Setup.exe does not wait until the installation is done

Hi,
I downloaded ODAC 10.2.0.2.21 from here:
http://download.oracle.com/otn/other/ole-oo4o/ODAC1020221.exe
And after extracting all files, I use this command on cmd:
setup.exe -silent -noconsole -waitforcompletion -force -responsefile <Path>
Furthermore, I have BOOTSTRAP=FALSE on oraparam.ini but setup.exe does not wait until the installation is done.
I only want a way to wait for the installation to complete...
Cheers,
Joan

DBMS Direct wrote:
What's the main reason you want to do a silent install for ODAC?To launch it from a bigger installer of an application which uses ODAC.

Similar Messages

TS3988 icloud.exe does not load from the installer onto my windows 7 laptop

Installed the iCloudSetup from Apple. Installer said everything installed and finished. When I go to open iCloud, the laptop is looking for the iCloud.exe file and after a few minutes, it notifies me that it cannot find the original .exe file.
I am thinking of re-loading the installer file again and starting over.
Any other suggestions?
Thanks!!

There is an app you can download for xp, i havnt tried it because im not going to use icloud but if you go onto the ipad tab and then icloud there is a link on there.

HT4414 I get a message "In order to continue installation, please close the following application. I closed the application, but the message does not close and the installation is "frozen" ... how do I reset?

I get a message "In order to continue installation, please close the following application. I closed the application, but the message does not close and the installation is "frozen" ... how do I reset?

Try posting in the Mountain Lion forum. Here is the link below. This forum is for old software circa 2003.
https://discussions.apple.com/community/mac_os/os_x_mountain_lion

HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Sorry for being unclear.
When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list). I will already be logged in with the Apple ID I use for everything (my dev account). I will be able to update all of the other various applications needing updating except for my Final Cut Pro. When I click the update button next to the FCP update, it will give me an error saying "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite. FCP was working fine until the upgrade. Is there anything that can be done to fix this?

Ora10g_win64_cient Setup.exe does not start

Hello Everybody,
I downloaded ora10g_win64_client (10.1.0.2) and I try to install it on Windows 2003 Enterprise SP1 for Itanium 2 but when I try to launch setup.exe then a black windows named Oracle Universal Installer appear on the screen.
On this window the following message are displayed...
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from C:\DOCUME~1\ADMINI\~1\LOCALS~1\Temp\1\OraInstall2007-01-23_06-04-52PM. Please wait...
After 5 seconds the window disappear and the Oracle Universal Installer does not start.
Do you have any idea to solve that problem?
Thanks and best regards
David Lindemann

Hi,
Thanks for your reply to my thread but I already did what you suggested without success and after further investigations we found that the problem is in the jre. The java.exe does not work, it return an unknown error. We tried to download the jre from SUN in order to use it instead of the one delivered by Oracle and it worked the installation succeeded.
But now we have a new problem, the Network Configuration Assistant does not work an exception is throw by the oranjini10.dll
David Lindemann

Oracle 11g R2 Install on Windows 7 64 bit setup.exe does not work.

Hi
I am trying to install Oracle 11g R2 on my Windows 7 Ultimate 64 bit. When I execute setup.exe as Administrator the command window flashes and exits. I could not even see what the message is. Also tried command prompt. Can anyone help me resolve this issue?
Appreciate your support.
Regards

user1484609 wrote:
Installation Successful after executing the install from C:\temp and not within users. Even if you execute as Admin Oracle Install does not have access to the folders in C:\Users...
Finally the install is successful.Congratulations.
And thank you for posting your solution. The security issue was quite a surprise to me as well, although it ties into a PC World article I read today.
To continue, please make sure you have a static IP address. If your system uses DHCP, that may mean setting up Loopback Adapter, configuring a static IP address other than 127.0.0.1 for that (for example you can use 192.168.123.101), and updating C:\windows\system32\drivers\etc\hosts. (note - no 3 char 'type on the hosts file) to include an entry like '192.168.123.101 myhost.example.com myhost', and perhaps setting your ORACLE_HOSTNAME variable. This is all described well in the Install documentaiton at http://download.oracle.com/docs/cd/E11882_01/install.112/e10843/reqs.htm#BABIAEEC

With firefox not running, I cannot upgrade as my computer thinks it is still running. Firefox.exe does not appear in the task manager.

I seem to be able to start Firefox only once after I reboot my computer. After that it will not start. I tried upgrading the software using Internet Explorer to get the upgrade file. The installation failed when the computer said I needed to close Firefox to install the upgrade. The task manager didn't show firefox on the list as one of the processes and it wasn't running anywhere on my machine.
== after I installed Skype ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)

Jim Harris:
Hanging at exit is most frequently caused by an Extension or a Plugin.
'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

[Solved] systemd does not wait for the unit to finish

My problem is described in the title. I have made a test by enabling the following unit:
[Unit]
Description=/etc/rc.local Compatibility
[Service]
Type=forking
ExecStart=/bin/sleep 1000
TimeoutSec=0
RemainAfterExit=yes
After=network.target
[Install]
WantedBy=multi-user.target
The unit is well started (a process sleep 1000 exists). But with a type=forking, systemd is supposed to hang in this case. Instead, the graphical.target is launched, systemctl list-units mention it as dead, but the display manager is started before the sleep 1000 completes. Ho can I force systemd to wait?
Last edited by olive (2015-03-16 16:49:34)

olive, now you're making even less sense. I didn't say the sleep example was stupid and I didn't question your reasons for doing/wanting this.
I suggested you add "Before=display-manager.service" and you respond "I added Before=graphical.target and it didn't change anything."
I also tried to explain why systemd has no reason to delay the display-manager.service. You could have asked for further clarification, as berbae has now done. Let's try a longer explanation.
Service startup
Services can be started in different ways, as configured with Type=. This determines when a service is considered "started" (or when the service's start-up is considered finished). When a service reaches this state (some time after being started), units that are supposed to start After= this service will be started (and no sooner).
With simple systemd has no further information about the start-up process. It launches whatever you specify in ExecStart and this is the main process that continues to run till the service stops. systemd assumes this type of service is started immediately. All the other types have some way for the process to indicate to systemd (either directly or indirectly) when it has finished starting.
Actually oneshot is also a bit special and that is where RemainAfterExit comes in. For oneshot, systemd waits for the process to exit before it starts any follow-up units (and with multiple ExecStarts I assume it waits for all of them). So that automatically leads to the scheme in berbae's last post. However, with RemainAfterExit, the unit remains active even though the process has exited, so this makes it look more like "normal" service with
begin of unit/startup ---- end of startup ------ end of unit
This is the relevant behavior for this thread. First sleep starts, then after 1000 seconds, start-up finishes and follow-up units will be started. Then either the unit dies, or (with RemainAfterExit) it stays "active".
The man page describes how "end of startup" is determined for each Type.
Targets
Targets are meant to group units together, to provide synchronization points (and replace runlevels). When you start a target, all its units will be started (in parallel if possible). The man page says:
Unless DefaultDependencies= is set to false, target units will
implicitly complement all configured dependencies of type Wants=,
Requires=, RequiresOverridable= with dependencies of type After= if the
units in question also have DefaultDependencies=true.
This means that (by default) when a target is requested, all it units are started first. Only after all units have finished starting, the target itself will be started (and since the target doesn't do anything by itself, this startup is basically instantaneous). Without this dependency, the order between the target and its units is unspecified, so in theory the target could finish starting immediately while its units are still being started.
Back to olive
graphical.target has these DefaultDependencies, so it is not started until all its units (like display-manager.service) and other After= dependencies (like multi-user.target) have finished starting. Your sleep service has to be started before multi-user.target starts (again due to default target dependencies). So first display-manager and the sleep service are started and after 1000 seconds, the sleep service finishes starting and then (assuming all other dependencies were quicker) multi-user.target is started and graphical.target as well (assuming display-manager didn't need 1000 seconds).
If you want display-manager.service after the sleep service, add a Before/After line to specify that (this was your original goal and my suggestion).
olive wrote wrote:However, units that are parts of the graphical target are still launched before the graphical target become active. I am still unable to completely delay the starts of the graphical target before a specific unit completes.
It should be clear now how this works. "units that are part of the graphical target" can only mean "units that are wanted/required by the graphical target" but that is basically all the units that are started when you boot your system, because multi-user.target is a part of graphical.target. And your sleep service is a part of multi-user.target, so in fact you're saying you want to delay starting the sleep service until the sleep service completes
What you probably intended was to delay all units that are a part of graphical.target but not of multi-user.target until after the sleep service. I can't think of an easy (or even good) way to do this and this post is already too long, so I'll table that for now.

Setup.exe does not execute - Oracle 10g on windows xp!?

Hello,
I have a problem while installing Oracle 10g Release 2 on my XP-prefessional machine (including service pack 2). By doubleclicking the autorun-file the openingdialog pops up, but after I chossed Installation nothing happens - the same by starting the setup.exe - also from the dos-box. I shut down my AntiVir and the ZoneAlarm-Firewall and tried again without success. Maybe sombody had the same problem. Big thanx for every help.
I would be glad to get an error but absolutly nothing happens!

Installing on Windows is pretty simple, unless there is something that prevents the java environment from starting the console. Check the path environment variable and make sure there are no other jdk mixed. Check that the windows security doesn't prevent the oui console from starting, it happens that the windows security blocks java applications, and if you asked it to do it by clicking accept, then it won't start.
~ Madrid
http://hrivera99.blogspot.com/

Setup.exe does not run

Hi,everyone,
I have a question about installing oracle 9i on windows 2000.
I downloaded three zip files and recorded them on CD-Rs and extract them into three different folders on another computer. After the extraction, when I clicked on setup.exe in the first folder, it did run. How can I solve this problem?
Any help will be highly appreciated.
thanks
Joe

hi to everybody.
To make you notice if you have this oracle which is not 9i and you apentium 4 Computer than there is a bug of the JRE so you got to download the new realease.

PreviewProcessingService.exe does not run in the background

I just installed VS2013, and SQL2014 RTM, and after that I installed SSDT BI for VS2013 released version (http://www.microsoft.com/en-us/download/details.aspx?id=42313).
But when I created a SSRS project in VS2013, and then preview the report, there pops up a command windows "C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\PrivateAssemblies\PreviewProcessingService.exe", and it runs in the foreground,
not like in VS2012 or VS2010, that command does not appear, and it runs as a background process. Besides that, if I close that windows, and preview the report again, it shows the error, "There was no endpoint listening at net.pipe://localhost/PreviewProcessingService5692/ReportProcessing
that could accept the message. ".
Anyone has the same issue? how to work it around?
Hunter

Hi Katherine,
Thank you for the suggestions. I tried both of them, for option 1, I can't find any the service named "Net.Pipe Listener Adapter" in the computer services manager. Then I tried the option 2, the "setspn" command was successfully executed, but when
I previewed the report again, the "PreviewProcessingService.exe
" window still popped up, and if I close it, preview the report again, there's the error shown in the "Preview" page, below is the output from VS2013,
Exception rethrown at [0]:
 at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
 at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
 at Microsoft.ReportDesigner.Design.IPreviewProcessing.BeginSetItemPath(String itemPath, AsyncCallback callback, Object asyncState)
 at Microsoft.ReportDesigner.Design.PreviewProcessingClient.BeginSetItemPath(String itemPath, AsyncCallback callback, Object asyncState)
 at Microsoft.ReportDesigner.Design.WCFProcessingHost.<>c__DisplayClass1.<set_ItemContext>b__0(AsyncCallback ac, Object s)
 at Microsoft.ReportDesigner.Design.WCFProcessingHost.<>c__DisplayClass3b.<ExecuteAsyncCall>b__39()
 at Microsoft.ReportDesigner.Design.WCFProcessingHost.ExecuteWcfCall(Action wcfCall)
 at Microsoft.ReportDesigner.Design.WCFProcessingHost.ExecuteAsyncCall(Func`3 beginAction, AsyncCallback endAction)
 at Microsoft.ReportDesigner.Design.WCFProcessingHost.set_ItemContext(PreviewItemContext value)
 at Microsoft.Reporting.WinForms.LocalReport.ChangeReportDefinition(DefinitionSource updatingSourceType, Action changeAction)
 at Microsoft.Reporting.WinForms.LocalReport.set_ReportPath(String value)
 at Microsoft.ReportDesigner.Design.PreviewFrame.RefreshPreview()
Hunter

Setup.exe does not execute

I am working with Windows XP Home OS. I downloaded Oracle twice. The first time with 92021Win64_Disk1 and 92021Win64_Disk2. The second time with 92010NT_Disk1.
In both cases, the program of intallation of Oracle I do not manage to carry out program SETUP.EXE
Which version I have to download and what I must make?
Thanks

Installing on Windows is pretty simple, unless there is something that prevents the java environment from starting the console. Check the path environment variable and make sure there are no other jdk mixed. Check that the windows security doesn't prevent the oui console from starting, it happens that the windows security blocks java applications, and if you asked it to do it by clicking accept, then it won't start.
~ Madrid
http://hrivera99.blogspot.com/

Aggregator-created EXE does not autorun chapters the 2nd time it is viewed on a machine

I created an .exe using the CP6 aggregator. When the .exe is opened, the first chapter runs automatically, as expected. It always runs automatically on my machine. However, when my colleague opens the .exe the first time, the first chapter runs automatically. But when she closes and re-opens the .exe, the TOC and aggregator frame are displayed, but the first chapter does not run automatically. Once she selects the first chapter in the TOC, it runs. We have tested this on 5 machines. On two of the machines, the first chapter runs automatically no matter how many times the .exe is opened/closed. On three of the machines, the first chapter runs automatically the first time the .exe is run on the machine. But once the .exe is opened on the machines for the 2nd and subsequent times, the first chapter does not automatically run.
Additional info: One of the machines where it works properly and one of the machines where it does not work properly both had the exact same Flash Player version. So it's not a version issue. However, when we updated the Flash Player version on another machine, it seemed to "reset" the .exe. When it was opened on that machine the first time after the update, it ran the first chapter as expected. However, on subsequent attempts the first chapter did not open automatically again. So it may indeed, have something to do with Flash Player, but I'm stumped. Any help would be greatly appreciated.

I was finally able to track this back through by starting from scratch and received an error code, which led me to this post:
https://forums.ni.com/t5/LabVIEW/Error-2147319779-Excel-ActiveX-and-Broken-LabVIEW-Icon/td-p/2354776
Deleting the "1.7" items solved the problem.

After a crash during the installation of Captivate, the installation program does not "initialize" and the installation procedure stops. Any suggestion?

I bought “Captivate” few days ago. I received the internet address to download the program and the activation number. I downloaded the program (OK), started the installation program (OK) and received indications that the decompression process was OK. Then the installation started and I was asked to introduce the activation number (OK). After this, a bar showing the progress of the installation was shown on the screen. The bar stopped at 2%. I waited more than 20 min and saw no progress. Then I decided to start the “windows task manager” to see if the process was active. I have windows 7, so I pressed alt-ctrl-del and received the message (2-5 min later) that the task manager could not start. I waited more time (more than 1 hour) and since the installation progress was still indicating 2% and since I still could not activate the task manager, I rebooted the computer.
I then tried to reinstall the program. After the decompression, I receive the message:”Installer failed to initialize. Please download Adobe support advisor to detect the problem”. I followed the link to discover that the program is no more available.
What should I do?

Hello,
Please follow the steps down below .
Disable the start up items. ( Ms config )
Rename the OOBE folder from the location mentioned below .
Windows: C>Program files or Program files(x86)>Common files>Adobe>OOBE and rename the OOBE folder to like (OOBE_old).
Uninstall the Adobe Captivate 8 components manually from the machine. Delete all the Adobe Captivate files and folders manually.You may check the following locations.
 o C:\Program Files\Adobe*
o C:\Program Files\Common Files\Adobe*
o C:\Program Files\Common Files\Macrovision Shared
o C:\Program Files (x86)\Adobe*
o C:\Program Files (x86)\Common Files\Adobe*
o C:\Program Files (x86)\Common Files\Macrovision Shared
o C:\ProgramData\Adobe*
o C:\ProgramData\FLEXnet
o C:\Users\<user_name>\AppData\Roaming\Adobe*
o C:\Users\<user_name>\AppData\Roaming\com.adobe.*
o C:\Users\<user_name>\AppData\Local\Adobe*
o C:\Users\<user_name>\AppData\LocalLow\Adobe*
o C:\Users\<user_name>\AppData\Local\VirtualStore\Program Files\Common Files\Adobe*
Create a new user account which has the admin rights on it.
Restart the machine.
Login to a new user account .
Once you are logged in then try to install it again.
Regards,
Rajeev .

10g setup.exe does not execute on XP pro?

Instructions say: Download the Complete Files
10g_win32_db.zip Directions 1. Download to an empty directory and run setup.exe in the /Disk1 directory.
I did and it doesn't do anything when I run setup.exe. My drive is partitioned for what it's worth.
Thanks!

I fell to the same error.
Are you running the setup without unzipping the file?
It just wont run, you need to unzip the file and then run setup.

Setup.exe does not wait until the installation is done

Similar Messages

Maybe you are looking for