"Setup initialization error" cant extract jmf !!!

Hi !!!!!!
i am a newbie here, and after searching the internet and these forums for hours, i couldn't find a solution...So please HELP ME !!!!
i had successfully installed JMF 2.1.1e earlier and it was running fine, but when i uninstall it , and again tried to re-install it, it is not even extracting !!!
the error box is:-
Setup Initialization error
"Setup is unable to run a program needed to proceed with the installation. Restart your system and try again.
Error - 105. "
please advice me what to do, its an emergency !!!!

So nobody can help me...
If there's no solution for my problem, I want to try to install an old version of JMF. Where I can findit?

Similar Messages

  • Setup Initialization Error

    Mar 14, 2010 Setup Initialization Error My computer recently crashed. I got it repaired but in the process, most of my programs were lost including Adobe PhotoShop 7.0. I tried re-installing from the CD but got an error message which read: Setup Initialization Error. Setup is unable to find a hard disk location to store temporary files. Make at least 3089KB free space available and then running setup again. Error 101. Then I received another message: "Could not complete your request because of missing or invalid personalization information." Can anyone help fix this situation? Thank you. Kind personal regards,

    And? What operating system? What language? What computer? User account? Sorry, such vague statemts will never get you the help you may need. This is mostly a system problem...
    Mylenium

  • Error reading setup initialization file

    I am trying to download and install
    J2SE v 1.4.2_04 SDK and
    J2SE v 1.4.2_04 JRE
    on a Windows XP platform SP1. The machine is a dual XEON 3.0 G machine with 1G of memory.
    I downloaded the software and saved it to my desktop. When I double clicked on either application I get a dialog box with the following message...
    "Error reading setup initialization file"...This message appears in a dialog box with no header and no lettering in the button to dismiss the dialog box.
    I tried looking through the forums and contacting SUN without any success....Can someone help me?

    Update to previous post
    I found the source of the error. Either the firewall server or proxy server that our site is using had altered the file. Both servers do some type of 'content' filtering for viruses, etc. To confirm this, I downloaded the file while at another site and then compared the two files. There was differences between the two files. The alteration wasn't enought to completely break the executable, but enough so that InstallShield couldn't run properly.

  • Installing JRE 1.4.2_04 error: Error reading setup initialization file

    I'm getting the following error when trying to install the Java 2 Runtime Environment.
    Diaglog box containing message: Error reading setup initialization file.
    I get this error on any of the installers for Java 2 Runtime Environment, Standard Edition 1.4.2_0x; Windows Platform; Windows Offline Installation and Windows Installation.
    I do not get this error with the installer for Java 2 Runtime Environment, Standard Edition 1.4.2.
    According to the InstallShield web site, this error is caused by an invalid setting for the MSI Engine Location property in the release. See Q105447 on the InstallShield web site Knowledge Base.

    I doubt that the root cause is the modification of the file because of the following:
    - I have a machine (XP) on which I downloaded j2sdk-1_4_2_09-windows-i586-p.exe and was able to run the install without issue.
    - I then mounted a drive on a windows2003 machine and copied the same file to it, the file size was exactly the same. When I ran the install, I got the error "Error reading setup initialization file" and the button with no text.
    - I searched through google and found this thread. I used pkzip to package the file and on the original platform, copied it to the 2003 machine and unzipped it. Once again, the same error showed up.
    The explanation for the error provided in this thread is not plausible because:
    - there are no firewalls/proxy in play in a file share
    - the same thing happens when the install is transferred through a zip. Something would need to alter the zipped file in transit without corrupting the zip itself for this explanation to be valid. This is simply not plausible.
    There is clearly something going on that has yet to be explained. An explanation of the problem and (even better) a workaround would be welcome.

  • I cant open itunes cause quick time failed to initialize (error - 2096)

    i cant open itunes cause quick time failed to initialize (error - 2096)

    hmmmm.
    doublechecking something before proceeding ... are any boxes ticked in the Compatibility tab for your QuickTime?
    (i've seen that message produced when some of the Display Settings boxes in there are ticked, not just the compatibility mode one.)

  • Palm Desktop 6.2 Install - "Error reading setup initialization file"

    I am trying to install Palm Desktop 6.2 and HotSync Manager on Win Vista Home Premium 32-bit.
    When I execute PalmDesktopWin62.exe I get a message “Error reading setup initialization file.”
     I am installing this to sync my Sprint Centro via usb.
     Thanks for any help
    Post relates to: Centro (Sprint)
    Post relates to: Centro (Sprint)

    I had this problem as well. I solved it by using an old Palm Desktop download instead of the one that Palm is providing now. My old copy was provided as a zip archive and the single file in the archive was named simply setup.exe. I guess the only difference between my old file and the file that Palm provides now has something to do with the installation software (it may be InstallShield; I don't remember for sure). In any case, if you are having this problem you might be able to find a usable file out there somewhere.

  • Cant extract and install JAI installation packages

    Hi all
    I am new to JAI and i tried installing the setups i obtained from the page.All the setups are showing same error after extraction saying
    A dialogue box pop ups saying "cant run 16 bit windows program". the content is "cannot find file c:\..\..\..setup.exe or its components ensure path and file names are correct and all libraries are available.
    Please guide me..it is very very urgent..any help is appreciated.
    Regards,
    Aravind

    Internet settings are specific to the network that you are using, so you need to ask your network providor to send their settings direct to your phone. This will come as a message which you enter an activation PIN into and the settings are saved to your phone.

  • Photoshop CS6 "failed to initialize" error...

    hi, everyone.
    i tried to install photoshop CS6 but i got "failed to initialize" error message.
    i tried everything in the web site http://forums.adobe.com/message/2786497#2786497 but it didn't work out.
    i uninstalled all adobe product with appcleaner than try to install but it didn't work.
    i opened in the safe mode but it didn't work out.
    i don't want to install MacOSX again if that's the solution.
    Please Help...
    My Operating System:
    Mac OS X 10.8.2
    My PDpp.log:
    Mon Feb 11 00:03:31 2013
    [INFO] PIM - START installPackage at file /Volumes/CS6 MstrColl/Adobe CS6 Master Collection/packages/UWA/UWA.pimx
    Mon Feb 11 00:03:32 2013
    [WARN] PIM - RemoveQuarantineInfo from File /Users/Murat/Applications/Adobe/OOBE/PDApp/install.sig .
    Mon Feb 11 00:03:32 2013
    [INFO] Setup - TimeLog: End Installing. Now launching PDApp
    Mon Feb 11 00:03:32 2013
    [FATAL] Setup - Adobe Application Manager executable does not exist at the location: /Users/Murat/Applications/Adobe/OOBE/PDApp//core/PDApp.app/Contents/MacOS/PDApp
    Mon Feb 11 00:03:32 2013
    [FATAL] Setup - Unable to launch PDApp
    Mon Feb 11 00:03:34 2013
    [INFO] Setup - =================  Exiting Installer with Code: 0  =================

    thank you for your answer.
    But, i already deleted all adobe products with appcleaner unfortunately so i don't have any uninstaller to run.
    after deleting adobe products. i only install adobe flash player and adobe reader.
    i run the adobe creative suite cleaner tool, it didn't find any session to delete even if i use option "All" at the top of right corner in the program.
    now i only have flash player and reader, what should i do please help...

  • Error "No extraction structure for event I3" running set up 2LIS_17_I3HDR

    Hi, Experts:
    I am trying to activate and run set up datasource for PM 2LIS_17_I3HDR, so that data can be extracted from R/3 into BW 3.5 system.
    In R/3 environment, we have 2 clients. client 200 for configurations but has no data, and client 230 has data but can not change configurations.
    I have done the following in client 200:
    - Activated datasources for for PM 2LIS_17_I3HDR in RSA5.  
    - Made selection in RSA6.
    - Activated extract structures and datasource for application 17 in LBWE and also ran job control. Now I can see the extract structures for application 17 are active in client 200 only, but inactive in client 230. I tried to turn then active in client 230 but got error "Client 230 has status not modifiable".
    - I assume I should run set up tables in client 230 because it is the client with data in tables? But when run set up in OLIIBW, I got the error "
       No extraction structure for event I3: Messages active
       Message no. MCEX106
       Diagnosis
       You called the setup for the extractor structures of application '17' (Plant Maintenance). However no extractor structure is active for event I3 (messgaes).
       System Response
       Data for event I3 is not transferred to the BW interface.
       Procedure
       First activate the desired extractor structures for application '17' using the Customizing Cockpit and then start the setup again."
    - I can not manually activate extract structures in client 230 because it is not modifiable. I tried moving transports, the path is not set up. I see extract structures for other applications like 11, 13 are active. So I guess there may be other ways to activate the extract structures in client 230.
    - I also tried to run set up in client 200, which has extract structures for 17 in active status. But got the same error as client 230.
    Would anyone please help me with what to do to fix this?
    Thanks,
    Jenny
    Edited by: Jenny Chen on Oct 29, 2009 6:38 AM

    Hi, thanks for the reply!
    Just update for what we did to solve this. Both clients are for development. Client 200 is only for configuration but no data. Client 230 has data but not modifiable. Usually, when we create a structure, table, program, or active anything in 200. We will see it in 230 right away without transports. But this is not the case for activating extract structure for datasource from Business Content. We end up having Basis guy manually activate the structure for us directly in client 230 with transaction LBWE. That worked.
    Thanks,
    Jenny

  • MAX Reports-Initialization Error, Editing Components missing?

    Using a NI PXI-1042Q and an 4472B Daq card to capture data.  Running LabVIEW 8.2 on a Windows XP system.  The program controls an MID7604 which controls a motor.  Using a program that was written and is now an executable.  To run the program minor file related inputs are required, the motor moves to calibrate its' position, then a test piece is requested to be adjusted.  After the adjustment, file request information is acknowledged (location for data to be placed is ok'd). 
    After pressing OK, the following error message is generated: 
    [ ERROR-200428 occurred at DAQmx Start Task.vi, Possible reasons: Value passed to the Task/Channels In control is invalid.  The value must refer to a valid task or valid virtual channels, Then it identifies the Task Name: __________.] 
    This of course refers to the Task/Channels IN input of the DAQmx Start Task.vi, which points to the task that was setup, not being setup properly or not there.  In our case, it was there and has somehow been removed.
    When going to MAX and trying to setup a new Task:  Data Neighborhood --> Right Click --> Create New NI DAQmx Task,
    the following message is generated:
    !INITIALIZATION ERROR
    Some components required for editing are missing.  Please contact National Instruments for more information. 
    We have already viewed the NI-DAQmx Error-200428 message, and also tried the "How Do I Recover From MAX Database Corruption?" procedure, no change. 
    Please respond. Thanks.

    Typically with an executable you only have the run-time versions and I don't think you can create a task with just the run-time. Somehow the hardware configuration has been corrupted. If you can find the original .nce file that was used on the development system, you can just import that I believe. Otherwise, you may have to install full versions of DAQmx.
    The reliance of existing tasks in MAX is one reason that I avoid them and create everything in the LabVIEW program. Just one thing to keep in mind.

  • After iTunes 7.6 update:  QuickTime failed to initialize (error -2096

    "QuickTime failed to initialize (error -2096).
    QuickTime is required to run iTunes. Please reinstall iTunes."
    After upgrading to iTunes 7.6 this morning, I get this error when trying to run iTunes or Quicktime. I was using the Apple Updater. I got no errors when running the installer.
    I downloaded the 7.6 setup file and attempted to repair the install. I still receive the same error.
    There is an article indicating that turning off Compatibility mode would resolve this issue, but Compatibility mode is not turned on for iTues or QuickTime.
    The same issue is discussed in the Quicktime forum, here:
    http://discussions.apple.com/thread.jspa?messageID=6400305
    I am running on Windows 2003.
    Note I had iTunes open earlier today, and it was working fine. It was only when I upgraded to 7.6 (I think I was at 7.4 before. It was definetly 7.something).

    Thanks for this discussion and I hope Apple fixes this soon. It took me forever but installing QT 7.2 and installing the less recent itunes update from filehippo finally resolved it for me. Of course the reason it took me forever was that every time I reinstalled itunes, I was using the default setting that was updating QT & Apple also (in hindsight it sounds really dumb, but no one had mentioned that).
    This is the first itunes update that has ever gone wrong for me - I've used itunes for 5 yrs (my 1st ipod was a 2nd gen touch wheel). I wonder if some MS developers went to work at Apple to exact revenge...?

  • LO cockpit - SD Billing setup-initialization performance

    Hi,
    We are planning for initialization of SD - billing data (2LIS_13_VDHDR & 2LIS_13_VDITM). We have almost 30 millions of records in VBRP table. Client requires data for last 3 years which is still more than 15 million records.
    For performing SD Billing setup in ECC (OLI9BW) we have 3 fields for selection - Company Code, Sales Org & Billing Document. (No idea why Billing date is not provided along with it?? )
    As about 95% data comes from 1 Company Code+ Sales Org, we are not able to use these fields for parallel setup jobs. And for billing documents, customer is using customized document number range depending on the Location/Year/doc type logic, which is also impossible to use for doing setup.
    Without any selections, it takes around 3 days to complete the setup, and it is impossible to take downtime on ECC for 3 days for this activity.
    Is there any other way by which we can reduce the total setup time & ultimately downtime required for setup/initialization?
    Or is there any possibility to use Billing date in the the selections for setup?
    Request you guys to help if anyone has performed setup in such scenario,
    Thanks,
    Vikram.

    Issue resolved,
    I will be performing following steps -
    First change the existing data flow to have an DSO in between.
    (Datasource VDITM/VDHDR --> DSO --> Infocube)
         1. Delete setup table and delta/extraction queue.
         2. Execute Init without Delta infopackge from BI for VDHDR/VDITM -> This will mark delta pointer in ECC for the datasource.
         3. Run the setup jobs (divide entire document range in about 5 sets and schedule parallely)
         4. After completion of setup, execute Full repair infopackage with last 3 years selection.
         5. Update data from PSA
         5. Then Schedule jobs to send data from LBWQ to Delta Queue in LBWE.
         6. Schedule Delta infopackage
         7. Schedule DTPs in BI accordingly
    While setup job is running there may be some documents which will be in Setup table and LBWQ as well, but as I have introduced DSO in between it will take care of these duplicate data.
    Thanks,
    Vikram.

  • SAPCAR error when extracting kernel patches

    Hi gurus
    I am having the following error when extracting so kernel patches:
    SAPCAR could not open for writing sapcar.exe <error 28>.The process cannot acces the file becaues it is being used by another process.
    Maybe its saying that because sapcar is the on that is extracting this patch an now it cant open it.i have followed not 211077 but still not winning.
    on Windows2k3 64bit
    Any ideas welcome

    you can rename the sapcar.exe to oldsapcar.exe and execute oldsapcar.exe
    or  you can move to a different directory and execute from there.

  • Error while extracting the data in R/3 production system,

    Hi Team,
    We got the following error while extracting the data in R/3 production system,
    Error 7 When Sending an IDoc R3 3
    No Storage space available for extending the inter 44 R3 299
    No storage space available for extending the inter R3 299
    Error in Source System RSM 340
    Please guide us to fix the issue

    It´s very difficult to help you without knowing
    - what is going to be transferred
    - where you get this error
    - system configuration
    - actual memory usage
    - operating system
    - database and configuration etc. etc.etc. etc.
    I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
    Markus

  • Error during Portal Setup: An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount

    Error:
    Configure Portal Setup
    An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
    Errors in the Log:
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
    Any ideas?
    David Baur

    I finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
    David Baur

Maybe you are looking for