Setup for iphone 4

I'm trying to setup my new iphone 4, but itunes is not recognizing it. Could it be because I already have my iphone 3G profile in it?

Google doesn't, to the best of my knowledge, even make a browser for iOS. Even if they did, you would have had to have downloaded it from the App Store. And, even if you had downloaded an alternate browser (there are quite a few), they wouldn't launch if you tapped the Safari icon.
What, exactly, do you mean when you say "Google browser"? What are you seeing?

Similar Messages

Setup for iPhone 4 shows google browser when I touch safari. Help to change to safari., Setup for iPhone 4 shows google browser when I touch safari. Help to change to safari.

I was setting up my pop's new iPhone 4. When I was setting up the Safari Browser, it asked what I thought was which search engine I wanted to use, so I entered Google. Problem is that I somehow made the Safari Browser open up into a Google Browser. I love Safari & can't find how to switch it back to a Safari Browser when I touch the Safari App on Pop's iPhone. Looked in settings & couldn't find how to correct my mistake. Help please.

Google doesn't, to the best of my knowledge, even make a browser for iOS. Even if they did, you would have had to have downloaded it from the App Store. And, even if you had downloaded an alternate browser (there are quite a few), they wouldn't launch if you tapped the Safari icon.
What, exactly, do you mean when you say "Google browser"? What are you seeing?

Novell Groupwise Setup for iPhone

I have finally set up my iPhone to receive e-mail from my Novell Groupwise 7.0 mail system. To accomplish this, I used IMAP, entered my server's host name, my user name and password as requested. The hangup appears to have been that my server did not allow me to send mail via the phone since the phone is on another network (ATT's) than the mail server and relaying was prohibited. For the outgoing settings, I entered the generic ATT smtp host name of cwmx.com with no user name or password entered.
I disabled the wireless connection to make my initial account connection and to establish the account verification. I did this because I understand that cwmx.com only works on the EDGE network. Also, while trying to set up the iPhone mail account on wireless, if you don't have all the settings correct, or can't make the full verification of both incoming and outgoing, you will get a verification failure.
Once I took these steps, I was able to immediately connect. This connection created the account on my mail application so that I could then go deeper into advanced settings. I ensured that SSL was turned off. I saw that the incoming port was set to 143. The Apple technician had suggested using the default setting of 110, however, this did not work for me. When I reverted to 143, it worked immediately. The smtp port was set automatically to the default :25
I was able to receive all my work mail, and was able to send myself a reply using the EDGE network. When I then connected to wireless, I was also able to receive an e-mail. However, when I replied using wireless, the e-mail did not send, as expected. Once it failed, I found the message in the outbox and expect that once I disable wireless, or am on the EDGE network naturally, it will send. As I type this, I am on the EDGE network and the phone indicates that it is 'connecting', so I may still have some bugs to work out, but at least 60 messages came through from the server when I had not been able to connect ever before.

I have similar settings for Groupwise at work, I believe. What you posted is similar to what I see when I try to log in and it fails. It gives me a manual log in screen which has the :1677 portion.
I'm not a tech guy, I just worked with my tech guy to figure out that our Gwise server (for a city government) wouldn't allow me to access it remotely to send an e-mail so we had to trick the phone into using the ATT outgoing server to send an e-mail.
Once I had my account set up, I was able to create an account for a colleague while she was trying to access her account on her Treo. While she was fiddling with it, I duplicated my settings with her account name and password and it immediately worked on my phone with her account.
Our settings are IMAP. We didn't have to use the 10.21.1.20 type of settings at all.
As I re-read your post, it's not clear if you are using the wireless connection or if you are on the edge network. I couldn't get the account to connect initially until I disabled wireless within the settings section. Once I did that, it connected, created the validation and gave me an established account under the mail tab. Once I had that, I could go into the advanced settings and disable SSL, etc.
Now, I seem to be able to receive Groupwise e-mail through wireless connections, but have to be on the EDGE network to send.

COX Mail setup for Iphone 3GS

Has any set up mail on Iphone 3GS with a COX account with success. Wireless carrier is AT&T. If so I sure could use some help!!
Thanks

I tried to follow these instructions for connecting my iPhone 3GS to my Cox email account (the East region) with this page from Cox:
http://support.cox.com/sdccommon/asp/contentredirect.asp?sprt_cid=158115c0-571b- 4cad-a21d-28e74c663906
I could not get incoming or outgoing mail to work as shown in the article; although I could save the settings, when I tried to access the mailbox I got "failure to connect" error messages.
Just for kicks, instead of entering my full email address for the *incoming mail server* and *outgoing mail server* settings (e.g. [email protected]) as the Cox article displays, I entered my email address without the @ symbol and domain, just joeblow for both of those settings.
Eureka, that worked. I found that it worked being connected to my home wifi, and when connected without wifi over the regular cellular network and the 3G network.
So far, so good. I'll keep trying this for a day or two, and if it still works I'll post full instructions and also provide a comment to Cox so they can provide this suggestion as well. I'm sure these settings worked for Cox at one time, so I'm not sure why they didn't seem to work for me.

HT4557 whats the best itunes/appleID setup for family of 3 with 3 ipads, 3 iphones, one PC with all music on. if we use 3 separate ones how do we share purchased and home content?

been with apple for years. one itunes/appleID in use for family - all purchases and downloads on the one account..
now got 3 ipads, 3 iphones and when we update the software, we seem to get text/facetime issues due to multiple email addresses and phone numbers for the different devices that each individual uses. For example, I send a text and it appears to have come from my wife or son to the recipient. Not good !
there seems to be direction from apple that each of us should use our own apple id, thogh how do I link the accounts so enable family sharing of music/media we have purchased etc - Id also like to be able to review and keep a private eye on what my son downloads as he is 11 yrs old ! I manage this currently as we allow him access to the password for itunes (as we all use the same id today)
Am i better setting up accounts for my wife and son independent of my own, or not. Each of us would like access to the family content we have and the master library of synced content. I just want the most simplistic approach that apple, or others would recommend.
Is there a better or optimum setup for a family as we cannot be alone.....

Thanks for the help, but a follow up question now.
My iPhone won't arrive for a little while, but my wife already got hers and she wants to set it up now. Using my Apple ID for the purchases, if she starts setting hers up, can she change her iCloud ID to something else quickly? It keeps telling us that we have to sign in with the AppleID first.
Should we just set up an iCloud account via normal internet before trying all this via iPhone?

HT5625 i want to download the iPhone 4s setup for my laptop so how can i do it ??

i want to download the iPhone 4s setup for my laptop so how can i do it ??
when ever i download the pictures from internet ,
so when its downloading complete then i don't konw where is it ??
how can i send pictures from to desktop or from desktop to iPhone ???
plzzzzzzzz kindly help me about it soon
i m just waiting for ur reply .

http://www.apple.com/support/itunes/

To run VPN setup my iphone is requesting for 4 digit pass code ... can you pls assisit?

To run VPN setup my iphone is requesting for 4 digit pass code ... can you pls assisit?

Hello RozR,
We've an article that can help circumvent the new passcode and restore access to your iPhone.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Cheers,
Allen

HT201322 Downloaded a song from iTunes on my iPhone but only shows on my iPad. Setup for same iCloud.

Downloaded a song from iTunes on my iPhone but only shows on my iPad. Setup for same iCloud.

If you are syncing music to the iPhone automatically, you won't be able to play tracks on the iPhone from iTunes, the music will be grayed out.
You can play them in iTunes if you Manually Manage the music on your iPhone though.
You could also Transfer the purchases from your iPhone to a computer.

What is icloud setup for Multiple users, multiple devices in family?

What would be the recommended setup for iCloud to allow family members with multiple devices and multiple iTune accounts to share purchases, sync there own mail account, contacts, and reminders with multiple devices, and be able to sync calenders with all family calendars? Or better yet how can family members pick and choose what to sync with a common iCloud account?

I'd like to know this to.
We have 1 mac mini that serves as a media station that streams audio to Zeppelin air and photos & movies to our TV.
My wife buys music on her iPhone. And takes pictures of the family.
I buy apps and music on my iPad. And make movies of the family.
I have a macbook pro ( itunes with home sharing, iphoto home sharing ).
She has a nice macbook ( itunes with home sharing, iphoto home sharing ).
What we would want is that the mac mini collects all music / videos / media and streams it to all our apple devices via wifi ( not via internet ). But I with my appleID and she with her appleID.
I wonder is Apple can make an GUInterface that I can understand to solve this.
This iCloud seems not too suited.
For families it would be easier if iOS5 would have 'home sharing' with upload and not transfer everything to CA first.

Jabber for IPhone/IPad and Anyconnect VPN

I have just setup Jabber for iPhone and iPad in a CUCM 8.6/Presence 8.6 enviornment. Works great when on my wireless network at work.
The problem I have is that it doesn't work with Anyconnect VPN. Running 8.4 code and can access the CUPS website from the iPhone/iPad when on vpn. It just will not connect the Jabber clients. I have attached the logs for review.
There is only one difference in our wireless connectivity and VPN connectivity that I can think of at this point. Could it be my DHCP configuration not offering option 150 for tftp on the VPN? I am using a local pool on the ASA but it doesn't offer option 150 for tftp.

It's been a while so I don't recall exactly what I did. That said: I want to say that I connected it via the wireless network to let it pull down it's configuration and after it pulled down the initial configuration I was good to go on VPN.

VCS Expressway event log errors when Jabber for iPhone and Windows log in

hi folks,
I've deployed Collaboration Edge with VCS Control and Expressway:
my Jabber for iPhone succesfully can log in from Internet and it can IM but not calls and I see next messages in VCS Expressway when Jabber is logging in:
2015-03-27T18:00:28+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49543" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 16:00:28,204"
2015-03-27T17:58:55+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49535" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 15:58:55,786"
2015-03-27T17:58:32+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49527" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 15:58:32,202"
2015-03-27T17:58:08+02:00
tvcs: Event="Inbound TLS Negotiation Error" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49512" Dst-ip="Expressway-IPaddress" Dst-port="5061" Detail="No SSL error available, probably remote disconnect" Protocol="TLS" Level="1" UTCTime="2015-03-27 15:58:08,582"
"Digest User" in the "Protocol Specific Information" section of Phone Configuration selected right user. in this Jabber I see following error "Failed to get device configuration". however Jabber for Windows and for Android hasn't such issues - they succesfully can log in from Internet and it can do calls and IM but I see next messages in VCS Expressway when Jabber is logging in. The same log line appears when Jabber for Android log in:
tvcs: Event="Inbound TLS Negotiation Error" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="56751" Dst-ip="Expressway-IPaddress" Dst-port="5061" Detail="No SSL error available, probably remote disconnect" Protocol="TLS" Level="1" UTCTime="2015-03-27 14:19:11,769"
and I can't find any information which describe such types of error.
thanks!

Thanks Srini, but the instructions have two options:
1. Use the Control Panel, select "Oracle 11g..." and uninstall from there.
This is of course the first thing I tried, but as I said, there is no entry for Oracle 11g in my "Programs and Features" applet.
2. Download the install package and run OracleXE.exe with the remove iss file.
Firstly, there is no OracleXE.exe in the package I downloaded, just setup.exe;
Secondly, setup.exe ignores the iss parameter and tells me that OracleXE is already installed (setup.log contains ResultCode=-3) so it can't be installed.
Is there somewhere else to get an OracleXE.exe that will work for 11g? Or are these the instructions for 10g and haven't been updated yet?
Am I unusual in not having a Control Panel entry?
(and I understand this is a beta - that's partly why I'd like to uninstall it - I'll go back to 10g and not be so impatient :))
Regards,
Andrew

ICloud setup for Family to only share Apps

Okay, so I've tried reading through several different articles to figure this out but I'm not getting anywhere so I'm hoping there's somewhere here with a similiar setup that can just give the basic setup. So here's what I want to do, I want to be able to setup icloud on each of my families devices so they are backed up into their own accounts but I also want to make sure that App's are shared across the devices. Here's the setup that I have:
1. For Myself I have an iPhone and a iMac
2. My wife has an iPhone and a Macbook
3. My son has a iPad
Now right now everyone is linked up to my Apple ID since that's the account in which all the Apps are purchased and the billing information is linked up to. I want to setup each device with an icloud account as well so our informaiton can be backed up but I don't want information crossed over between devices (for example I don't want all the contacts from my wife's phone on my phone nor do I want our messages sharted on my son's iPad). I'm not sure on how I can go about this since right now each device is hooked up to my Apple ID (so we can use the Find my iPhone app as well for each device) so I don't know if I create a separate account for everyone if that will still work or if I need to know each login and password. I also want to setup a icloud e-mail account that I can use for the iMac and my iPhone only, and the same setup for my wife and her Macbook. Any help would be great, thanks.

To avoid sharing and merging your iCloud data, you will need to put each person's devices on a separate iCloud account with a separate ID. You can continue to all share the same ID for iTunes; it does not need to be the same as the ID you use for iCloud.
Creating separate accounts will keep everyone's iCloud data separated, and give each person's devices their own 5GB of free storage for their device backups, and a separate iCloud email account/address. However, Find My iPhone (iPad, iPod, Mac) is tied to the iCloud ID so they cannot be tracked together on the same map. You will have to sign into each iCloud account separately (on icloud.com or the Find My iPhone app) in order to locate devices using that iCloud ID.

ActiveSync autodiscover not working for iPhone but for Android and Windows Phone

Hi
We have setup an Exchange 2013 hosted environment, where different mail domains are running on it.
The main domain is mydomain.com. One of the client domains is customer.com.
Autodiscover for customer.com has a cname which points to autodiscover.mydomain.com, on our firewall this url is redirected to autodiscover-s.mydomain.com, where our public certificate for mydomain.com is applied. Autodiscover for all
our customers finally ends at autodiscover-s.mydomain.com.
Outlook WebApp, Outlook Anywhere and ActiveSync for all customers is reachable through mail.mydomain.com.
Everything works fine, except of autodiscover for iPhones. I always have to enter the server name mail.mydomain.com manually. After that ActiveSync works on iPhones as well.
The Problem doesn’t exist on Androids and Windows Phones.
Any suggestion?
Regards
Peter

Yes, Interestingly same configuration is working in my home lab, but not working at customer. The version is 10.5
Cannot say wireless issue as jabber for windows is working from wireless

Setup my iphone to my laptop

How can i setup my iphone for the 3G network with my laptop or how can i use it to connect?

If I understand well, the problem is AT&T or more precisely the agreement btw AT&T and Apple; not the iPhone itself.
I live in South Africa and have bought my iPhone without any linked contract/plan and the iPhone is unlocked (I can chose my carrier). You can reply "why are you complaining? Lucky you!". The true is that I had to pay roughly $800 for the iPhone without any data included!
So if it's really a problem with AT&T... I think it's unfair for people like me who have paid a huge amount to enjoy freely the iPhone!
As you know (or don't) all iTune stores don't offer the same app. You have access to softwares that I'm not allowed to download just because living in Belgium and South Africa, I have to go through the Belgian store (my credit card is a Belgian one).
Can anybody tell me why Apple does not release tethering country by country, type of contract by type of contract if it's really an AT&T problem? Down here, with an HTC, you are allowed to tether - not that I want to go Windows, I'm not creasy ... What is the difference with buying a usb stick except that I will have to pay a bit less than $200 (the price over here) to get one (that money is even not for the carrier!)
Thanks

POP3 & IMAP Email setup for both Wifi & Cell use separately...

Hello,
I was asked to post info about this by an iPhone support rep.
I initially had lots of trouble setting accounts for use with both my WiFi home and office networks and for use through the ATT cell network.
If you have a question as to how to setup email for both WiFi and Cell use, answer is you can't configure these manually and you don't want to...the phone does this automatically...and seamlessly. (you will NOT see the change in the advanced settings menu, this occurs internally, the settings appear the same)
The problem: Accounts changing settings automatically...when manually configuring two separate accounts with the same email address but trying to setup the outgoing settings for different ports...one for WiFi (your broadband server acct / port 587) and one for Cell (cwmx.com / port 25)...THIS WON'T WORK!! My WiFi configured email accounts would automatically switch to Cellular configured email accounts as long as they had the same email address. Even though I gave them different names, the phone looks at the "actual email address" and if they are the same it changes your configuration to match the other account (it does this by matching the account that was either ON or OFF first and as soon as you match the second account to that setting (either ON or OFF) the phone switches the settings to match the first account.
The Solution: (End of the Story first for those who have or are facing this problem): Be sure to setup the email accounts for use with your WiFi account first (and ONLY), as when you leave the WiFi area or turn off the WiFi setting the email account will automatically reconfigure itself for use with the ATT Cellular network...then the settings will switch back when you re-connect to the WiFi area(s). The settings that you will "SEE" are your setup for WiFi, this will not change even when using the Edge network (at least not what is displayed in the "advanced" menu). You will still see Port 587, even though the phone is changing setups internally and changes back once back on a WiFi network, you just don't see the changes.
*I hope this helps!*
(more details below for those who might be interested and _for those who may be trying to setup using COMCAST Broadband_)...
My issue began because I could not get my Comcast setup to work for outgoing email. So I was advised to setup for the Edge port settings by an iPhone support person from ATT...this was a huge error. Because I attempted to do this it actually kept the phone from smoothly converting settings as needed. I only discovered this after resolving the actual problem with my WiFi (Comcast Broadband settings) issue which was actually the setup that MUST HAVE a user ID and Password, at least when using a Comcast Broadband account. Unlike the rest of my XP and ME computers on my networks which do not require this info, the iPhone DOES.
Because I could not get outgoing mail to work with my broadband setup I attempted to setup two accounts for each email address...one for Cellular and one for WiFi for when I would figure out my problem...or for just sending email more quickly. This does not work as the conflict causes a nightmare. This is something the iPhone support folks should have explained but failed to do so, perhaps as they didn't know this?
Bottom line: Let the phone do the choosing...it works great and will avoid YOU wasting TWO DAYS and more than 12 hours on the phone with iPhone Support as I did. I eventually figured the port switching issues and solutions on my own through trial and error and luckily one bright iPhone support person advised me that he knew for sure that when using the iPhone with Comcast you must setup "outgoing settings" using an "ID" and "Password" which I was provided by Comcast in only a few minutes. I don't use their emial account but I setup one just for this purpose. Once done, my email accounts began working normally. Once I resolved the conflict issues listed above the phone now works great both WiFi and Cell.
-Rich

fullspool,
Comcast offers an authenticating SMTP server that should work for you on WiFi and EDGE both.
The settings are linked in this Apple knowledge base article:
http://docs.info.apple.com/article.html?artnum=306074
The Comcast link is:
http://www.comcast.net/help/faq/index.jsp?faq=Emailtop18913
From that link the settings are:
Your email address: [email protected]
The email server type (POP)
Incoming mail server: mail.comcast.net
Outgoing mail server: smtp.comcast.net
With SSL on for both incoming and outgoing.
Hope this helps,
Nathan C.

Setup for iphone 4

Similar Messages

Maybe you are looking for