Setup Problem with 8500a, computer does not sees printer, but printer sees router

When  updated my wireless router (AC 1200) my 8500a had to go to the "guest network".  The printer sees the router and prints the test pages fine, the computer does not see the printer and I can not print.  During the setup, when I enter the IP address off the printer, the computer does not find it.  What can I do? I am running windows 7 premium.

Hi 776,
I understand that you're trying to setup your printer.  Is the computer you're trying to connect to the printer on the same guest network as the printer?

Similar Messages

  • What if sync with new computer does not work. logical connection to old with WindowsXP, 32 bit version of iTunes. New is Windows7 with 64bit version

    What if sync with new computer does not work?
    logical connection to old with WindowsXP, 32 bit version of iTunes.
    New is Windows7 with 64bit version

    Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
    Do this:
    Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
    Music is one way only, from the computer to your device, unless you bought the songs in iTunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    About backups and what's saved: http://support.apple.com/kb/HT4946
    How to back up and restore:http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device
    If your iPod can't be recognized by Windows, try these tips: iOS: Device not recognized in iTunes for Windows

  • I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes

    I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes imei: 01******206
    <Personal Information Edited by Host>

    لدي جهاز ترقفت الشبكه ويعطي جاري البحث وتم تحديثه ولم يتم حل المشكلهة  والان الجهاز لايقبل التنشيط والايتونز لايتعرف عليه امل تنشيطه 013619004986206

  • I have a new hard drive and itunes and my computer (windows XP) no longer recognise my ipod. I also had the problem with the registry keys not being present but this has now been fixed. However i can no longer link my ipod up with itunes.

    When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.

    Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
    I've tried windows update but this doesn't do anything as '...the service is not running'.
    Any suggestions?

  • Problems with Tomcat Server : Does not respond (Sometimes) - Plz Need Help

    I have a web application running on Tomcat 4.1.31. (SUN/Solaris)
    Clients access through iPlanet Web Proxy (SUN/Solaris).
    Theres a class that build a generic form (it return html codes) then it's affected in the JSP page :
    MyClass class = new MyClass();
    <%= class.getHtmlCode() %>
    the size of the form is variable (100Ko to 1,5Mo)
    When i m using the proxy, sometimes the server does not respond when he do the affectation <%= class.getHtmlCode() %>.
    If i call the page without proxy it work.
    The problem seem not depending of the size of the form. Without proxy it always work. And with proxy sometimes the server does not work.
    Please need help

    Originally Posted by scum
    Hey All,
    Need some help with ZDM7 PXE preboot services.
    Currently running a netware 6.5 server in VLAN1
    PXE client sitting in VLAN2.
    DHCP Server is running on VLAN3
    IPHelper is running
    DTS.ini, PDHCP.ini and TFTP.ini are unmodified.
    I have had networks put an IPHelper in place and my client successfully picks up an IP address. The screen displays the "BOOT SERVER IP" correctly and the clients IP details are correct.
    I watch the top of the screen where the Timeout counts down and eventually gives this error.
    "Error: The server did not respond as requested in time
    ZENworks shutting down...
    Press any key to continue..."
    This happens on every machine i have tested. If i hold down the Ctrl+Alt keys, then the imaging menu appears, i can select maintenance and the client will pull down the initrd, etc.. fine.
    if i disable the IPHelper, move the client to the same VLAN as the server, then the whole process works perfectly.
    not sure where to go from here.
    help please ;)
    leon
    Hi Leon,
    If you are getting the ZENworks menu when holding down the Ctrl-Alt keys, PXE/PDHCP seems to be doing the right thing. Routing issues also don't seem the case as you can pull down the first PXE boot files....
    The server running PXE, I assume it also runs the TFTP and Imaging services?
    These services are also running a recent version of Zen 7 (IR3/IR4)? A little more info on these components and what server they are on would be good :)
    Cheers,
    Willem

  • How do fix problem with iPages - type does not enter - ?

    How do I fix this problem with Pages - type from keyboard does not enter ?  If I need to re-install, How do I do that?

    Hello DonAndNorma,
    You may need to uninstall, then reinstall the Pages application. Steps for doing so can be found in the article linked below.
    OS X Mavericks: Install, update, and uninstall apps
    http://support.apple.com/kb/PH14299
    Cheers,
    Allen

  • Problem with Codec - QT7 does not recognize it

    I'm trying to play a video with the basic version of QT 7.0.4 (didn't go to PRO yet) and the movie does not play.
    I installed the codec's and still doesn't work.
    The movie info was:
    DX50, 528 x 304, Millions
    MPEG Layer 3, Stereo, 48.000 kHz
    And I had in the folder HD/Library/Quicktime:
    DivX 6 Decoder.component
    DivX 6 Encoder.component
    AppleIntermediateCodec.component
    In another try the movie info was:
    XVID, 544 x 304, Millions
    MPEG Layer 3, Stereo, 44.100 kHz
    And I had in the folder HD/Library/Quicktime:
    XviD_Codec v0.5.1.component
    AppleIntermediateCodec.component
    I tried all combinations of codec's (including 3ivx) and did not work.
    Does the basic version accept 3rd Party codecs?
    Any ideas?
    Thanks,
    J.Ricardo

    Hello JC,
    The reason the movie will not play is because that's how Apple grabs you by the yang and twists. QT will not play AVI files until you purchase QT Pro, but it gets better. When you do purchase it, it will only work for the life of the lastest version of QT. As soon as a newer version comes out say QT 8, the QT Pro you now have for QT 7 will no longer work. That's why I'll never get QT Pro.
    JerBear :-})

  • I have a problem with Downloads, firefox does not recongise the .doc format despite me having word 2007 loaded only a problem since a new laptop, and windows 7 professional, any ideas?

    When Trying to download a word file I get this error message: " *.doc could not be opened, becasue the associated helper application does not exist change the association in your prefernces. " Have checked preferences, and IE opens up the file pointing to something wrong with firefox.

    I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

  • My iMac with Mavericks update does not recognize my brother printer and I cannot even add the printer info in the system preferences printer list.  What is WRONG?

    I had to buy a new printer when I got my Imac and I chose the Brother multifunction inkjet MFCJ470DW.  It worked fine when my Mavericks version was 10.9.1, but after the automatic update to 10.9.2 the computer no longer recognizes the brother, or says it isn't connected, and when I deleted it from printer preferences and attempted to re-enter it as default printer, I cannot even type anything into the list of printers when I press the + sign to add.  What am I doing wrong?  Can someone please tell me even how to add text into the printer preferences list? 

    I had some of the same issues your having, deleted the printer from Printer and Scanner in System Preference.
    What I ended up doing was connecting the printer with a USB cable like it was a new set up, down loaded the drivers from Apple, still did not seem to work, but did a coupel of restarts and the printer was found then I completed the set up.

  • Problem with JuniperSetupClientInstaller. Does not run, only save option

    Firefox is a optional application used in our organization. There about 2000 Firefox users. We have VPN portal running from web interface, which uses Juniper Client to connect intranet. Until Firefox version 6 it was working ok. Since Firefox 7, whenever we launch the portal, instead of running the add-on JuniperSetupClientInstaller.exe automatically, it asks to save file. I save it, run it and relaunch the Firefox and go to the portal. And I get the same "Save" prompt. The site requires Java and this plugin. Java is installed but I can not get this plugin work. It works fine with IE and it works in Firefox with "IE tab 2(3.5.9.1)" enabled for this site, which is pretty much the same IE running on the background

    Do you have the latest update? how accurate is your GPS?
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • HT4103 have a problem with shared file does not exist? used sudo but "no file in directory". i think the problem is from when i tried to move itunes files to an external drive to save space on laptop, cant remember what i actually did!

    followed support steps  (sudo) to recover itunes sync authorization "permission error" but did not work

    i tried both steps but did not help: "disk utility" first aid and iTunes: Missing folder or incorrect permissions may prevent authorization.

  • Computer does not recognize powershot a590 is

    When I plug the camera to my laptop with windows 8.1 with the usb cable it came with the computer does not recognize the device. When I hit device trouble shooter same thing. I can not run the software cd because my new laptop doesnt have a cd drive. I did go to the canon site and upload the software thinking that may solve the issue, but when I get to step two of the installation and I connect the camera per directions it again can not find the device.
    I can not seem to find a driver alone for a manual installation.
    Any help or thoughts greatly appreciated!!! 

    Hi sasbuckeye!
    Thanks for posting about this.
    The drivers needed are built into Windows, so no additional driver installation is required.  I would like to gather some additional information to help determine what is causing the issue.
    Is the camera still recognized at all by other computers?
    Is your laptop connection to AC power?
    Are there any devices connected to your laptop other than the camera?
    If this is a time sensitive-matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
    It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

  • My computer does not connect with my device.

    My computer does not recognize my device through the USB cable.  the Desktop Manager shows disconnected and cannot connect.  It says the device cannot be found.  Can someone please help?  I can connect through Bluetooth, but not all services work with Blue Tooth.
    TIA
    Solved!
    Go to Solution.

    Install the most recent version of Blackberry Desktop Software
    For now it is located at http://eu.blackberry.com/eng/services/desktop/req_4dot3.jsp
    The common reason for the situation when PC does not recognize the blackberry device is the mismatch between Blackberry Desktop Software version and Blackberry Handheld software (software installed on your blackberry) version.
    If you use an old version of Blackberry Desktop Software you may get the problems you describe in your post.
    To resolve this: Uninstall your current Blackberry Desktop Software from your PC
    download and install the most recent Blackberry Desktop Software.
    and try to connect your Blackberry to PC.
    It should work ok.

  • I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

    I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

    Thanks,
    Yes, I did that. They have uppgrades for the dongles, but just untill Mac Os 10.7. Their solution is to buy a new modem from them or getting one for free if I sign a contract for 24 months! So, i think from that side not very helpful.
    It is just that I do not want to buy a new modem, when it works in quite recent computers and after having spent money in the new Mac.
    But thank you for your reply!

Maybe you are looking for