Setup synchronize with address for Sage ACT! showed Runtime Error: Cannot configure the section.
Hello Blackberry Senbai...
As my problem showed as subject line. "When I setup synchronize with address book for Sage ACT! showed Runtime Error: Cannot configure the section."
Setup was stopped from this point.
my system info..
Desktop Manager version is 5.0 downloaded from Blackberry website.
ACT version is 2010.
OS: Window XP Pro with service pack 3
Thank you for your time to review my problem.
Hi and Welcome to the Forums!
Since the version of ACT that you state is not contained in the PIM compatibility matrix, I'm not sure that there is anything to be offerred...
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
hi all, i just updated my iphone 3gs with 5.0 ios version and now i cannot configure the iphone with it because itunes is not recognizing my iphone
Contacts are NOT part of the iTunes backup. If you had read the User Guide when you got your phone, you would have learned that Apple recommends you synch your contacts for safekeeping to your computer (Outlook, Address Book) or a cloud service. Using the phone as your only source of your contacts is foolish as the phone can easily be lost, damaged, stolen, or the data become corrupt.
If you've been using your phone as strongly recommended, your contacts are safe and sound on your computer or cloud service ready to be synched back to your phone. Of course, you should be backing up your computer regularly as well.
If you haven't been doing this, your contacts are likely gone. -
Help! (please I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???
Or If there is any purchased music then you can try to transfer purchases
http://support.apple.com/kb/ht1848
If you're in the US you can reload purchased music
http://support.apple.com/kb/ht2519 -
One of my imported MOV files turns "black" after editing with it for a time and I can't retrieve the images. This has happened three times, only this file. The placeholder is still there. Files are fine on hard drive. What gives? how to stop this? is in final cut pro 10.1.4
-
My time capsule was working and then I added another Macbook pro. TC stopped appearing in Airport Utilities. I have tried resetting TC, I have turned if off and held reset button with pen for >10 secs. I just cannot work out what else to do? I have turned router off and on. Amber light is flashing.
The ethernet says self assigned IP 169.254.67.6
Then the ethernet is not getting an IP from the TC.. there is no connection.
I am not sure where you mean when you say the green LED should be on. Do you mean the TC?
Thanks
In order to help troubleshoot ethernet connections all routers use connectivity leds.. even APPLE.. it has one big LED on the front.. and 4 tiny leds beside each ethernet port. That light has to come on for ethernet to be active.. if you plug an ethernet cable into the port and the light doesn't come on.. then there is no connection.. either the other end isn't plugged in.. or the cable is bad.. or the ethernet port is bad.. something is wrong.
To get access to the TC you need this led to be green.. is it?
If it is green and the WAN is also green.. then I want you to unplug the WAN connection.. the blue wire in the picture.. the port slightly separated from the 3 LAN port.. computer plugged just into LAN port.. no airport turned on.. and press the reset again for 10sec until front led flashes rapidly.. then try and bring up the airport utility again.. assuming the ethernet led is green.
How old and what model is the TC?
The A number from the rubber mat will tell us the model. -
Error: "Cannot access the web server" with BlazeDS Turnkey
Help! I'm new to Flex and BlazeDS and Eclipse. I was trying to setup a Flex Project using a BlazeDS/Tomcat server running from Eclipse on Windows XP per the example in flexbandit.com/archives/55#comment-269 and in (www.infoq.com/articles/blazeds-intro). I am NOT using the Eclipse Flex plug-in. I'm using Flex Builder for the Flex code.
Here's what I've done:
I installed BlazeDS and tested http://localhost:8400 - That worked.
I setup Tomcat in Eclipse. - That seemed to work.
I created a Dynamic Web Project in Eclipse - That seemed to work.
I created the bare-bones BlazeDS Configuration under the Eclipse project and then created a basic HelloWorld java class.
I added the destination in the “remoting-config.xml” file found in the c:/projects/workspace/ReportGenTool/WebContent/WEB-INF/flex” directory:
<destination id="HelloWorld"> <properties> <source>HelloWorld</source> </properties> </destination>
When I started the application server by clicking on the server's green play button in Eclipse and then tried to open localhost:8400/ReportGenTool, I got the 404 error : The requested source (/ReportGenTool/) is not available which according to the instructions is fine.
Next I created a Flex Project, but when I try to validate the new Flex project configuration, it gives me an error "Cannot access the web server. The server may not be running, or the web root folder or root URL may be invalid."
When I validated the server was running after setting up the BlazeDs Turnkey, I saw the BlazeDS page.
Now when I bring up http://localhost:8400 I get:
Directory Listing for /
Apache Tomcat/6.0.14
My eclipse project is named ReportGenTool and I've overwritten the WebContent directory with the META-INF and WEB-INF directories from the BlazeDS installation (C:\blazeds\tomcat\webapps\blazeds). According to Eclipse the server is running.
My Flex project is named ReportGenTool and is located in another directory away from the Eclipse project directory.
My root folder is: C:\Projects\workspace\ReportGenTool\WebContent
Root URL: is http://localhost:8400/ReportGenTool/
Context root is: /ReportGenTool/
Any idea what might be wrong? What didn't I configure that needs to be configured?
Thanks in advance.This is not working because your router has a direct to your web server that is not through the outside interface which is needed for nat to occur, for this to work you need to setup a loopback interface as nat outside and policy route traffic to there for your server traffic
Bu if your server is internal why do you need nat at all? Can you not use bind with views that might be simpler
M
Sent from Cisco Technical Support iPad App -
I had itunes on another laptop which is no longer in use. I have changed my apple id to my email address which has completed fine. I cannot find the itunes I had on my account before that I had on my other laptop. Can you help?
Your music will only be where you put it. It does not magically appear in other places. Copy it from your old computer or your backup copy of your old computer.
If for some reason you have failed to maintain a backup, not good, then you can redownload some itunes purchases in some coutries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
when i finish a file and try to "save for web", i get an error box saying The operation cannot be completed. The system cannot find the path Specified.
What can i do or where do i look?ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what. -
my suddenly no longer works and dosn't show any sign and when i try to make restore for it, iTunes shows me error 4005 and my iPhone does not respond to iTunes
OK, and when you searched for information on iPhone error 4005 what did you find?
-
I recently upgraded to Microsoft 365 Home and use Outlook 2013. The Acrobat PDFMaker Addin worked fine in Office 2010. Now, I get an error message: Not loaded. A runtime error occurred during the loading of the COM Add-in.
I use Adobe Acrobat X Professional.
I have restarted Outlook, restarted my computer, and nothing changes.
Does anyone have a solution?
SteveI do not think that AA X is compatible with the newest versions of OFFICE and such. Your only choice is to print to the Adobe PDF printer or use the MS plugins to create PDFs.
-
I had an app which disables an iPhone to connect to the internet via mobile network. In the meantime I have deleted that app but it still affects my phone. For example iPhone shows that 3G sign on the top (next to the time) but it is unable to open any website. Is there anything I can do about it?
What was the app you are referring to? I'm not aware of anything on the app store that is designed to do that, unless you're talking about an app that was causing a problem...
Was/is your phone jailbroken? -
When I try to download Adobe CreativeCloud with my code I receive this message and cannot succeed the operation.
See the message below and help me to finish this operation and install the soft :
Le pays dans lequel cette carte a été achetée ne coïncide pas avec votre ID Adobe. Essayez de vous connecter avec un autre ID Adobe ou prenez contact avec nous si nécessaire. Contacter le support techniqueJkpakpo please utilize a different web browser or install the Adobe Creative applications through the Creative Cloud Desktop application. You can find more details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
-
i tried to resore my iphone 3GS with itunes but it is showing an error 29 , can anyone help me to sort out this problem
Try to restore get a error 29 - iPhone 3GS - iFixit
See if this helps. -
i have a iphone 4s and its stuck at the apple logo to comes up then fades away and every time i try to restoring with iTunes it gives me a 4013 error i changed the charging port/dock and the battery ive also used a different computer and cable
See: http://support.apple.com/kb/TS3694#USB
However, the most likely reason is your self-repair of a device that is only factory repairable broke something. Note that Apple does not sell replacement parts, so whatever parts you used were not made by Apple's supplier and are of questionable quality. -
I cannot get my icloud email address changed, but I no longer have that email address. So it is sending an email to an address that no longer exists, yet I cannot get it to change to my current email address. WHen I walk through the process, it sends me an "verificaiton email" that DOES NOT have the link in it to verify. UGH
Welcome to the Apple community TMOZINGO.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.
Maybe you are looking for
-
Hello! I have the problem that firefox saves/downloads files to the wrong folder. I have chosen a folder for the download of files and this folder is shown in the "general settings window" (I don't know the English name - i have the Swedish version o
-
TS3988 How do I get the email account that was in icloud?
Hello, my manager handed me his phone off to resolve it and I restored and updated the iphone without knowing who was the account that was set up iCloud, and now I can not activate the phone. How do I get the email account that was in icloud that was
-
I need to loop over query results one at a time (present first row as choice, then second row as choice if they need another, etc.). First of all, I'm having trouble figuring out if I can use sort of a combination query-index cfloop (see attached cod
-
IPhone not restoring, now stuck on Apple logo
I was previously still on 4.1 and I decided to finally upgrade to 4.3.2. I downloaded the newest iTunes and everything seemed to be going normal. After the update was done, I set my phone to restore from back up and went to bed. When I woke up a coup
-
Will CS6 feel at home on my old iMac 24 ?
I purchased the CS6 from CS4 upgrade to meet Adobe's deadline, but I read somewhere that CS6 requires Lion and a minimum of 4Gb of RAM in the system. My iMac with 2.16 MHz Intel core 2 duo is already slow with Photoshop CS4, as it won't make use of m