Setup Sync on Mac has Continue button grayed out

Setting up sync on my Mac OSX 10.6, I already have a sync account. I enter the email for the sync account, and password, yet the Continue button remains grayed out.
I have confirmed by logging in on the web that I am using the right credentials.
what trick enables the continue button?

Hi!
I'm assuming that you are in the window that I'm attaching in the screenshot.
You need to add the Recovery Key in the third box. If you don't have it you need to click on "I've lost my other device" and follow the instructions.
If this is not the window that you are using, you will need to go there by clicking "I have an Account" and press "I don't have the device with me" at the bottom of the 3 boxes with the code.

Similar Messages

System Profiler won't launch/ About this Mac more info button grayed out

Panther 10.3.9 on 1.25 imac G4. I recently restored this mac to get ready to sell it and after the restore and Panther upgrade (from system discs) System Profiler no longer launches. I have run disk utility to repair permissions. The area in the dock opens up for the System Profiler icon but it just shuts right back down. I can't launch it directly from utilities and the "more info" button on the about this mac menu is grayed out. Anyone have a solution? Thanks!

Hi cornelius,
I posted the link to the thread due to the fact that there were a number of suggestions of troubleshooting the user could try to resolve their issue.
One was the standard Repair Disk/Repair Permissions, one was to reset PRAM (not sure why that was suggested in this particular case), and one was to check to see if it could be a font issue and one was to test with a new user account to see if the problem was system wide. And one was for reinstalling System Profiler by using Pacifist.
The OP in that thread did not post back to indicate if any of the suggestions helped but I thought that the OP here might benefit.
I wasn't suggesting anything specific as I personally have never had the problem but I thought those suggestions might help the OP.
Or am I misunderstanding what you are asking?
best as always,
littleshoulders

Artwork Button Grayed-Out

I have some MP3s of an unknown sample rate and different bit depths. I would like to add artwork to these files, but iTunes has the artwork button grayed-out. I can convert the MP3s to AAC, but the quality will suffer, and I don't have the original uncompressed audio to start with.
Is there a solution to this?
Mac Pro 2.66 GHz Quad Xeon Mac OS X (10.4.7) 3 GB RAM

If you do a Get Info on the MP3 in iTunes and select the Artwork tab can you add there?
If you Ctrl Click the track in iTunes and Show in Finder then do another Get Info are the permissions set correctly?
Regards,
Colin R.

Cannot Approve Journal Batch (Button grayed out in More Actions screen)

Cannot Approve Journal Batch (Button grayed out in More Actions screen)
The Journal Batch Approval notification goes to one or more approvers but when any approver opens the journal and tries to approve, the approve batch button is greyed out and nobody can approve the Journal batch. The approver has every authority amount and other wise.
Any idea what might be wrong? Do I need to setup something in Preference pages etc.,?
Thanks for your help.
Harish Amble
[email protected]

Are you looking at the Workflow Notifications page or GL page. Please give me the navigation used to reach the page. Typically in workflow notification details page, the Response buttons are either displayed or hidden based on whether the notification has a Result Type attached or not. I don't think they are greyed out based on any rule.
Workflow notifications does not check the approval authority by itself. Ann appropriate workflow notification with right content and result type should be sent based on the approval authority checked in a previous function activity.
Thanks
Vijay

Address Book "Edit" button grayed out...unable to edit

Had to edit a contact's info and was surprised to find the Edit button grayed out, not allowing me to click it. Repairing permissions has not helped.

V.K., thanks for the suggestion. Unfortunately, before I got to try it, I re-launched Address Book one more time and found it will no longer launch. Its Dock icon just keeps bouncing. Not only that, but I've also found that iCal and Mail will no longer launch, either. The iCal calendar pane and the Mail main window open, but the beach ball spins forever. I've never seen this before. Any ideas?
I tried a different account on the same computer. No problems there.

Why Are My Text Align Buttons Grayed Out?

My users are unable to center text when edited pages in CS3 and CS4. The standard paragraph alignment buttons are grayed out.
All the users of my site have Admin role, and I have set up the role to allow unrestricted editing. And "Allow Users to Apply Styles"... At screenshot of some of my settings is attached. I don't see why Contribute is not allowing this basic element to work.
Why Are My Text Align Buttons Grayed Out?
Any help would be greatly appreciated.

I experienced the very same issue, but found an interesting quick-fix that worked for us.
Several of my webpage content managers reported that they could not change the text alignment in pages created using Dreamweaver nested templates. We use nested editable regions in order to restrict portions of the pages (i.e. banners and navigation menus) from being edited.
I found that Contribute CS4 could realign text in some parts of the affected pages, but not others.
Further exam revealed that Contribute could change the alignment on any text that was inside a table on those pages. If I inserted a table and then cut-n-pasted the problem text into the table, the text lost its style/formatting, but it could then have its alignment changed.
Any text not inside a table could not have the alignment changed by Contribute and changing its style/formatting made no difference.
One note though: It was interesting that after pasting the text into a table, if I selected a chunk of text, the alignment buttons grayed out again. However, if I simply clicked on the line of text (did not select it), the buttons remained active and the text alignment could be changed.
I don't know why it is happening. The nested regions were working fine, or so I thought, until recently.
The above is a quick-fix and got my page content managers back online, but I'm still searching for a long-term solution if anyone has one.
Good luck...
GaryC3706

ICloud email won't send (it tries to send and then freezes, send button grayed out)

I can recieve email just fine. I can draft an email just fine. But it won't send. When I hit the send button, the email window goes away and a message box appears and disappears so fast I can't read it. The email window reapears with the "send" button grayed out. Once this happens, I can't close the email window. I have to quit mail. When I open mail back up, the email will still be there and I can close it. The send button is no longer grayed out, but if I hit send, the same thing happens (i.e., screen flashes and the send button is grayed out).
I've tried deleting the acouunt and reforming it. Didn't help. I checked to see that my outgoing server is "iCloud" and that it send on port 993 and the SSL check box is checked.
Any ideas?

I'm having the exact same problem on one of my Macs but no the other.
Did you ever get this resolved?

Adobe Acrobat 8 Pro Save button grayed out

I have a user with Windows 7 with a fresh install of Adobe acrobat 8 pro and everytime you open a pdf and type in it the Save button is grayed out. You can go to Save file as but why is the Save button grayed out? I have ran updates and even removed it again and reinstalled still the Save button is grayed out? I even created a new pdf with just test word in it and saved it to desktop the button was still grayed out when i reopened it.

Only the fully updated Acrobat 9 and Acrobat X products support use under Windows 7.
Adobe products and operating system compatibility

Join Button Grayed Out

My iPad connects with no problem at home on my Time Capsule and Airport Extreme Routers. At my office, I can't even find out if it will connect or not, because when I select the network to join it, as soon as I type in a password, the JOIN button grays out making it impossible to connect. On hold now with Apple for 20 minutes and they are scratching their heads. Not a good sign for a device I am otherwise crazy about. Anyone else got this issue? For what its worth, its a Linksys Router at the office.

Oh heck, nevermind. Turns out I was entering the wrong password. DOH! Nothing to see here, move along.

Data source active/inactive button grayed out in LBWE

Hello,
When I was activating the Logistics datasource in LBWE, my data source status became red and the Active/Inactive button grayed out? how can I make this data source active again?
Thanks,
KK

Hi Kumar,
The status will become Red and Active/Inactive is disable due to Extract structure activated but data source is not maintained. This happens once you change the extract structure to Include additional fields. Please do the below step:
in LBWE, Click on Data source (Technical name of your data source beside maintainance) and you will get maintainance screen, change if you want some thing or else leave as it is and save, Now the status for data source in LBWE will become yellow and activate/deactivate will enable.
Regards,
Kams

Unable to rotate raw images in bridge, rotate buttons grayed out?

Unable to rotate raw images in bridge, rotate buttons grayed out?
Bridge 5.0.2.4.

There is an ignore EXIF setting Preferences. I can't remember if that is Bridge or Photoshop, but IIRC it is for DNG files.
Right. Check Photosho > Preferences > File handling and make sure 'Ignore EXIF tag, is not checked. I think that might do it, so long as it refers to sidecare files, because only RAW files would have one.

'sign in' button grayed out when adding account-email address has five letters after the '.'

so i have this email account that uses a peculiar sever name with five letters after the '.' ie: [email protected] the thing is i can set up the server and user name and pass for the account so that it connects and syncs fine. the only problem is that i have to leave out one of the letters at the end of the address when setting it up or webOs will not let me sign in (the button is grayed out).
so to get around it, i just left off one of the letters at the end ([email protected]). this let me set up the account BUT i can't send emails because the server requires that all messages come from the internal accounts with all five leters in the suffix ([email protected]) and since my address is missing a letter it won't accept and out going emails.
Is there any way i can get around this? either by disabling the prevention of entering in 5 letters after the '.' or by going somewhere to add the letter back in after the fact. Please help!!! Thanks
Post relates to: Pre p100eww (Sprint)

The problem is where you enter your address and password for ESMTP (outgoing authentication)? Many mail clients let you check a box to use the same username and password that you use to retrieve email. I gather that isn't an option in webOS?

Compressor has the submit button grayed-out

I've uninstalled the complete FCS-3 using FCS remover for the 3rd time but the "submit" button is still grayed-out and the local cluster does not show up. (all it says is "none" & "other")
What is wrong? Do I have to resort to wiping the entire OS and re-install everything to get compressor to do its job?

I've never encountered this particular issue, but if reinstalls via FCS Remover aren't working, then I would tend to believe that there is some other underlying problems with your system. A clean system install would be my next recommendation.

Issues with 'next' and 'previous' buttons grayed out in 'Preview'

First off.. HELLO MAC FORUM!! Woo hoo!!
I just got a MacBook Pro and I'm LOVING it.. I'm having one small issue that I can't find help with after googling.. when I'm in 'Preview' viewing pics my 'next' and 'previous' buttons are grayed out and I've looked in preferences and don't see where to change this so that I can click through the pics in a folder.. it's pretty annoying and there absolutely HAS to be a way to get this going.. help please!!

WHEN 'NEXT'.
      PERFORM scroll_end.
WHEN 'PREVIOUS'.
     PERFORM scroll_left.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_7100 INPUT
*&      Form scroll_end
      text
     -->RT_COLUMNS text
form scroll_end tables rt_columns type kkblo_t_columns.
ENDFORM.
*&      Form scroll_left
      text
     -->RT_COLUMNS text
form scroll_left tables rt_columns type kkblo_t_columns.
ENDFORM.
i've tried this....the previous error gone..but now i have another error said " the type kkblo_t_columns. is unknown ".
really exhausting :P

Can't download: Subscribe and Get Episode buttons grayed out

I have an iPhone. I sync my contact/calendar etc info on 2 different computers: my home computer and my work laptop. I had never used Podcasts before.
A few days ago, while at work, somebody showed me a podcast, and I hit the subscribe button, not thinking much of it since it is free content. Then, when I got home, I realized I'd rather manage Podcasts from my primary personal computer. However, now all "Subscribe" and "Get Episode" buttons are grayed out! I deleted the Podcast from my work laptop, that didn't help. I reinstalled iTunes, even into a different directory, that didn't help.
I'm at a loss. Even though it is free content I can only play Podcasts on one computer? And can't change which one that is?
I have a ticket open with support but so far have only gotten the FAQ pasted into an email to me.
Can anybody help? Have you seen this before?

Just to clarify, on my work laptop I can download Podcasts just fine. However this is a temporary computer, I need to be able to do this on my home computer.
I simply did not realize that downloaded a Podcast once would make it so that's the only computer that can download any Podcasts at all. Is there no way to remove this restriction, change it so this laptop can't and my home computer can instead? De-authorize this computer from Podcast management, basically?
Any ideas at all? iTunes support has been no help, they keep telling me to re-install or to contact the publisher of the Podcast, but this is about ALL Podcasts, it's simply how iTunes works it seems.

Setup Sync on Mac has Continue button grayed out

Similar Messages

Maybe you are looking for