Setup Error Messages
Hi, There.I just bought my WD 3T mycloud today and hit setup as instructed, First I setup on Iphone, It worked, then I went to my Mac, but then I got this error message and I got this:And could not go further. Even my mobile access http://wdmycloud.local.Mycloud is blue light. Wifi is working.Please help.Very appreciated.kind regardsxniu002
Hi,I contacted the support centre. It's frustrated to know that this kind of problems happened very often because of their software glitch. I need to download a MDMyClound desktop app which they never mentioned on their instructions. Even though, it still takes a few tries by restarting my cloud again.But the good thing is, it works now even I can never finish the setup process.Thanks for your help.
Similar Messages
-
How to Setup Error Message in BADI Implementation in MIGO Screen?
Hi anybody,
I want to Setup error Message in MB_MIGO_BADI - Post Document Method.
How do I setup SAP Standard Error Message?.
anybody please tell me this is urgent......
I will give reward for this answer.
Thanks
Regards,
S.Muthu.Hi,
Inside the user exits or Badi's the warning messages will not work. We are having two options for displaying the messages.
1. Populate the warning message in the std message log.
(Or)
2. Use the Function Modules POPUP_TO_CONFIRM & POPUP_TO_INFORM and display the message.
Regards
Kiran Sure -
Setup Error message prevents installation
When I try to install Indesign I get the error message similar to : Minimum Requirements not met: Windows XP server pack 3 or Vista service pack 1 must be installed for setup to continue.
However- I have Vista service pack 1 installed, this is a very frustrating limitation, and I would like to find a way to solve this.Are you able to simply ignore and proceed? I got a similar message installing on my XP SP2 system and it runs fine.
Not sure about vista, but in XP if you right click on My Computer (just Computer in Vista, I believe), and select Properties, the General tab lists the service pack level. -
Setup Error message in Query Designer
Hi all,
I have built a BW IP query with an aggregate as infoprovidor. In order to make the query plannable I have to use all KF and Characteristic and set the correct filtervalues. I have executed this specific query many times in order to check if all rows/columns are filled ok and are plannable but the last time I executed the query the following error message popped up :
"Setup Error Failed to load resources from resource file. Please check your setup"
When I click OK the Query Designer shuts down. When I then start the Query Designer again and want to select my query the same error message appears so I cannot access my query anymore.
I am going to built a new one but like to know the probable cause of this error message as my query was consistent for sure.
Thanks!
Raymond FlatonDid you find a solution to this? we are having the same issue
-
Setup error message, suggestions welcomed!
I installed and unstalled Digital Editions. Then bought a new Sony eReader, and went to
Adobe to again install DE. At the end of the setup I get the following error message: This installer require administrative access, aborting. Now the software doesn't work right, no surprise I guess.
I 'live chatted' with Adobe and asked them to toss me from their database, but the rep asked that I try the ADE forum to see if anyone has see this problem. I think the uninstall wiped the program but I'm still being partially recognized when trying to download it again from Adobe. I need HELP in capital lettersJim,
Thanks for your response. The problem was so simple but I didn't know it at the time. An Adobe Chat Line person told me to open ADE, then do the 'CtrlShiftD' to deactivate, then then uninstall. Then I did a new clean reinstall. FINALLY (sigh) ADE is working properly. I was able to successfully download two ePub books from my local library to my new Sony ER350. Again I do thank you for taking time to consider my problem!
Connie -
Setup error message with 4.1.4e update
I have a Tungsten T3 Palm. In the process of reinstalling my software using the download, "Palm Desktop 4.1.4e and HotSync Manager (Windows)"; during the install an error message states"unable to complete setup because unable to connect to internet,", but the install completes with this error in notepad, "Dll Unloaded. HSManager is Closed. InstallerNotify dll installed successfully.Error in loading the library."
I don't know what the problem is as my internet connection is fine and I can only assume the download is not corrupt. Could someone please help me, as I have lost all my info in my computer and it remains on my Palm but I am unable to sync it back onto my computer...
Thank you, Lisa 05/27/10Hi, and welcome to the Palm Support Community.
Suggest you try a "clean uninstall" of Palm Desktop, and try reinstalling from the download. Instructions in this thread.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android -
Hello, i have a nb200 that i just got... as i turn on the notebook, i get an error message saying " THE SYSTEM IS NOT FULLY INSTALLED. PLEASE RUN SETUP AGAIN" i have tried to restart it and remove and reinsall the battery but nothing works... can someone please help.
Try running Recovery from the HDD.
I think you hold the Zero key down during Power-On, or choose Recovery from the Vista startup menu (Press F8 before Windows boots). -
How to setup error message in JSP if no data or page found
I want to show users some error message after user clicks on a link and no page or data is found.
How do I show users to a valid error message if there is no data exists after they click on a link?Add the following line at the top of your jsp
<%@ page errorPage="error.jsp" %>
Then, write a error.jsp in whichever fashion u want.
My error.jsp begins like this
<%@ page isErrorPage="true" %>
<html>
<head> -
Home Sharing Setup Error Message
I am trying to set up my Apple TV. When I go to home sharing, I type in my Apple ID and correct password, and then receive an error message that says, "The Apple ID you entered couldn't be found or your password was incorrect. Please try again." I have tried multiple times, and I have tried with different Apple ID's... It still doesn't work. What is the problem????
Verify that your password is correct by logging in @ appleid.apple.com. If it doesnt work the issue is password related. If it works power cycle the apple tv and the router (powered down for at 30 seconds). If you still have the problem after that the issue could be port related. HT2463 lists all the ports that are required. If you don't know how to open ports on the router call the router manufacturer.
Home Sharing Troubleshooting article should cover all the basics as well.
HT2463 (ports): http://support.apple.com/kb/HT2463?viewlocale=en_US
TS2872 (troubleshooting homesharing): http://support.apple.com/kb/TS2972?viewlocale=en_US -
I'm trying to setup my new router, but in the setup mode, after plugging in the router, I get the message "this application has requested the runtime to terminate it in an unusual way.
program: G:\PureInstaller\setup.exe" and the program closes. I'm running Vista Home Premium with all the updates. Any help would be appreiated.
Thanks,
EdI think the problem was caused from my Internet Protocol Version 4 in Network Connections not being set to "Obtain IP Address Automatically." I changed it and did the configurarion through the web utility and it worked fine; didn't try the CD again though.
Thanks'
Ed -
Help!
I received this error as soon as I inserted the disc.
InstallShield Wizard: iPodSetup.exe-Entry point not found.
The procedure entry point ENRONMS could not be located in the dynamic link library KERNEL32.DLL
I use a Fujitsu Lifebook laptop with Windows XP Home.
Please help if anybody..Looks like one of hte dll's required for installshield might be damaged or missing on your windows install. you might do a google search for install shield and see if you can find an install and reinstall the install sheild files.
-
Error message control for invoice w/o PO in SRM
Hi,
Anyone know how to setup error message if invoice value limit is above e.g. 10000 USD? Invoice will be entered without PO.
There will be no PO but invoice will be created and user should get error message if total invoiced value is above 10000 USD.
We are in SRM_SERVER5.5 with SP 06.
If anyone came across during IMS setup, please help me on it.
Thanks in advance.
Regards,
Rahul MandaleHi Atul,
Thanks for your useful answer. I am getting error message while creation of invoice. But problem is that it is throwing message for all invocie, need to consider if condition of 'GROSS_AMOUNT >= 1000 USD. During creation of invoice, it should throw msg 001 (YIMS) which I have configured as my exception in IMS when fulfills the condition.
I am sending code for 'CHANGE' and "CHECK' BADI.
Can you check and suggest the correction? Where I need to put this conditon for pop up of error while gross_amount >= 1000 while creation and change of invoice??
Thanks in advance.
regards,
Rahul
<b>method IF_EX_BBP_DOC_CHANGE_BADI~BBP_IV_CHANGE.</b>
DATA: ls_header TYPE bbp_pds_inv_header_d,
lt_messages TYPE TABLE OF bbp_smessages_badi,
ls_message TYPE bbp_smessages_badi,
lf_dummy TYPE c,
lf_gross_amount TYPE BBP_IV_AMOUNT,
i_guid TYPE BBP_GUID .
get data of the invoice from guid
CALL FUNCTION 'BBP_PD_INV_GETDETAIL'
EXPORTING
i_guid = i_guid
IMPORTING
e_header = ls_header.
IF ls_header-GROSS_AMOUNT >= 1000.
CLEAR ls_message.
ls_message-msgty = 'E'.
ls_message-msgid = 'YIMS'.
ls_message-msgno = '001'.
APPEND ls_message to lt_messages.
EXIT.
ENDIF.
<b>method IF_EX_BBP_DOC_CHECK_BADI~BBP_DOC_CHECK.</b>
Data ls_message TYPE bbp_smessages_badi.
*To create custom message
clear ls_message.
ls_message-msgty = 'E'.
ls_message-msgid = 'YIMS'.
ls_message-msgno = '001'.
append ls_message to et_messages.
endmethod. -
Hello, I am having a very hard time attempting to install Office 2010 Pro Plus on a system. The error message that I receive is as follows:
The language of this installation package is not supported by your system.
I have tried running the Microsoft FixIt tool to remove any traces of Office 2007 and Office 2010. Also, I have followed the instructions in
KB928218 to manually uninstall any traces of Office 2007.
I believe the user had both Office 2007 and Office 2010 installed previously. There is no article to remove all traces of Office 2010.
Here is some additional output from the Setup log:
Parsing setup.xml file: F:\Access.en-us\setup.xml
Error: Installation of this product requires operating system supplemental language support. Type: 54::NoSupportedCulture.
Error: Installation of this product requires operating system supplemental language support. Type: 54::NoSupportedCulture.
Error: Installation of this product requires operating system supplemental language support. Type: 54::NoSupportedCulture.
Showing parent-less message Title: 'Setup Error', Message: 'The language of this installation package is not supported by your system.
I have tried both running setup from a disc and a network share. I am completely stumped and have been trying to get this to load for hours now. Thanks in advance for any advice!Hi,
Thank you for contacting Excel IT Pro Discussions Services.
From your description, I understand that you encountered the following error when trying to install Office 2010:
"The language of this installation package is not supported by your system"
If there is any misunderstanding, please feel free to let me know.
Please check if this blog helps:
http://blogs.technet.com/b/jks/archive/2009/04/23/how-to-fix-the-error-the-language-of-this-installation-package-is-not-supported-by-your-system-during-office-products-installation.aspx
If anything is unclear or if there is anything I can do for you, please feel free to let me know.
Best Regards,
Sally Tang -
SCCM 2012 - Deploying Office 2013 Application - Setup Errors
dear SCCM admins,
i am trying to test deploying office 2013 to users in my company. i made the application and deployments. the application appeared in the software center and in the application catalog.
The problem is whenever a user "which is not a local administrator" tries to install this application, it gives me the setup errors message saying "You must have administrative privileges to install or uninstall this
product."
Is there any specific configuration to make to overcome this behavior???
appreciate your suggesstions
M.ZakariaAs you can see from the screenshot you need to add the ProductID after the uninstall command.
See here for finding the ProductID
http://blogmines.com/blog/2012/07/21/how-to-check-version-of-office-2013-products/
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
In iCloud setup my apple I'd is not accepting. Getting error message it should be an email I'd, but my my apple Id is just in user I'd form? Please support.
I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish
Maybe you are looking for
-
How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?
-
I had a problem with my second gen iPod Touch showing it had 3gb of movies when I had already cleared them from iTunes. Anyway, did a restore and that solved that problem. However, since the restore, I have a new problem: When I am running on the tre
-
Problem opening PDF files (There was an error opening this document. Access Denied)
Hi Guys, I understand that I will need to search through all the post before I post anything (and I did googled and searched as well) but I really tried everything they suggested through the post but nothing works. I tried reinstalling the program, d
-
Premiere crashes when exceeding ~1.2GB memory usage
This is extremely annoying. I have found Premiere to crash when it hits around 1.2GB to 1.5GB of memory usage on medialayer.dll or something. I was able to crash Premiere in just a matter of seconds after launching it and opening my project. I work q
-
IMac is giving me "cannot find server" error message. HELP!
here is the message I am getting. http://thoughton.co.uk/digitallife/weblog/images/safari_noserver.jpg this is regardless of using firefox or safari. now I just recently moved and am connecting to a new network. My airport shows the network, I enter