Setup microsoft exchange server

Hi All,
I am using iPhone4 and would like to setup a Microsoft Exchange mail account to check my compan's mail. I have done all the setting by looking at the outlook settings on my laptop. But somehow it still doesn't work.
Below are the configuration details in the Microsoft Outlook:
1. Server name for account: xxxx.company.com
2. URL to connect the proxy server: https://xxxx.company.com
3. outlook is connecting using HTTP server.
Thanks.

I've only set up one gmail account on an iPhone for a friend of mine. I did it via the Exchange option and I always assumed it worked in the same way as all other mailboxes. When I have an attachment sent to me and I want to pass it on I chose 'Forward' and select 'Include Attachments'. I'm not sure when you simply reply it will include them.
Hope that helps.

Similar Messages

Iphone Email Setup - Microsoft Exchange Server

We have an exchange server and as a result having a little problem getting my email acct setup so I can "send" and "reply" to email... I can now receive email but cannot send/respond..
My IT dept is looking into it and asked me...
If you could find out if that device (IPhone)has a fixed IP address then we can get this resolved pretty quickly.
Suggestions please...
Tom Porter

I've also found sending email via an Exchange server to be problematic (intermittent but mostly not sending). I've laid it to the server I'm using, but this thing is still young. Some other sites also have reported Exchange issues.
Some reports have said Apple is going to address this issue in an update, but since many people were wrong about Exchange support in the first place, I'm biding my time.

Microsoft Exchange Server 2013 Cumulative Update 7 Setup - Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error - Set-SharedConfigDC

What am I trying to do?
I have tried installing Microsoft Exchange Server 2013 Cumulative Update 7 Setup on a fresh install of Windows Server 2012 R2 but it gets stuck when running the setup exe on Step 8 of 14 “Mailbox Transport Service” I have included full
error logs at the bottom of the page but the basics are in order it will throw which loop around are:
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
Exchange is currently running in the envirmonet on 2010 Sp3 I am installing 2013 CU7 fresh so I can migrate the databases over.
What am I running?
2 X DC on domain and forest functional level 2008R2 both writable
1 X fresh install of Windows 2012 R2 which is domain joined
What have I tried?
Checked Ipv6 is enabled on all DC NICS and Existing Exchange Servers
Rebooted every server
Run setup as Administrator
My account is part of the domain Enterprise Admin group
Tried adding "Exchange Server" or "Exchange Enterprise Servers" to the group policy and doing the relevant gpupdate /force and reboot :
Computer Configuration Windows Settings
Security Settings + Local Policies
User Rights Assignment Mange auditing and security log
Turned off firewall on DC and Exchange Server even stopped the service
Turned off all AV on the DC and Exchange Server
Checked I could telnet to global catalog servers on port 3268 which I can
Checked the global catalog records existed in DNS which they all do
Done the obvious ping tests all round which confirms connectivity
Schema has been prepared using appropriate commands before running the setup exe
setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms
Making sure the following path has full permissions:
EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
Restarted Microsoft Exchange Active Directory Topology service
DcDiag all looks good
What have I noticed that is suspicious?
Microsoft Exchange Transport service will not start even though both of its dependences services have started:
Microsoft Filtering Management Service
Microsoft Exchange Active Directory Topology Service
It will eventually error with
“Windows could not start the Microsoft Exchange Transport Service on local computer
Error 1053: This Service did not respond to the start of control request in a timely fashion”
This error is from the GUI wizard itself:
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Exchange logs which have been written:
**The error will loop around for 8 minutes on trying to set-sharedconfig DC whatever this is trying to do ??
[01/20/2015 17:13:20.0084] [2] Active Directory session settings for 'Set-SharedConfigDC' are: View Entire Forest: 'True', Configuration Domain Controller:mydomain.com', Preferred Global Catalog: 'mydomain.com', Preferred Domain Controllers:
'{ mydomain.com}'
[01/20/2015 17:13:20.0084] [2] User specified parameters:
-DomainController:mydomain.com' -ErrorVariable:'setSharedCDCErrors' -ErrorAction:'SilentlyContinue'
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] Ending processing Set-SharedConfigDC
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] An error ocurred while setting shared config DC. Error: The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details
No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Waiting 30 seconds before attempting again.
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0195] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0288] [1] The following 1 error(s) occurred during task execution:
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: System.Exception: Unable to set shared config DC.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
[01/20/2015 17:13:50.0288] [1] [ERROR] The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
        " was run: "System.Exception: Unable to set shared config DC.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
[01/20/2015 17:13:50.0288] [1] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] [ERROR-REFERENCE] Id=AllADRolesCommonServiceControl___ee47ab1c06fb47919398e2e95ed99c6c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/20/2015 17:13:50.0288] [1] Setup is stopping now because of one or more critical errors.
[01/20/2015 17:13:50.0288] [1] Finished executing component tasks.
[01/20/2015 17:13:50.0304] [1] Ending processing Install-BridgeheadRole
Windows Event Viewer:
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=5276) Forest mydomain.com. Exchange Active Directory Provider couldn't find minimal required number of suitable Global Catalog servers
in either the local site 'Default-First-Site' or the following sites:

Hi apl228,
1. Please make sure the IPv6 is enabled.
2. Please make sure the account that install Exchange server has Administrator permission.
3. Please make sure DNS has been configured correctly.
Thanks
Mavis Huang
TechNet Community Support

Exchange 2013 Sp1 says that it is 'Microsoft Exchange Server 2013 Cumulative Update 3 Unattended Setup'

So, I have decompressed my brand new download of Exchange 2013 SP1. This was downloaded from the link at the bottom of the post.
So to start my upgrade I have tried to start by running the schema preparation which then advises me that I am welcomed to:
'Microsoft Exchange Server 2013 Cumulative Update 3 Unattended Setup'
Is this poor QA or was the incorrect file uploaded?
http://www.microsoft.com/en-us/download/details.aspx?id=41994

Hello,
Powershell need full path to file you want to run.
So you should run .\setup.exe instead of just setup.exe.
Hope this help.
Regards, Pavel.

IPhone 6 setup in Microsoft Exchange Server

Currently there is one cell phone in our office set-up on the
Microsoft Exchange Server. It can receive e-mails but cannot always send e-mails from the cell phone. Recently, we tried setting-up an iPhone
6 with the Microsoft Exchange Server and it can send an e-mail from the iPhone; but cannot receive e-mails on the iPhone. Also, the e-mails sent from the iPhone, do not show-up on the user's desktop. Please
help.<o:p></o:p>

Regarding the one that can't send, what happens when they try?
Regarding the one that doesn't show up in the desktop machine, what client is in use on the desktop machine, what version and service pack, and how is it configured to connect?
And what version, service pack and rollup or cumulative update is installed on the Exchange server?
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Syncing ACT contacts while on automatic wireless syncing with Microsoft Exchange Server?

Does anyone know if this is possible? At the moment, my company is automatically performing a wireless sync between Outlook contacts and their Blackberry Curve 8330 devices. However, employees that travel also need their ACT contacts on their phone. I've researched CompanionLink and know that I can get the ACT contacts directly onto the Blackberry that way, but, the problem arises where the ACT contacts will end up syncing back to the Exchange server -- which we don't want. We want to keep the automatic syncing with Outlook, but periodically we want to do a one-way ACT transfer onto our Blackberries, without having those extra (approximately 5,000) contacts go back into Outlook. Is there an easy way to categorize/separate Outlook and ACT? Any ideas or workarounds?

flashman181 wrote:
I am trying to sync my Outlook 2007 with my palm Treo Pro but keep getting the same error - server could not be reached Error code
80072ee2. This is probably a basic question but the server you enter into the Microsoft Exchange settings in active sync is the mail server you have in Outlook 2007? eg mail.internode.on.net. I don't need to do anything to outlook 2007 to "activate" Microsoft Exchange.
I'm looking at the Internode setup guides and it looks as though you have a POP server. In that case, if you want to sync directly to the server, you would want to set it up for POP/SMTP rather than for Microsoft Exchange Server. Does that help?
If you do not want to sync over the air and instead want to sync only by USB/Bluetooth to your PC, I think that works quite differently. I don't have any experience with that.
(Edit: Changed link style so it was more obvious.)
Message Edited by Jeffro on 05-27-2009 07:05 PM

Microsoft Exchange Server on Mac OS X Server

I am running Mac OS X Leopard Server on my Mac Pro with multiple clients, all using Mac OS X Leopard. Each client also has Microsoft Office 2008 for Mac installed with Entourage. Is it possible to install Microsoft Exchange Server on the Mac Pro and use it to set up calendaring for all of my Mac clients through Entourage?

Hi Benjamin,
Apologies for Jeff's rather useless answer.
You can absolutely install Microsoft Exchange on a Mac Pro server to accompany OS X Server.
Head over to VMware, Parallels or Oracle and grab a virtualisation hypervisor. I personally recommend VMware ESXi.
Setup a Virtual Machine running a copy of Microsoft Windows Server 2012 and Microsoft Exchange Server 2013. (More information here http://www.microsoft.com/en-us/server-cloud/products/windows-server-2012-r2/buy.aspx#fbid=f4pyYTvvgji and here http://office.microsoft.com/en-us/exchange/microsoft-exchange-server-2013-business-email-email-server-try-now-FX103765014.aspx)
If you would rather not involve yourself with all the fuss involved with maintaining Microsoft Exchange, head over to Microsoft Office's website and Subscribe to Office 365 for Business. If you would rather not work with Microsoft at all, head over to Google
and setup Google Apps.
Thanks,
Will

Receivemail setup for Exchange server

Hi all,
I have been trying to setup my process to listen to an Exchange server without any luck. When I test the connection I get the following error:
Test Clicked
Parameters:
filterSubject:
filterFrom: null
folder: null
deleteAfterProcessing: false
attachmentMimeFilterList: null
useConfigurationOptions: false
receiveHost: mail.dafolo.dk
receivePort: 143
receiveUsername: username
receivePassword: myPassword
receiveProtocol: imap
Type: class java.lang.String
receiveTransportSecurity: None
testData:
About to invoke...
java.io.InvalidClassException: javax.mail.MessagingException; local class incompatible: stream classdesc serialVersionUID = -6388198985190878204, local class serialVersionUID = -7569192289819959253
And in the server.log I get this as the cause:
Caused by: javax.mail.MessagingException: Connection timed out: connect;
nested exception is:
java.net.ConnectException: Connection timed out: connect
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:335)
at javax.mail.Service.connect(Service.java:233)
at javax.mail.Service.connect(Service.java:134)
at com.adobe.idp.dsc.email.MailReader.retrieveMessages(MailReader.java:87)
at com.adobe.idp.dsc.email.EmailServiceImpl.receive(EmailServiceImpl.java:240)
I believe I have set up the service correctly to the Exchange server - but I am not so experienced with Exchange so I don't really know how to connect to it correctly.
Thanks in advance
Sincerely
Kim

PS This, from the Javamail FAQ, may also help...
Q: I'm having trouble logging into my Microsoft Exchange server, even though I'm sure I'm using the correct username and password, what could I be doing wrong?
A: When logging in to Exchange you need to use a username that's more than your simple login name. For example, if your email address is "[email protected]", your Windows NT login name is "juser", your NT domain name is "dom", and your Exchange mailbox name is "Joe User", then you would need to use a username of "dom\juser\J.User" when logging in using JavaMail.
Howard
http://www.avoka.com

Sending Reports Through Microsoft Exchange Server

Hi,
We are working in oracle applications 11i on solaris. In Oracle HRMS we have a customized report that generates pay slips for employees in PDF format.
Please note that currently we are not implementing the Oracle Self Service feature as our organization hierarchy is not built in the system.
So, We are studying the possibility of sending these reports by email to the staff through Microsoft Exchange Server.
Can someone guide me where to start and what do I need to accomplish this please....
Thank you..

Hi;
What is your EBS and OS?
If you are usign concurrent manager for getting report please check below:
How to Configure Concurrent Request Output Option to be Notified by Email . [ID 456925.1]
Also check workflow notes:
Control - Workflow: Setup Doc ID: 113664.1
Oracle Workflow Best Practices Release 12 and Release 11i [ID 453137.1]
OWF Diagnostics, Solutions and Information Doc ID:332152.1
11i/R12 - A guide for troubleshoting Workflow Notification Emails - Inbound and Outbound Doc ID:831982.1
Hope it helps
Regard
Helios

Microsoft Exchange Server Active Sync issue

When I purchased my Droid Incredible I set up my account for my work email. My job uses Microsoft exchange server so I had no issues getting setup and started.
A week later my email stopped syncing. I deleted the account and set it up again. That temporarily fixes the problem. Another week passes and I have the same problem. I reset my phone and set up the my email account again. No issues until one week later when it does it again.
Unless I can find a solution to this problem I think this phone will have to be returned. Don't get me wrong, this phone is great but email is the reason I purchased this phone. There are 52 weeks in a year. I can't see myself resting my email account every week.
Any help would be appreciated!
Thx
TainoE

I had the same problem when I first purchased the phone back in May. I had about 60,000.00 emails from the past 5 years in my main server at work that I had not deleted. My IT guy told me that I had to delete my old emails and that the INC works from the main server and I had way over the amount that I should have. I work for a very busy RE firm in NYC and we get about 150 emails a day, which ads up fast. Once I dld as he suggested the phone has not had one problem w/ outlook or syncing again. The Iphone works in the exact same way. BB's operate from their own server so are not as effected by this as much. The phone works great with outlook, and actually quicker and better than my BB. Good luck!!

How to configure email through microsoft exchange server

Curve 8520 with vodafone

Instructions
1 Click the “Full Menu” button located to the immediate left of the trackball.
2 Click the “Settings” icon in the Full Menu.
3 Click the “Setup Wizard” icon on the Settings page.
4 Click the “Email Setup” link in the Setup Wizard.
5 Select the first radio button labeled “I want to create or add an email address.”
6 Click the “Next” button twice.
7 Type the email address for the account on the Microsoft Exchange Server in the first input box.
8 Type the email account password provided by the email administrator.
9 Click the “Next” link. The device will attempt to access the email account on the Exchange Server and download items. If connection is successful, the email account has been successfully added to the Blackberry.
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

I have a BlackBerry and Microsoft Exchange Server. How will I sync with my new iPad?

I have a BlackBerry that is supported by a Microsoft Exchange Server so I can sync my BlackBerry and my laptop which is a PC. How do I sync my Outlook info with my new iPad2 so all of my devices are connected? Thank you.

The setup , as was mentioned, is basically the same as a Wimndows Mobile device. You need mail server name, your domain login and credentials You will also need to check you wi-fi connection and be sure you can get rhough whatever enterprise proxy servers you might have. If you have 3g I would use that and not mess around with a proxied network, if that is an issue for you.
One additional caveat....adding another mobile device significantly increases the complexity of your mail delivery system. There are articles on the Microsoft kbase that talk about Outlook calendaring best practices. Watch for calendar consistency issues. You might consider running Outlook in online rather than cached mode, or at the minimum deleting and rebuilding your cache file.

My new Airport Extreme will not allow access to a Microsoft Exchange server

I just installed a new Airport Extreme at home and now I cannot access my work e-mail which is on a Microsoft Exchange Server. If I go back to my old wi-fi Access Point my work e-mail comes in and out with no problems, but when I hook the Airport Extreme it keep saying the connection is bad and to check the e-mail username and password.

If you setup the AE wrongly, as a router when you already have a router, then you must bridge the AE. Apple nowadays reckon they should be top dog and force the AE to router mode.. unfortunately this is wrong on at least 50% of the setups and their support says double NAT doesn't matter.. well it does matter.
You can do a simple test.. traceroute 8.8.8.8 from terminal or network utility.
If you find two separate private IP addresses the AE is setup wrongly and it must go to bridge mode.
Eg.. here is mine.. you will note there is hop 1, the main router.. 192.168.2.254 and the next hop is internet IP.
What you want to avoid is 10.0.1.1 and then 192.168.1.1 or any other combo of private IP addresses.
If the AE is setup correctly and there is only a single private IP in the traceroute then you have a different issue.
The AE is blocking the ports required for you to access your mail.
You will need to setup manual port forwarding to get this working. There is no firmware fix as this issue is in every firmware for the AC version AFAIK, but certainly if you are trying on previous firmware check for upgrade.
Port forwarding check what ports are required..
https://support.microsoft.com/kb/176466/EN-US
And folllow the instructions to open them.
https://discussions.apple.com/docs/DOC-3415

Emails for Current Day are not sync with Microsoft Exchange server

I have bought a Z1 and configured my microsoft exchange server email on it. All is working well. However it is only showing emails till yesterday. I have tried all sync settings including automatic, all, one day and all others but still it is not showing emails for current day. I have also tried all sort options but still no improvement.
The same setting are working perfectly fine on my Samsung Galaxy Note 2. What is the issue and how to fix it? Please make sure i have purchased a new phone and would use the stock email app and no third party email app.
Already there is a downgrade in Z1 stock email app. It is not supporting formatted signatures and formatted outgoing emails. Which is now very common on all phones of its price and class.
What is Sony doing on its phones? i do not understand.
Please let me know how to fix my issue of most recent emails sync.

http://office.microsoft.com/en-us/support/set-up-email-on-an-android-phone-or-tablet-HA102823196.asp...
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Can I get more than one account on iphone microsoft exchange server

Hi all,
I was trying to get more than one account on iphone microsoft exchange server for mail, but it seems to only accept one. Is this true with everyone else out there. I guess I am one of the few people with more than one email account that uses microsoft exchange. I would love to have the convience of accessing them through iphone mail but it seems that I will be forced to use safari for the other two by typing owa... in the url.
any workaround to the one email account per iphone policy??

Yu can only have one Exchange Server account per device. This is true to iPhone and any Windows mobile device in the market. The work around is to set your other accounts that reside on an Exchange server using IMAP or POP settings as you used to do before the Version 2 update allowed you to sync directly to the Exchange Server. This methode will allow you to add as many accounts as you want or have.

Setup microsoft exchange server

Similar Messages

Maybe you are looking for