Setup script document for Sourcing implementation

Hi,
Please can one share a setup script document for Sourcing implementation ?
Regards.

Hi Ram,
See wiki page:
General PPDS wiki page
http://wiki.sdn.sap.com/wiki/display/SCM/APO-PPDS
Setup Matrix Generation in a Complex Manufacturing Evironment
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a618c4-8aad-2b10-6ebb-f70cb4470195
Oficial doc
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a618c4-8aad-2b10-6ebb-f70cb4470195?quicklink=index&overridelayout=true
Hope this help.
Luiz Giani

Similar Messages

Document for HRMS Implementation in 11.5.10.2

Hi,
We are currently working in 11.5.10.2 version & Oracle 9i database. Can anyone suggest me any document or method for implementing the HRMS module and the setups that should be done to implement it successfully. Thanks in advance.
Regards,
Rao

Hi,
Based on your country legislation you have to follow the instruction of application setup rules. Once you complete the setup you can apply required patches if any comes after the version you have installed. Best to check at Metalink for latest patches.
To meet local legislation you have to keep up-to-date your application always.
Thanks
Ajit

How to setup a document for tabloid and letter printing?

Hello,
I need to make a brochure. It is 4 pages. We need it for two different end products:
1) Printed onto double-sided 11 x 17 tabloid in a landscape orientation. It will then be folded in the middle (so a 4 page brochure).
2) A 4-page 8.5 x 11 PDF, for clients to print out themselves.
I originally had a 2 page tabloid document (no facing pages). It worked great when I sent it to our printers, but I couldn't PDF it properly to 8.5 x 11. What I ended up doing was making a brand new 8.5 x 11 document, then laying out each individual letter-sized page.
When changes are required, I have to make changes to both documents, which is annoying and open to error/mistakes from me (e.g. change in one document not in the other).
Is there any way I can have a single document setup so that I only need to change output/export/print settings when making my two different end products?
My skill level in InDesign is beginner, so alot of terminology is beyond me.

Did you know that you can place an InDesign document into another InDesign document?
Start with your letter-size version, and make sure it's up-to-date. Save it, close it, then start a new empty tabloid document. Go to File -> Place and place the four pages of your letter-size document into your tabloid document.
When you need to update both docs, then make the text changes in the lettersize doc. Save and close, then open up the tabloid doc and update the links. In fact, unless you've changed the way your install of ID is set up, then the moment you open the tabloid doc, it should ask you if you want to update your out-of-date links.

How to setup new document for Desktop Wallpaper

hi all
new to the forums here...
i'm making a desktop wallpaper to display an announcement for my graphic design department at school, and i'm wanting to know the best way to set up the new document in PS CS4. i'm using the resolutions found under syst prefs > display prefs, just plugging those numbers into the new document setup for width and height. my question is what resolution i should use for a clean and sharp wallpaper, and should i just accept the default settings for color mode, color profile, and pixel aspect ratio.
FYI: right now i'm working on an 20" Intel iMac. models at school include 17" iMac G5's or early Intel iMacs, 20" and 24" aluminum Intel iMacs.
thanks in advance,
daniel

"my question is what resolution i should use for a clean and sharp wallpaper, and should i just accept the default settings for color mode, color profile, and pixel aspect ratio."
The resolution is irrelevant - pixel dimensions are all that matter. For instance, if the target desktop dimensions are 1920x1200 pixels, it doesn't matter if the resolution is 72 ppi or 300 ppi. Color mode should be RGB, profile should be sRGB and use square pixels.
-phil

How to setup a document for self expiration\Limited usage after a while?

Is it possible to setup a .PDF file to make it unwatchable after a certain number of invocations and / or date? Is there also a solution to the problem of the reader first doing duplicates of the file? Once the document reached its limit, it is desired that rewinding the clock, etc. would not revive the usability of the document. I intend the document to contain a picture, hopefully this doesn't make a difference.
If achievable, what minimum level of Acrobat version is required to generate and what minimum version of Acrobat Reader is required to open the file?
If Acrobat/.PDF technology wont do it, are there any other means to accomplish the task?
Thanks,
David

You can use the server product 'Adobe LiveCycle Rights Management':
http://www.adobe.com/products/livecycle/rightsmanagement/

Compensation Workbench Setup and Test Script document....

Hi,
Does anyone out there has setup and test script document for Compensation Workbench that you are willing to share?
Thanks

Hi,
For single system landscape..
Go 000, DDIC ... STMS--> here it will ask for domain controller -- give self domain ---> Domain controller has been assigned .
Now again goto STMS> System overview>SAP SYSTEM >Create ->Virtual system- give name V<SID>
till this point your domain controller is created and virtual system is created .Next our aim is to setup STMS
again goto STMS>transport routes> change > configuration>statndard configuration ---> select second option (development and productino System ) because here your dev system will your own system and virtual system would be production system .
---> pop up will come -> give DEV - SID and Productino SID- it willl automatically create the route .
Save this and exit.
This way We can set single system landscape.
Thanks and Regards,
Arun Rathour

Help document for Implementation Guide

I can't find the help document for SAP Implementation Guide (IMG) in ECC5.0
But I can find this document in R/3 4.6C.
So,where can I find this document in ECC5.0 or ECC6.0,I want to learn the configration guide.
Else,can anybody find the IDES document in ECC5.0?

Hi,
Kindly check the following links:
http://help.sap.com/content/bestpractices/baseline/bestp_baseline_baseline_V500.htm
http://help.sap.com/content/bestpractices/baseline/bestp_baseline_baseline_V600.htm
http://help.sap.com/bp_bblibrary/500/BBlibrary_start.htm
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
you can find the documents for SAP Implementation Guide (IMG) in the above links.
hope this helps!
best regards,
Thangesh

SAP localization documents for UAE

Hello Experts,
Can somebody advise me where to get country specific localisation documents for SAP implementation in UAE. It will be great if somebody can share out of his/her firsthand implementation/rollout experience certain areas which need special consideration for SAP implementation in UAE.
Regards,
Chandra

Hi Chandra
The following link could be of some help
http://help.sap.com/bp_bl603/BL_AE/html/index.htm
Regards
Sach!n

Document for PPDS Optimizer Setup Matrix

Dear All,
Can I have a document or an implementation guide for PPDS Optimizer Setup Matrix?
I have already checked the SAP help and Certification Material about this topic. But there is no more information on this topic. It will be great if you provide a document where I can learn from the scratch.
Thanks a lot.
Regards,
Ram.

Hi Ram,
See wiki page:
General PPDS wiki page
http://wiki.sdn.sap.com/wiki/display/SCM/APO-PPDS
Setup Matrix Generation in a Complex Manufacturing Evironment
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a618c4-8aad-2b10-6ebb-f70cb4470195
Oficial doc
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a618c4-8aad-2b10-6ebb-f70cb4470195?quicklink=index&overridelayout=true
Hope this help.
Luiz Giani

Can you give a document link for script logic for NW version7??

Hi all,
    who can give a document link for script logic for nw version7??
    thanks in advance!!

Hi Sheldon,
I read through your "HOW to...Custom BADI for replicating Destination_App...." and it was great. However, Can this call also be used with WHEN/ENDWHEN statements? In the MS version, when using Destination_App, I was also able to map source accounts into the correct destination accounts as well as source E type dim to desination E type dim with the following script (the mapping to destination ID was stored as properties within the source dimensions).
*INCLUDE SYSTEM_CONSTANTS.LGL
*SELECT(%OPACCT%, "[ID]", "OPACCOUNT", " [TRF_FPA] = 'Y'")
*SKIP_DIM = COSTCTR
*ADD_DIM = BRANDS
*RENAME_DIM OPAccount = Account_F
*RENAME_DIM CATEGORY = CATEGORY_F
*RENAME_DIM ENTITY = MARKET
*RENAME_DIM DATASRC = DATATYPE
*XDIM_MEMBERSET ENTITY = %ENTITY_SET%
*XDIM_MEMBERSET CATEGORY = %CATEGORY_SET%
*XDIM_MEMBERSET TIME = %TIME_SET%
*XDIM_MEMBERSET OPACCOUNT = %OPACCT%
*DESTINATION_APP = FPA
*CLEAR_DESTINATION
*DESTINATION OPACCOUNT = %OPACCT%
*DESTINATION TIME = %TIME_SET%
*DESTINATION CATEGORY = %CATEGORY_SET%
*DESTINATION CURRENCY = LC,USD
*WHEN ENTITY
*IS %ENTITY_SET%
*REC(ENTITY=COSTCTR.FPA_MKT,OPAccount=OPAccount.Consol_FPA)
*ENDWHEN
*COMMIT
I have tried the following code in the NW version, and it won't validate. Do you know if there's a way to achieve this?
*XDIM_MEMBERSET CATEGORY<>ACTUAL
*XDIM_MEMBERSET ACCOUNTHR =BASE_ANNL_SAL,BONUS,BENEFITS_TAX
*XDIM_MEMBERSET CURRENCY=LC
*START_BADI DAPP
DESTINATION_APP=CC_PLAN
RENAME_DIM="ACCOUNTHR=ACCOUNTCC"
WRITE=OFF
*END_BADI
*WHEN ACCOUNTHR
*IS "BASE_ANNL_SAL","BONUS","BENEFITS_TAX"
*REC(ACCOUNTCC=ACCOUNTHR.CCPLANACCT)
*ENDWHEN
Regards,
Karen

Documents associated with the setup scripts

I find setup scripts for
DATA INTEGRATOR TRANSFORM SAMPLES : http://www.sdn.sap.com/irj/boc/ds?rid=/library/uuid/501c68c5-b066-2b10-0391-ecb9f020d408
and
Setup scripts at the Data Services wiki : http://wiki.sdn.sap.com/wiki/display/BOBJ/Setup+scripts
Is there any associated documents to accompany them . The data transform samples are somewhat explanatory. Are the wiki chapters associated with the setup scripts ?
regards
Rishi

Hi Dhaval,
The standard objects which you have mentioned are tables. And tasklist is a structure. The solution is you can create a view of the tasklist in SAP DMS object link and the dms screen in tasklist IA03 transaction. for this abap enhancement is required)(z-development). This can be achived. But the difference is that like EQUI ,MARA,LFA1 these are tables and standard objects. for adding another objects there is different method(tables). In your case it's structure so make view of it with help of abap'r.
I hope this will resolve the query.
Regards,
Ravindra

Document for configuration of the spend management in SAP E-Sourcing

Hi All
Is there any document for configuration of the spend management in SAP E-Sourcing 5.1
I have checked the RG section of the application and also all the documentation delivered as a part of the ESO software download
Unable to locate this, request you to redirect me to the link on the service marketplace from where I can download this, as far as I know, its not available there.
Currently I get the following error mentioned below for every menu option clicked under the spend and Compliance Tab
Error: The spend analysis environment is not ready to provide spend data
Request feedback
Regards
Tridip

Hi Kamalakar
This is great piece of information, I checked the same place i found the following
Module Name
Auctions License
BOM License
Contracts License
Demand Aggregation License
Frictionless SRM Product License
Optimization License
Projects License
RFQuick License
RFx License
SRM Explorer License
XPress Print License
Do you think am missing the spend license, whats that called, request you to let me know
Regards
Tridip
Edited by: Tridip Chakraborthy on Apr 15, 2009 8:48 PM

Setup one-step auto GR on consignment STO for sourcing plants

Hi MM experts,
Need to set up the auto GR process for some plants
Can any one please help me how to Setup one-step auto GR on consignment STO for sourcing plants?
Appriciate your help.
Thanks in advance.
Regards
Suresh Babu J

Hi,
According to my knowledge there is no standard functionality regarding automatic GR for STO. You need to go for enhancement in this regard. You can consignment PO during MIGO with required settings. Thanking you.

Blue Print Document for IS OIL IMPLEMENTATION

Please provide me Blue Print Document for IS OIL Implementation .
so that i can use it as a Reference .

chk the template .. it may help
OILY
http://help.sap.com/bp_miningv1472/index.htm
SERCH FOR DOWN STREAM

Setup document for FSG

Hello,
I have little idea about FSG but i couldn't map the balance sheet/Trial balance/Profit & loss...so kindly send me any document for setup....It will be big help
Thank you in advance@@

You can refer the below FSG whitepaper
https://community.oracle.com/servlet/JiveServlet/downloadBody/912237-102-1-28873/FSG%20Setup.PDF

Setup script document for Sourcing implementation

Similar Messages

Maybe you are looking for