Setup log file Critical errors
if i start the setup it says Critical Errors Found In Setup Please See The Setup Log.File For Details
You need to provide the logs and tell us more about your system. Please refer to this page for info on where to find the logs (in the CS5 section).#
Mylenium
Similar Messages
-
Critical errors were found in setup. Please see setup log file for details.
What fixes this problem in IE? I have read a lot of forums with many replies saying they got by it, but they never explain how. One guy posted a link, but the link is dead now.
I need to know how to fix this problem. Only thing I can gather is its a Java issue, but my java is up to date. In fact I just reinstalled it make sure that it was updated.
With as many people having this issue I can't believe I have not found something from Adobe on this issue.
Regards,
ScottI run the setup file and it does the checking system process... then goes into the actual install menu and not more than 10 seconds into that 2nd menu I get "critical errors were found in setup. Please see setup log file for details". That is all I can get out of the install.
The message window that I get the error in indicates windows Internet Explorer.
That is the my entire process. I have searched and found the log file and I have looked through it, but I am having a hard time finding the actual cause of the error. Out of shear frustration I removed all my adobe products and tried the install again and had the same exact problem. So I know there is something stopping me some where... just don't know what it could be.
Thanks,
Scott = -
I recently tried testing Server 2012 for installation and I had a major issue. Windows 8 also uses the same method for installation so this should also apply to Windows 8. I thought this might be helpful for other people who have the same
problem. My setup is a 1U server with no DVD drive, no hard drives, and only USB. I have a new hard drive that I wanted to install Server onto, so I put it in and ran the installer off a thumb drive. I kept receiving the following error when
I tried to format the hard drive and proceed with the installation:
"We couldn't create a new partition or locate an existing one. For more information, see the Setup log files."
After hours of troubleshooting, I determined my problem was I was using a thumb drive to install it, and Windows didn't like it. Some people had similar issues when similar devices were plugged in (i.e. external hard drives, SD cards, CF cards, etc).
In my case, it was the installation drive itself was a thumb drive. I ended up digging up an external DVD drive and placed the installation onto a DVD. Worked flawlessly. Now I am up and running.
I tried
the steps here to no avail.
Hope this helps anyone else with the same problems.Hi,
Thanks for sharing. We really appreciate your time and efforts. Hope your experience will help other community members facing similar problems.
Leo Huang
TechNet Community Support -
Hi All,
I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out
The log file stated that there were ongoing connections of HRC with the CCX (I am sure there isn't any active login to HRC)
|| When you tried to login the following error was being displayed because the maximum number of connections were reached for the server . We can see that a total number of 5 connections have been configured . ||
1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
|| Below we can see all 5 connections being used up . ||
2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
|| Once the maximum number of connection was reached it threw an error . ||
3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
Current exact UCCX Version 9.0.2.11001-24
Current CUCM Version 8.6.2.23900-10
Business impact Not Critical
Exact error message All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
What is the OS version of the PC you are running and is it physical machine or virtual machine that is running the HRC client ..
OS Version Windows 7 Home Premium 64 bit and it’s a physical machine.
. The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ?We have had this "PRX5" problem with Exchange 2013 since the RTM version. We recently applied CU3, and it did not correct the problem. We have seen this problem on every Exchange 2013 we manage. They are all installations where all roles
are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth. None of those "solutions" made any difference whatsoever. The occurrence of the temporary error PRX5 seems totally random.
About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
Most people don't ever notice the issue because remote mail servers retry the connection later. However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
simply fail. Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
Is Microsoft totally oblivious to this problem?
PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
JSB -
SCCM 2007 R2 Copying the sms setup log files ( C:\ConfigMgr*.lo*) failed.
Copying the sms setup log files ( C:\ConfigMgr*.lo*) failed.
Copying setup logs failed...
Backup task completed successfully with zero errors but there could be some warnings, AFTERBACKUP.BAT will be started if available in its predefined locationJust for the record!
Check the permission of the folders SCCMBkp$ and SCCMBkpArch$, compare with a server that is working. Alfter that restart the services: (SMS_SITE_VSS_WRITER and SQL Server VSS Writer). Then Open the Smsbkup.log and restart the SMS_SITE_BACKUP and check the
logs to see if works. -
Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account. -
One or more required office component failed to complete successfully for more information, consult the setup log file. while uninstallation of sharepoint 2013
go to start > run > type %temp% > here check for latest file and provide us details in that log file
If this helped you resolve your issue, please mark it Answered -
Habe mir einen neuen Laptop bestellt (Win 8.1) habe auf diesem die Installation ohne Probleme durchführen können. Der Laptop musste aber wegen technischen Defekts gegen einen neuen getauscht werden.
Auf diesem funktioniert die Installation nicht mehr.(Fehler siehe oben in Threadbeschreibung) Habe auch schon nach Lösungen gegoogelt - die Tipps von "Neu aufsetzen" bringen mir nichts da der Computer nagelneu ist.
Der Fehler kommt sowohl beim installieren von CD und bei der heruntergeladenen Version.
Wo ich dieses Log-File finde weiß ich nicht.
Daten zum Laptop (Falls diese benötigt werden) Dell Inspirion 15 7000er Serie mit einem i7 2,0Ghz, 16GB Ram, 2Gb Grafikkarte und Windows 8.1 64bit.
Habe die CD auf dem Rechner von meinem Dad (Win XP SP3) versucht zu starten, dabei entsteht der gleiche Fehler.
Vielen Dank jetzt schonmal für die Hilfe
SvenHabe mein Windows nun doch nochmal neu installiert - siehe da es funktioniert.
Schwach finde ich von Adobe keinen Support mehr am Telefon anzubieten. Mag zwar sein das Cs4 nicht mejr aktuell ist aber dennoch zu sagen es gibt keinen Support mehr ist schwach! Die Damen und Herren in der Geschäftsleitung mögen es zwar nicht glauben aber es gibt auch Menschen auf diesem Planeten die nicht mit Geld um sich werfen können.
Ich wünsche mir für die Leute da oben auch mal ähnliche Probleme in einer Autowerkstatt wenn sie mit ihren Oldtimer ein Problem haben und dort dann gesagt wird das dieses Fahrzeug leider nicht mehr repariert werden kann weil es zu alt ist.
Danke an die Hilfe die ich bekommen habe - auch wenn sie nicjts gebracht hat. -
hi
I'm receiving install-setup error messages
does driver setup create a log file during install?
how would I' find setup.log if one exist,so that I' may post my error messages?
SB LIVE CT4830
Sound Blaster Li've!
Value/Player Compaq /Intel/IBM/NEc
driver info:
sblw9xup.exe
ver2.02.00
win98 se
thank youMessage Edited by HELP2 on 05-0-2007:8 AM
Message Edited by HELP2 on 05-0-2007:22 AMYou need to provide the logs and tell us more about your system. Please refer to this page for info on where to find the logs (in the CS5 section).#
Mylenium -
SQL Server not Starting Up - Could not open error log file system error = 5(Access is denied.)
Hi guys,
I am working on issue with SQL Server 2008 R2 .. we rebooted the server and after that all SQL services is not coming up. below is the error from eventlog...
SQL Server running under NetworkService account and has full control on this files..
from Config Manager ....
The request failed or the service did not respond in a timely fashion....
From Event log..
initerrlog: Could not open error log file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'. Operating system error = 5(Access is denied.).
Any idea or workaround..?
Thanks..
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to TeachFinally I found solution and was able to bring back online the SQL Services...
I had a very similar issue with the following error (event log):
Description:
The SQL Server (MSSQLSERVER) service terminated with service-specific error 17058 (0x42A2).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17058
Date: 19/05/2012
Time: 10:20:14
User: N/A
Computer: NSQLXX
Description:
initerrlog: Could not open error log file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
Operating system error = 5(error not found).
In this case the ERRORLOG file had been marked as read only. This was following a scheduled automated boot. -This
was culprit
MSSQL wouldn't not start until this file had been changed.
http://www.experts-exchange.com/Database/MS-SQL-Server/Q_23951723.html
Thanks everyone for your kind replies and time...
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach -
With alert configuration we can send notify user when there is an error.
Is there a way to write a log file when there is an error (assume no BPM used).There are a couple of things you can do to create a log file:
1. You can create a custom alert and trigger it by generating an exception in your message mapping. This can be done using a user defined function. In the same user defined function you can call a communication channel to write the error log file.
2. You can create 2 interfaces the first one is your main interface, in that interface donot error out the interface in the message mapping. Populate a certain error value in the target and use that value in another message map to create another map with the error
IntfA -
> UDF (Error --> X) ---> Target (<field Z>X</field>). --> IntfB
IntfB -
> Check value for X in field Z to populate the eror records to the target structure --> intFC.
Same condition u need to put in the rcvr determination so that it doesnot give an error. -
Trans.log file showing 'ERROR = CONNECT failed with sql error 12541'
Dear All
We have upgraded our datatabse from Oracle 9.2.0.8 to Oracel 10.2.0.4 on our ECC 5.0 IS-AFS SAP system. When we check version from SQL, it's showing 10.2.0.4. That means database is successfully upgraded. Now, when we login through our <SID>adm user and checking R3trans -d, it is showing
'This is R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
R3trans finished (0012).'
In the trans.log file it is showing,
4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.06.2009 - 11:56:40
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Jun 22 11:56:40 2009 110 0.000
110
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000
137
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 62 0.000
199
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000 77 0.000
276
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000 8142 0.008
418
4 ETW000 [dev trc ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000 43 0.008
461
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000 61 0.008
522
4 ETW000 [dev trc ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000 421 0.008
943
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000 46 0.008
989
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000 75 0.009
064
4 ETW000 [dev trc ,00000] New connection 0 created 48 0.009
112
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.009
165
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 55 0.009
220
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 53 0.009
273
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 49 0.009
322
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000 521 0.009
843
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 84 0.009
927
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 65 0.009
992
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 2033 0.012
025
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPVAP's password 49 0.012
074
4 ETW000 [dev trc ,00000] Connecting as /@VAP on connection 0 (nls_hdl 0) ... (dbsl 640 1
80309)
4 ETW000 57 0.012
131
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 49 0.012
180
4 ETW000 [dev trc ,00000] 0 UTF8 1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000 58 0.012
238
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 48 0.012
286
4 ETW000 [dev trc ,00000] Allocating server context handle 42 0.012
328
4 ETW000 [dev trc ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000 95 0.012
423
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 4556 0.016
979
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000 59 0.017
038
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541 39 0.017
077
4 ETW000 [dev trc ,00000] Try to connect with default password 184 0.017
261
4 ETW000 [dev trc ,00000] Connecting as SAPVAP/<pwd>@VAP on connection 0 (nls_hdl 0) ...
(dbsl 640 180309)
4 ETW000 46 0.017
307
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 48 0.017
355
4 ETW000 [dev trc ,00000] 0 UTF8 1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000 48 0.017
403
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x1113b99f8)
4 ETW000 54 0.017
457
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x1113b97d8,srvhp=0x1
113b99f8)
4 ETW000 54 0.017
511
4 ETW000 [dev trc ,00000] Deallocating server context handle 0x1113b99f8 42 0.017
553
4 ETW000 [dev trc ,00000] Allocating server context handle 33 0.017
586
4 ETW000 [dev trc ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000 54 0.017
640
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 2547 0.020
187
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000 45 0.020
232
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541 28 0.020
260
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 428]
4 ETW000 220 0.020
480
4 ETW000 [dblink ,00428] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 428]
4 ETW000 42 0.020
522
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
Checked the listener service. It is already started and status is OK. Please help.
Regards
Shashank ShekharHi
Yes, I am trying it with orasid user also. There in trans.log file it is showing:
'4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.06.2009 - 15:54:42
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Jun 22 15:54:42 2009 109 0.000
109
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000
136
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 61 0.000
197
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000 79 0.000
276
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000 8174 0.008
450
4 ETW000 [dev trc ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000 43 0.008
493
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000 61 0.008
554
4 ETW000 [dev trc ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000 430 0.008
984
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000 46 0.009
030
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000 76 0.009
106
4 ETW000 [dev trc ,00000] New connection 0 created 48 0.009
154
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.009
207
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 57 0.009
264
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 54 0.009
318
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 49 0.009
367
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000 526 0.009
893
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 84 0.009
977
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 64 0.010
041
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIEnvCreate(mode=16384)' failed: rc = -
1
4 ETW000 1464 0.011
505
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code -1 40 0.011
545
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
4 ETW000 58 0.011
603
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error -1 performing CON [dblink#3 @ 428]
4 ETW000 74 0.011
677
4 ETW000 [dblink ,00428] ***LOG BY0=>Cannot get Oracle error text. [dblink#3 @ 428]
4 ETW000 55 0.011
732
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
Someone suggested 'The solution is to download the new oracle client dll into the kernel'. Can anyone tell from where i can get the client dll for the kernel.
Regards
Shashank Shekhar -
Error Details Missing in log files for errors on U.I.
I am working with Weblogic Portal Server 9.2 on windows XP system with oracle 10g database. I have kept separate schema for appGroupspace data-source, and all other tables in main.
All my collaboration portlets are working but all groupspace portlets are showing error "An error occured while processing your request. Please try again or see your System Administrator".
All that I can fing in error logs in message "Cant find the primary instance for the portlet [{0}]. The portlet will be served in file mode".
Is there some way I can find the stack trace of these errors?
Any clues can be helpful as I'm stuck..Hi, I followed all the steps correctly and also the owner of the directory is correct.
But i have not installed the patches which is listed at the bottom of the link page.
I had done this on RHEl and i had no problem but now i am getting problem on solaris. -
Ok so back in August 2014 I succuesfully used bootcamp to install Windows 10 Tech preview. It worked great until March of this year when Windows issued an update (Which I had no control over). After this update the R9 4GB graphics card driver stopped working. I contacted Apple/AMD/Microsoft but was unable to fix this problem.
So, I uninstalled Windows 10 through bootcamp and restored the drive to a single partition. I purchased windows 8.1 and downloaded Windows Enterprise edition (as this comes as an ISO file) and started the process again with Bootcamp. Everything works great until I get to the installation of windows.
I did the same as last time (formatted the Bootcamp partition) and tried to continue the installation. I now get the following message:
I have tried a complete reinstall of the system twice (back to factory settings) but still the same issue. I have also tried using Windows 10 Tech preview but still the same issue. (I only have my remote drive with the ISO file connected to the mac and have tried with a USB stick)
Any ideas would be much appreciated! ThanksThank you for your prompt response. Please see below:
Last login: Thu Apr 30 09:15:48 on console
Jeremys-iMac:~ jeremygaster$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 121.0 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 999.3 GB disk1s2
3: Apple_Boot Recovery HD 650.0 MB disk1s3
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *1.1 TB disk2
Logical Volume on disk0s2, disk1s2
E693210D-5893-4CC0-B3FF-18B5A92179CB
Unencrypted Fusion Drive
Jeremys-iMac:~ jeremygaster$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 5BEBA89D-FBF8-45AF-99CF-DFB82BC6B9E8
=========================================================
Name: Internal Drive
Status: Online
Size: 1120333979648 B (1.1 TB)
Free Space: 114688 B (114.7 KB)
|
+-< Physical Volume 2EF54FBF-26BB-4D56-A84E-947205800865
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 120988852224 B (121.0 GB)
|
+-< Physical Volume B66237C5-F9ED-454C-9AFB-90553B0D0E0A
| ----------------------------------------------------
| Index: 1
| Disk: disk1s2
| Status: Online
| Size: 999345127424 B (999.3 GB)
|
+-> Logical Volume Family A91C5378-D285-434D-B33B-5F1E0CC64C62
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: NoConversion
Conversion Direction: -none-
Has Encrypted Extents: No
Fully Secure: No
Passphrase Required: No
|
+-> Logical Volume E693210D-5893-4CC0-B3FF-18B5A92179CB
Disk: disk2
Status: Online
Size (Total): 1114478608384 B (1.1 TB)
Conversion Progress: -none-
Revertible: No
LV Name: Macintosh HD
Volume Name: Macintosh HD
Content Hint: Apple_HFS
Jeremys-iMac:~ jeremygaster$ sudo gpt -vv -r show /dev/disk0
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
Sorry, try again.
Password:
gpt show: /dev/disk0: mediasize=121332826112; sectorsize=512; blocks=236978176
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 236978175
start size index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 236306352 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
236715992 262144 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
236978136 7
236978143 32 Sec GPT table
236978175 1 Sec GPT header
Jeremys-iMac:~ jeremygaster$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 14751/255/63 [236978176 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 236978175] <Unknown ID>
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
Jeremys-iMac:~ jeremygaster$ -
i got the above message when trying to install sharePoint server 2013, please can anyone help on the way forward?
Thanks in anticipation of a swift response.HI,The issue could be of many specific reasons.Please find the below link that gives more information on the issue and the resolution.
http://expertsharepoint.blogspot.de/2014/11/one-or-more-required-office-components.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/
Maybe you are looking for
-
.gif files no longer working when I send them through text
Hello, I've been sending and receiving animated .gif files through Messages on my iphone for a long time without issue. However the last month or so the ones I send no longer animate. They still work if I view them through safari on my desktop comput
-
Is there a way to modify the trace (log) level for trc files in 9.2?
-
Simultaneous Analog Acquisitions
Hello, I use a PCMCIA card DAQ-6062E and LabView 6.1 to simultaneously acquire 2 analog signals whose amplitudes are different (one varies between -0.01 and +0.01V, the other between -2.0 and +2.0V). I use two AI Config VIs, two AI Start and two AI R
-
Can't seem to connect to internet...confused!
Hey guys, I bought a USB wireless device to allow me to connect to the internet with my MacPro (didn't come with an Airport card installed). It was one that I was assured would work and it has installed properly... The problem lies when I'm trying to
-
I've downloaded OS X Mountain Lion from the App store , it still shows download on purchases . I've downloaded multiple times and still shows download in App store purchasesSoftware is showing OS X 10.8.3 .