Setup Problems with New AirPort Extreme and Dell Desktop XP with ethernet
I have a Dell desktop computer at home with a cisco cable modem connected to Comcast. I am trying to setup a new wireless network using new AirPort extreme so that new iPad can use wireless.
Connections seem to work but when running the AirPort Utility, it doesn't find my base station. The Dell doesn't have wireless. Does the Airport Utility only work via wireless? Or can it work across the ethernet connection?
I'd appreciate anyone's help.
Thanks.
Hello VL Crew. Welcome to the Apple Discussions!
Does the Airport Utility only work via wireless?
No, the AirPort Utility will work whether your computer is connected to the 802.11n AirPort Extreme Base Station (AEBSn) by wire or wireless.
Similar Messages
-
I had a Time Capsule running in an AV Cabinet and it made too much noise as it backed up and ruined soft/quiet music passages (and created far too much warmth as well). So, I visited the local Apple store and the guy I met worked through a few solutions with me. I decided on an Airport Extreme for the audio cabinet, and would move the Time Capsule to another room where it would not create noise interference.
So, I have the Airport up and running perfectly well. I changed my wireless network name and password.
I cannot get the Airport Express and Time Capsule to show up on my network. They both just blink that brown/orange color on the front. When I go to the Airport Utility, it does not pick up the Time Capsule or Airport Express. I have tried unplugging and plugging back in and scanning for devices, but dont know what else to do. Are they still looking for my old network? Is there a way to reset them??
Thanks for any help.I've tried the option key on both--the AEBS offers 14 options, including Automatic, while the TC offers 8 options, and no Automatic. The AEBS lists (among others) 802.11 a/n-b/g compatible, 802.11 a-b/g compatible, or 802.11 n (5 GHz)-b/g compatible. The TC offers 802.11.n (b/g compatible), 802.11n only (2.4 GHz), and 802.11n only (5 GHz), among others...
I had already followed the instructions in the link you supplied, except that the wireless options don't quite match...
I am currently trying 802.11n (5GHz)-b/g compatible on the AEBS and 802.11 (5GHz) on the TC, which gives me a rate of 270 on my n devices and 54 on my g devices, according to the Airport Utility.
This might be the best I can do, without buying a new TC. Thanks for any advice you can give...
C. -
PROBLEM with new Airport Extreme
i just bought the new airport extreme and what was supposed to be a simple setup process has taken longer than 10 hours!
please help!
i have 3 computers.
2 are macs, they will be using wireless. 1 is a PC, which will be wired to the airport extreme.
the airport extreme is connected to a VOIP router, which is then connected to the DSL router.
i have always used my old airport extreme without issues, but because i want to connect the PC as well, i must ditch the airport express in favour for one with LAN ports. hence, the troublesome airport extreme.
it doesn't work.
none of my computers can recognize the new network. (even though i've established one, with passwords and everything)
the router flashes amber - internet works, but not wireless.
the router periodically flashes green - ironically, nothing works then!!!!
please help!!!
EDIT: DIAGRAM
1. WHEN IT WORKED:
INTERNET --> PROVIDER ROUTER --> VOIP ROUTER --> AIRPORT EXPRESS --> MAC 1, MAC 2 (WIRELESS)
2. WHEN IT DOESN'T WORK:
INTERNET --> PROVIDER ROUTER --> VOIP ROUTER --> AIRPORT EXTREME --> MAC 1, MAC 2 (WIRELESS), PC (WIRED)It appears to me that you may possibly have sever conflict issues as well as maybe not having the Network confiqured correctly.
I have a 3 story OLD VICTORIAN and I am using the Old Airport Extreme Base and have expierianced NO PROBLEMS at all.
If I may suggest a different approach.
Try to start from scratch.
SHUT EVERYTHING OFF.
Run an ethernet cable from your Internet Service Providers MODEM to the WAN port of the Airport Extreme Base
Set it up DHCP and you want the Airport to distribute IP's
use the Airport setup assistant and Airport Admin Utility.
Using 2 Routers in the mix unless you have ony one the main to distribute the IP's, IF you have 2 Routers and they are both set up to distribute the IP's there is your problem.
The New Airport Extreme Base is far better then the older model and you shouldn't need another router in the mix at all to get the coverage of your entire house.
Take the Netgear clear out and use the Airport Extreme and the Expresses as you had them before. There is a very good possibility that you will need to do evrything one at a time and step by step.
Do not just plug everything in, and turn everything on and expect it to work. Do everthing step by step with all security disabled to begin with.
Be sure when you do your system reset that you start by powering up the MODEM 1st and wait for it to acquire the signal before you power up the Airport Extreme and again you must wait for it to acquire the signal. You can use the LAN Ports for anyyhing you need HARDWIRED. If you don't wait and do things in the proper order you will have problems, I can't stress enough that it must be done in the proper sequence. Have a look at the Paperwork of either the Netgear's Yellow Phamplet or the Booklet that came with the Extreme to bear out what I explained on the sequence.
Don -
Just bought a brand new airport extreme and having trouble with it being recognized. My mac is version 10.5.8. What should I do?
The new AirPort Extreme needs the 6.x version of AirPort Utility, which comes packed in with Lion 10.7.5 or Mountain Lion 10.8.x......or......you can also configure the device using an iPhone or iPad running a recent iOS.
From Apple's Specifications:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
A few options.....
Borrow another Mac running Lion or Mountain Lion for 10-15 minutes and set it up. The Mac running 10.5.8 will be able to connect to the wireless....but it will not be able to make any changes to the configuration of the Extreme.
Update to Lion or Mountain Lion.....but check first to make sure that your Mac will support the operating system first.
Use....or borrow an iPhone or iPad to set up the Extreme -
I have a new Airport Extreme and and old airport express. I am getting an amber status light on the Extreme and a green light on the Express. The Extreme is blinking amber all the time.
I have internet and everything seems to be working.
I have reset and pulled the power cord on both the extreme and the internet block
How do I make it Green?If things seem to be working OK, but the amber light is flashing......the AirPort Extreme has a message for you. To see what that might be......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon
Click on the amber dot in the small window
It might be a message that a firmware update is available for your AirPort Extreme. -
Using Airport Utility, OS X Yosemite sometimes does not find my airport extreme and my iphone 6 with 8.1 does find it. Is anyone else experience this glitch? Also I couldn't log on to Apple Support... Thanks
*Feedback*
"Use the form below to send us your comments. We read all feedback carefully, but please note that we cannot respond to the comments you submit."
http://www.apple.com/feedback/ipad.html
We can complain about Apple's business decisions, but these discussions are user to user talk about possible solutions.
Here are the places to report bugs:
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
-- click on New icon
-- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
-- etc. -
Brand New Airport Extreme and Motorola Surfboard 5101 Connection Dropping
I'm going to add to the chorus and point out that my brand spanking new Airport Extreme continually loses internet connectivity with my Motorola Surfboard 5101 modem (this is used on a Time Warner connection).
Disconnecting the Airport and connecting directly to the modem via ethernet cable works flawlessly as does using my old Linksys router. With the Airport Extreme it will work for a number of hours and then drop the internet connection. Airport Utility shows the Airport Extreme as having a green light while the internet connection has the amber "disconnected" light, but, as I said, cutting the Airport out of the connection leaves my internet connection stable and flawless so it seems the problem is either the Airport or the combination of the two.
So, is the only solution to replace the cable modem with one that works with the Airport? If so, how do I know what will work and what won't?
Should I return the Airport? Get a completely different 802.11ac capable router (which one)? Perhaps there is some arcae setting buried deep in the bowels of one device or the other that needs setting?It's ok, I got. You have to put in password "BT" Never had to do that before, but it works....maybe this helps someone else.
-
Hello,
I purchased a new Airport Extreme at the Apple store today and have it connected with a new Zoom 5341J. ISP is Comcast. I hooked everything up and I do have a solid connection....however my 2008 MB pro and iPhone 6 are maxing out at 30mbps on wireless. I had over 100 mbps hardwired. Its weird because it stops right at 30mbps during OOKLA speedtest. Something isn't right. I am hooked up to 5 ghz at channel 161.
Any suggestions?thanks for all of the help!!
Nevermind I figured it out myself. The zoom modem I was using is not compatible to VOIP, so I just went back to my technicolor and put it in bridge mode with the airport extreme and I am now getting 130mbps+ both wired and wireless.
Thanks! -
Does new Airport Extreme slow down when used with Airport Express?
Maybe this is self-evident.
If get the new Airport extreme and use an old airport express to extend it, will signal slow down to the old speed?
Does the AE have a greater range? Perhaps I don't need the Express to extend.
I live in NYC and there are so many signals in the air. It seems like having the additional airport helps keep me connected.
Thanks.The airport express is g technology not n technology, so it will be at least as slow as your old network. Also, I'm not sure but I think the the range will be a bit longer than with the old g system, but does not have the full potential of an n system.
I've set up my new system but none of my machines are n capable. I extended the system using my old expresses. The speed of the system is no greater than what it was before the n.
I bought the system to upgrade my technology because everytime my Applecare runs out, I get a new computer which isn't too far down the road. I've purchased an Apple TV which will also work better with the n technology when I upgrade. It's either buy it now or buy it later. I'm also hoping that some third party like Belkin will develop a PCIX card to provide n technology to those of my computers that aren't currently n capable. I'm sure there is many like me out there. -
New airport extreme card seems to interfer with my mouse
my new airport extreme card seems to interfer with my cordless microsoft mouse
any suggestions.?
thanksits a microsoft optical wireless mouse.
I think the problem resolved itself.
thanks anyhow -
Problems with Bonjour, Airport Extreme and OS 10.4.3
I have a networked, HP Photosmart 8450 printer. The printer was connected to both an iMac 20" and PowerBook G4 15" running OS 10.4.3. Yesterday, I lost the ability to print from the PowerBook. I have identified it as a problem with my Airport Extreme connection.
The iMac can see the printer just fine, and it shows up using Bonjour when I browse printers in the Printer Setup Utility. The PowerBook, however, cannot see the printer - that is, it does not show up in the browser, but only when I use the Airport connection. However, when I connect the printer to the PowerBook via USB, or when I plug a network cable in to the PowerBook, it sees the printer immediately using Bonjour.
It appears, then, the problem is with my Airport Extreme card. Has this issue been identified by anyone else/Apple? Perusing the discussion boards, it seems others have had this problem.
PowerBook G4/iMac Mac OS X (10.4.3)Thanks for the response, however, my question remains: I'm wondering if anyone else with an Airport Extreme ("b" version) and OS 10.4.9 installed has a problem using Admin Utility 4.1.1 and/or Airport Setup Assistant 4.1.1? Specifically, the problem is, after resetting the Airport Extreme, I was able to set it up using the Setup Assistant (establish the network, set the password), but thereafter, it does not show up in the Admin Utility at all (but the Extreme's lights flash as it is being accessed) and in Setup Assistant, it shows up, but there are "errors" when trying to change settings. It is very odd.
When I was running 10.3.9, I had had no problems setting up/administering my Airport Extreme. Suspecting the Extreme itself, I even had an Apple Genius inspect it at the Apple store, but it was pronounced in working order. I might try to check the Airport card inside the G4 (by trying it in a friend's G4). If this communication problem is not shared by anyone else (ii.e., a software issue), it could be my Airport card. -
Speed problems with new Airport Extreme
Hi,
I just bought the latest Airport Extreme, and am using it as my router directly from my internet provider, a hole in the wall, with a normal cable between.
If I hook the cable right to my computer I get between 500-800 Mbit speed, all the time, rock solid, so my internet connection is very good!
Now, when I hook it up to my new AE, it works fine most of the time, or let's say 70% of the time. The other 30% the speed drops down to roughly 20-50 Mbit from the normal 250-400 speed when using the AE. Itäs not only that the speed drops, all my streaming devices stop working. I have three wireless speakers and an Apple TV. Normally it all works fine... but suddenly they all stop working, and that is when the router (AE) drops in speed.
Sometimes I have to plugg the plug on the AE, to restart it, and it works fine agaian, but sometimes ther's nothing to do.
It feels very strange that you one minute can have 400+ Mbit and then sudenly down to 20, and then back again...without doing anything at all in your apartment with your devices. I run on the 7.7.2 firmware...
Any clues?I've got a similar sounding issue except when it happens to mine, it stays super slow until I reboot the AE. Not just changes some settings and let it update/refresh, I have to power cycle it. My internet connection isn't quite as fast as yours but it still should be a lot faster than what it is when this starts.
I have a 30Mbit connection. After power cycling the AE, it runs fine for several days. Then at some point, it gets extremely slow. Trying to load any web page takes roughly 30-45 seconds sometimes before it really seems like it starts getting a response from the server and starts downloading the page. I've tried a few pings and the requests continually time out for a while and then it will finally pick up and work.
I'm not real sure what to do about it. I'm wondering if the newest firmware upgrade has anything to do with it. I didn't see this issue until after updating to 7.7.2. May be completely unrelated but thats the only thing I can think of that has changed lately. -
Can I add a WiFi printer through WPS with the new AirPort Extreme and AirPort Utility 6.3?
It says here that AirPort Utility 6.2 supports WPS-capable WiFi printers, but on the new AirPort Extreme techs pecs Apple insists that the way printing is shared is by connecting the printer to the AirPort Extreme with a USB cable, which really defeats the whole purpose of WiFi printing doesn't it?
Does the new Airport Extreme support WPS-capable printing? Does AirPort Utility 6.3 support it?Does the new Airport Extreme support WPS-capable printing?
Yes
Does AirPort Utility 6.3 support it?
Yes -
Help setting up Open DNS with new airport extreme
I cant seem to get Open DNS to work with a new airport extreme. The status says I am not using Open DNS and its not filtering anything. I have followed the exact steps for set up listed on their website, checked the dns settings, cleared both caches and restarted the computer, modem and router with no success. I set the airport up in bridged mode, although I tried the other option under setup, but not sure what I was doing? I picked up this router because I wanted easy set up and the apple store assured me it would work with Open DNS. Oh, and I also downloaded the latest firmware update on the router. Can anyone help me with the settings or what else I need to check?
Sorry, I am not familiar with this product, so I checked online to pick up some information. Here I am referring to the information found here:
http://www.dslreports.com/faq/6096
I found that your device is mentioned as follows in the intro under Section 1 of this document:
The BellSouth supplied Westell 2100, 2200 and 6100 models (Models A90-210030-04, B90-220030-04, and B90-610030-06/C90-610030-06, respectively) share many features and functions.
Next, I am referring to the information under Section 2, under the heading of Standard Default Mode Connection (separate hub or switch present). Unless you have changed the configuration on the Westell, this is how your device is operating. In this mode, the Westell device is acting both as a modem and router in one unit.
So, an attached router (AirPort Extreme) must be configured as a switch to work correctly. That is what Bridge Mode is....the AirPort Extreme is operating as a switch when it is in Bridge Mode (which would be the correct setting to use when the Westell is set to its Standard Default Mode).
Any changes that you want to make regarding DNS settings would need to be made on the Westell device, since it is acting as the main router on your network.
In Bridge Mode, the AirPort Extreme simply passes that information through to its connected devices. You will not be able to make any DNS related changes on the AirPort Extreme since it receives that info from the Westel device. Some service providers force you to use their DNS servers, so you might want to check with Bell South or AT&T for more information in this regard.
If you want to be able to configure the AirPort Extreme as the main router on your network, and instruct it to use the DNS information that you want, you will need to refer to the section under the heading of Bridged Ethernet Mode ( separate router present).
Please note that the first item under this heading specifies that "This is the preferred configuration when using a separate external router..." (which would be the AirPort Extreme in your case)
So, it appears to me that this would be the way that you must reconfigure the Westell device to allow the AirPort Extreme to function as the "main" router on your network. In this type of setup, you will be able to enter the DNS information that you want to use under the setup for the AirPort Extreme and it will act as you instruct.
The AirPort Extreme would not be configured in Bridge Mode for this....it would be configured to "Share a public IP address".
The next item in the article specifies that you "Must use a PPPoE client on the Router." This means that the AirPort Extreme would be configured to Connect Using = PPPoE as follows:
AirPort Utility - Manual Setup
Click the Internet icon
Click the Internet Connection tab
Connect Using = PPPoE
You would enter your user name (probably your email address), password, etc in this area. Leave the Service Area box completely blank. Set Connection to Always On, and Disconnect if Idle to Never
Click Update to save the new settings. Power off the Westell device after this and then restart it so that it will pick up the new information that you have programmed into the AirPort Extreme.
I want to stress that this is how I would try to configure the Westell and AirPort Extreme. But, as I said, have not used a Westell device, so I cannot say that this will work correctly for you.
It might be an excellent idea to contact Bell South or AT&T Support to ask for their opinion on this before you decide to change the configuration of the Westel device and the AirPort Extreme.
This type of thing can be intimidating for users, so you might elect to use the services of someone like the Geek Squad at Best Buy, or a similar service from a local computer firm. Perhaps the Apple store could help as well.
If it is not critical that you use Open DNS, you might want to simply leave things "as is", with the AirPort Extreme in Bridge Mode. -
I have been using a Mac Mini with an external hard and Time Machine. I bought an Airport Extreme and have had problem setting up the hard drive using the USB port on the Airport Extreme. I also just recently bought a Mac Book Air and hope to have both computers back up to the external hard drive using Time Machine and Airport Extreme. I have been using the optical drive from the Mac mini to load programs into the Mac Book Air. I think I'm just getting confused in Finder. I am just not seeing the hard drive. I ended up plugging the hard drive back into the Mac Mini and that is work fine again. How do I setting the external hard drive up to the AirPort Extreme and use for both computers? Or at least to start with the Mac mini.
It's critical to understand that Time Machine (TM) stores backups differently between local and network drives. That would mean the TM backup on your locally attached USB hard drive will not be directly useable when it is connected to the AirPort Extreme Base Station (AEBS). There is a way to copy a local version to a network version, but it is not fool-proof. When you do connect this drive and point TM to it, TM will start a brand new backup, leaving your existing backup as is.
If your current backup is critical to you, you may want to consider getting a second USB drive to attach to the Extreme and use your existing one as a backup ... or use TM's multi-backup process to backup to more than one destination drive alternatively.
So, at this point, you may want to make a decision on how you want to go forward to help provide a solution for you.
To directly answer your question, when you go to select a destination for a Time Machine backup, the drive(s) that show up under "Backup Disks" are those that TM already recognizes and has backed up to. Those listed under "Available Disks" are drives (either local or on the network) that TM can back up to.
Maybe you are looking for
-
Screen fields not getting displayed after Line 16
Hi All, There is a screen exit created in IW51, now the new requirment is to add 3 more fields. I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not
-
I perchase Iphone 4 before from Jarir book store saudi arabia. with one year warranty. but after just a one month later i found a minor problem in power button but i neglect it and was using it. but later Almost 8 months i Bring it to icare Shop Whic
-
i just moved my safari off the bottom line of icons on my mac. where do I find now, or how do i get it back?
-
OS 10.4.9 - RAID - External Firewire Striping questions
Hello, I have an Apple XServe running 10.4.9 Server, serving a handful of Apple 10.4 clients. We were looking to add inexpensive storage to this server, so we purchased three Lacie External BigDisk Extreme Firewire drives, daisy chained them together
-
Hi Can anyone pls suggest whats the Table for Object IDs of Vendor Organisation get stored. Regards --Vikas