Setup problem tv@anywhere-master

HAVE RE-LOADED TV@ANYWHERE, RADIO WORKS FINE CANNOT SET UP FOR TV, CANNOT SET CABLE
AND CANNOT SET US.  ALWAYS GOES BACK TO COMPOSITE, ANTENNA AND GOES BACK TO AFGHANISTAN
I CAN SET THE NTSC BUT THAT IS ALL THAT STAYS IN THE SETUP. AM I MISSING A DRIVER
TWO MONTHS AGO IT WORKED FINE HAD TO RELOAD EVERYTHING, AM USING WIN98SE NEVER COULD GET THE REMOTE
TO WORK BUT DON'T USE IT ANYWAY, I CAN I GET IT TO WORK IN USA/CABLE/NTSC/TV

please don't type in CAPS as that is bad netiquette - it is considered SHOUTING
have you read through the sticky, as this has been covered several times before

Similar Messages

  • TV@anywhere master huge problem

    I have the TV@anywhere master and when i am changing the channel ( after a few times) the comp friezes

    Just to make sure I understand. It is your computer that freezes, not the TV tuner program. And you have the problem in at least one TV tuner program other than MSIPVS. PowerVCR is also freezing. Again it is not your computer that is freezing but the TV tuner programs.
    You did not answer the question: did you install the CD software or did you install the software from the MSI site?
    If you did install the software from the MSI site and the tuner programs are freezing, check if the TV tuner drivers (MSI 8606 Video/Audio Capture) are sharing an IRQ with another major component (example video / audio card, ignore USB controllers). In Windows you can do this using the MSInfo32.exe program. If the IRQ of the tuner driver is shared, move the TV Tuner to another PCI slot.
    If you did not install the software from the MSI site, download the MS-8606 files and install them.

  • What MSI should do to fix MSI TV Anywhere Master !

    able Of Content for below email:  
    1) context
    2) essentials on how-to definitively fix MSI TV Anyhwere Master while  natively recovering your customers long-term trusting in MSI logo.
    - - - - - -DETAILS:
    1) My neighbors have recently bought 2 pieces MSI - TV Anywhere Master tuner cards by following my latest advices.
    They both are students engaged by few media tasks in our campus to provide internal training by video samples and news broadcasts in local areas.
    One of them told me his intention to even start some anti-MSI virtual campaigns through world-wide forums against your product as a reasoned revenge for huge effort with no results during lot of time-loossing trials to setup, stabilize and properly use your MSI proprietary software and drivers (MSIPVS-WinDVR) delivered by with this product's original package.
    Now they claim as many others found on alike forums, all  money back and tens hours stress compensations from proximate shopping center cause these MSI tuner cards not working as they thought while comparing MSI product with other's alike.  It seems that MSI duped its long-term customers.
    They tested on both licensed and updated Windows 98 SE and latest Windows XP Pro (latest service packs included) but received undesirable results that we will compact them as below to suggest you what and how to fix it.
    2) Best ways to fix it :
    I. redesign all its drivers to include that MSI "secret" proprietary strings-keys requested to keep full activated your TV Anywhere Master card (CX23881-19 chipset) anytime for any other tuner/capture application (other 3rd party software like ChrisTV Pro, DScaler, PowerVCR, Virtual VCR /freeware!!!)  
    Currently, all these better featured applications can setup and recognize most of your competitors alike cards (based on new 10-bit CX2388x chipset) but not yours MSI Anywhere !
    It is worst way to freeze by default your customers expectations and usage development!
    So, unlock your card by new drivers really compatible with Microsoft OSs so, nobody will complain anymore against MSI hurried & unfinished or less-featured products due to any software related issues!  
    Remind that you are one of greatest HARDWARE producer not SOFTWARE, so, better provide what you are to provide!   Let others much more trained for software purposes to do it and to compete among themselves while getting much more freely alternatives to promote your cards to an wider range of users with different skills and interests.  
    II. redesign MSIPVS-WinDVR's setup panel to recognize and include any codec previously installed in the system during its launching, like your competitors' above software already done it successfully !  Mostly focus on DivX for video and MP3 for sound and alike codecs which are mostly used and available today everywhere (>70%!) both licensed and freeware releases, comparing with those obsolete MPEG files!  There is no need to train yourself by own software cause you better ask people like Chris(TV Pro) to do it for you much better and cheaper!  Forgot about MPEG2 and MPEG4(yours!) cause are for nothing !  Your MPEG4 not works on others PCs while MPEG2 is no use for most customers due to large resources requirement with even lower performances than an very well-settled DivX, which needs ten times lower space!!
    Go DivX 5x and MP3 for any software based encoding purposes is the only target for your recording settings panel!
    Also for Win Producer /Win Coder which can not not administer DivX and MP3 correctly.  (ask VirtualDub to replace it cause it is working infinitely better!)
    III. channel settings and scanning must be also redesigned to get more stable and transparent to the user: add a new column with its channel frequency and a real working stable control to FINE tuning and SAVE.  
    Finally, BEST is to setup a dedicated text file to save and launch all configurations within.  Anytime when push APPLY or SAVE, to write something in that file and then to read from there instead of use usually unstable system registry dynamic records.  In the same way, customer who want to fix something or really save their settings to preserve your cards and applications for unexpected failures, development etc, will be able to adjust on his own risk some settings which were not correctly settled by the application etc.
    This is to provide much more reliability to this card usage and to compensate potential bugs in future releases.
    IV. Provide an interface like above (III) to the enduser who  mostly demands to reconfigure remote control unit which is now too poor and not include essential controls like start/stop recording etc.  All remote controls to be written in a text file at also enduser disposal to modify shortcuts in order to reallocate remote control buttons to another panel controls etc.
    V. MSI-Radio tuner must have channel name (retrieved from FM table settings) displayed under the frequency and much more selectivity and real correct scanner (not use that "less stations" control).  It could be very demanded a wider range scanning from 30 MHz up to 110 MHz for many other locations.
    Both for TV channels (see MSI-PVS to provide full tuning all frequencies including manually settings each channel!)
    If it is hard to do it for Windows 98 release, provide them for XP at least but inside a better structured website than now.  In the present there are still many confusings and no stable procedure (that provided on the original CD has lot of bugs and missings risking to freeze the system!) regarding from where to download updates (too many different addresses to discover inside MSI-support site).  MSI TV Anywhere Master must have its own unique sub-site with all updates downloads included in the same page, both for drivers and for applications!   Also is a must to include WDM MS-8606 drivers instead of current ones to not receive anymore that error "nVIDIA WDM universal Capture" not found.
    Please email me and my neighbor marcellino
    ([email protected]) when demands described above will get fixed !
    Thank you in advance and wishing MSI good lock for better results!
    Regards,
    TekSam & marcellino
    ([email protected])

    Exactly my thoughts.
    Probably they're even too affraid to give us some answers about how, what and where.
    I had a previous descussion about an MSI mb that wouldn't accept a 40GB Maxtor hd. My asus mb didn't have a problem with detecting it.
    Their reply was to flash to the latest bios version, which I already wrote that I did that in my e-mail to them.
    A friend of mine had the same MSI mb, guess what???   same problem. His Dell pc, no problem.
    Wrote back to MSI, waiting for 3 years now , never received an e-mail. (wrote a couple of reminders).
    I now bought this tv nowhere card and I have the same problem as many people have....     alot of sh*t ....   and not working. No refund, 0 support, users must help other users to solve certain issues, --->  10 clean versions of winXP and hours and hours of stress
    This will be the last MSI product that I will EVER buy.

  • Where is thet *.dll (TV Anywhere Master)

    I look... but didnt find any message about anyone having problem with Windows ME and driver for TV Anywhere Master.
    I cant stand that Im the only one who have problem with drivers on Win ME, simply reports that cant find tsbyds.dll or  tsbyd something.dll I cant remember right now.
    On Win XP with or without SP1 work just fine....

    I cant beleve that no one have problem with missing TSBYUV.DLL when they are instaling drivers on Win ME.
    Nevermind, thanks for the support.... I will find solution my self.

  • Tv anywhere master... till when?...

    Hello everybody and excuse my english... 
    I have a tv anywhere master card and i'm getting tire of it... (i think i'm going to get a tv tuner card based on ATI's new Theater 550 Pro processor either POWERCOLOR or another brand... NOT Msi...)
    the reason as you all can guess is the DRIVER/SOFTWARE problem... (even with these you can tell that the hardware is pretty good)
    for example this hissing sound the card makes when windows starts... the best we can do is to change the input source to aux instead of line in in order to get it muted when the OS is booting, ppl for me that is a solution if someone give the card for free, not for something i paid for...
    the issue is supposed to be related with the Crossbar Driver... well when you see the beta driver the AUDIO and VIDEO capture driver are new but the TV TUNER and the CROSSBAR driver are the same problematic drivers of almost 2 years ago... (this is supposed to be fixed in the beta drivers... well i still had the problem...)
    anyway i installed the beta drivers and had to install the old ones again because the image gets grainy and in general of lower quality...
    well this is what i wanted to share my thoughts with you guys
    good luck

    And you tried the new drivers here https://forum-en.msi.com/index.php?topic=77045.0

  • TV@anywhere Master locks up

    Just purchased a new TV@anywhere Master 8606. The thing just does not work. There are two problems that make this card completely useless in my system:
    1. MSIPVS constantly freezes. Sometimes it freezes the entire computer - even the mouse cursor won't move anymore. I have to hard reset the machine. This happens constantly. I've never had MSIPVS run for more than a minute or two.
    1. The MSIPVS application only finds half the channels. I have an external antenna and my reception is near perfect. All channels display perfectly on a TV using the same cable and arial point. I even tried another brand of TV card and all channels worked perfectly.
    For the channels that it does find, the image quality is poor.
    The machine I am using is a new P4 2.4 Ghz machine with hyperthreading CPU. Maybe MSI's software has trouble with these new CPUs?

    I use a TV@nywhere master on and AMD AthlonXP PC with minimal problems. I have heard of others with P4s have simular problems to yourself.
    The Drivers and MSIPVS do need to be fixed as there are definite problems especially if you try to use tuner with any other software. The Tuner on board the TV@nywhere master is very new and does not seamed to be suported correctly by any software I have tried. I must admit that I have minimal problems with MSIPVS but the tuner drivers are not satifactory. I can state that this card has exceptional quality on capture from good sources and a great display when TV is played via Svideo or Composite-in using either Dscaler or ChrisTV.
    I did have problems getting the MS-8606 Audio drivers to install initally but once I had manually installed them there were no more problems. Maybe worth checking that the drivers have been installed. In Device Manger you should see references to;
    MSI 8606 Audio Capture
    MSI 8605 Crossbar
    MSI 8606 Tuner
    MSI 8606 Video Capture
    if any of these are missing or you have a yellow exclaimation mark next to them, either re-install the drivers and/or try moving the card to another PCI slot but do not use the slot next to the AGP slot. Some machines are very fussy as to which PCI a TV card will work in.

  • TV Anywhere Master Installation instructions combined with WinProducer

    Installation of MSI TV Anywhere Master on Windows XP SP1, DX9 (Should work on other installations but tested on this.)
    First, before beginning go to http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_ten.php?UID=193 and download the new driver package.  You will need to run the executable and extract it to a folder before proceeding.
    UN-INSTALLATION
    Before proceeding you need to uninstall all of the software that came with the TV Anywhere Master.  Below are instructions on how to do this.
    WinProducer Un-installation
    Now, open Add/Remove Programs.  Locate InterVideo WinProducer and remove it, it will request you to reboot, go ahead. Allow it to remove all files include locked files that it requests to do at next reboot. REBOOT
    MSIPVS Un-installation
    Reopen Add/Remove Programs and locate MSIPVS and remove.  Allow it to remove all files include locked files that it requests to do at next reboot.  REBOOT
    MSI Radio Un-installation
    Reopen Add/Remove Programs and locate MSI Radio and remove it.  Allow it to remove all files include locked files that it requests to do at next reboot.  REBOOT
    TV Tuner Driver Un-Installation IMPORTANT!
    Reopen Add/Remove Programs and locate and remove TV Tuner Drivers.  These are the drivers for your TV Tuner even if they don’t say MSI!  REBOOT
    Now you are ready to proceed with the installation.
    INSTALLATION
    Installation of MSI TV Anywhere Master on WinXP
    TV Tuner Drivers
    Locate the folder you extracted the drivers downloaded from the link above and run “PVSSetup”.  Follow all onscreen instructions.  REBOOT
    WinProducer Installation
    WinProducer needs to be installed next because of a file incompatibility with MSIPVS.
    Insert the CD InterVideo WinProducer / WinCoder.  Follow the onscreen instructions to reinstall.  REBOOT
    MSIPVS and MSI Radio Installation
    Insert the CD Labeled InterVideo MSIPVS.
    In the AutoRun make sure you Select MSIPVS, NOT the drivers.  If you select the drivers you will have to start over by removing the software again.
    Follow the onscreen instructions and during the install when it encounters a locked file select “reboot”.  Once completed reboot the system.
    You should be all set now!  Have fun…..  If this doesn’t work on your system please let me know your config and what problems you are still having….
    Thanks,
    Larry (digitaldreams)

    Note: NTSC region, FFDSHOW set to accept raw video, output just about anything, de-interlace set to ffmpeg (seems better than 5-pass or TomsMoComp; any attempt to link in a DScaler .dll crashes the player) resize and sharpen (to your display res, set "No Aspect Ratio Correction), "Experimental" method (much less load than Lanczos, which is slightly better) 1.60 for both luma and chroma.
    1. Load MPC, click on File>Open Device>Select "Conexant 2388x Video Capture", click OK. If necessary, View>Capture to get control frame.
    2. Play>Filters>Conexant 2388x Video Capture>MSI 8606 Crossbar>drop Output Menu>select Video Decoder Out (this turns on the Apply button)>Tick Link Related Streams>Click Apply Button (and voila, sound)>Click OK to exit.
    2a. Play>Filters>MSI TV Audio>Set Channels and Language (seems to be a one-time only requirement).
    3. Play>Filters>MSI 8606 Tuner>(set country code, tuning mode, input & video standards if necessary) change channel once via filter keypad or up/down arrows (seems necessary to get pageUp/Down keys to be recognized).
    4.Play>Filters>Conexant 2388x Video Capture>Properties (make sure Video Standard under Video Decoder tab is correct)>Video Proc Amp>Set to personal preferences (I like Sharpness at max setting, you may find it 'grainy').
    5. Usually, the tuner output reverts to RGB16; FFDSHOW (for me, anyway) seems to need YUY2. Then crank the horizontal & vertical res to max, click on "Set".
    6. Close the Capture frame, adjust image window size, position to your liking (alt+enter toggles fullscreen - doubleclicking the image usually locks everything up).
    Simple eh? Worth it? Your decision. Not quite DScaler, but close.
    Channel selection by keyboard is only next/previous (and opposite that of MSIPVS). Channel jumps can only be done by the filter. (Right click on image if you are in full screen (and if you are simply watching TV, you can drag the filter window down and offscreen).
    And there are all sorts of weirdness - you never know what settings will "stick" from one time to the next. Haven't been successful in getting it to record, and after playing around with some other recording programs, I now have this echo (or even echo/echo) sound (I have to TURN OFF the line input to the sound card to get rid of it, yet the line input volume slider still has effect).
    It's a great time waster.  

  • I need to upgrade my 10.5.1 os on my G4/1.25 (I'm having some audio-midi setup problems), but it's a machine that is not connected to the internet.  Do I have any options?  Thanks!

    Friends,
    I'm having some audio-midi setup problems on my G4/1.25/10.5.1 machine.  I'm thinking that a routine OS upgrade might help.  However, this machine is not connected to the internet.  Are there any alternate methods for upgrading system software?  Thanks in advance!

    OK, what you should do is download the updates on another machine and burn them to a disc.  Start at this link http://support.apple.com/downloads/#leopard for downloads and find, among other things, the 10.5.8 combo updater that works on PPC machines, plus security, QuickTime and other updates.  Going from 10.5.1 to 10.5.8, there will probably be a bunch of things that you should install.  Being off the internet with the machine, you can't have Software Update sort it out, so something might get missed, unfortunately.
    My suggestion is this: if it looks like you might need a download, get it onto that disc.

  • Setup problem, windows xp, firefox upgrade to 4 and asked to reboot but did not progress. keeps asking to restart even if I try to remove

    setup problem, windows xp, firefox upgrade to 4 and asked to reboot but did not progress. keeps asking to restart even if I try to remove

    Hi marsano,
    Usually the only reason it will ask you to reboot is if there is a file that must be modified that the updater doesn't currently have access to. You should try running the Firefox program once as Administrator:
    * Right-click the icon and choose ''Run as Administrator''
    If that doesn't help then do a clean reinstall.
    # Download a fresh copy of Firefox from the [http://www.mozilla.org/firefox/fx/ Mozilla download page] and save the file to the desktop.
    # [[Uninstalling Firefox|Uninstall]] your current version of Firefox and remove the Firefox program folder before running the new installer.
    # Run installer
    Remember that you don't want to remove personal data when uninstalling. That way you'll still have your personal information.
    Hopefully this helps!

  • Problems in Vendor master record.

    Hi Sdn Experts...Could you help me?
    I have problems with vendor master record. I have vendors in duplicity....to solved this I aplly the solution by sap for make the consistency by Tax number. Now I cant insert the vendor with the same Tax Number...But appear other problem..I have a lot of vendor in duplicty befora i aplly the solution and i need to eliminate this vendors...
    I execute the Transaction XK05 ( Block Vendor ) and XK06 (Mark Deletion Flag), but doesnt work...because if i make any modification in a vendor master correct the system show up the message..
    ''Vendor master record with the same tax number already exists''
    There is other way to make the deletion the vendor record? How I solve this issue?  Pleaaase help meee!
    Take a look in the File
    [http://www.easy-share.com/1903543315/vendor_problem.doc]
    Thanks,

    hi
    u have to archive the vendors inOBR2 or the simple way is go to XK99 here give the list of the vendors and then change the description with * in mass
    so description of all the duplicate vendors will be * and then flag them for deletion so they cant be used again
    agin u can use them agin by changing the name by some other vendor so u can use the same vendor code for other vendor by just changing the  description
    regards
    KI

  • Problem loading material master (IS Mill) data from ECC to BI

    Hi Gurus,
    We have a problem loading Material master data from ECC to BI 7.0 SP 18.
    The scenario is :
    The ECC is with IS Mill... due to which the Material field MATNR is of length 40 instead of standard 18 characters.
    That is data element MATNR has 18 chars and its output length is 40 chars.
    When is table MARA browsed using SE16, the material with more than 18 chars.... shows only first 18 characters and are ended with !.
    OMSL setting shows length as 40.
    When the extractor checker runs 0MATERIAL_TEXT or 0MATERIAL_ATTR it gives correct output ..... which is more than 18 characters... not ended with !
    Till here no problem.
    On BI side, after replication of the datasource, i checked data element MATNR ... but it has length as 18 chars and output length as 18 chars.
    OMSL setting cannot be set more than 18.
    Infopackage has pulled data till PSA successfully. I checked the PSA data .... here to the material with more than 18 chars is ended with !.
    When the data is further pushed to 0MATERIAL infoobject, it throws following error for all materials irrespetive of its length (example below):
    0MATERIAL : Data record 768 ('SIT_PL_B01L_10_01!E '): Version 'SIT_PL_B01L_10_01! ' is not valid
    0MATERIAL : Data record 165 ('RLIRS52 E '): Version 'RLIRS52 ' is not valid
    Diagnosis
         Data record 768 & with the key 'SIT_PL_B01L_10_01!E &' is invalid in value 'SIT_PL_B01L_10_01! &' of the attribute/characteristic 0MATERIAL.
    System Response
         The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give  you more information on the error. This message refers to the same value, even though it does not state this explicitly.
    I did search for SAP note related to this... but could not find any.
    There is one SAP note (Note 960868) which mentions about this, but the correction was then shipped with BI SP 9.... we are running on SP 18.
    Requesting you all experts for help.
    Best Regards,
    Deepak

    Hi,
    follow bellow steps:
    1. you need to activate the Datasouce in BI side.
    Goto RSA1>  Datasource> Select Datasource> Double click> Check fileds and Activate.
    2. Replicate the Datasource into BI side.
    3. Check the RFC connections by useing SM59.
    Regards.

  • Simple VISA Setup Problem

    Hi all,
    I'm having issues working with VISA in LabVIEW. Previously, I've used Peek/Poke VIs (before they were VISA VIs) that allowed me to read and write directly to registers at a given Windows address. I have a new, custom PCI Express board that uses the same architecture that I've worked with previously only this time I'm trying to access the registers using VISA.
    As this is my first time using VISA, I'm having some setup problems. Yesterday I got to a state where logically things should work but I still end up getting an error when I try to run a simple VISA Open command (see attached screenshot).
    The initial problem I had was I was not able to acquire a VISA resource that opens a session to my PCIe board...it would simply not show up on the resource list. After reading around I discovered I needed to create a custom VISA driver for my board. Once I did that using the VISA Driver Wizard, the device showed up in my list (as seen in the screenshot). I wrote the simplest of all VIs where I simply open that VISA resource, however, the error seen in the screenshot is produced.
    I'm pretty sure this is a simple setup issue, but does anyone know what I'm doing wrong?
    Attachments:
    Screenshot1.JPG ‏145 KB

    Hi bonhomme,
    I see you're having some issues using VISA. It sounds like you're new to VISA, so I wanted to pass along some information that we have availble on this software. This link gives good general information about VISA, and the related links are extremely helpful in finding specific issues.
    Thank you for attaching your error. This is extremely helpful in debugging since we can actually see the numbers. There is another forumn that talks about these at this link and at this link. 
    Hope this helps you out!!
    Lea D.
    Applications Engineering
    National Instruments

  • QM: Inspection Setup in the Material Master

    Hi all!
    A quick novice user query: In SAP ERP Quality Management, I was creating an inspection lot for a material and it prompted me to first add an inspection type for it. I went to the Inspection Setup in the Material Master, entered the material, the plant, check activate inspection, selected an inspection type and hit execute. But it keeps giving me "No entries found". Any help?
    Thanks a bunch in advance!
    Regards,
    Bilal

    Your query does not provide complete info as to what type of inspection origin you're trying.
    Anyway as a thumb rule ensure that the setup in material master exists, i.e. the relevant inspection origin type. Ensure the tickbox for active exists. Also the corresponding data such as inspection plan / material characteristic etc. exists along with the required setup.
    Once the above is in place you can proceed with the QM flow. In addition to this I would also suggest do a search in QM forums to know more about how to maintain the data, what needs to exist etc. Also go thru' SAP help.

  • CDC setup problem

    {noformat}Dear all,{noformat}{noformat}Trying to troubleshoot a CDC setup problem in ODI:{noformat}{noformat}I got an error when trying to "Start Journal" from the CDC source model (in Designer).{noformat}{noformat}Here is what I've done:{noformat}{noformat}1. grant the following role to the CDC source schema (user):{noformat}{noformat}DBA, execute on DBMS_CDC_PUBLISH, connect, resource, select_on_change_sets, create session, select_catalog_role, execute_catalog_role, create sequence{noformat}{noformat}2. in the CDC source model "Journalizing" tab, specify JKM 9i logminer (CDC source is on 9i) and specify "Automatic Configuration"{noformat}{noformat}3. add a subscriber "SUNOPSIS" to the source model -> Changed Data Capture (Operator successfully run){noformat}{noformat}4. "add to CDC" from source model -> Changed Data Capture{noformat}{noformat}5. "Start Journal" from source model -> Changed Data Capture (Operator run failed with the following errors in the "create Journal" step){noformat}{noformat}
    30475 : 99999 : java.sql.BatchUpdateException: ORA-30475: feature not enabled:
    ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 298
    ORA-06512: at line 1
    30475 : 99999 : java.sql.SQLException: ORA-30475: feature not enabled:
    ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 298
    ORA-06512: at line 1
    java.sql.BatchUpdateException: ORA-30475: feature not enabled:
    ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 298
    ORA-06512: at line 1
    at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:367)
    at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:9119)
    at com.sunopsis.sql.SnpsQuery.executeBatch(SnpsQuery.java)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
    at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
    {noformat}{noformat}Any idea?{noformat}{noformat} {noformat}{noformat}William Lam
    {noformat}

    Hi Cezar,
    Thanks for following up. Below is from the description tab of the "Create Journal" steps:
    LOADING:
    select     FULL_TABLE_NAME     FULL_TABLE_NAME
    from     CDCSRC.SNP_TMP_TABLE_LIST     TMP
    where     TMP.FULL_TABLE_NAME = 'CDCSRC.DEPT'
    and     not exists      (
              select     'X'
              from     CDCSRC.SNP_CDC_OBJECTS     OBJ,
                   CDCSRC.SNP_CDC_SET_TABLE     TBL
              where     TBL.FULL_TABLE_NAME          = OBJ.FULL_TABLE_NAME
              and     TBL.FULL_TABLE_NAME          = TMP.FULL_TABLE_NAME
              and     TBL.CDC_SET_NAME          = 'CDCSRC.CDCSRC'
              and     OBJ.FULL_OBJECT_NAME     = 'CDCSRC.J$DEPT'
              and     OBJ.CDC_OBJECT_TYPE          = 'JRN_FULL_NAME'
    DEFAULT:
    BEGIN
         DBMS_LOGMNR_CDC_PUBLISH.CREATE_CHANGE_TABLE(
         owner          => 'CDCSRC',
         change_table_name     => 'J$DEPT',
         change_set_name     => 'SYNC_SET',
         source_schema     => 'CDCSRC',
         source_table     => 'DEPT',
         column_type_list     => 'DEPTNO NUMBER(2) ',
         capture_values     => 'new',
         rs_id          => 'n',
         row_id          => 'n',
         user_id          => 'n',
         timestamp          => 'y',
         object_id          => 'n',
         source_colmap     => 'n',
         target_colmap     => 'n',
         options_string     => ''
    END;
    The error message from the Execution Tab:
    30475 : 99999 : java.sql.BatchUpdateException: ORA-30475: feature not enabled:
    ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 298
    ORA-06512: at line 1
    30475 : 99999 : java.sql.SQLException: ORA-30475: feature not enabled:
    ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 298
    ORA-06512: at line 1
    java.sql.BatchUpdateException: ORA-30475: feature not enabled:
    ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 298
    ORA-06512: at line 1
    Once again, the setup details:
    - CDC source is on Oracle 9i
    - KM used is Oracle 9i LogMiner
    - enabled archivelog in Oracle 9i
    - installed logminer by running the 2 sqls as described in the earlier tread.
    I need to meet a tight deadline for POC completion and I desparate need some help here.
    Thanks and regards,
    William

  • No batch input problem with Vendor master Upload

    Hi All,
    I am getting a problem with Vendor Master upload conversion. We have'nt change the code and configuration but when i try to run the code today its giving an error for particular Account group. I run this code yesterday and its work fine with that particluar Account group. But i am getting an error when i run the code today. The error is as follows "No batch input data for screen SAPMF02K 0610".When i got through the code i have'nt find that screen number.
    Can anyone suggest how to resolve that problem.

    Double click on the session name in SM35 and click on the screens tab there you can find the screen number.
    process the same session in foreground mode and see if you are getting the same error.
    If so, the new screen number you got is due to some change in the settings some where, show the new screen to Your Functional guy and he can help you.
    There is one more chance where some data is missing in the flat file, just check it out.
    Reward points if usefull.
    Thanks ,
    Veeru.

Maybe you are looking for