Setup SSD and hard drive combo on 27" iMac?

I have a new 27” iMac with an SSD drive and a second 1TB drive. Somewhere I think I heard reference to arranging them so they appeared as a single drive on the desktop. Is this Tue? Or am I dreaming?I see the advantage in putting the OS and applications on the SSD and all else on the other drive, but is there an article that describes how to do it? Thank you.

Hi Woglesby,
Yes, it is possible to move your system and applications to the SSD.
If you are running from the HD, the procedure is to install OSX Snow Leopard on your SSD.
Boot from the SSD, create an temporary and empty user account, migrate your settings and applications using Migration Assistant. Leave your User Account with all the data on the internal HD.
Change the path to your User Account on the internal HD in System Preferences as above.
Reboot and you should be on your way. You can leave the system folder and applications on the internal HD where they are if space is not a consideration.
Best wishes,
Sam.

Similar Messages

I have formatted my SSD and hard drive.... I am running a clean install from disk of 8.1 pro. I cannot determine if it is a compatibility

issue or hardware issue. I had run a memory test and scan disk for bad sectors from the bios. As administrator, I enabled automount in diskpart to allow windows to assign a drive name.
From the bios, I can see both drives and only the ssd. I have not pinpointed when the harddisk is unmounted. It is formatted as NTFS. I can hear it unmount either during boot or upon waking from sleep mode. The bios sees no bad sectors nor does windows.
However, when I had the intel compatibility software installed, my hard drive never mounted. I did a restart and inorder for windows to see my hard drive. I disabled the intel software for the 4th gen i7 processor. This problem is happening less often. I do
not think I have solved the problem. Intel or Windows... I think a bit of both.
If there is a software patch, please guide me to it. I am in school and use my laptop ALL the time. I believe it is a compatibility issue. I have attached this from searching intel's site for downloads and windows is up to date.
I am quite concerned because I can hear my harddrive unmount. It is labeled as healthy NTFS partition. I have checked for hidden volumes and done everything I know to do to check the integrity of the hardware as administrator. I have searched microsofts
libraries and forums and have done everything I can find as suggestions.
I have checked for malware, viruses, etc. My only clue this is going to happen is the hard disk spins up and I hear the fan, then I hear it unmount the drive. Of course, after unmounted there are other issues which I have ruled out as the cause of the problem.
Basically, I am experiencing a lack of swap space after my hard drive unmounts.
Any suggestions, are welcome! I would really like to know if this is a known windows issue. I should not have to disable intel's processor software. I paid for the features of the i7 and would like to utilise the processor.

Hi,
According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
Roger Lu
TechNet Community Support

IMac with SSD and Hard drive very slow startup time

I have a new mid 2011 iMac with a 250gb SSD drive and a 2TB drive. All are from Apple as BTO options. When I first used the iMac my typical startup time from the hardware check chime to desktop was typically 12 seconds. Something, somehow has been changed because now it takes over one minute to boot up from the SSD. After the chime I hear the fans running and also the 2tb drive. After about 20 seconds I hear the hard drive spin down and then after another 20 seconds it starts up again. Once it starts up the boot up sequences contiunes and returns to the desktop. After this the iMac perfprms as normal. I have tried running disk utility from the recovery partition. I have also reinstalled Lion as well from the recovery partition and neither of these change the outcome.
When I first got the iMac I used time machine to restore from a previous machine into the 2tb partition and then went into advanced options in System preferences>Users&Groups to point to my home folder on the 2Tb drive rather than the default one on the SSD. That was working fine until I discovered software problems with both Preview and Textedit where they would not start up with this arangement. I then repointed my home folder to the default one on the SSD which cured this issue with these programmes leaving my data remaining on the 2Tb drive. Since doing this I have had the one minute boot up problem.
Can anyone offer any advice as to how I may overcome this problem and get my iMac back to starting up in twelve seconds from the SSD as it did before. Any help would be appreciated on this topic.
Thanks.

Where do you maintain your Home folder - on the SSD or on the HDD?
If you want to do a clean install (from scratch) then do the following:
Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
Before you go to the extreme of the above would you do this:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Just in case your system slowness is due to something eating up CPU time. Oh, and if your system is brand new check the upper right corner of the menubar for a "dot" inside the Spotlight glass. This means Spotlight is indexing the drive. Until it finishes your system will be quite sluggish.

My hard drive crashed on my Imac 24" 2009, i put in a new hard drive 2TB and a SSD drive 240 GB and removed the opticdrive. What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

My hard drive crashed on my Imac 24" 2009, I installed a new hard drive 2TB and a SSD drive 240 GB and removed the optical drive.
What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

Virtually any DVD burner that can connect to your Mac will work. They start at $40 on Amazon.

I need to upgrade my macbook ram and hard drive pls help

Hi all,
I need to upgrade my macbook's RAM and hard drive as after 3 yrs of use it is showing signs of aging.
I am novice in hardware stuff. I am planning on doing it entirely by myself and on tight budget will need to compare the prices across sellers and buy a suitable peice of kit. Please help
Questions:
1 - How to find out which RAm do I need to buy and what is the maximum I can go on my macbook?
2 - How to find which hard drive to buy and what is the maximum my macbook will support?
3 - Can I buy the SSD drive instead of SATA for this macbook?
Some of the specs are listed below:
Hardware Overview:
Model Name:          MacBook
Model Identifier:          MacBook5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MB52.0088.B05
SMC Version (system):          1.38f5
MANY THANKS FOR READING AND REPLYING TO MY POST
[email protected]

Hi Chefjeegar
Yes that screwdriver kit has the #00 phillips screwdriver that you need to access the RAM and hard drive. You'll also need the Torx driver to change the hard drive. http://www.amazon.co.uk/LINDY-Computer-Technician-Precision-Torx/dp/B0000934GO/r ef=sr_1_1?s=computers&ie=UTF8&qid=1348072554&sr=1-1
For a good explanation about RAM look at the page on OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/
In the UK Amazon or eBay might be your best bet for cheap RAM but read the description and reviews carefully. For a little more expensive but with a better warranty is Crucial UK http://www.crucial.com/uk/
A good resource for working on your MacBook is ifixit.com http://www.ifixit.com/Device/MacBook_Core_2_Duo
Is your external hard drive formatted for Mac? To transfer your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html Check that it's set up right by booting up from the external drive. Put the new drive in your MacBook, then format and partition the new drive. Then use Carbon Copy Cloner to transfer your OS back to the new drive.
Yes, you can put an SSD in the MacBook.

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

How do I a setup an external hard drive on my Macbook Pro?

How do I a setup an external hard drive on my Macbook Pro to my primary hard drive for my iTunes library?
I ask this because every time I try to do this it my Mac book pro always wants to use the external hard drive I plug in as a time machine back up rather than my primary hard drive. I figured it would be cheaper and more efficient to use an external hard drive rather than have apple charge me an arm and a leg to replace and upgrade my current hard drive in my Mac book pro.

I responded to this in your duplicate posting at: http://discussions.apple.com/thread.jspa?threadID=2690347
I recommend giving a first post a chance before posting a second time, especially since it may result in a lot of duplication in effort from the people volunteering their time here.

Cheap external dvd+rw and hard drives

I have recently purchsed the most basic model of the macbook, with a 60gb HD and the combo drive, cos i got a good deal on the price for that model only, however, the HD doesnt have enough space for much other than all my music files and i need an external drive, but am having trouble finding a cheap one that is mac compliant. All seem to be PC compatible, same with the dvd rewriters.
can these cheaper models be used with Macbooks? can i download mac os x drivers somewhere? or do i have to pay over the odds for a mac compliant equivalent??
also, any recomendations on cheap dvd+rw and hard drives? and where can i buy them (bearing in mind i am based in the UK)?
now i have bombarded you with questions, i hope what i have said is clear, and apologise or being such a mac novice!
any help would be gratefully received.
thanks

All seem to be PC compatible, same with the dvd rewriters.
Strongly recommend you look for firewire external devices, not USB. Your Mac will see them, and you will be able to initialise the hard drive using Disk Utility. As dvd burner, the same applies, except that you may want to consider third party software for burning.

Memory modules and hard drive not recognized

I removed and reinserted the factory installed Satellite L505D-LS5007 laptop hard drive and memory modules just as practice for installing a hard drive upgrade and an 8GB memory upgrade. The problem is obviously with the memory and not with the hard drive.
After the first practice try, one memory module was recognized. Also for a few seconds after the first practice try, I ran the PC with the battery installed, but no memory installed. I did not look in the User's Guide first to see that I should have removed the battery before removing the memory.
Now the System Indicator Lights for the HDD Activity and Memory Card Reader do not light up. The PC turns on and the display is solid black with no messages.
Before buying new memory modules, what possible ways might there be to get the PC to recognize the factory installed memory modules and hard drive again?
Solved!
Go to Solution.

When troubleshooting, I always change one variable at a time. I would hate to miss a solution by being in a hurry. In this case, you may have damaged either the RAM or the RAM slot. I would stick with the Toshiba specifications for the RAM, making sure it is the correct size, speed and type recommended. I also recommend that when you replace the RAM that both modules be from the same manufacturer, size, and specification. Try one RAM module in one slot and then the other. And then try both RAM modules in both slots. After the testing you should be able to figure if this is a RAM problem or a RAM slot problem.
In the case of hard drives, the real test is whether or not the Bios sees the hard drive. If the Bios doesn't see the hard drive, it's not going to work. The Bios should see the hard drive whether or not the hard drive is partitioned, formatted or has data on it. My experience has been that many Toshiba laptops will work fine with larger capacity hard drives provided they are the same speed in RPMs, have the same interfacing connection and physically the same size.
Again, prior to doing any work on your computer, make sure that both the AC power has been disconnected and the battery has been removed. Be careful out there. A blown repair job by a non-Toshiba tech is NOT covered under warranty.

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. i have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done?

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?

As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
http://web.me.com/pondini/Time_Machine/Home.html
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums).

Deleting a song from iTunes library and hard drive on Itunes 11.0

how do i delete a song from iTunes library and hard drive on Itunes 11.0 at the same time.

Hello CleveCo, Inc
And welcome to Apple Discussions!
At some point in time, you may have selected the option to prevent that dialog from appearing again when trying to delete tracks from your library. To reset all of iTunes warning dialogs, click the Edit drop down menu and choose Preferences from the list (on a Mac it is *iTunes -> Preferences* ). When the window pops up, head over to the Advanced tab and click the *Reset Warnings* button. Then quit iTunes and relaunch it. That do the trick for you?
B-rock

How do i use airport as both time machine and hard drive? currently on Yosemite 10.10.1

how do i use my 3TB airport time capsule as both time machine and hard drive? currently on Yosemite 10.10.1.....Many Thanks.

Choose Computer from the Finder's Go menu and double-click it. If needed, use the Connect to Server command to log into it.
(119763)

I had a new hard drive fitted to my imac and restored it from my time machine back when I try to open itunes I get this message "the itunes library extras.itdb file is locked, on a locked disk, or you do not have write permission for this file"

I had a new hard drive fitted to my imac and restored it from my time machine back up on an external hard drive when I try to open itunes I get this message "the itunes library extras.itdb file is locked, on a locked disk, or you do not have write permission for this file"

To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file. Once the file was deleted I was able to open iTunes without difficulty. Note that I am running Windows 8. Hope this helps!

Can time capsule back up an external hard drive attached to my imac and the iMac internal Harddrive

Can time capsule back up an external hard drive attached to my imac and the iMac internal Harddrive

In addition to Kappy's comments, the external drive must be formatted in Mac OS Extended (Journaled) in order for Time Machine to be able to back it up.

New RAM and hard drive won't connect to computer. It's still making the beeping noise. Any ideas?

My computer stopped working and I thought it was my RAM and hard drive so I bought a new one of each of these. However, when I tried turning my computer back on after replacing them, it still made the beeping noise. I am clueless. Does anyone know what could be the cause and how to fix it. Thanks!!

What type of beeping noise?
What machine specs? What type of RAM and HDD?
Power On Self-Test Beep Definition - Part 2 - Support - Apple

Setup SSD and hard drive combo on 27" iMac?

Similar Messages

Maybe you are looking for