Setup solution monitoring

Hi all
I am hvaing a starnge issue while doing the sytem monitoring set up. I have included the system in smsy and assigned the logical component as well.These logical components are assigned to the solution which i have created in DSWP. But now i am not able to find the setup system monitoring option in operation set up. I dont have an any idea about this.
Thereby i deleted hte system and again recreated logical componenet then assigned to the solution well. But this also not worked out for me.
I have completed all the basic settings configuration in SPro and genreated the RFC destionation with required roles also(s_rfcacl). everything working fine. but i am unable to find the root cause and solution.
Anyone have any idea please do suggest me.
Regards
Vijay

Exactly!
In transaction SMSY switch to your solutions. Open the solution in which the new system is located.
Now Right-Click on the required system and choose "put in solution"
The system should now have a green background and be available.
Edit: I also work with a Solman 7.0 SPS 15. You should be able to add the system to the solution. Important is, that you try right-clicking on the system in the opend solution view in smsy
Regards
Benjamin
Edited by: Benjamin Ziegler on Sep 26, 2008 12:13 PM

Similar Messages

Setup Solution Monitoring in Solution Manager 3.2

Hi,
we want to setup the System Monitoring with transaction SOLUTION_MANAGER. We followed shortcut "Operations Setup" and chose Solution "Monitoring->System Monitoring".
There should be a button "Setup System Monitoring" that is missing!
Any idea how to make it appear?

Steve,
Please give me your email address, I will send you the screen-shot? if you do not want to post the email address here, please send me a test mail to [email protected], I will send you the screen shot.
For your questions:
Do you see the monitoring graphic (the box with the system name in it)?
No, I do not see that.
Do you see the Alert Overview button?
Yes, I could see that button.
If so, does it show any alerts when you click it?
when I click on that. All I See a white empty space.
Kumar

Setup Central System Administratin and Setup System Monitoring grayed out

When trying to setup Central Sytem Administration and System Monitoring via SOLUTION_MANAGER.>Operations Setup->Solution Monitoring->Setup Central System Administration (or Setup System Monitoring). The link does not work. However, Setup Earlywatch Alert link works (in Operations Setup->Solution Monitoring->Setup Earlywatch Alert).
We have just brought SolMan 4.0 up to SolMan 7.0 (applied support packs up to 16). I am not sure if I am missing a step to activate this functionality; or if perhaps I have an authorization issue. I have been through the Security Guid for SAP Solution Manager 7.0 as of SP16, and have reviewed note 834534 and been assigned authorizations accordingly....with one exception: In note 834534, page 4, it states that the configuration user should have SAP_ALL. However, I am getting push-back from IT Governance and my request for SAP_ALL is being rejected.
We have installed software components, in particular ST (Release 400, level 17); ST-SER (700_2008_1, Level 004; and ST-PI (2005_1_700 Level 18); of which I believe ST-SER is key.
Has anyone encountered this issue?

Hi,
Yes, This could be an authorization issue.
You are able to Setup Early Watch Alert because you may have the role
SAP_SETUP_DSWP_EWA (full authorization for EarlyWatch Alert setup).
Assign these roles, you wil be able to setup System Monitoring and Administration.
1. SAP_SV_SOLUTION_MANAGER (full authorization for all sessions)
2. SAP_SETUP_DSWP (full authorization for all setup sessions)
3. SAP_SETUP_DSWP_SM (full authorization for System Monitoring setup)
4. SAP_SETUP_DSWP_CSA (full authorization for Central System Administration setup)
5. SAP_SETUP_DSWP_SLR (full authorization for Service Level Report setup)
Also check these roles:
SAP_OP_DSWP (full authorization for all Operations sessions)
SAP_OP_DSWP_EWA (full authorization for EarlyWatch Alert operations)
SAP_OP_DSWP_SM (full authorization for System Monitoring Operations)
SAP_OP_DSWP_CSA (full authorization for Central System Administration operations)
SAP_OP_DSWP_SLR (full authorization for Service Level Report Operations)
This is the authorization object D_SOL_VIEW used in these roles.
Regards,
Sanjai

'Setup System Monitoring' option is disabled in solution manager

Hello,
I am trying to setup system monitoring for different systems in solution manager but the 'Setup System Monitoring' is disabled.
In solman I go to Solution_manager --> Operations Setup --> on the right side pane 'Setup System Monitoring' is disabled. How can you change this to change mode so that you can configure monitoring for different systems? Any idea, please help.
Thank you in advance.
Sameer
Edited by: Sameer Pant on Mar 19, 2011 1:07 AM

Hi Lakshmi,
But when i right click on the qualifier
No u hv to right click on a field to which Compound field is mapped ( Ur Main Table Field)
Right Click on Compound field & choose option Set Qualified Update.
New Links: Create
Existing Links: Update (All Mapped Qualifiers)
Thanks,
Maheshwari

Solution Manager Setup System Monitoring DB Administrating Alerts

Greetings experts
Can someone please explain how I can get "DB Administrating Alerts" to display in Solution Manager.
Satellite system (FSD) database MTE's are all active (RZ20).
Tcode: DSWP / tab:Solution Monitoring / tab:System Monitoring /
Service: Setup System Monitoring
Tree:
Setup System Monitoring
                       +--> SAP System FSD 1320011126
                                                         +--> Database FSD-DATABASE
|
                                                                                +--> Administrating DB FSD-DATABASE (DB2 6000)
Issue: DB Administrating Alerts do not display.
*Solution Manager 7.01 SP3 / DB2 09.05.0002 / AIX5.3
Regards
Peter Babbington

HI
1.Do i need to configure the CCMS_OnAlert_Email, for every alert that you have, in the satellite system?
Best thing I would say is to copy method ( RZ21 --> Method --> Method definition )CCMS_OnAlert_Email to Z_CCMS_OnAlert_Email in Solman and assign this auto reaction to MTE class of satellite systems.
2. How do i configure this out of solution manager, and bypassing the satellite system?
You have to install/configure sapccm4x( for monitoring abap ) on satellite systems by giving details about Solution manager. Then the alert will be sent to Solution manager from satellite system and the configured auto reaction will send mails .
Also go through the links
http://service.sap.com/moniotring
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
http://service.sap.com/rkt --> Solution manager --> Solman Manager < rel > --> Technology Consultants and System Administrator
Thanks
Prince Jose

How to setup system monitoring of EP 7 to Solution Manger 7.0

Hi Experts,
I need help for configuring EP 7 (only JAVA engine) for system to Solution Manger 7.0. IF anyone of you have steps or config guide pls help me ???

Hi Vikas,
In general, system monitoring in SAP Solution Manager use CCMS as the data supplier, which means that, you need to configure CCMS alert infrastructure for your EP system.
General steps:
1. Configure solution manager or other ABAP system as the CEN (central) system as the CCMS infrastructure.
2. Install SAPCCMSR agent (which is part of CCMS Agent), and connect the agent to CEN system
3. Setup system monitoring in Solution Manager
For more information, you can access the help portal of SAP.
Hope that helps.
Thanks, Jett

What is the diff of Solution monitoring and E2E Root cause analysis

Hi,
I want to know what is the different for Solution Manager Solution Monitoring and End to End root cause analysis. Currently we have implemented change management and Implementing and Upgrading SAP Solutions, if i would like to explore the solution monitoring, and end to end root cause analysis, what is the steps of configuration i need?
if i would like to have a check on the system whether is performing well, or setup the functionality of sending alert when system is having problem, which feature would be better? end of end functionality or Solution Monitoring?
Please advice..
thanks
-Fung

Hi,
If you have PI system in your landscape, I would strongly recommend to upgrade to SP15.
Trace monitoring for PI is to be available from SP17 (Not yet released)
Check [this Link.|http://service.sap.com/e2e].
Hope this solves your problem.
Feel free to revert back.
--Ragu

Solution Monitoring in JAVA Based Components ?

Hello Experts,
I have configured the Solution Monitoring in Solution Manager server with Satelite systems (ECC and CRM systems.) in Abap based Components
1.Earlywatch Alert
2,System Monitroing
3,Central System Administration
4,Service Level report All of them working fine
Now I want to setup all the above setup for Java based Components.
1.Is it possible to setup Solution Monirtoring in Java?.
2. How to configure the above setup?.
3. Is there any simulator or Help files availale?.
Thanks
Thirumal

HI Mayank,
I have followed the below steps.
basic steps for JAVA EWA:
configure solution manager diagnostics tool in solman
install wily interscope manager in solman
install SMD agents in satellite system
install wily agents in satellite system.
make sure about the sp level in satellite system.
The wily files depends on the SP - level
1.Could you tell me how to generate the EWA report for JAVA.
2. Could you give me document/simulator to configure the workcenter
Thanks
Thirumal

Solman 7.0 : setup system monitoring

hi
I am taking an error while I want to configure the system monitoring in solman 7.0
solution monitoring-->sys monitoring --> setup sys monitoring
the CCMS Read Destination status is RED.but I have tested the CCMS Read Dest. by double clicking related section .it is ok.(sm59)so connection is ok .
have you got any idea ?
regards

hi
I have checked auth check via sm59 . it is failed.conn test is ok
the error is like this : "user or pass is not true"
what is your suggestions?
thanks in advance

Setup system monitoring wrong text

Dear all,
After implementing Basis patch SAPKB70011 togather with SAPKITL420, Solution Manager system displays wrong text for Alerts in SOLUTION_MANAGER transaction -> Solution Monitoring-> System monitoring -> Operation setup in Setup system monitoring.
expl: for Setup Monitoring for SAP System... all rows shows the same Spool wait time
for Errors / Administrating of ... all rows shows the same Abap error in update
and every time this text is changed when I execute Setup system monitoring.
Should I implement SAPKITL421, SAPKITL422, and SAPKITL423 and are these patches connected with SAPKB70012, SAPKB70013, .. ? Is it necesary when implementing SAPKITL421 to be togather with SAPKB70012 and equivalent, because when I tried to implement SAPKB70011 alone it shows that there is a conflict with the add-on SAPKITL420 and muste be also implemented.
Thank you in advance.
Best regards,
Ruzica

Hello,
Does anyone knows sometinhg about the connection between SAPKITL- and basis patches SAPKB700?
If I need to implement SAPKITL--- patches should I also implement Basis patches?
Regards,
Ruzica

Setup System Monitoring

Hello,
I am trying to setup system monitoring for different systems in solution manager but the 'Setup System Monitoring' is disabled.
In solman I go to Solution_manager --> Operations Setup --> on the right side pane 'Setup System Monitoring' is disabled. How can you change this to change mode so that you can configure monitoring for different systems? Any idea, please help.
Thank you in advance.

Hello,
If your System Monitoring seems disabled, have you performed the IMG activities in transaction SPRO for system monitoring?
SPRO > SAP Solution Manager > Scenario-Specific Settings > System Monitoring
If you have not performed these activities, you will need to....and there is Requirements and Prerequisite documentation once you navigate there.
If this is done, System Monitoring should not be disabled. If you have not defined the systems in SMSY or added them to a solution you will not be able to setup monitoring, but it should nto be disabled, just have nothing to do.
So I would start with the SPRO activities and check the Requirements and Prerequisite have been met and the listed notes applied (949293 and 420213). If this has been done, then make sure you have systems in your solution and if they are not production systems, then you must manually set the status to "Put in Solution" in the solution to be able to use them in system monitoring.
It sounds like your IMG activities in SPRO have not been done.
REgards,
Paul

Setup system monitoring in dswp

Hi,
One of my ecc qa system in not coming in setup system monitoring of dswp. I have included this ecc qa satelite system in smsy and MOPz is working fine for that system. But it is not coming in setup system monitioring. Actually I want to administer the systems centrally from solman.
I am able to get the ecc dev system in set system monitoring.
Regards,
Sudip

Hi,
we should create one logical comp for one product systems of Dev,qua,prd ( For ERP dev,qua,prd 1 logical comp, for PI dev,qua,prd 1 logical comp)
regarding your solution monitoring thing, have you assigned the logical component to your solution?chk the below
[https://websmp101.sap-ag.de/sapidb/011000358700001873212008E|https://websmp101.sap-ag.de/sapidb/011000358700001873212008E]
For your auto fill of created by,have you created BP for curresponding users in solman? and define the "Partner Determination Procedure" for the reporter as "User".(remove the old one as 'SAP Service : Determination via IBase/Ind. Object for Ref. Object Set' and set to user)
Please check and update
Thanks,
Jansi

Setup System Monitoring -- How to transfer Information J2EE

Hi Experts,
I got an issue trying to transfer information of satellite system (J2EE) to Solution Manager ->Operation Setup->Setup System Monitoring
I installed the ccmsr agent and tx RZ20 shows the information of the alerts, but I can see it in Setup System Monitoring.
On the other hand I added the systems in SMSY.
Regards.

In tx rz20 we have to copy the information of each MTE and select properties, then paste that in the third row (agent name) of the alert and save.

Solution monitoring of Enterprise portal

Dear Team,
Is solution monitoring of Portal possible through solution manager ,is alert based monitoring of portal possible through solution manager, can anyone give me the steps involved in this ,can CCMS agents be installed on the enterprise portal,please let me know the steps involved in system monitoring of portal.
regards
Praveen

Hi,
Guides
Setting Up your Central Monitoring [original link is broken]
Notes
987835 - How to define Solutions in SMSY for Diagnostics
976054 - Availability of EWA for Non ABAP components
Prerequisites
The SAP EarlyWatch Alert is available for:
SAP systems based on ABAP stack of SAP Netweaver or SAP WebAS
SAP R/3 (minimum release 3.1H)
The Java stack of SAP Netweaver components with a J2EE Engine 6.40 or above (requires ST-SER 700 2007 1 or above on the Solution Manager)
The main prerequisites for using SAP EarlyWatch Alert are:
A remote connection between your SAP component and your SAP Solution Manager
On a ABAP stack system implement SAP Note 69455, run report RTCCTOOL and follow instructions.
For a Java stack system or a CRM system: setup of Solution Manager Diagnostics. For Java SAP Note 976054 describes the prerequisites.
The EarlyWatch Alert content is shipped on the Solution Manager with software component ST-SER u2018SAP Solution Manager Service Toolsu2019 and on the satelite systems (ABAP) with software components ST-PI u2018SAP Solution Tools Plug-Inu2019 and ST/A-PI u2018Application Servicetoolsu2019.
Chk Pdf
https://websmp201.sap-ag.de/~sapidb/011000358700002009362008E.pdf
https://websmp201.sap-ag.de/~sapdownload/011000358700000589032005K/EWA_Overview.pdf
https://websmp201.sap-ag.de/~sapdownload/011000358700000250462008E/Sample_Report_Java_1_2.pdf
https://websmp201.sap-ag.de/~sapdownload/011000358700000398622009E/ReportEWAJavav2_0.pdf
https://websmp201.sap-ag.de/~sapdownload/011000358700004161302004E/EWA_Sampler_072005.pdf
/people/federico.babelis2/blog/2006/04/25/system-monitoring-configuration-guide-for-dummies
Hope it solves ur problem
Regards
Prakhar

Central system administration (CSA) in solution monitoring

Hello,
I want to configure my solution manager for central system administration (CSA) which is a service provided under solution monitoring of transaction dswp.
I couldnt find any documents for this configuration.
Could you please help me out..
Regards,
Gurudath Pai

Hi Gurudath,
If you have an s-user id, step-by-step tutor files with screenshots are available at
https://service.sap.com/rkt-solman > Solution Manager > Solution Manager 7 > Technology Consultant & System Administrator > System Monitoring, Administration
Before configuring CSA, you have to:
1. Perform basic settings for Solman (use wizard based approach)
2. Setup the system landscape
3. Create solution
4. Now you can configure CSA
Revert if you need clarifications
Prasad

Setup solution monitoring

Similar Messages

Maybe you are looking for