Setup.exe doesn't work for Captivate

I just purchased the Adobe Captivate 4 program and chose the download option.  I downloaded the program and when I went to unpack the software I got the JScript error (Please note this system already has the full Adobe Design Premium CS4 installed and functioning). I was able to repair the issue but I'm now unable to launch the Setup. I double click to run but it just does nothing. It shows up in my Task Manager as a running process but doesn't do anything. Please help!
Operating System: Windows XP
Chrissy B

Hi Chrissy
You may wish to try downloading again. Sometimes a download may become corrupt during the process.
If you try again and it still fails, you likely need to contact Adobe Support to assist you with it.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

  • DW setup.exe doesn't work

    Hi
    I download dreamweaver CS3 trial version. I click setup.exe
    after initialising, it close the window. cannot onstall the
    software.
    No problem for me to install in my home computer but doesn't
    work for my work computer.
    I am using windows XP at work. any suggestion??

    I am having the same problem. I have XP 2, and have
    downloaded CS3 and have used a DVD of the full version, and after
    the installer is done, the setup screen pops up momentarily then
    disappears. I am at my wit's end!
    All my virus software, security, etc, anything that runs in
    the background is off. The only other Adobe programs on my computer
    are Photoshop CS2 and Reader 6. My previous version of Dreamweaver
    is version 4.

  • Adl.exe doesn't work for me

    I am developing for both Mac and Windows. I have flex_sdk_3
    installed on both machines. For Mac, everything works fine. For
    Windows, everything except running adl.exe works. It complains
    "Adobe AIR could not be found." On both machines, I unzip'd the
    flex_sdk_3 to /usr/local/flex_sdk_3. (Under Windows, I'm doing this
    under Cygwin, so that would be C:\cygwin\usr\local\flex_sdk_3.) I
    set FLEX_HOME in my environment correctly. Even if I explicitly
    specify the location of the runtime with:
    -runtime C:\cygwin\usr\local\flex_sdk_3\runtimes\air\win
    ant it still doesn't work. I've tried every variation of
    -runtime with different directories and nothing.
    A little help?

    Hi,
    I have cancelled your Export PDF subscription for the order no.AD013879714.
    Your refund no.is 66181172.
    You will get the refund in 7 business days.
    Regards,
    Florence

  • Cannot install BI Publisher 10.1.3 Windows 7 setup.exe has stopped working

    Hallo!I am trying to install Oracle BI Publisher 10.1.3.4 on Windows 7 Professional 32 bit.When I click on the setup.exe,the following output appears on the cmd prompt
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0 . Actual 5.1Passed
    Checking monitor: must be configured to display at least 256 colors . Actual 4294967296 Passed
    Checking Temp space: must be greater than 500 MB . Actual 252112 MB Passed
    Checking swap space: must be greater than 500 MB . Actual 1900MB Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from C:\Users\jirungu\AppData\Lo
    cal\Temp\OraInstall2011-04-13_09-33-57AM. Please wait ...
    When the OUI tries to launch,the following error appears
    setup.exe has stopped working.
    Is this due to an incompatibility problem?Are there any prerequisites for installing BI Publisher?How can I resolve this?
    Thanks.
    Edited by: 4joey1 on Apr 12, 2011 11:35 PM
    Edited by: 4joey1 on Apr 12, 2011 11:36 PM

    I am also facing the same issue and i tried with the following modes
    xp mode
    vista mode
    2000 mode
    still i am seeing the same error.
    My Notebook is Window 7 Home Premium 64bit & have jdk 1.6 32bit.
    Edited by: user5345841 on May 26, 2011 12:10 PM
    Edited by: user5345841 on May 26, 2011 12:55 PM

  • Oracle client 9i doesn't work for windows ordinary user

    Hello All,
    I've installed oracle 9i client on windows xp. Client software works for user belonging to windows administrators group. it doesn't works for ordinary users not belonging to administrators group. Particularly when i run sqlplus from command line i get following error :
    Incorrect environment variable PLUS_DFLT
    Program execution error.
    i also need access to Oracle ODBC driver.
    When i try to configure ODBC source (created by user with administrator privileges) by common user i get following errors :
    The setup routines for Oracle for Oracle in OraHome9i ODBC driver couldn't be loaded due to system error code 5
    Could not load the setup or translator library
    Very appreciate for any help.
    Regards Arkadiusz Masny

    It sounds like the users on the machine do not have access to the Oracle home directory. Check the permissions of the folder by right properties, select the user and check that they have read and then select advanced. Tick the "replace permission entries....." box and apply. This will re apply all user rights in all folders and subfolders. Try again.
    HTH Mark F

  • CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.

    Hello and sorry for my english. My name is Jean-Pierre BRETHES and I have a problem with the creativecloud.exe program which doesn't want anymore to start. (since a while now) The icon in the system tray doesn't appear and it still to be gray (not red). When I clic to lunch the program nothing happen. When I try to reinstall it the download end by a windows "error 50" and everything is stopped.
    AT the beginning I wanted to download In design  program to try the PAO functionalities. Thank to help me. My email adress is <removed email - kglad>. Have a nice day. JP

    Hello and sorry for the delay. Thank you for your answer. I did what you wrote and everything is fine now. Really thank you for that. I fully understood regarding my email address in my message. I will not anymore do this error.
    Have a nice day.
    Sincerely, Jean-Pierre BRETHES
    De : kglad 
    Envoyé : dimanche 6 juillet 2014 23:33
    À : Jean Pierre BRETHES
    Objet :  CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.
    CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.
    created by kglad <https://forums.adobe.com/people/kglad>  in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/6527054#6527054>

  • [kde] "Only show tasks from the current desktop" doesn't work for max

    Hi,
    I have two monitor setup (laptop + main monitor) and I would love to use "Only show tasks from the current desktop" option in KDE Task Manager but for some strange reason it doesn't work for me. Well, it works but only partially - for restored/unmaximized windows. When I maximize one it appears on the Taskbar on both screens. Is this normal? May it be due to the fact that I've placed Taskbar on top of the screens?

    Did you miss this bit
    "Graphics : 1 GB NVIDIA Quadro 600 (1DP & 1DVI-I) (1DP-DVI & 1DVI-VGA adapter) (ELGA13) 1"
    And the final image clearly states the type of Graphics Card he has
    Photoshop CS6 GPU FAQ
    Tested video cards for Photoshop CS6
    Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. The minimum amount of RAM supported on video cards for Photoshop CS6 is 256 MB. Photoshop 13.1 cannot display 3D features if you have less than 512 MB of VRAM on your video card.
    Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2012, you can assume that the card will work with Photoshop CS6.
    Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
    nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500, 600 series
    nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows & Mac OS)

  • Cannot install ZEN V -- Setup.exe has stopped working -- CTCABEX.

    I cannot install Creative Software for Zen V. Just before the installation finishes, I get the message: "setup.exe has stopped working. A problem with caused the program to stop working correctly. Windows will close the file and notify you if a solution is available."
    I also get the following message: CTX Installer-Install Shield Wizard that file CTCABEX.dll not found.
    Any ideas on how I can load the creative Zen V software>
    Thanks,

    I am also facing the same issue and i tried with the following modes
    xp mode
    vista mode
    2000 mode
    still i am seeing the same error.
    My Notebook is Window 7 Home Premium 64bit & have jdk 1.6 32bit.
    Edited by: user5345841 on May 26, 2011 12:10 PM
    Edited by: user5345841 on May 26, 2011 12:55 PM

  • The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that  wifi network

    The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message  even when im using the phone, has  this probleme with the iOs 6.0.1 and also with the iOs 6.1

    With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message  even when im using the phone, has  this probleme with the iOs 6.0.1 and also with the iOs 6.1

    This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

  • Push notifications doesn't work for apps like (fb viber , whatsapp etc ) iOs 6.1

    With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message  even when im using the phone, has  this probleme with the iOs 6.0.1 and also with the iOs 6.1

    Sorry, I've forgotten the actions done.
    I've restarted the iphone, and I've recovered a previous backup.
    Thanks.

  • How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
    iWork > Pages
    contenant Templates > My Templates
    comme il y a un dossier
    iWork > Numbers
    contenant Templates > My Templates
    Depuis le Finder, tapez cmd + f
    puis configurez la recherche comme sur cette recopie d'écran.
    puis lancez la recherche.
    Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
    Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
    Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
    Désolé mais je ne répondrai plus avant demain.
    Pour moi il est temps de dormir.
    Yvan KOENIG (VALLAURIS, France)  mercredi 23 janvier 2011 22:39:28
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

    How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

    download the new you tube apps in i tunes, in os6 just pick a video in the photos apps and select share, the old you tube app icon will appear

  • I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.

    I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.

    Did you fail to look at the requirements before purchasing?
    All sales are final.  You can try contacting itunes support and asking for an exception

  • Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through j

    Certainly I realized that Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through jquery or javascript.
    e.g.
    In Felix Console , in Apache Sling JCR Resource Resolver configuration I have added following mapping.
    /content/myproject/-/
    So If any anchor tag is there like <a href="/content/myproject/en.html"> click me </a> then it will be mapped to "/en.html" automatically.
    But the problem is there in following scenario.
    I have an anchor tag as follows.
    <a href="#" id="test"> click here </a>
    And I am assigning the href to anchor through JQUERY.
    <script>
    $("#test").attr("href","/content/myproject/en.html");
    </script>
    Ideally this should have been mapped to "/en.html".
    But it is not mapping to "/en.html". It still shows "/content/myproject/en.html".
    How to resolve this.
    Thanks,
    Sai

    In a servlet you have access to the resourceResolver so if you know which attributes contain links then it's relatively easy to apply resourceResolver.map to those links.
    Your challenge is clearly how do you know which attributes are links and which aren't. Its is the same challenge that makes parsing the response and rewriting it on the way out difficult - the JSON doesn't have any semantic meaning so how do identify which attributes require rewriting. There really is no good answer ot that question in my experience - all the options have down sides.
    Create some convention - all attributes matching this pattern X get mapped before being converted to JSON (could be attributes whose name ends in link, or it could a convention applied to the value of the attribute - if the attribute is a string that starts with /content apply the resource resolver mapping. In this case you have train your developers to follow this convention which is the down side.
    Create some configurable list of attribute names that require mapping. This is brittle, requires training and is easy to break.
    Implement a client side version of the resource resolver mapping. It wouldn't be as full proof as server side mapping (because that takes into account but you could make it work for simple logic like stripping of /content/site/en. If ou are just trying to solve the simple version of this issue - stripping off the top of the repository path this might be your best option.
    Not worry about it and set up Apache 301 redirects that catch any long URLs and redirect them to short URLs (so configure apache to look for any URL matching /content/site/en and strip off /content/site/en and do a 301 redirect to the shortened URL. You end up with a lot of extra HTTP request because of all the 301s but it would work (I wouldn't recommend this option - but it is possible).

Maybe you are looking for

  • How to move the code and deploy the code from Dev environment to SIT.

    Hi, I have a requirement. I want to move the components and deploy the code from dev Environment to SIT environment using Ant Script for AIA. Before doing this is any pre-requisites required? Can you please help on this,how to do? Thanks in advance.

  • Text not appearing properly (more difficult then it sounds)

    I have been trying to figure this thing out for a while. I gave up and am going at it again. I have a couple of website in languages other then english (Chinese, Korean, and Russian, to name a few). The developer created the pages in HTML, without us

  • Not possible to maintain info record for MPN material

    Dear All, I m purchasing abc material from one vendor with different make.  and maintaining same in purchase order like : Material code            MPN number              rate ABC                          reliance make              7 ABC             

  • XI restart in qRFC not allowed

    I am new in XI. Have prior experience in debugging BW related queues or CIF queue (APO) but not XI qRFC. In our XI system's inbound queue is having stuck queue with large no. of LUWs from mdm system with SYSFAIL error. Opening the qRFC for details sh

  • What if my gift card don't work

    Gift card won't work