enters their passcode
• Fixes an issue that prevented some apps from accessing photos from the Photo Library
• Improves the reliability of the Reachability feature on iPhone 6 and iPhone 6 Plus
• Fixes an issue that could cause unexpected cellular data usage when receiving SMS/MMS messages
• Better support of Ask To Buy for Family Sharing for In-App Purchases
• Fixes an issue where ringtones were sometimes not restored from iCloud backups
• Fixes a bug that prevented uploading photos and videos from Safari
For information on the security content of this update, please visit this website:
http://support.apple.com/kb/HT1222 -
I am having problems loading sampler patches into the exs24 sampler, when i got into edit menu and load multiple samples all the samples r greyed out and i cannot slect them, any help with this would be much appreciated
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left? -
My ipad is disabled and I cannot restore it because the Function Find My Ipad setting was on, and I cannot get in the ipad to turn off the setting in order to restore the ipad. Does anyone know how to solve the problem
Force iPad into Recovery Mode. Follow step 1 to 5 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times. -
Starz PLAY "Windows Media Player encountered a problem while playing this file" error!?!
My laptop running Windows 7 is having the error, " Windows Media Player encountered a problem while playing the file." when trying to play downloaded movies whereas the "live Starz TV" works fine. My netbook is working properly though, anyone seen this before?
- if you're still having the issue, make sure you are running all the latest video/audio codec's for windows media player and win 7 and also take a moment to check this article from microsoft.
http://www.microsoft.com/windows/windowsmedia/player/10/errors.aspx
if you find an answer let us know what fixed it!
buggin wrote:
My laptop running Windows 7 is having the error, " Windows Media Player encountered a problem while playing the file." when trying to play downloaded movies whereas the "live Starz TV" works fine. My netbook is working properly though, anyone seen this before? -
I have the iPhone 4S and I cannot get my apps to download. I will click free then install and then it will ask for my password. Once I enter my password correctly it will verify my password an then it won't do anything. what should I do?
I just went through this same process.... I changed my credit card, double checked billing info, changed my password, I restored my phone, but the misake I made was I kept restoring it from my back up.... Finally I went to Apple Store.. and sad to say that you have to do a restore, and DO NOT restore from back up.
I used Gmail so I didnt loose contacts or email.. but I did loose all my text messages and history of that.
So, I had the EXACT same problem and it was a software issue.. you have to restore your phone to factory settings and start all over.. BLOWS I know!
Maybe you are looking for
-
Options for receiving audio other than onboard mic...
I spent about 8 hrs in my home studio making a really awesome voice mail message for my Verizon account. After I completed my new snazzy message I attempted to record it to my voice mail account. When the phone promoted me to say my message I simply
-
Why Is My Snapshot Smaller Than The Webcam?
I am trying to make a snapshot of the users webcam, but the snapshot is 1/4 the size of the running webcam and doesn't fill the bitmap data section. Also is there a better way I can Add and position the snapshot.? import flash.display.BitmapData; imp
-
Can someone please tell me how to reinstall purchased ringtones on my iPhone?
-
Comment peut-on copier des dossiers de photos sur ipad? L'utilisation de itunes crée un seul dossier qui est automatiquement effacé et remplacé par le tansfert d'un autre dossier!!!
-
I used the migration assistant to transfer fils from my Windows pc to my new MacBook Pro, but the transferred files only show up in a new user created by the assistant I supose and I cannot access them from my user account. Can anybody tell me how to