Setup sol-8 reboots (dump device not found)

i have a pIII intel system and im trying to setup sol 8 on it. it detects the hardware but when it gets to the interactive and jumpstart and i select either of the two, the system gives a brief message, no dump device found, rebooting and reboots. it does this on and on. i saw similar problems like this that had been logged since lkast year, and there has been no answer to them, does that mean that there is no solution to this.?

Hi Thon,
I would be happy to assist if needed in English. Please let me know what is your model number and your current operating system? Here is a link that will help you find out your model.
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • Photosmart 7515 connect via USB but not wireless, Device not found on Network

    Purchased a 7515 all-in-one, was able to setup wirelessly to MacPro but has lost ability to connect wirelessly.  This happened with OS X Lion and nor MountainLion.  Have a TimeMachine Airport.  Printer connects to network but during setup from MacPro, repeatedly get "Device Not Found on Network" after stepping through wireless installation setup screens.  I have reset router, printer, firmware updates, software updates.... at wits end.  I have followed the instructions on the below resource page link with no luck.  Use WPA-PSK encryption (Automatic AES or TKIP) on network and diagnostics on printer pass.
    Please help anyone!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02946597&tmp_task=solveCategory&cc=us&dlc=en&la... 

    It sounds like the Macs and the printer just aren't communicating.
    If you press the network icon on the printer, does it indicate it is connected to the network?
    I recommend two additional steps that are not listed in the linked document.  The printing system of the Mac may need to be reset as it will clear any software that could be interfering (such as corrupted installations).
    Follow the steps as outlined for 10.7 or 10.8 in this document from HP.
    The next step is to install the driver package from Apple.  This can be found here.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HP G42 Notebook Windows 7 - continued to crash - now says Reboot Device not found.

    I have a HP G42 Notebook Laptop 
    Product Number - XZO46UA#ABA 
    It is a Windows 7 64 - bit PC  
     What it has been doing is Constantly Crashing and going to blue screens, and when you move the mouse to turn it on the fans ill be very loud, and at times Lap-top will get extremely hot!!  Just Yesterday it crashed and then restarted but then it went to a black screen that says (Boot Device Not Found) and i don't think that i have a Reboot Disk!! 
    And there has been absolutely no Changes made to the PC before this issue had accured. 
    If anybody can give me any information on how to Fix this problem or if i have to go to HP store or have Technition come out? 
                      >>>Thank you!<<< 

    Please close the topic:
    Suddenly the system now recognises that the monitor has a 5-touch input and the installation is running.
    Not sure what solved it:
    - Had Windows check for a frech driver (it was up-to-date)
    - Fiddled around a little in Paint just to see if 5-touch input is working
    - Activated a second display (not touchscreen)
    I then looked at the System information screen again, and the number of tocuh point appeared correctly

  • I'm receiving error Boot Device Not Found and Hard disk not exist when I boot up my laptop

    I'm receicing the error Boot Device Not Found when i power on my HP G60-235DX laptop.  After following HP's recommended troubleshooting steps, I receive error Hard disk not exist.  Hmmmm....that's a little concerning.  My guess is I need a new hard drive?    I have the 17 recovery disks I made when I setup this laptop, however I'm not sure if they will resolve this issue.  Any suggestions?

    One of 3 things has happened, listed from most likely to least likely
    1. Hard drive has died, replace it with one of the same size or larger, then use the HP recovery discs to re-install windows.
    2, The motherboard has serious problems. (Replace the notebook)
    3. The hard drive cable that connects it to the motherboard has somehow failed, not very likely. (replace the cable)
    Replace the hard drive with a new one and use your recovery discs to get Windows back on it.
    Here is your service manual, will show you how to replace the hard drive
    http://h10032.www1.hp.com/ctg/Manual/c02985882.pdf
    Recovery Instructions for Vista
    Recovery Instructions for Windows 7

  • Device Not Found

    I have been using a Time Capsule with with Mac Air 13 inch for the last 1.5 years. the Time casule is the main wi-fi router in my network. off late i have started getting a message Device not found, where as the internet is connected. due to this error no data (time machine) back up is available. also this issue leads to internet disconnection on my Mac (where are other devices lice PC's and iphones are connected to the same network without any problem).
    Please help me if anyone has a solution.

    You hidden the most important thing.. the name of the TC. I don't know why as we can certainly not connect to it remotely.
    The name looks wrong though if I am seeing it right.. in terms of being too long and having spaces.. and possibly many of them.
    There is a bug.. if you reboot the TC this issue will go away for a few hours.. or days..
    Have you rebooted btw??
    Do a factory reset of the TC.
    Change all names to SMB standard.. that means universal not Apple only.
    SMB names that work..
    Short.. 2-20 characters
    No Space..
    Pure alphanumeric.
    You need that for TC name.. wireless name/s and hard disk share name.
    Please see C9 for a more apple explanation of what long names do.
    http://pondini.org/TM/Troubleshooting.html
    I would also go back to 7.6.1 firmware.. if not earlier.. 7.5.2 is very stable.. but later Gen4 can only go back to 7.6.x

  • HP 3050A : Device Not Found on Network

    Hi,
    Laptop Model: MacBook Air
    Operation System: OSx Lion 10.7.3
    Printer Model: HP 3050A
    Router Model: Linksys WAG160N
    WiFi Security Protocol: WPA
    TCP/IP IPv4 Protocol: DHCP
    Firewall Software: None
    I have manage to connect the printer to my WiFi network as the blue indicator is ON and got an IP 192.168.1.104 with Excellent signal strength on the printer. But when follow the HP Setup Assistant I unpluged the USB then I got stuck with the following error message:
    Device Not Found on Network
    The wireless network settings were successfully downloaded to your device. However, your Mac was unable to locate the device on the network.
    Please make sure that:
    • Your Mac is connected to a wired or wireless network that has access to your device.
    • Your device is connected to the wireless network "speedy".
    Click "Retry" to attempt to connect again using the current settings. Click "Go Back" to enter different settings.
    I also tried to ping the printer IP but no success
    Aliss-MacBook-Air:~ ali$ ping 192.168.1.104
    PING 192.168.1.104 (192.168.1.104): 56 data bytes
    Request timeout for icmp_seq 0
    Request timeout for icmp_seq 1
    Request timeout for icmp_seq 2
    Request timeout for icmp_seq 3
    ping: sendto: No route to host
    I am able to print using USB without any problem, but the WiFi never success! Please help!
    Regards

    Hello,
    Thanks for the post.  With this one, we may a couple of issues.  I've included a link below with some excellent information regarding network connectivity.  I might suggest that we start there and try to determine if it's the printer, the MAC or the network.  Good Luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02731071&tmp_task=solveCategory&cc=us&dlc=en&la...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • [SOLVED] Device not found and kernel panic

    Hi,
    I'm having an issue with the kernel. I get this weird error while booting:
    Booting the kernel.
    :: running early hook [udev]
    :: running hook [udev]
    :: Triggering uevents...
    ERROR: device '' not found. Skipping fsck.
    ERROR: Unable to find root device ''.
    You are being dropped to a recovery shell
    Type 'exit' to try and continue booting
    sh: can't access tty: job control turned off
    [rootfs /]# _
    I don't have the slightest idea what to type in that shell, so I exit (^D) and get an error with its shell, another one and finally a kernel panic. Do I have to report the other two error as well? I think this might be related to a recent change in my syslinux.cfg. I wanted to add hibernation cabability to my arch, so I added "resume=/dev/sda2" (my swap) to kernel options. It should not yield such a result though. As a matter of fact, I get it even if I remove that parameter at runtime. For now, I managed to boot with Fallback Initramfs.
    Here is syslinux.cfg, as well:
    # Config file for Syslinux -
    # /boot/syslinux/syslinux.cfg
    # Comboot modules:
    # * menu.c32 - provides a text menu
    # * vesamenu.c32 - provides a graphical menu
    # * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
    # * hdt.c32 - hardware detection tool
    # * reboot.c32 - reboots the system
    # * poweroff.com - shutdown the system
    # To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
    # If /usr and /boot are on the same file system, symlink the files instead
    # of copying them.
    # If you do not use a menu, a 'boot:' prompt will be shown and the system
    # will boot automatically after 5 seconds.
    # Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
    # The wiki provides further configuration examples
    DEFAULT arch
    PROMPT 1 # Set to 1 if you always want to display the boot: prompt
    TIMEOUT 50
    # You can create syslinux keymaps with the keytab-lilo tool
    #KBDMAP de.ktl
    # Menu Configuration
    # Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux
    UI menu.c32
    #UI vesamenu.c32
    # Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
    MENU TITLE Arch Linux
    #MENU BACKGROUND splash.png
    MENU COLOR border 30;44 #40ffffff #a0000000 std
    MENU COLOR title 1;36;44 #9033ccff #a0000000 std
    MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all
    MENU COLOR unsel 37;44 #50ffffff #a0000000 std
    MENU COLOR help 37;40 #c0ffffff #a0000000 std
    MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std
    MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std
    MENU COLOR msg07 37;40 #90ffffff #a0000000 std
    MENU COLOR tabmsg 31;40 #30ffffff #00000000 std
    # boot sections follow
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Arch Linux
    LABEL arch
    MENU LABEL Arch Linux
    LINUX ../vmlinuz-linux
    APPEND root=/dev/disk/by-uuid/dc891acc-9ff7-4d95-bba4-bc2e502301e7 ro
    APPEND resume=/dev/sda2
    INITRD ../initramfs-linux.img
    # (1) Arch Linux Fallback
    LABEL archfallback
    MENU LABEL Arch Linux Fallback
    LINUX ../vmlinuz-linux
    APPEND root=/dev/disk/by-uuid/dc891acc-9ff7-4d95-bba4-bc2e502301e7 ro
    INITRD ../initramfs-linux-fallback.img
    # (2) Windows
    #LABEL windows
    #COM32 chain.c32
    #APPEND hd0 0
    LABEL hdt
    MENU LABEL HDT (Hardware Detection Tool)
    COM32 hdt.c32
    LABEL reboot
    MENU LABEL Reboot
    COM32 reboot.c32
    LABEL off
    MENU LABEL Power Off
    COMBOOT poweroff.com
    Any ideas?
    Thank you,
    rubik
    Last edited by rubik (2012-07-22 10:03:59)

    Also, don't use "root=/dev/disk/by-uuid/...", that's just wrong. Udev kicks in after the bootloader phase.
    https://wiki.archlinux.org/index.php/Sy … nux_Config
    Here's mine:
    LABEL arch
    MENU LABEL Arch Linux
    LINUX ../vmlinuz-linux
    APPEND root=UUID=978e3e81-8048-4ae1-8a06-aa727458e8ff ro quiet vga=current
    INITRD ../initramfs-linux.img
    And don't forget to mark it as solved.

  • In-built Audio device not found

    Hi Guys,
    My macbook pro suddenly finds no audio device inbuilt. And i can play no sound nor hear start up sound when switching on mac.
    I get a 'no parking' like symbol beneath my audio options.
    I've tried rebooting in safe mode, Resetting PRAM, Repairing permissions in disk utilities, use my ipod touch headsets, headphones.. NOthing worked.
    And i'm feeling deaf whenever using Mac now.
    Is there anyway to get the audio back ?
    Thanks,
    Raesh

    Hmm.. Okay. Would give it a last try.
    And I have a couple question before doing that..
    1. I did the hardware test and It gave me this error .. " 4SNS/1/C0000008 :TPCD--24 "
        But When i looked up for this error, it tells me a sensor problem. Not as Audio device problem. Do you think this hardware error of 'sensor' has something to do with audio ?
    2. So in-built speaker isn't working, plugging in headphones cable isn't working. But i was wondering whether a bluetooth speaker would be recoganised in the system preferences > audio output device ? Will it work ?
    Because i keep on reading that an " in-built audio device not found " problem is a huge one and it costs a lot to repair. They often provide solution of changing the whole logic board (Keeping fingers crossed). And with my warranty period over, I don't wish to go through that path.  So want to know if external bluetooth speaker has a chance to get recoganised as an audio device, Then I would buy JBL bluetooth speakers. It seems good and less pricey than changing the whole logic board.
    Let me know which way i can go, Thanks in Advance Man.
    // Raesh.S

  • Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

    I started getting start-up problems with my hp pavilion dv6t-7000‏.  It happens intermittently. 
    The boot error is:
       Boot Device Not Found
       Please install an operating system on your hard disk.
       Hard Disk (3F0)
       F2 System Diagnostics
       For more information, please visit: www.hp.com/go/techcenter/startup
    Could a faulty BIOS update cause this problem?
    Anyone else who may have experienced a similar problem?
    I'd appreciate any help about this problem.  Thanks.

    Hi
    Please find the link given below might help you to fix your issue.
    Resolve Boot Device not Found Error Message
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • T410 bluetooth device NOT FOUND

    Hello Everyone,
    I have a t410, product id is 2539AJ6 (bluetooth included), running Windows 8.
    however i can't get bluetooth to work, in addition it seems like there is no trace for a bluetooth device on this computer:
    - Can't install driver ("Device not found").
    - Not Recognized by Windows 8.
    - on BIOS, Security -> I/O Port blah blah -> no mention of bluetooth settings there.
    where do i go from here? anybody ever encountered such an issue with bluetooth?
    btw, im pretty sure there is a bluetooth device on this laptop. 
    appreciate any help

    Here's the Link for the 2539-AJ6, it does indicate that you have Bluetooth.  Dowload and install the latest drivers.
    http://support.lenovo.com/en_US/downloads/default.page?

  • HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

    Have had HP Officejet Pro L7590 All-In-One Printer for years.  Always worked fine and I had no issues printing via wireless connection.  Several months ago..  Possibly after a Windows 8 update.  From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature.  When I try to print or scan it shows the printer as offline.  Also get an error message that tells me "HP Imaging device is not found".  I can still print when connected to USB.  Cannot scan or use features of the HP software suite.  I have tried several times to correct.  Reloading the software and drivers several times, but no success.  I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it.  Then tried to print something and got the same error message I have seen in the past.  I have talked to certain supports saying that it may be a firewall setting within Windows.  Any other suggestions?  Thanks

    Hi @rfjones002,
    Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
    I would like you to start with the steps listed below:
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
    Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
    Uninstall the software again - Uninstall the Printer Software Instructions
    When the uninstall has completed restart the computer
    Follow these steps to reset the registry settings and options for Windows Installer.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type
    msiexec /unregister
    and then click OK.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type
    msiexec /regserver
    and then click OK
    *Note: there is a space between the c and the /
    If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
    Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
    Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplaye​r/downloads.html
    Perform a clean boot > How to perform a clean boot in Windows
    Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
    Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
    - Image source
    Now you can go ahead and download and install the software here >
    HP Officejet Pro Full Feature Software and Driver
    If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Please let me know if this was successful! I will watch for your reply.
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Presario CQ61 - Boot Device not found, Hard dis not exist

    Hi i bought my presario CQ61-405AX 2nd hand roughly a year ago and it was almost new, my laptop was running fine, and then it froze, and so i had to turn it off, after i waited 30min for it to unfreeze, it now, when i boot it up, appears with a black screen, with the error
    "Boot Device Not Found
    Pleae install a operating system on your hard disk
    F2 system diagnostiscs" 
    I went onto hp support and followed the prompts until it did a hard disk test and the error, "Hard Disk Not Exist" appeared
    I have no idea how to fix it, i am running Windows 7 home premium, and i fear i may have to buy another hard drive
    Thank's in advance
    This question was solved.
    View Solution.

    Hi,
    The most likely explanation is that your Hard Drive has failed and will need to be replaced, however as a further test, try the following.
    1.  Create a bootable Ubuntu CD - a guide on creating an Ubuntu CD and the download can be found Here.
    2.  When created, follow the guide on the link below to Try Ubuntu.
    http://www.ubuntu.com/download/help/try-ubuntu-before-you-install
    The 'Try Ubuntu' option runs the OS from the CD without the need to install on your HDD.  If this runs Ok ( it will be slow running from a CD ), this would tend to confirm that the problem is with the HDD.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Boot device not found. "Hard disk not exist". windows not booting

    Product: HP G72-110SA
    OS: Win7
    two days ago, I was installing updates on my computer and when it was about to restart, it froze. After waiting for 10 minutes, I had to turn it off by pressing the off button. From then on, the computer turns on but shows a message "Boot device not found".
    I have tried all the BIOS tests that I could find on the net for the hard disk, eg: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443465&tmp_task=solveCategory&cc=uk&dlc=en&la...
    This gives me a "Hard disk not exist" error. I tried resetting the BIOS, that didn't work. I tried taking out and putting back in the battery, the memory and the hard disk. Still no luck.
    I then booted ubuntu from cd on the computer. It works just fine, including the internet etc EXCEPT the HDD is still not detected.
    I had some pretty important stuff and no back up, so would appreciate if someone can help me get back the data. If not, even if I know its just a HDD failure and not a motherboard/BIOS problem, it will be a relief as its probably fixable.
    Thanks

    Hi there ,
    Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I would be happy to assist you. As there are many models of HP Notebooks, I would need the model number. (How Do I Find My Model Number or Product Number?) When I went to www.hp.com/go/techcenter/startup, it gave me documentation and troubleshooting steps to follow. One of the documents it provided is called Hard Disk Error Displays before the Computer Starts. NOTE: I recommend at this point you make an immediate backup of all important data and files. Here are instructions on how to Backing Up Your Files (Windows 8). Please follow the troubleshooting steps provided, re-post with the results of the troubleshooting in detail. Thank you.

  • Boot device not found, hard disk not exist.... does that mean my computer is dead?

    Suspecting that Im in a world of hurt here. I tried turning on my computer and it says "boot device not found" - run in test failed... when I hit F4 and run a hard disk test it says "hard disk not exist". The memory test passes, but under the boot device not found it says in blue "please install an operating system on your hard disk"... and to make matters worse it's making some funny noises when it tries to boot.
    Is there any hope at all that this computer will work again? Is there any chance that any of the things I had on my hard disk can be recovered?
    This question was solved.
    View Solution.

    You're very welcome, Jonathan.
    dv5 still isn't enough info for me to provide the service manual (in case there are differerent ones for the different dv5 models).
    However here is the link to the service manual I randomly pulled.
    http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01550108/c01550108.pdf
    Assume it is safe to say all dv5 models come with SATA notebook drives.
    So, if you want to spring for $15, you can get this enclosure which apparently has very good reviews.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16817182138
    From what you are describing (noise and stuff), I would say you don't have much of a chance to recover data but that is up to you if you want to try the enclosure or not.
    Here is what I recommend:
    Yank the hard drive, and power on the notebook.
    If the odd noise you heard is gone, then you can pretty much safely assume the drive was the cause, and that replacing the drive, and reinstalling the operating system will solve the issue.
    If the noise is still there, then there could be another issue, and it might be risky throwing good money after bad.
    Paul

  • Re: Satellite L50-B05D can't load Win 8.1 - bootable device not found

    Hi
    I have a Satellite L50-B05D and I recently downloaded the bios update and I applied it to my system. When I did it said that it contained the update already. After being on the laptop for a while, I closed the lid and it turnt off. When I turnt it back on Windows wouldn't load up and a message of bootable device not found occured.
    Any help is appreciated
    Thanks

    Did you check the HDD status on the first BIOS page?
    If HDD is OK, the first BIOS page should provide the info about the connected HDD (HDD name)
    At the other hand the HDD might be faulty if its not listed on the first BIOS page.

Maybe you are looking for

  • Error enabling "Mail, Contacts, Calendars, and Tasks with Outlook" in iCloud 3.0  Control Panel

    Unable to enable option "Mail, Contacts, Calendars, and Tasks with Outlook" under iCloud 3.0  Control Panel. Get following error when clicking checkbox to enable it under iCloud 3.0 Control Panel. "Setup can't continue because Outlook isn't configure

  • PO Creation error after processing bid invitation

    Hi Guys, I need small help from you. I have created one bid invitation with out shopping cart. I had processed the bid invitation. Few vendors have submitted their bids. Purchaser had accepted those bid and approver had approved those bids. Now I hav

  • Profile Picture Quality (Low) How to fix?

    Hi Skype Team, Is there a way I can make my profile picture hd quality size for the xbox one? What Resolution of picture would I need for it to look full quality on my Xbox One? Thank-you, Shawn

  • HTML Code

    I am learning to write code and am starting with HTML.  When writing in TextEdit and opening up a brower, why does it continue to show the HTML code.  Also, I am saving it correctly and putting the correct opening and closing tags.

  • Drop Zone Opacity?

    I popped a movie into a Vintage Vinyl theme menu page drop zone -- but the presets in he drop zone make it too difficult to see the movie. Is it possible to make the movie more opaque? Or is this unchangeable? Thanks