Setup SM 4.0 to allow me to approve support packs/stacks for download
I need a doc or a procedure to setup Solution Manager for approving support packs/stacks for download. I havn't had much luck finding a good one.
Have you configured Maintenance Optimizer , if not use the following link to see the documentation for configuring MOPZ
https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000689877&
From the above link click on <b>SAP Tutor on Maintenance Optimizer</b> this will show you how to use Maintenance optimizer and <b>Step by Step Configuration of Maintenance Optimizer SP Stack 09</b> will help you to configure Maintenance Optimizer. ( scroll down to bottom to see the links)
Thanks
Prince Jose
Similar Messages
-
Hi all, as Ive said in the question, anyone help me with this, have tried most of the suggestions Ive found so far.
StephenNo, Nothing happened, nothing was downloaded. When I say nothing happened I mean NOTHING HAPPENED, What can I say to make it more clear. How could I run a file that wasn't downloaded.....Nothing happened, rien, nada, b***** all. Why would I post a message saying "When I press the Save button nothing happens" if something had been downloaded.
I've found out why. It is because I am using Firefox. Presumably a case of Apple treating us users of the superior Operating system (Windows) with distain. -
I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password even though itunes recognizes my password
This has been posted for almost 2 weeks and not one reply. Thanks a bunch! As a newbie to OOo and Mozilla, I am not impressed with responsiveness to support needs with either. So, the future of my new experiment with going non-Microsoft remains an open question.
Oddly enough, the problem mysteriously went away. I have followed the same routine and changed no settings. Suddenly all of the downloaded spreadsheets were no longer read-only. So I consider the matter resolved. -
I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?
A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482 -
How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.
Hi,
Thank you for posting in Windows Server Forum.
Here adding to the words of “Tim”, a forwarder is a DNS server on a network used to forward DNS queries for external DNS names to DNS servers outside of that network. You can also forward queries according to specific domain names using conditional forwarders.
A DNS server on a network is designated as a forwarder by having the other DNS servers in the network forward the queries they cannot resolve locally to that DNS server. You can refer information regarding forwarders and how to configure from beneath link.
Understanding forwarders
http://technet.microsoft.com/en-us/library/cc782142(v=ws.10).aspx
Configure a DNS Server to Use Forwarders
http://technet.microsoft.com/en-us/library/cc754941.aspx
Hope it helps!
Regards. -
When Upgrading on my laptop from iTunes 10.2.11 to 10.5.0 the message I get is: "There is a problem with this Windows Installer Package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or pacakge vendor.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
can i restrict apple mail client from downloading all emails...and allow it to pick a start date for gmail mail to sync? i am flooded with old emails, thousands on them ...eating hard drive space of my macbook pro and un necessary overhead
The genius bar technicians can check your MBP for possible hardware problems and specific software issues that you may have. The diagnosis will be free. Any extensive repairs will not be free.
If you have minor software problems, you essentially will have to deal with them yourself. Examine these two comprehensive documents for possible problem definition and solutions. If you encounter problems that you are unable to cope with, start a new discussion and there will be persons willing to assist you in solving them.
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
Ciao. -
I am trying to save a mp3 file but firefox does not allow me to save it...it allows me to play the file but not download and asave it to my computer. How do I enable Firefox to save mp3 files on my computer?
Go to Options>Applications tab > search MPEG Layer 3 audio(audio/mpeg) > use "Save File" option on drop down menu.
-
5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!
I am experiencing the exact same issue during the installtion process for iTunes 10.5.
I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP! -
Photos will not allow me to set the key picture for the album or event
Photos will not allow me to set the key picture for the album or event - it is set to grey !
Anyone else had this and found why ?
new PHOTO app replacing iPhoto bugs/ Problems OTHER PROBLEMS :
- no longer has a five star rating system
- my keywords for selecting albums are gone.
- cannot copy location of one photo to another
- cannot have an album with keywords AND rating > a value
- cannot set key photo of album/event
- multi parameter search feature gone
Anyone got any ideas how to get around this terrible downgrade of the software ?
BTW I have just discovered that iPhoto and its' libraries are still there, so I can go back but be left behind and frozen in time on this version if I do.
Photos now take up 700Gb whereas it was 350Gb #@!$#@!@#!@#
ThanksThat are all good points - but Photos is a completely new application. and it is only version 1.
Continue to use iPhoto, girraween; the next update to Photos will probably add a few more features.
iPhoto 9.6.1 is working very well with MacOS X 10.10.3.
The migration let iPhoto installed and also your iPhoto Library will still work with iPhoto.
If you did not uninstall iPhoto, it will still be there in your Applications folder. And if you had updated to the latest version iPhoto 9.6.1 before you upgraded to MacOS X 10.10.3, you can simply drag iPhoto back to the Dock from your Applications folder and continue to use it. Double click iPhoto and confirm, that you want to open iPhoto and not Photos. It is not compulsory to use Photos, while it it still the first release. When you launch iPhoto, you will see a warning, that the iPhoto Library has been migrated to Photos, but simply click the "Open iPhoto" button.The library will still work with iPhoto. ()see: If Photos won't open a library that you already migrated - Apple Support
If your iPhoto version is not iPhoto 9.6.1, you need to update it.
See this User Tip:
Usually it will work to reinstall instead of updating:
Get iPhoto 9.6.1 if you didn't update before OS... | Apple Support Communities
The main idea is to move the iPhoto app to the Trash, so Spotlight does not see it as installed, reload the AppStore, and then to try to download again from the App Store - from your Purchases tab, not from the main page, since you can neither buy iPhoto nor update it, but you can reinstall, if your AppleID is associated with it.
Meanwhile you may want to send a feature request to Apple using the feedback form. Apple - Photos - Feedback
I hope, Apple will listen and add more features to Photos to make it usable for large Photo Libraries. -
I Tunes will not install. I get this error message: There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Does anyone have an answer?
TRy the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Each time I attempt to download the new itunes 10.5 I keep getting the following error message:
Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SoftwareUpdate_UnregServer, location: C:\Program Files\Apple Software Update\SoftwareUpdate.exe, command: /UnregServer
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any Ideas of how to solve this one?After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
When downloading Itunes I get this message:
There is a problem with this Windows Installer package a Program run as part of the setup did not finish as expected.
Contact your support personnel or package vendor..
is there a number for me to call or can someone explain what has happen...
Thank you for your help....Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.
Maybe you are looking for
-
Server error when trying to download?
I have reported this to Nokia care, but have yet to receive a response. I tried to download Guitar Hero 5 - went to choose payment method - chose phone bill - then received a server error. So I tried again - chose phone bill as my payment method -
-
HT204053 imac- setting up icloud- no icloud display in preferences. How do i install it?
trying to set up my sisters imac do do back-up on cloud. Under system preferences there is no icloud icloud icon- only wireless etc. Where/how do i turn on the icloud icon
-
I have upgraded to iTunes 8.1 via the Software Updater on both my Macbook and work HP Laptop. On both, I've had real troubles getting iTunes to import music from my Time Capsule (around 600GB). While it recognises the files, I had it running all nigh
-
Mac ox 10 script error when trying to install on wallstreet
I have os 9.0 installed on a wallstreet and I cannot instal PUMA OR JAQUAR. I get an installer script error at boot up from CD
-
Search and replace for Unicode characters
Hello, I have a function which searches and replaces characters on file. It works with ASCI sharacters, but not when the strings which needs to be replaced contains Unicode ('á', 'ā') etc. The source file is codding utf8 . $file = "file.txt" $Searc