Setup for external call in to BPEL from the Internet

We are already using BPEL internally, there is a possibility that we'll need an external party to call our BPEL process. Does anyone have recommendations on how to appropriately secure calls coming in to BPEL from over the Internet ? We have a DMZ which currently is really just used to host an ftp service.
Products, recommendations for configuration, use of reverse proxy - your comments welcome.

All you need is a Web Server installed in the DMZ to proxy the external calls to the internal network where the BPEl is installed.
have a look at the following doc it should give you examples of this topology.
http://download.oracle.com/docs/cd/E10291_01/core.1013/e10294/toc.htm
cheers
James

Similar Messages

  • Is there a way to access the web-based setup for my router if I cannot access the internet?

    Okay, I need to change the ip address settings on my router. I have a WRT54G Wireless router. I cannot access the internet on my computer connected to the router, and do not know how to change the router settings without accessing the web-based setup page. So, back to my question. Is there a way to access this page if I cannot connect to the internet?

    On the back of the router is a small reset switch. Using a paper clip or other small item, press the switch in and hold it for a few seconds. This will reset the router to the default IP address of 192.168.1.1. Enter that address in your web browser, and be sure your computer is attached to the router by an Ethernet cable. Don't attempt to do this using the wireless connection.
    Once you have reached the web configuration utility you can change the DHCP settings.
    To give your PC a static IP address you will need to open your network connections panel and, assuming your using Windows XP, make the changes from dynamic IP to static there.

  • Help with scheduling a program to record from the internet

    Recently, I received a message on my tv about a new feature for scheduling programs to be recorded from the internet.  So now I'm wondering how you do it.  Which website do you go to?  I've been to verizon.com and verizon.central.net and did not see anything for it.  I have also called customer service but they are having "issues" with their systems.  Can somebody please help?
    All I am trying to do is schedule a program to record at home from my desk at work...
    Solved!
    Go to Solution.

    You should be able to do it from here: http://www36.verizon.com/fiostv/web/Default.aspx. However, remember you must have the Home Media DVR to be able to use it.
    Justin
    Verizon FiOS TV, Internet, and phone
    IMG 1.6.0, Build 06.89
    Keller, TX

  • Click-to-call - zero for external calls

    HI,
    i'm using CLICK TO CALL to dial numbers from web page.
    I read numbers from a db but they haven't zero for external calls and i can't modify the db so i asky you:
    Can I post to clickToDIal application a param (0) to add to number for external call?
    thanks

    Indeed application dial rules is what you can use. It is explained here:
    http://tools.cisco.com/squish/56877
    You can also disable dial rules and configure fixed values as outlined here:
    http://tools.cisco.com/squish/F1DdD

  • I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    Hi mshields1162,
    Great question, and welcome to Apple Support Communities.
    First, you may want to choose to have the sidebar displayed for familiarity:
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Afterwards, your device should be displayed if connected:
    We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

  • I was lookin for a song from will.i.am called drop it low from the moive rio

    I was lookin for a song from wiil.i.am called drop it low from the moive rio i think

    I wanted this too.
    There was no commercial version of it that I could find.
    It exists on youtube as a clip (with good audio).
    I used a free software to rip the audio file from youtube & make it into an mp3.  worked great, play it for my kids & dance regularly!

  • RD Web Access From The Internet/External

    I’m requesting help with accessing from the internet (external web) a RD Web Access Connection (SSL) that I setup and configured on a Windows 2008 R2 Server.
    My setup is as follows. All server rolls are configured and running on one Windows 2008 R2 Server (VM).
    1.      
    Remote Desktop Services
    a.      
    RemoteApp Manager
    b.     
    Remote Desktop Connection Manager
    c.      
    RD Gateway Manager
    d.     
    RD Session Host Configuration
    e.     
    Remote Desktop Service Manager
    f.       
    Remote Desktop Licensing
    2.      
    Web Server (IIS)
    All my configurations are working perfectly internal/intranet. I can access all published applications and remote desktop connectivity via (SSL) from IE 9 web browser.
    The URL that is used internally is: (https://ServerName/RDWEB).
    When I attempt to connect via the internet I’m getting an “Internet Explorer cannot display the webpage” message.
    I’m using Dynamic DNS to access the server hosting the (IIS Remote Access Web Page URL), example (https://DDNS/RDWEB). I’ve opened ports 443 & 80
    on my Untangle firewall, also port forwarding for 3389.
    Any and all help will be appreciated.

    Freek,
    Thank you for your response. I tested Telnet as you suggested, and both FQDN and IP address were able to establish a Telnet connection to my RD Web Access Server.
    The “NSLOOKUP” resolved the DNS server name. Also, I am able to us the IP address, URL (https://IP/REWEB) in IE9 to browse to my RD Web Access Server site. The above should confirm DNS IS working correctly within my internal network.
    My connection issue is from external/internet access to my RD Web Access Server site. All my networked devices (internal) are natted IP assigned behind an “Untangle
    Gateway” firewall and routable internally only.
    Although, I’ve opened ports, created firewall rules to pass traffic on ports 443, 3389 my problem still exist. Since my internal natted devices are not routable
    from the internet, I am using a DDNS host URL from (www.dyndns.org) to route from the internet to my internal site server. As it stands now, I suspect the problem maybe at the Untangle Gateway”. I will focus my attention there.
    Thank you again for your help.
    Aubrey R. Martin

  • How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling?

    How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling? It is installed on my home network behind my TWC broadband router.

    Ok.. since the TWC modem is also a router.. all configuration takes place on this box.. NONE whatsoever takes place on the TC.
    There is no airport utility 7.7.3 but there is a firmware of that number for the latest AC model TC..
    Is it tall like this.
    Then it is Gen5.
    otherwise it will have a firmware.. 7.6.4 or earlier and the airport utility must be 6.3 or earlier.
    Open the Airport utility and give us a screenshot of the summary page.
    That will also help us determine that you have the TC, which version and how it is setup.
    You might want to press the edit and also give us the Internet and Network tab as they should be set correctly as well.
    I have created a DDNS through DYN.com although I am not sure how to implement this into the TC.
    You do not do anything in the TC.. set it up in the Ubee router.
    Port forward 548 to the TC in the Ubee router.
    And make sure the TC has a static IP in the Ubee router.
    Overall if you find this too hard I strongly recommend you buy a product designed for remote access .. eg WD MyCloud.. they are cheap and easy peasy to setup for remote access.. by PC or Mac and since it is built outside of Apple you not bound up in Apple limitations built into all their equipment to prevent you using it the way you want.. rather than apple want you too.. eg BTMM and iCloud being the only way apple provide for access to the TC and only when it is the main router of the network.
    You are fighting hard because Apple made this hard.. not easy.

  • Access to a site from the Internet not working, but is for other sites on the same SP

    Greetings,
    My environment:
    SP 2013 Enterprise w/ SP1 installed
    2 servers in the farm, 1 for SQL, 1 for SP
    Both servers are VMs running on Hyper-V, SQL is a bit underpowered when it comes to memory, SP is fine
    5 web applications running, including a MySites web app and Central Admin (I've seen where separate web apps isn't the recommended configuration any more, but, this is how it was done when setup)
    All sites run using SSL (443), same NIC, using host headers, pretty standard stuff (I think)
    Claims authentication on all but Central Admin
    Central Admin is firewalled off to all but a select few
    1 to 1 correspondence between web apps and content databases
    Other than MySites, all sites have either 1 or 2 site collections (search is in a separate site collection on 2 of the sites); MySites has many more site collections
    So, site A, site B, site C, and site M are all supposed to be available from the Internet (with SSL and authentication) and also from the internal network. For site A, C, and M, this is true, no problem. Site B however doesn't work when coming in from the
    Internet, just internally. I've received multiple reports of this from some of my users around the country, and I've been able to replicate it on my computers.
    IIS just gives a blank page, no messages, no login. Chrome does present a login box, and will log into the site and work. This is from a laptop that is a part of our domain with cached credentials, but not directly connected to our network or using
    our VPN. A non-domain laptop without cached credentials prompts me to login, as it should, and seems to work. The domain laptop will use the cached credentials to auto-authenticate to A, C, and M, but not B.
    I'm using IE 11. I've tried putting the site into Compatibility mode, no joy. I've added the site to the Trusted Sites list, no joy. I don't have IE 10 available for testing (or 9 or 8 or ... just 11 :-(  ) I've flushed the browser cache, emptied the
    cookies, etc.
    So, 3 of 4 sites work fine on the same machine, same Internet connection, same browser, same SP. I'm thinking it's something with IE, but, what? Seems like IE should be sending the same creds to all the sites, as they're all in the same Internet domain.
    Does IE or Windows cache different creds somewhere? Or is there something in SP? I could see where one person's settings could get hosed somehow, but numerous people around the country with different h/w, different Internet connections, different credentials?
    ARGH! HELP!!! Point me at something to look at, because I'm drawing a blank (and getting permanent dents in my forehead from banging it on my keyboard)...
    Thanks much,
    Steven

    It seems that the difference between the sites that will open and the one that won't is the Default Authentication provider is set to NTLM on those that open, and Negotiate (Kerberos) on the one that won't. The Authentication Provider for the Default zone
    is Claims Based Authentication on all the sites, just site B (which won't open) is set to Negotiate (Kerberos), the others are set to NTLM.
    Short term: can I change the provider to NTLM without destroying the site?
    Long term: point me in the direction for setting up Kerberos correctly on my server/farm, as from what I can tell Kerberos is the recommended path forward. I'll setup a non-production test site and get it figured out.
    Thanks much.
    Steven

  • How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp

    How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
    I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.

    Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
    To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
    Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
    Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
    The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
    You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
    Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps!

  • But my machine is setup for talktalk,so i have to open the wireless and click on my provider to get on line.

    hi, i have an intel based imac running lion,when i start it up the wireless connection sometimes starts trying to connect to bt,but my imac is setup for talktalk,
    so i have to open the wireless drop down to select my provider.hope someone can advise how to stop it going into bt..

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • I can't import my movies to work on them. They are coming from a external hard drive, not directly from the camera, its type mpeg-e (.mts)

    My movies are type MPEG-2
    I can't import my movies to work on them. They are coming from a external hard drive, not directly from the camera, its type mpeg-2 (.mts)
    What can I do ?

    1. Is your external HD connected by firewire?
    2. mpeg2 is the final compressed delivery format of a DVD, not intended for editing, and iMovie cannot handle such files, so you need to convert them first:
    For that you need mpegStreamclip:
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://www.apple.com/quicktime/mpeg2/
    which is a mere $20.

  • Having trouble calling my work voicemail from the iphone - it doesnt recognize the dtmf tones

    i am having trouble calling my work voicemail frome the iphone - it does not recognize the DTMF tones from the dialpad.  we have justgone to a new IP voice system at work

    we use a remote dialling code to divert our office landlines to mobiles, we have had awful trouble with the iphones in doing this with the number stored as a contact, We also have trouble dialling the number direct from the keypad it still comes up with error and says the number has not been recognised.
    I have managed to sort out how to remedy this for us on this end and i will give an example below, the 'p' represents a pause
    (numbers changed for security)
    original phonebook contact stored, please notice the pauses 'p' only the first single pause
    01223495684p*65*4530*01223456456*07555456456#
    the new number now stored in the phonebook with the extra pauses 'p'
    01223495684pp*65p*4530p*01223456456p*07555456456#  as you can see we dial a landline number and then give a pause for the next tone to cut in, then we enter the overall divert code, after this we enter the pin code followed by the landline number to divert and finally the mobile number that will be taking the calls and finishing off with hash.
    all our other phones except the iphone will dial this number and work correctly with one pause at the beginning, I have now tried thios with two pauses at the beginning and one pause between each section and it now works fine,
    This has cured our problem using the io5 iphones 4s. we could not dial these numbers with the iphones for nothing, all other phones work fine. When you have a bluetooth headset connected the problem is even worse.
    this has cured our problem and hope this helps you all also

  • I can not get real audio player to record videos from the internet, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

    I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

    dont know what to do

  • I made an iMovie, 6.0.3 using music from iTunes and photos from the Internet. It looked fine on iMovie, but when I uploaded it to youtube,some of the photo near the beginning was corrupted.What steps should I take to export iMovie for youtube?

    I made an iMovie, 6.0.3 using music from iTunes and photos from the Internet. It looked fine on iMovie, but when I uploaded it to youtube, some of the photo near the beginning were corrupted on youtube. I tried a different photo, and the corruption took place at the same moment of the video. How do I prepare the video for export to get it ready for youtube? I wasn't sure whether to clik web or web streaming. Am I supposed to clik Quick Time after I clik Share?

    I unfortunately cannot remember where I got the 'trrndlines' plugin... I assume that it must have been from CFX (as it is located under /Users/Dom/Library/iMovie/Plug-ins/cfx/XXXtrrndlines.bundle).
    As for what it does, I also do not know, as I do not think I ever used it in my previous video projects.
    At this stage, I think I just need to uninstall it so that iMovie doesnt try to use it.
    Do you know how to uninstall a CFX plugin in iMovie?
    NOTE: I have re-installed iMovie 6.0.4 (instead of iMovie 6.0.3), but still encounter the same issue.

Maybe you are looking for