Setup partner for notification process
hello All
As i am new to QM could anyone please let me know how to setup a partner for quality notification.
For Eg: John Smith for Y1 notification as PS(position).
Complete step by step procedure would be an advantage.
BR,
Sunny
Hi Sunny,
[I hope this link will help you|http://help.sap.com/saphelp_40b/helpdata/fr/38/e72c7dd435d1118b3f0060b03ca329/frameset.htm]
Regards,
Shyamal
Similar Messages
-
Partner function for notification processing in SPRO.
Hi Gurus,
I have to know that what is the use of settings for Partner function for notification processing in SPRO(implementing dptmnt,person responsible,function for paging,Task processor,partner function approver).what is the function for these?
2'nd in while creating/changing the notification in the notification screen in standard tool bar there are two Icons one for partners(ctrl+F1) and another for determine partner(F7).Pls explain what is use of this icon determine partner.???
Pls explain in details....hi
1.Refer the below threads,links
[Partner determination procedure and partner function;
[http://help.sap.com/saphelp_46c/helpdata/en/42/51b39b4a1211d182b80000e829fbfe/content.htm]
2.Partner are determined from master datas like equipment,functional location during notiifcations,order creation.
you can have defualt and mandatory partners
Regards
Seenu -
How to create a new business partner for notification with function module?
Hello,
I got a problem when I want to create a new Notification with its businiss partner (BAPI_ALM_NOTIF_CREATE). I can't find the proper way to create the new business partner. Anyone offer some help?
Thanks a lot!
Morganwhen I look at the function you can transfer the partner in NOTIFPARTNR table.
You must already have defined the appropiate partnerroll in customizing for you're businesspartner
or do you have another problem with this function ? -
Error in Setup Tables for QM Inspection Lots
Hi,
I have an issue when I attempt to fill the setup tables for QM that I receive the following error for the Inspection Lots (QV) only. When I fill the setup tables for Notifications and Inspection Results, then these are OK and use the same standard function module 'qmex_inspection_lot_import_ini'.
"Internal error in program SAPLQMEX, function module / subroutine qmex_inspection_lot_import_ini, code 1".
Has anyone any ideas of the cause or have you experienced this before?
Thanks,
ScottHi,
The most likely reason that leads to the above error message in your
system is an inconsistency of the inspection lots.
To get the inconsistent inspection lot,please check your system in the
following way:
- transaction OLIQBW for running Setup table
- switch on debugging mode
- set break point in the function QMEX_INSPECTION_LOT_IMPORT_INI
on the line:
ELSE.
MESSAGE e011(qmex) WITH sy-repid
'qmex_inspection_lot_import_ini'
'1'.
> then excecute F8 to go to this break point.
- double klick on ' l_qals-prueflos'
on line 77 in the same function QMEX_INSPECTION_LOT_IMPORT_INI:
READ TABLE qave_tab INTO l_qave
WITH KEY prueflos = l_qals-prueflos < here !
BINARY SEARCH.
Please check following note:
305244 Missing operations for the inspection lot
89541 Inspection lot exists w/o status object: EM BS001
536769 Inspection lots without status object
Thanks,
Venkat -
Idoc setup::Partner profile for Logical system
HI All,
I am using Idocs to transmit my invoice details from ECC to PI, but every time I do this for a new customer I have to setup a partner profile for the customer whose invoice is to be sent. I setup the partner profile using WE20, I setup the partner profile for partner type KU(Customer) in the we20,
Is there any way we can setup partner profile for LS(Logical system) in we20 & I don't have to setup partner profile for each & every customer for which Idoc is to be generated.
Please provide some useful information/help to handle this business scenario.
Regards,
Saurav SinghHi Saurabh,
Please refer SAP Note 1103146 and check.
Please also refer the below link:-
http://www.sapgeek.net/2011/07/sap-idoc-tutorial-maintain-partner-profile/
Thanks & regards,
Rahul Verulkar -
How to setup gmail push notification for my iphone 5?
I'm using gmail. Prompt respond for mails is very urgent for me.
How to setup gmail push notification for my iphone 5?I switched from a BB to an iPhone a few days ago and I knew I was going to miss the QWERTY keyboard but then I also discovered that my GMail doesn't 'push' to my iPhone. I was used to 'push' for all mail accounts on the BB. I also missed being able to personalize text, email, and phone tones for individuals.
I tried the Gmail app for iOS and it does deliver Gmail to the iPhone app quickly but the text is tiny and when it is a web page it's almost impossible to read.
So, I have worked out a kludge to get around these problems.
I added my exisiting Gmail account to the iPhone.
Hotmail does push to iOS 7 so I created a Outlook account (could be hotmail or Live) using the web browser.
I added the hotmail account to the iPhone. I basically use this to give fast notification of important emails on my iPhone.
On my macbook email client I created a rule that 'redirects' incoming mail to the hotmail account. The 'Redirect' is important since the email will show up in the hotmail account on the iPhone as coming from the original sender and you can then respond to the original sender from the iPhone, though the sender will see it as coming from the hotmail account.
The other downside is that you will get a second copy of the email in the gmail inbox on the iPhone, probably 15 minutes later.
If you don't want all of the mail being redirected you can create a 'redirect' group in the Address book and then adjust the rule in Apple mail to only redirect the mail to the hotmail account if the sender is in the redirect group. You can add and delete contacts from this group depending upon which ones you consider to be important. You will still get two copies of the email on the iPhone, one in the hotmail inbox and one in the gmail inbox.
You can prevent this from happening temporarily by turning off, but not deleting, the gmail account on the iPhone. You could then edit the emails on the Apple email client before turning the gmail back on in the iPhone.
And finally if you use the VIP feature in email on the iPhone you can create a list of VIP contacts and then assign a different notification sound for the VIP's. So in effect important contacts mail will be redirect to the iPhone for quick notification and very, very important contacts will have a different notification sound.
I'm basically using the Hotmail account as a notification tool and basically delete all the emails in it since the original copy will be in the gmail account.
And best of all it's all free, except for the bandwidth. -
What is the best way for email processing setup on CRM 2013 (on- premises) Set up?
We need to notify customers via CRM 2013 for some activities.
I searched regarding email processing set up, and i found two options:
1. via outlook
2. Via Exchange Server.
Tried through email router (exchange server), but it requires exchange online or SMTP for outgoing profile.
I do have exchange on premise setup, I am not sure about SMTP option.
My queries are:
> Can we configure Exchange server to work as Exchange Online?
> what other option, I can try for email Processing?
looking for your suggestions...
Thanks in advance!If you have Exchange onPremise, then you should be able to use the email router or server side sync in combination with CRM workflows (to generate the email). This is a fairly common scenario. You do not need Exchange Online.
http://technet.microsoft.com/en-us/library/dn531109(v=crm.6).aspx
http://technet.microsoft.com/en-us/library/dn531050(v=crm.6).aspx
http://www.microsoft.com/en-us/download/details.aspx?id=40342
Regards, Donna -
PM - Collective in process again for Notification
hi,
i need to in process again(recomplete) for notification. but i have a many notification and is that possible to collective in process again for all of them?Its not possible to do "Put in Process again" for the closed notifications in mass.
You have to try LSMW or SAP GUI script for that. -
DSC - Event triggering for Single Process Shared Variables
Hello,
I understand how to set up a Value Change Notification for Network Published Shared Variables so that an event will trigger when that particular Shared Variable changes. However, I can't figure out how to do the same for Single Process Shared Variables. Is this even possible? Can someone shine a light on this, please?
Thanks in advance.
- James Pham
Solved!
Go to Solution.VRspace4,
Hello! It is not possible to enable alarming for Single Process Shared Variables. A workaround to setup a Value Change Notification would be to create a network shared variable that reads from your Single Process Variable, but at that point in time it might be worth just replacing your variable with a networked shared variable.
Ben Sisney
FlexRIO V&V Engineer
National Instruments -
Extractor for PM process orders
Hi Experts,
We are looking for a PM extractor for process orders, this is to get component information (material details), we found 2LIS_04_P_MATNR but it's limited to production orders only, also tried filling setup tables for this extractors but not fetching process orders at all.
http://help.sap.com/saphelp_nw70/helpdata/en/88/7fc73c0c52085be10000000a114084/frameset.htmIs there any clues?
-
Job SM:SYNCHRONIZE USER DATA FOR NOTIFICATION canceled
Dear SAP Guru,
The BG job SM:SYNCHRONIZE USER DATA FOR NOTIFICATION is canceled every day and it´s
generating shortdump. Our system is SAP EHP1 for SAP Solution manager.
SAP ABA and SAP BASIS components are release 701 level 3.
ST is release 400 level 19
ST-PI is release 2008_1_700 level 1
ST-A/PI is release 01L_CRM570
Pls look on this shortdump.
Runtime Errors RAISE_EXCEPTION*
Date and Time 22.03.2010 06:50:11
|Short text |
| Exception condition "CUSTOMIZING_NOT_FOUND" raised. |
|What happened? |
| The current ABAP/4 program encountered an unexpected |
| situation. |
|What can you do? |
| Note down which actions and inputs caused the error. |
| |
| |
| To process the problem further, contact you SAP system |
| administrator. |
| |
| Using Transaction ST22 for ABAP Dump Analysis, you can look |
| at and manage termination messages, and you can also |
| keep them for a long time. |
|Error analysis |
| A RAISE statement in the program "SAPLDSWP_UTILITY" raised the exception |
| condition "CUSTOMIZING_NOT_FOUND". |
| Since the exception was not intercepted by a superior |
| program, processing was terminated. |
| |
| Short description of exception condition: |
| |
| |
| For detailed documentation of the exception condition, use |
| Transaction SE37 (Function Library). You can take the called |
| function module from the display of active calls. |
| - |
|How to correct the error |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "RAISE_EXCEPTION" " " |
| "SAPLDSWP_UTILITY" or "LDSWP_UTILITYU19" |
| "DSWP_GET_GLOBAL_CUSTOMIZING" |
| |
| or |
| |
| "SAPLDSWP_UTILITY" "CUSTOMIZING_NOT_FOUND" |
| |
| or |
| |
| "RDSWP_NM_SYNC_USER_DATA " "CUSTOMIZING_NOT_FOUND" |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
*|
|System environment |
| SAP-Release 701 |
| |
| Application server... "crsgrant" |
| Network address...... "10.128.32.175" |
| Operating system..... "Windows NT" |
| Release.............. "5.2" |
| Hardware type........ "2x Intel 801686" |
| Character length.... 8 Bits |
| Pointer length....... 32 Bits |
| Work process number.. 13 |
| Shortdump setting.... "full" |
| |
| Database server... "CRSGRANT" |
| Database type..... "ORACLE" |
| Database name..... "SM1" |
| Database user ID.. "SAPSM1" |
| |
| Terminal.......... " " |
| |
| Char.set.... "Czech_Czech.28592" |
| |
| SAP kernel....... 701 |
| created (date)... "Apr 12 2009 22:43:15" |
| create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00" |
| Database version. "OCI_10201_SHARE (10.2.0.4.0) " |
| |
| Patch level. 39 |
| Patch text.. " " |
| |
| Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.." |
| SAP database version. 701 |
| Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows |
| NT 6.0" |
| |
| Memory consumption |
| Roll.... 8112 |
| EM...... 4181184 |
| Heap.... 0 |
| Page.... 24576 |
| MM Used. 873664 |
| MM Free. 170296 |
|User and Transaction |
| |
| Client.............. 001 |
| User................ "SOLMAN" |
| Language key........ "E" |
| Transaction......... " " |
| Transactions ID..... "C27635DF574FF121B0470050569757E9" |
| |
| Program............. "SAPLDSWP_UTILITY" |
| Screen.............. "SAPMSSY0 1000" |
| Screen line......... 6 |
|Information on where terminated |
| Termination occurred in the ABAP program "SAPLDSWP_UTILITY" - in |
| "DSWP_GET_GLOBAL_CUSTOMIZING". |
| The main program was "RDSWP_NM_SYNC_USER_DATA ". |
| |
| In the source code you have the termination point in line 22 |
| of the (Include) program "LDSWP_UTILITYU19". |
| The program "SAPLDSWP_UTILITY" was started as a background job. |
| Job Name....... "SM:SYNCHRONIZE USER DATA FOR NOT" |
| Job Initiator.. "SOLMAN" |
| Job Number..... 00104000 |
Have you some solution or advice?
Best Regards
JakubPlease could you check the following ?
- Please ensure that the latest version of note 1172948 has been implemented
- Please follow the recommendation in note 1314587.
- Check table 'DSWPGLOBALCUSTOM' and ensure that the entry 'DTMLOG' is available. Create the entry if missing.
These procedures will solve this issue. -
Any ideas on this plan for a process chain?
Hi,
I have 6 ODSes. I load these on a daily basis with 6 different flat files. ODS1, ODS2 and ODS3 needs to be loaded first before ODS4, ODS5, ODS6.
Once all six ODSes are loaded, they are then aggregated based on some two key fields to and loaded into a cube. Npw I want to automate the process.
Can you please check if my plan for the process chain is right:
1. Start Process:
direct Scheduling
Change Selections:
Start date & Time
Period Jobs: check
Periodic Values: Daily
Restrictions: Always execute job
2. Indexes:(this flows into the first 3 ODSes)
Delete indexes
3. Load Data:
Load Data ODS1
Load Data ODS2
Load Data ODS3
4. Activate ODS1
5. Activate ODS2
6. Activate ODS3
(? What do I setup here so that the following will be loaded only if ODS1, ODS2 and ODS3 are successful)
7.Load Data
Load Data ODS4
Load Data ODS5
Load Data ODS6
8.Delete Indexes
9. Load Data
Load data from ODS1, ODS2, ODS3, ODS4, ODS5, ODS6 to the CUBE
10.Activate Cube (?Needs to activate cube? Is there a process type like that of activate ODS)
11. Create Index (Hm, will the Delete and create indexes in this plan take apply to both ODS and Cube)
Thanks, I will lovr to get hint from you. How do I factor in PSA? i.e. To always go to PSA then to ODS and Cube?Hi,
1.Start the process.(as per your requirement)
2. Load the data to ODS in parallel (ODS1 , ODS2 & ODS 3)
3. Activate the three ODS , with separate ODS activation process type.
4.Put an AND condition
5. load data to ODS4 ,5 and 6
6. Activate ods4 ,5, & 6.
7. delete index for cube
8. load different data from ods to cube
9. create index.
start
load ODS1 -- Load oDS2 -- Load ods 3
Activate ODS1 - Activate oDS2 - Activate ODS3
AND (process)
Load oDS4 load ods5 load ODS 6
Activate oDS4 Activate ODS5 Activate ODS 6
AND
Delete the index
Load data from different ODS to cube
Create Index
there is no concept of activating the cube .. it is only applicable to ods.
Regards,
Siva. -
My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.
Hello, BAHannebaum.
The article below should resolve any device not being recognized in iTunes issue that you are experiencing. The most common issues are the Apple Mobile Device Support driver or iTunes is outdated. Start with the first step and test the results after each step processed.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
How to configure dynamic email address for notification
All,
I have a problem in assigning dynamic email address for notification activity in a bpel process, I want to assign a user from a user-properties file. How do I achieve this. I tried using the users in System-jazn-data.xml file, but if i add a email attribute to the existing users it doesn't show up. I am sure there should be an easier way of using identity service and adding attributes to the jazn realm user, I might be missing something.
I cannot have it as part of the payload the only way is to use identity service.
Thanks,
ChitraHi James,
Thanks for the reply. Its solved now. For anybody if interested you can set the dynamic email address either i) having it as part of payload - In this case use the xpath to query the payload varaible ii) use identity service - follow the following steps
1.Create a user in Application enterprise manager/also you can use a existing account, if u are creating a new one assign the correct role
2. In either case edit the user-properties.xml(bpel/system/services/config) file for the corresponding user and add an attribute called email
3. Bounce the server for this changes to take effect
4. In the notification properties in the to address use ids:getUserProperty and pass the attribute name -
Function module creation for IDOC processing...
hi Experts,
i want to create a function module for idoc processing..
message type: zashpmnt
idoc type : shpmnt05
plz tell me which standard FM is used... and tell me what changes i want to do in it....
Tnx in Advance..Hello,
If you are trying to process an Outbound IDoc for the SHIPMNT05 IDoc Type with an Extension, you can use the IDOC_OUTPUT_SHPMNT Function Module which is assigned to SHPM Process Code.
In Addition, since you have an IDoc Extension, you are required to populate the Custom Segment / Fields. For this, there is a Customer Function / Exit called EXIT_SAPLV56K_002 which you can use it for adding your Custom Segments to the IDoc ZSHPMNT05.
If you are writing code in this exit, make sure to create a Project in CMOD.
Also, ensure that you've made the assignment in WE82 with the Message Type , IDoc Type & the Extension.
For Inbound, if you would like to Create a Custom Function Module, you can follow the Naming Convention Z_IDOC_INPUT_SHPMNT for which you are required follow the below Steps.
1. Register the FM as Inbound FM in BD51 T-Code.
2. Assign the FM to IDoc Type & Extension in WE57.
3. You'll need to Create a Custom Process Code in WE42 in which you are required to make add your FM.
4. Maintain Partner Profiles in WE20.
5. Have the Process Code Migrated to the Testing Environment as creation of Custom Process Code is a Customizing Activity and it requires a Customizing Request to be created / Migrated.
6. Define the Parameters as defined in the Standard Inbound Function Modules such as IDOC_INPUT_ORDERS , IDOC_INPUT_DELVRY etc.
Thanks and Regards,
Venkat Phani Prasad K
Maybe you are looking for
-
Safari will not open despite restart and reinstallation of OS.
When I open safari, I cant access any menus (I just see the color wheel when I hover over any menus). On activity monitor, Safari uses increasingly larger amounts of memory. I have to force quit to get out of the application. Ive restarted numerou
-
Parsing xml from a socket stream
Hi, I'm working on a client/server program, and I have the following problem. I'd like the client to send an xml-string to the server, and then the server to parse it (using SAX). The problem is, I cannot get the server to work. I thought the followi
-
Hi, I have a servlet, a session bean, and an entity bean. A servlet doesn't have any transaction attribute, a session bean has Required, and an entity bean has Required. I have the code like the following: Servlet: EJBDelegate ed = new EJBDelegate();
-
Hi there, I have a problem that I urgently need fixed. I have an applet which runs fine on my local machine i.e. using localhost. But when I connect to the network and try to run it off another machine the screen is grey. The bottom of the screen say
-
Permissions within MDT Deployment Workbench
We are using ConfigMgr with a MDT Integrated task sequence. We recently had an issue where a developer made changes to the production role, instead of the development role causing all builds in production to fail. Short of telling devs 'dont do that'