Setup for Crystal Report

Hi,
I had to build setup for my VB.Net add-on, which has crystal report in it.
I built the setup using Crystal merge modules.
But, when I install the add on for the first time, it pops the message- "There is another version of the program which is already installed"
I tried building it N different times, with N different names for Add-ons, exe.
Nothing worked out. I tried cleaning up the add-on folder, registry, but the problem is not solved.
Appreciate your help!
Thanks in advance.

Hi Geetha,
Are you using the B1DE to create your addon installer? If so, try changing the Product Code property of the Setup project.
Kind Regards,
Owen
P.S. You might be better asking this question on the development forum rather than here (as this is application focused).

Similar Messages

Best practise BW Query design for Crystal Reports integration

Hi all,
I am looking for a guide on best practices when designing a BW Query to be used as data foundation for a Crystal Report.
The scenario is that I am responsible for developing the Crystal Reports part, but not the BW Query part, therefore I would like to provide a list of best practises to the person who is responsible for the Query, this way make sure that the integration will work as good as possible. The setup is of course using BO Integration Kit for SAP.
An example is how to use authorization variables in the query to provide data security. This is just one example, there are problably a number of other things to be aware of. A document containing suggestions for best practices is what I am looking for, or if the document does not exist, input to what should be on such a list.
Thank you in advance.
Regards,
Rasmus

Hi Rasmus,
in regards to the Best Practices for Crystal Reports you can leverage all the knowledge you have on the Query Design today already. if you not the person for designing the query I think it is important to make sure people designing the queries do understand how Crystal Reports is leveraging the elements from the BI Query.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
You should try to put as much as possible into the BI query from the logic point of view.
and you can also build common BI queries - there is no need to build a BI query for each report.
ingo

SAP Integration Kit for Crystal Reports

Hello,
I read Ingo Hilgefort's blog on BusinessObjects and SAP Part 2.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Does the current trial version of crystal reports available from businessobjects.com have this integration kit embedded in it?
If not, where can i find it?
Regards,
Suraj

hi shenoy,
SAP Integration Kit
The SAP integration kit includes drivers to allow connectivity to both R3 and Business Warehouse (BW). In addition, it includes a BW toolbar for Crystal Reports, a specific version of InfoView with Role-based links, sample iViews for Enterprise Portal, and an SDK in Java, COM, or .NET.
Reporting off R3 Data
The kit includes two drivers to allow Crystal Reports to connect to the ABAP data dictionary via a remote function call or RFC.
The Open SQL driver allows the user to connect to SAP R3, displaying the field and the short text description of the tables and fields. The developer can then join the tables accordingly, using the database expert, and then select the relevant fields from which to report. This driver displays not only transparent tables, but includes views, pool tables, cluster tables, ABAP data clusters, and ABAP functions. This driver is geared toward a technical person with functional expertise in joining the tables and then creating the report.
see link
http://safari.oreilly.com/0672329174/ch15lev1sec7#X2ludGVybmFsX1RvYz94bWxpZD0wNjcyMzI5MTc0L3BhcnQwMg==
http://diamond.businessobjects.com/node/18962
SAP Integration Kit
The SAP integration kit includes drivers to allow connectivity to both R3 and Business Warehouse (BW). In addition, it includes a BW toolbar for Crystal Reports, a specific version of InfoView with Role-based links, sample iViews for Enterprise Portal, and an SDK in Java, COM, or .NET.
Reporting off R3 Data
The kit includes two drivers to allow Crystal Reports to connect to the ABAP data dictionary via a remote function call or RFC.
The Open SQL driver allows the user to connect to SAP R3, displaying the field and the short text description of the tables and fields. The developer can then join the tables accordingly, using the database expert, and then select the relevant fields from which to report. This driver displays not only transparent tables, but includes views, pool tables, cluster tables, ABAP data clusters, and ABAP functions. This driver is geared toward a technical person with functional expertise in joining the tables and then creating the report.
Note
In Crystal Reports, you cannot check the SQL generated using the Show SQL Query option from the Database menu. You can check what Open SQL was generated by using SAP transactions.
The InfoSet driver allows the user to connect to an existing InfoSet, as defined by SAP transaction SQ02. Alternatively, you can use an existing ABAP query, as defined by SAP transaction SQ01. The benefit of this driver is that the user does not need to know where the data is stored or how to join the tables. Another advantage is that any prompts defined in the InfoSet become parameters in Crystal Reports.
Note
To test the InfoSet query, run the InfoSet using your SAP GUI and ensure that it is pulling the required data first before testing it in Crystal Reports.
Reporting off BW Data
When reporting off of BW data, the Business Objects' Integration Kit consists of three drivers that are used to pull data.
The BW Query driver enables the user to connect to a BW query. To enable selection of a query with this driver, Crystal Reports has its own toolbar, as shown in Figure 15.3, and the user needs to select the New Report icon from this toolbar. The user then selects the required BW query, and thus displays a listing of fields available in the query. The user can then create the report using any of those fields. Variables defined in the query automatically become Crystal Reports parameters. After the user has finished building the report, the user saves the report using the BW toolbar. This saves the report to BW, and if the user selects the option to do so, automatically publishes the report to Enterprise.
Figure 15.3. Crystal Reports after the SAP integration kit is loaded. Note the SAP menu and BW toolbar.
[View full size image]
Two new drivers have been added to the XI R2 version of the SAP Integration Kit.
The MDX query driver supports using Crystal Reports to report off either a SAP BW query or a BW Cube.
Furthermore, it adds additional functionality by providing support for
A structure in both the row and column of the BW query
Hierarchy node and hierarchy node variables
Free characteristics in a BW query
The Operational Data Store or ODS driver exposes the ODS tables, so that they look much like the tables of any relational database. However, because of the structure of the objects, it considers them to be like a database stored procedure.
Connecting to the ODS objects is not performed with the SAP toolbar described here, but rather by selecting the driver from the Data Explorer as shown in Chapter 1, "Creating and Designing Basic Reports." After the user has finished building the report, the report can be saved back to BW and published to Business Objects Enterprise by selecting the Automatically Publish to Enterprise check box, as shown in Figure 15.4.
Figure 15.4. The additional options after saving a Crystal Report to SAP BW.
Note
This publishing method requires some setup. Please refer to the Installation documentation for further details.
Note
Both the ODS and MDX drivers require SAP transports to be loaded on the SAP BW system. Please refer to the Installation CD in the Transports folder for further details.
Using OLAP or Web Intelligence to Report off BW Data
Included in the SAP Integration Kit are specific drivers to allow OLAP Intelligence and Web Intelligence to report off of SAP BW.
To connect to a BW cube or query using OLAP Intelligence, open the connection browser and select Add. Select SAP Business Information Warehouse and then proceed to fill in the relevant data, as shown in Figure 15.5.
Figure 15.5. The information required to connect to a BW cube or query from OLAP Intelligence.
[View full size image]
After you are connected, select the query or cube and process to build the report, as described in Chapter 19, "Creating OLAP Intelligence Reports."
Web Intelligence is new to XI R2 and requires that a universe be built on a BW Cube or Query. However, to aid in this process, Designer builds the universe for you. To do this, select SAP from the list of connects and fill out the required information, as displayed in Figure 15.6.
Figure 15.6. The information required to connect to a BW cube or query from Web Intelligence.
[View full size image]
Finish the remainder of the wizard and when you click OK, Designer generates the Universe for you. It may be necessary to move some of the objects around to suit your needs, but when you are finished, export to Business Objects Enterprise.
Note
Only the BW query driver does not require the query be released for external access. The Web Intelligence, OLAP Intelligence, and MDX drivers require the user to release the BW query. To release a query, select the query properties in the BW Query Designer and select the Extended Tab and then check Allow External Access to This Query.
Viewing the Reports
Your SAP reports can be viewed either via the SAP integration kit's InfoView or via SAP Enterprise Portal 6. The integration kit provides a number of sample iViews that can be imported by a portal administrator. These include
Folder iView The folders a user has access to are displayed, and from here a user can run her reports.
Alert iView Shows all the alerts that have been triggered by Crystal Reports. The user can then click on the report to view the report. The creation of alerts is defined in Chapter 11, "Using Record Selections and Alerts for Interactive Reporting."
Thumbnail iView This iView displays the Crystal Report as a thumbnail of the report. The user can then click on the thumbnail to run the report.
Note
These are sample iViews. The organization can create its own iViews via the provided SDK.
BusinessObjects InfoView for SAP is a unique version of InfoView designed for integration with SAP BW systems. This integration includes features such as the ability to log on to InfoView using your SAP username and password. Related to authentication is the ability to access your roles and the Crystal Reports saved to these roles. The roles are defined in Enterprise as folders. The user can also schedule reports in the different languages loaded into SAP BW. This creates an instance for each language.
for remainig info pls use the link
http://book.soundonair.ru/sams/ch15lev1sec7.html
very good link for sap integartion kit
thanks
karthik
reward me points if the above info is usefull.
dont forget

How to install SharePoint MOSS 2007 PIK for Crystal Report Server XI R2?

My configuration is :
Moss 2007 without any Crystal Report or BO component. on one box with Windows 2003 server
Cyrstal Report Server XI R2 on another box
I have downloaded the kit installation: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/webcontent/uuid/503988db-58c5-2b10-f79d-cb96700417f9 [original link is broken]
I used this one as they said:
BusinessObjects XI Release 2 SharePoint 2007 Portal Integration Kit
Download BusinessObjects XI Release 2 SharePoint 2007 Portal Integration Kit - ZIP 5MB
I do not have BO Enterprise.
Thanks,

Answered my own question. Managed to upgrade to 5.0 following this process, but follow these instructions with care...
1. Stop all CMS services in Config Manager.
2. Go to Add/Remove programs and click "change" for Crystal Reports Server XI. Click on "Modify" then change the entry for MySQL4.1.13a to "Entire Feature will be unavailable" (from Enterprise -> Server Components -> Servers - > Central Management Server). This will remove the existing mySQL version and any data/license key information/customisation, so be wary.
3. Install the desired version of mySQL.
4. Use the MySql command line to create a new database - "create DATABASE BOE115;"
5. In the Central Config Manager, select the CMS and display its properties. Select the Dependencies tab and remove the old version of mySQL and add the new version. Click on the Config tab, then Select Datasource. Select mySQL driver, then complete the details for the newly created database. Once complete it will still produce an error, at which point you need to select the options to Re-create the Current Datasource.
6. Once the datasource is sucessfully recreated, restart the Crystal service in the Config Manager.
7. Open the Config tool, and add your license key. Then Re-Enable all the servers within the Servers page.
8. Any other customisation or preferences would need to be re-applied.
This worked for me, but obviously take care as your existing mySQL database will be completely removed during the process.

Stored Procedure for Crystal Reports

Hi All,
I developed this test stored procedure to see wheather we could a stored procedure for crystal reports. It compiled without any problem, but when I run it, it gives me error message. Here is the stored Procedure..
CREATE OR REPLACE PROCEDURE WOLD1SIM.TEST_PROCEDURE(
TEST_CURSOR IN OUT TEST_PACKAGE.TEST_TYPE,
TEST_PARAMETER IN TEST_TABLE.ID%TYPE)
AS
BEGIN
OPEN TEST_CURSOR FOR
SELECT *
FROM TEST_TABLE
WHERE TEST_TABLE.ID = TEST_PARAMETER;
END TEST_PROCEDURE;
And
This is the error message..
ERROR at line 2:
ORA-06550: line 2, column 1:
PLS-00201: identifier 'TEST_PROC' must be declared
ORA-06550: line 2, column 1:
PL/SQL: Statement ignored
I have created the package sucessfully.
I was wondering If any one of you can advice me where I am making the mistake.
Thank you

CREATE OR REPLACE PROCEDURE WOLD1SIM.TEST_PROCEDURE(TEST_CURSOR IN OUT TEST_PACKAGE.TEST_TYPE,
TEST_PARAMETER IN TEST_TABLE.ID%TYPE)
...you have 2 parameters in your procedure WOLD1SIM.TEST_PROCEDURE(). you should also use two parameters when you execute the procedure.

JRC Deployment Guide for Crystal Reports 2008

I just downloaded a trial version of Crystal Reports 2008 & was testing out the integration of this component into our Java web based application.
I found the "Crystal Reports XI Release 2 - Java Reporting Component Deployment Guide" PDF file, but I was wondering if there was a more recent version of this guide for Crystal Reports 2008. Maybe I'm a bit confused regarding the versions but this guide currently references JARs in a folder under ...\3.5\java\lib. However, when I looked in the same section of Crystal 2008, I noticed it was \4.0\java\lib & the JARs are different.
Is there a new JRC Depolyment Guide for Crystal Reports 2008?...If not, is there any documentation I can use to map between the 3.5 libraries and the 4.0 libraries?
Thanks

Hi,
There is no separate JRC has been launched for the CR 2008.
But SAP has launched the Crystal Reports 4 Eclipse 2.0 in which CR 2008 has been integraqted with backword compatibility.
To know more please check following link:
[Whats new in CR4E 2.0|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/301717ef-3ad3-2b10-5aad-8d9b73a6e365]
Thanks,
Tej

Do I need a new license for Crystal Reports Release 2?

Post Author: jerryk
CA Forum: Upgrading and Licensing
Hi,
We have a license for Crystal Report XI. However we need Crystal Reports Release 2 since we are using .Net 2.0. I just tried installing the Crystal Reports Server on out test web server and it would not accept the license key we have. Do we need to get a new key?
jerry

Post Author: colin mackenzie
CA Forum: Upgrading and Licensing
Hey jerryk.
Check out this URL.
It will help.
http://www.businessobjects.com/products/reporting/crystalreports/xi_release_2.asp

Cannot download PrintControl.cab for Crystal Report Basic (VS2008)

Our legacy ASP.NET application uses Crystal Report Basic (from Visual Studio 2008), and it can't download PrintControl.cab from address : http://resources.businessobjects.com/support/downloads/microsoft/vs_2008/printcontrol.cab
Is there any new address to download PrintControl.cab ?
I also experienced this problem last year (PrintControl for Crystal Report for Visual Studio 2008), but the new address of PrintControl.cab is not working now.
Please help.

Hi Paulus,
Yes they killed that server so we are working on finding a new URL to link to....
Don

Merge files or redist installer for Crystal Reports 2011

I cannot find packages for merge files or installer for the redistribution files for Crystal Reports 2011. I have found them only for older versions. In the download section there is somewhere a hint that they are at a different position but no information where.
Can anyone help me?
Thank you
Arne Ortlinghaus

Hi Don,
thank you. It is ok using the files you indicated me. But there are still some doubts.
What does happen on a machine where a designer 2011 (internal version 14) is installed and an application that uses the dlls for Visual Studio 2010 (internal version 13). Does this work without problems?
In a readme for the redistributables for Visual Studio 2010 I have found the following text which I cannot interprete:
If you have installed Crystal Reports 2011 or any of the SAP BusinessObjects XI 4.0 products,
you may notice that their installation contains the same "Crystal Reports 2011" and "SAP
BusinessObjects Enterprise XI 4.0" folders as you see in this folder. Please note that the
folder/files names may be the same but most files have a different version, and are not
compatible with the Crystal Reports 2011 or SAP BusinessObjects XI 4.0 products.
Currently we want to upgrade our programs from Crystal Reports 9 to 2011 and we have many installations where for one machine the Crystal Reports Designer is needed together with our applications.
Arne Ortlinghaus

CrystalDecisions.Web.resources.dll for Crystal Report 2011

Hi,
I recently install Crystal Report 2011and I try to use localization for Crystal Report Viewer in a .NET web application.
I read several tutorials which say to use CrystalDecisions.Web.resources.dll. I don't find this dll for Crystal Report 2011.
Could you help me ?
Thanks in advance,
Fred.

Hi Fred,
I believe you are looking for Crystal Reports Viewer which was a separate download correct? Currently there is no download for CRV 2011. It's in the works and the link should be made available in a few weeks, no exact time yet.
Thank you
Don

Column limits for Crystal Reports for Eclipse

Hi ,
Is there any column limits for Crystal Reports for Eclipse. While i am trying in my environment, if i am include more than 18 columns its wont show the preview as well as it throws error like as follows "java.lang.NullPointerException at sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:991) at java.lang.Double.valueOf(Double.java:447) at oracle.sql.NUMBER.toDouble(NUMBER.java:326) at oracle.jdbc.dbaccess.DBConversion.NumberBytesToDouble(DBConversion.java:2975) at oracle.jdbc.driver.OracleStatement.getDoubleValue(OracleStatement.java:4485) at oracle.jdbc.driver.OracleResultSetImpl.getDouble(OracleResultSetImpl.java:567) at com.crystaldecisions.reports.common.data.JdbcCrystalResultSet.getDouble(Unknown Source) at com.businessobjects.reports.jdbinterface.common.ResultSetReader.readColumnValue(Unknown Source) at com.crystaldecisions.reports.queryengine.ResultSetRecordReader.a(Unknown Source) at com.crystaldecisions.reports.queryengine.Rowset.a(Unknown Source) at com.crystaldecisions.reports.queryengine.RowsetColumn.xL(Unknown Source) at com.crystaldecisions.reports.queryengine.Rowset.z1(Unknown Source) at com.crystaldecisions.reports.queryengine.Rowset.bN(Unknown Source) at com.crystaldecisions.reports.queryengine.Rowset.bI(Unknown Source) at com.crystaldecisions.reports.queryengine.RowsetBase.bJ(Unknown Source) at com.crystaldecisions.reports.queryengine.RowsetBase.za(Unknown Source) at com.crystaldecisions.reports.datalayer.a$e.za(Unknown Source) at com.crystaldecisions.reports.basicdataengine.a.w(Unknown Source) at com.crystaldecisions.reports.basicdataengine.a.p(Unknown Source) at com.crystaldecisions.reports.basicdataengine.a.a(Unknown Source) at com.crystaldecisions.reports.datalayer.a.do(Unknown Source) at com.crystaldecisions.reports.datalayer.a.a(Unknown Source) at com.crystaldecisions.reports.dataengine.m.b(Unknown Source) at com.crystaldecisions.reports.dataengine.j.b(Unknown Source) at com.crystaldecisions.reports.dataengine.m.o(Unknown Source) at com.crystaldecisions.reports.dataengine.m.a(Unknown Source) at com.crystaldecisions.reports.dataengine.ContextNode.a(Unknown Source) at com.crystaldecisions.reports.dataengine.ContextNode.a(Unknown Source) at com.crystaldecisions.reports.dataengine.j.case(Unknown Source) at com.crystaldecisions.reports.dataengine.h.(Unknown Source) at com.crystaldecisions.reports.dataengine.DataContext.a(Unknown Source) at com.crystaldecisions.reports.dataengine.DataProcessor2.a(Unknown Source) at com.crystaldecisions.reports.dataengine.DataProcessor2.a(Unknown Source) at com.crystaldecisions.reports.dataengine.DataProcessor2.new(Unknown Source) at com.crystaldecisions.reports.dataengine.DataProcessor2.try(Unknown Source) at com.crystaldecisions.reports.dataengine.DataProcessor2.int(Unknown Source) at com.crystaldecisions.reports.dataengine.DataProcessor2.I(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.fl(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.if(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.a(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.X(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.moveToPageN(Unknown Source) at com.crystaldecisions.reports.formatter.formatter.lightmodel.FCMPageFormatter.goToPage(Unknown Source) at com.businessobjects.crystalreports.designer.core.elements.formatted.MultiPageModel.B(Unknown Source) at com.businessobjects.crystalreports.designer.core.elements.formatted.MultiPageModel.A(Unknown Source) at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedPages$2.A(Unknown Source) at com.businessobjects.crystalreports.designer.core.elements.formatted.FormattedPages$2.call(Unknown Source) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269) at java.util.concurrent.FutureTask.run(FutureTask.java:123) at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$3.doWork(Unknown Source) at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(Unknown Source) at com.businessobjects.crystalreports.designer.core.util.thread.PriorityTask.run(Unknown Source) at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.runSubtask(Unknown Source) at com.businessobjects.crystalreports.designer.core.util.thread.PriorityProgressAwareRunnable.runSubtask(Unknown Source) at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.doWork(Unknown Source) at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(Unknown Source) at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$_B.run(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675) at java.lang.Thread.run(Thread.java:595)".
But i removed any one column, it wont make any problem and able to preview. Whenever put more than 18 columns, its throwing issue. Can you please help me to identify the issue.
Regards, Siby

Hi,
Are you talking about the fields coming from the Data Source Explorer?.
If "Yes" then there is no such limits.
Are you able to run the report through the eclipse designer?
Thanks,
Neeraj

Looking for Crystal Reports for . net framework 2.0 (x86) in MSI Format..

Looking for Crystal Reports for . net framework 2.0 (x86) in MSI Format..

Wasn't sure which version you are using, so here are the two i think you might be using:
[CR for VS2005|https://smpdl.sap-ag.de/~sapidp/012002523100010010692008E/crredist2005_sp1_x86.zip]
[CR for VS2008|https://smpdl.sap-ag.de/~sapidp/012002523100006255282008E/CRRedist2008_x86.zip]

I searsh support for crystal reports for VS 2005

Post Author: wahid
CA Forum: Crystal Reports
Hello;
I learn crystal rports for VS 2005, for do reporting but i can't, can you send me address web for crystal reports and programming code in crystal reports
think you,

Before dishing out good $$ for a phone support, have you posted your query in these forums? Have you used the search box in the top tight corner to see if there is a solution already documented?
Just sayin...
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Dynamic url link for Crystal Reports Enterprise?

Hi all,
We recently upgraded to SBOP 4.0 SP2 and are looking at migrating our existing Crystal Reports from Crystal Reports 2011 to Crystal Reports for Enterprise 4.0.
Up to this point we have been utilizing the BW Publisher and role menus in BW.
Our long term goal is to migrate users from the BW GUI to the BI LaunchPad but this will be a gradual process.
Until we make the final switch to the LaunchPad we need to maintain the links in the role menus. I found the Document Link option for Crystal Reports so I have a URL to point to the report that we can put in the role menu, but the system value is not dynamic. Is there a way to make this dynamic like we can do with web template URLs?
For example, when using a web template URL we can use the <bsp_server> parameter in the URL to determine the SAP system. Is there an equivalent that can be used in the Document Link for the Crystal Report to determine the respective SBOP system?
Thanks.
-Brian

Hi,
Below is link for the Crystal report for Eclipse 2.0:
[http://www.businessobjects.com/campaigns/forms/downloads/crystal/eclipse/datasave.asp|http://www.businessobjects.com/campaigns/forms/downloads/crystal/eclipse/datasave.asp]
you could always refer to the following thread as Bryan updated with new releases :
[Crystal Reports for Eclipse 2.0 Release Update 8 is Now Available!|Crystal Reports for Eclipse 2.0 Release Update 8 is Now Available!;
Hope this will help
Regards,
Rameez Shaikh

Where is the Tech Support for Crystal Reports

Where is the technical support for Crystal Reports? I have just been through one of the worst technical supports circles in my entire career - this phone# to that phone# and only to be told you cannot talk to a Tech Support person. My dilema for anyone that can help - I am using Crystal Report 2008. I have mapped to a database in MS Access 2002. I copied the database to my desktop and created a test report. I can see the fields in the Field Explorer. I have dragged the fields onto the report and they are visible in Design View. I can see the data in the fields when I browse the fields. In the Preview View I do not see any data what-so-ever. I have not changed any defaults and have not suppressed or hidden information. The $1M question: Why can't I see the data on my report? I never had the problem when I used Crystal Reports v8.

The datasource shows my database. I believe that is what you meant. No data. IT has asked me to ask ? if in the Control Panel DSN if we need some information there. I don't have a clue - I am just a report writer and not an IT person.

Setup for Crystal Report

Similar Messages

Maybe you are looking for