Setup System Monitoring -- How to transfer Information J2EE

Hi Experts,
I got an issue trying to transfer information of satellite system (J2EE) to Solution Manager ->Operation Setup->Setup System Monitoring
I installed the ccmsr agent and tx RZ20 shows the information of the alerts, but I can see it in Setup System Monitoring.
On the other hand I added the systems in SMSY.
Regards.

In tx rz20 we have to copy the information of each MTE and select properties, then paste that in the third row (agent name) of the alert and save.

Similar Messages

  • How to setup system monitoring of EP 7 to Solution Manger 7.0

    Hi Experts,
    I need help for configuring EP 7 (only JAVA engine) for system to Solution Manger 7.0. IF anyone of you have steps or config guide pls help me ???

    Hi Vikas,
    In general, system monitoring in SAP Solution Manager use CCMS as the data supplier, which means that, you need to configure CCMS alert infrastructure for your EP system.
    General steps:
    1. Configure solution manager or other ABAP system as the CEN (central) system as the CCMS infrastructure.
    2. Install SAPCCMSR agent (which is part of CCMS Agent), and connect the agent to CEN system
    3. Setup system monitoring in Solution Manager
    For more information, you can access the help portal of SAP.
    Hope that helps.
    Thanks, Jett

  • 'Setup System Monitoring' option  is disabled in solution manager

    Hello,
    I am trying to setup system monitoring for different systems in solution manager but the 'Setup System Monitoring' is disabled.
    In solman I go to Solution_manager --> Operations Setup --> on the right side pane 'Setup System Monitoring' is disabled. How can you change this to change mode so that you can configure monitoring for different systems? Any idea, please help.
    Thank you in advance.
    Sameer
    Edited by: Sameer Pant on Mar 19, 2011 1:07 AM

    Hi Lakshmi,
    But when i right click on the qualifier
    No u hv to right click on a field to which Compound field is mapped ( Ur Main Table Field)
    Right Click on Compound field & choose option Set Qualified Update.
    New Links: Create
    Existing Links: Update (All Mapped Qualifiers)
    Thanks,
    Maheshwari

  • Setup System Monitoring

    Hello,
    I am trying to setup system monitoring for different systems in solution manager but the 'Setup System Monitoring' is disabled.
    In solman I go to Solution_manager --> Operations Setup --> on the right side pane 'Setup System Monitoring' is disabled. How can you change this to change mode so that you can configure monitoring for different systems? Any idea, please help.
    Thank you in advance.

    Hello,
    If your System Monitoring seems disabled, have you performed the IMG activities in transaction SPRO for system monitoring?
    SPRO > SAP Solution Manager > Scenario-Specific Settings > System Monitoring
    If you have not performed these activities, you will need to....and there is Requirements and Prerequisite documentation once you navigate there.
    If this is done, System Monitoring should not be disabled. If you have not defined the systems in SMSY or added them to a solution you will not be able to setup monitoring, but it should nto be disabled, just have nothing to do.
    So I would start with the SPRO activities and check the   Requirements and Prerequisite have been met and the listed notes applied (949293 and 420213). If this has been done, then make sure you have systems in your solution and if they are not production systems, then you must manually set the status to "Put in Solution" in the solution to be able to use them in system monitoring.
    It sounds like your IMG activities in SPRO have not been done.
    REgards,
    Paul

  • Solution Manager Setup System Monitoring DB Administrating Alerts

    Greetings experts
    Can someone please explain how I can get "DB Administrating Alerts" to display in Solution Manager.
    Satellite system (FSD) database MTE's are all active (RZ20).
    Tcode: DSWP / tab:Solution Monitoring / tab:System Monitoring /
    Service: Setup System Monitoring
    Tree:
    Setup System Monitoring
                           +-->  SAP System FSD 1320011126
                                                             +-->  Database FSD-DATABASE                                                                               
    |
                                                                                    +-->  Administrating DB FSD-DATABASE (DB2 6000)                                                                               
    Issue: DB Administrating Alerts do not display.
    *Solution Manager 7.01 SP3 / DB2 09.05.0002 / AIX5.3
    Regards
    Peter Babbington

    HI
    1.Do i need to configure the CCMS_OnAlert_Email, for every alert that you have, in the satellite system?
    Best thing I would say is to copy method ( RZ21 --> Method --> Method definition )CCMS_OnAlert_Email to Z_CCMS_OnAlert_Email in Solman and assign this auto reaction to  MTE class of satellite systems.
    2. How do i configure this out of solution manager, and bypassing the satellite system?
    You have to install/configure sapccm4x( for monitoring abap ) on satellite systems by giving details about Solution manager. Then the alert will be sent to Solution manager from satellite system and the configured auto reaction will send mails .
    Also go through the links
    http://service.sap.com/moniotring
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
    http://service.sap.com/rkt --> Solution manager --> Solman Manager < rel > --> Technology Consultants and System Administrator
    Thanks
    Prince Jose

  • How to transfer information from hard drive to new mac

    how to transfer information from external hard drive to new macbookpro

    Have a read here Setting-up a new Mac from an old one, its backups, or a PC
    Stefan

  • How to transfer information from a Samsung Galaxy to my iPhone 5s

    how to transfer information from a Samsung Galaxy to my iPhone 5s

    I'm not sure I understand the distinction your making betweewn "from one mobile to another" and "from one mobile FOR another". If you have music on your Samsung, transfer it to your computer, add it to iTunes and sync it to your computer.
    See this tutorial:
    http://support.apple.com/kb/TI107

  • Setup system monitoring wrong text

    Dear all,
    After implementing Basis patch SAPKB70011 togather with SAPKITL420, Solution Manager system displays wrong text for Alerts in SOLUTION_MANAGER transaction -> Solution Monitoring-> System monitoring -> Operation setup in Setup system monitoring.
    expl: for Setup Monitoring for SAP System...  all rows shows the same Spool wait time
            for Errors / Administrating of ... all rows shows the same Abap error in update
    and every time this text is changed when I execute Setup system monitoring.
    Should I implement SAPKITL421, SAPKITL422, and SAPKITL423 and are these patches connected with SAPKB70012, SAPKB70013, .. ? Is it necesary when implementing SAPKITL421 to be togather with SAPKB70012 and equivalent, because when I tried to implement SAPKB70011 alone it shows that there is a conflict with the add-on SAPKITL420 and muste be also implemented.
    Thank you in advance.
    Best regards,
    Ruzica

    Hello,
    Does anyone knows sometinhg about the connection between SAPKITL- and basis patches SAPKB700?
    If I need to implement SAPKITL--- patches should I also implement Basis patches?
    Regards,
    Ruzica

  • Setup system monitoring in dswp

    Hi,
    One of my ecc qa system in not coming in setup system monitoring of dswp. I have included this ecc qa satelite system in smsy and MOPz is working fine for that system. But it is not coming in setup system monitioring. Actually I want to administer the systems centrally from solman.
    I am able to get the ecc dev system in set system monitoring.
    Regards,
    Sudip

    Hi,
    we should create one logical comp for one product systems of Dev,qua,prd ( For ERP dev,qua,prd 1 logical comp, for PI dev,qua,prd 1 logical comp)
    regarding your solution monitoring thing, have you assigned the logical component to your solution?chk the below
    [https://websmp101.sap-ag.de/sapidb/011000358700001873212008E|https://websmp101.sap-ag.de/sapidb/011000358700001873212008E]
    For your auto fill of created by,have you created BP for curresponding users in solman? and define the "Partner Determination Procedure" for the reporter as "User".(remove the old one as 'SAP Service : Determination via IBase/Ind. Object for Ref. Object Set' and set to user)
    Please check and update
    Thanks,
    Jansi

  • Setup Central System Administratin and Setup System Monitoring grayed out

    When trying to setup Central Sytem Administration and System Monitoring via SOLUTION_MANAGER.>Operations Setup->Solution Monitoring->Setup Central System Administration (or Setup System Monitoring).  The link does not work.  However, Setup Earlywatch Alert link works (in Operations Setup->Solution Monitoring->Setup Earlywatch Alert).
    We have just brought SolMan 4.0 up to SolMan 7.0 (applied support packs up to 16).  I am not sure if I am missing a step to activate this functionality; or if perhaps I have an authorization issue.  I have been through the Security Guid for SAP Solution Manager 7.0 as of SP16, and have reviewed note 834534 and been assigned authorizations accordingly....with one exception:  In note 834534, page 4, it states that the configuration user should have SAP_ALL.  However, I am getting push-back from IT Governance and my request for SAP_ALL is being rejected. 
    We have installed software components, in particular ST (Release 400, level 17); ST-SER (700_2008_1, Level 004; and ST-PI (2005_1_700 Level 18); of which I believe ST-SER is key.
    Has anyone encountered this issue?

    Hi,
    Yes, This could be an authorization issue.
    You are able to Setup Early Watch Alert because you may have the role
    SAP_SETUP_DSWP_EWA (full authorization for EarlyWatch Alert setup).
    Assign these roles, you wil be able to setup System Monitoring and Administration.
    1. SAP_SV_SOLUTION_MANAGER (full authorization for all sessions)
    2. SAP_SETUP_DSWP (full authorization for all setup sessions)
    3. SAP_SETUP_DSWP_SM (full authorization for System Monitoring setup)
    4. SAP_SETUP_DSWP_CSA (full authorization for Central System Administration setup)
    5. SAP_SETUP_DSWP_SLR (full authorization for Service Level Report setup)
    Also check these roles:
    SAP_OP_DSWP (full authorization for all Operations sessions)
    SAP_OP_DSWP_EWA (full authorization for EarlyWatch Alert operations)
    SAP_OP_DSWP_SM (full authorization for System Monitoring Operations)
    SAP_OP_DSWP_CSA (full authorization for Central System Administration operations)
    SAP_OP_DSWP_SLR (full authorization for Service Level Report Operations)
    This is the authorization object D_SOL_VIEW  used in these roles.
    Regards,
    Sanjai

  • Setup System Monitoring link disappear in DSWP

    Hi All!
    Could anybody help me?
    I  try to setup System Monitoring. But when I selected System Monitoring tab I saw Setup System Monitoring link disappear.
    Thanks for your advance,
    Alexander Ganiiishev

    Hi,
    Since this involves some screen steps, I highly recommend you to have a look at this blog link
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID0904017550DB01570500522935060780End?blog=/pub/wlg/3544
    Hope this helps.
    Cheers
    SH

  • Solman 7.0 :  setup system monitoring

    hi
    I am taking an error while I want to configure the system monitoring in solman 7.0
    solution monitoring-->sys monitoring  --> setup sys monitoring
    the CCMS Read Destination status is RED.but I have tested  the CCMS Read Dest. by double clicking related section .it is ok.(sm59)so connection is ok .
    have you got any idea   ?
    regards

    hi
    I have checked auth check via sm59 .  it is failed.conn test is ok
    the error is like this : "user or pass is not true"
    what is your suggestions?
    thanks in advance

  • Solman Setup system Monitoring alert threshold value for Filesystem issue

    Hi,
    Our solman system is SAP EHP 1 for SAP Solution Manager 7.0 sp level 0024.
    We have setup the alerts System Monitoring alerts from DSWP in solman system for our target production system .
    But while assigning individual threshold values of filesystem freespace in MB for windows operating system disks C:,D:..all the values are getting changed after saving  to same value.(i.e if I update C:\ disk value and click on save rest of disks are also getting updated to this value).
    The same works fine for filessytems if target system OS is unix.
    I have tried the examples suggested in note:522453 but it nothing changed.Please suggest.

    Hi Sonal
    when you want to save the thresholds for only the one MTE you set
    you need to click on
    EDIT
    -> PROPERTIES
       -> USE FOR INDIVIDUAL MTE
    Kind Regards
    Marius

  • How to transfer information/files

    I just bought a new macbook pro and I'm giving my other one to my son.  what is the easiest way to tranfer files to the new mac?  I tried using an ethernet wire, but it was not successful because the old mac could not find the new mac. 
    Before, we shared the mac and did not set up different accounts.  So when I transfer information, is it easy to select only the files that I want?  Will it also transfer apps and settings?
    Last of all, is there a way to reset my old mac to factory settings?  I think the old one got bogged down - probably because of many unnecessary things on there that filled up my memory (The "other" catagory was large), even though I went thru all of my media and files to get rid of things - the "Other" catagory did not change much.
    Thanks so much!

    I'm guessing that you old MBP came with disks.  If so follow these instructions:
    http://support.apple.com/kb/ht3910
    To transfer data I suggest you consider Target Disk Mode;
    http://support.apple.com/kb/PH10725
    http://support.apple.com/kb/ht1661
    Ciao.

  • How to transfer information

    Just bought the new iPhone 4, how do I transfer all my information & contacts from my old iphone 3?

    http://support.apple.com/kb/HT2109

Maybe you are looking for

  • Creation of multiple nodes in target IDOC as per field from sender file

    Hi SapAll. here i have  got a requirement in an File To Idoc Interface. the requirement is there will be one field under sender  file which will be repeating for multiple records(ItemCount),here pi need to check the value of this field for each recor

  • PDF.OCX or AcroPDF.DLL

    We have a Powerbuilder 9 and 10 application that use to use PDF.OCX, but we can no longer register the file.  We have also read this is no longer supported so we started investigating AcroPDF.DLL.  Problem is no matter what we register, we receiv e a

  • Id from one table showing value from another

    I have an article id (rs_comments.id_com) but I would like it to take this data and collect the value from another table. I have joined the two tables with: SELECT * FROM blg_comment_com INNER JOIN blg_article ON idart_com=id_art WHERE valid_com=1 OR

  • Has anyone solved the Outlook .dll not staying checked for sync?

    I have tried reinstalling everything and updating everything I know to update. When I start outlook 2003 that second .dll still gives me a runtime error. So I have to manually check it every time I want to sync. Thanks for any tips out there.

  • Joint Stereo and dB level

    my .wav custom import settings won't change back to normal stereo, it keeps selecting joint stereo. and, one of my songs imported volume is at +4.3 dB and is distorting, the rest of the songs from the album are fine. I tried re importing it using cd