Setup table in LO
Hi All
Why do we need setup tables in LO? Or What is the purpose of having setup tables in LO extraction?
Regards
Saddy
The purpose of the setup tables is to allow you the capability of loading historical data from R/3 to BW. You can use the setup tables for full loads or for establishing your initialization, but they are used independently of collecting delta data. Thus you can collect historical data for different applications (even different datasources within the same application) without affecting delta's already setup for other datasources.
Hope this helps.
Similar Messages
-
Error while filling setup table
Hello all
I am trying to fill a setup table for 2lis_11_vahdr DS. I deleted setup table firts using LBWG and then proceeded the setup process by using OLI7BW , while i did that i got an error message "Error determing rate:foreign curr.DEM local curr.EUR date 02.01.1997(doc 4969)"
could anyone tell me what this error is referring to ?
thanksHi DK.............
I also think this is a problem of Exchange rate only..............maintain the exchange rate in SPRO >> General Settings >> Enter Exchange Rates.(Tcode : OB08 )
Exchange rate table is TCURR.
Exchange rates are maintained in r/3 and transfer to bw.................rsa1>>source system>>r/3 source system>>right click Transfer...........
Regards,
Debjani........... -
Error while Filling a setup table
Hi,
While i filling a setup table, i got this error message,
"Error determining Rate:foreign curr .local curr
INR date 27.06.2007 (doc.8166) "
any body tell me the meaning of this and how to rectify it.
-Arun.M.DHello Arun
You are getting this error because Currency Exchange Rate is not being loaded to your system for INR. Ask FI team to maintain this.
Reward points if it is helpfull.
Thanks
Tripple k -
Enhancing the standard Data source without deleting setup tables
Hi all,
I am in the the Support Project. My requirement is I want to Enhance u201C2LIS_13_VDITMu201D LO- data source with two fields without disturbing the delta.
Please suggest me how I have to do this.
As Per my Knowledge ,
1. we have to delete setup tables
2. Enhance the data source & re populate the setup tables.
3. Delete the data in the cube & add the two new fields in the cube & repopulate the cube with new Initial .
4. after that delta will be enabled through job control.
But this process is not suitable for our requirement because delta was enabled long back it is going very smooth till date, I donu2019t want to disturb that process.
So please suggest me is there any other procedure to do this.
Thanks,
Kiran ManyamHi,
If historical data (loaded earlier in to BW) are not required for the two enhance field, then it is not required to deleted the setup table and reload them to BI.
In this case simply you can follow the following procedure.
1. Enhance the fields, and update the transfor structure(to unhide these fields). In BI update the required data target with respective IO. and in exit populate the enhance fields. No need to disturb the delta
2. Replicated the DS in BI and do the mappings in tranformation.
Here the existing delta is working, and you will be populating the two fields in the exit only.
Thanks,
Jugal. -
HI,
TO ALL BW GURUS,
I WANT TO KNOW THE ARCHITECTURE OF SETUP TABLES.
WHAT IS THE MAIN DIFF'S BETWEEN NORMAL TABLES AND POOLED AND CLUSTERED TABLES.
2.
WHAT IS PSEUDODELTA.
WHERE IT IS USED AND WHAT IS THE PURPOSE OF THIS DELTA.
THANKS
ANAND.Hi,
check the beow link for table types:
http://help.sap.com/saphelp_47x200/helpdata/en/81/415d363640933fe10000009b38f839/frameset.htm
regards,
raju -
Data not seen in RSA3 after setup table was filled
HI
We have an issue where we do not see data for Sales Orders and Deliveries in RSA3 (and hence is missing in BW).
For sales orders we are missing 6 months' data and for Deliveries we are missing data from june to october 2007.
We checked the sales order and delivery documents in R/3 and they exist for the above date ranges. We deleted and filled up the setup tables. But still don't see the data in RSA3.
There were no extractor changes done.
Any tips?
Thanks
PoojaGo to SE11 and search for setup and look for the specific data source and see the content, if the content is actually zero, then there is nothing in the setup table.
thanks.
Wond -
Can you help with Tcode to fill this SETUP table? not working for me.
Hi,
For the datasource 2LIS_11_VASCL (SD Sales: Schedule Line Item), I need to fill the Setup Tables via OLI*BW
I understand the * to be the application number, which in this case it is 11 but I get a message that OLI11BW does not exist.
1. Can you help me with the tcode to fill the setup table for 2LIS_11_VASCL?
2. Since there are several datasources with the same application number 11, how do I fill only 2LIS_11_VASCL without filling the others:
2LIS_11_VAHDR Sales Document Header Data
2LIS_11_VAITM Sales Document Item Data
2LIS_11_VAKON Sales Document Condition
2LIS_11_VASCL Sales Document Schedule Line
2LIS_11_VASTH Sales Document Header Status
2LIS_11_VASTI Sales Document Item Status
2LIS_11_V_ITM Sales-Shipping Allocation Item Data
2LIS_11_V_SCL Sales-Shipping Allocation Schedule Line
2LIS_11_V_SSL Sales Document Order Delivery
ThanksOk,
I tried that and it basically bring you to OLI7BW as suggested above.
1. At this point, how do you know which of these it is actually filling:
2LIS_11_VAHDR Sales Document Header Data
2LIS_11_VAITM Sales Document Item Data
2LIS_11_VAKON Sales Document Condition
2LIS_11_VASCL Sales Document Schedule Line
2LIS_11_VASTH Sales Document Header Status
2LIS_11_VASTI Sales Document Item Status
2LIS_11_V_ITM Sales-Shipping Allocation Item Data
2LIS_11_V_SCL Sales-Shipping Allocation Schedule Line
2LIS_11_V_SSL Sales Document Order Delivery
2. Also, what does it mean when after running OLI7BW wide, with no restriction on my system, still rsa3 shows no records for 2LIS_11_V_SCL?
Any other way to confirm that there may not be any data in 2LIS_11_V_SCL?
Or any way, to make an entry which reflect in 2LIS_11_V_SCL so that I can verify if OLI7BW actually fills the setup table?
Thanks -
Strange error while filling setup tables for purchasing
hi experts,
while filling setup tables, job is getting cancelled. when I check in sm37 message is
Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings
Job cancelled after system exception ERROR_MESSAGE
It is for only the 8th month of 2009. If I run for other dates it is succesfull.
I am not able to understand what it mean.
Pls guide me how to resolve this.
regards,
rajesh.hi
according to sven check this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?QuickLink=index&overridelayout=true
EUR Conversion to USD
may help you. -
Error while filling the Setup tables
Hi Experts,
I tried to fill the setup tables using the transaction code SBIW. But there I found an error saying that
"Error determining rate: foreign curr. local curr. EUR date 25.07.2007 (doc. 2497)
Message no. M2810".
Please help me in this..
With Regards,
Yokesh Kumar.Hello Yokesh,
Please check whether the Exchange rates that are used in the records are maintained in SPRO.
Thanks
Chandran -
Error while uploading setup table
Hi experts,
while loading the setup table for PO , I am getting the below error.
"No extraction structure active or no BW connected"
what could be the problem and how to rectify this but the stucture is active in LBWE
Thanks in advance
saiHi,
this issue can be resolved in two ways.
1. Check ur RFC connections in both BW system n R/3 System.Goto sm59 in both r/3 n in bw..select the logical system(i.e..ur source system) test the connection...if the connection is ok..then goto RSA5,activate the data source and do the same in LBWE as well..
2. if the connection is not ok..check ur logical sys..in Transaction SALE...there is a possible of changing ur logica ystem too...kindly check it out..
hope this helps..
thanks... -
Filling billing setup table with documents from a given date
Hi
I would like to fill the setup table in R/3 with SD Billing Documents which have been created from 01/05-2007 until now. Is this possible somehow?
(SBIW --> Business Warehouse --> Settings for App Specific Datasources --> Logistics --> Managing Extract Structures --> Initialization --> Filling in the Setup Table --> App. specific setup of statistical data --> Perform Setup - SD Billing Documents)
The only fields I see are:
- Archiving run
- Sales organization
- Company code
- Sales document
Kind regards,
TorbenHi Torben,
I dont think if you dont have option to see the date to select, probably you wont be able to fill your setup table based on date. Otherwise you can pull in the data from R/3 based on this date restriction in your infopackage after filling your setup table without any restriction.
Regards. -
Error while filling setup tables
Hi All,
By mistake my Delta queue for SD Deliveries (2LIS_12_). NOw as a solution we are filling in the setup tables again.
But the request for filling up the tables cancelled giving the error "Document number does not exist".
I donot know, how to solve this? Plz help me ,....Its really really urgent.
Thanx in advance.Hi Preet,
Go through this links:
Re: problem when initializing setup tables for lo update
"No extraction structure active or no BW connected"
LO: No extraction structure active or no BW connected
Thanks,
Ajay -
Error while filling setup tables for 2lis_13_vahdr
Dear friends,
I am getting below Error while filling setup tables for 2lis_13_vahdr.
More faulty documents found than the tolerated 0000000000
Message no. M2222
Can any one guide me how to address this issue.
Thanks and Regards
NithyaHello Nithya,
It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
While executing OLI*BW including a value in the maintain "No. tolerated faulty documents" - 5000 or 10000.
Then execute the program in background.
Once the job is completed check the background job log if any errors.
Thanks
Chandran -
Error while filling setup table for Quality Mangement D/Sources
HI Experts,
Iam trying to fill the QM setup tables.
Steps iam following are
1.T-code OLIQBW
2.Selecting Event QV, QE and gave selection parameters and name for Run.
3. Execute
4.Run Time Error CALL_FUNCTION_PARM_UNKNOWN
Exception CX_SY_DYN_CALL_PARAM_NOT_FOUND
Date and Time 27.08.2009 11:21:01
Function parameter "I_ADDITIONAL_DATA" is unknown.Hi Mansi,
Runtime Errors CALL_FUNCTION_PARM_UNKNOWN
Exceptn CX_SY_DYN_CALL_PARAM_NOT_FOUND
Date and Time 27.08.2009 11:56:20
ShrtText
Function parameter "I_ADDITIONAL_DATA" is unknown.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLQMER" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called
with the parameter "I_ADDITIONAL_DATA".
This parameter is not defined.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class
'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither
caught nor passed along using a RAISING clause, in the procedure
"QMER_EXTRACTION_RD_RESULTS" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The reason for the exception is:
Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called
with the parameter "I_ADDITIONAL_DATA".
This parameter is not defined.
Missing RAISING Clause in Interface
Program SAPLQMER
Include LQMER$01
Row 5
Module type (FUNCTION)
Module Name QMER_EXTRACTION_RD_RESULTS
Trigger Location of Exception
Program SAPLQMER
Include LQMERU01
Row 488
Module type (FUNCTION)
Module Name QMER_EXTRACTION_RD_RESULTS -
Error while filling setup table for Sales
Dear Team,
We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
application component 11
Error determining rate: foreign curr. local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
Message No M2810
application component 13
Billing document 480050000: error determining stats. currency rate (no updating)
More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
If anybody faced this problem kindly reply to this.
Best Regards,
SGHi There,
Might be your using a wrong document number.
I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
If you use vice versa that error will throw.
Regards,
MQ -
Error while filling setup table for 2LIS_03_BF
Hello,
I am getting an error while filling set-up table for 2LIS_03_BF.
Following is the screenshot of the same.
If I check in ST22, I get following,
I could fill the setup table for other datasource 2LIS_03_BX without any problem.
Please suggest.Hi,
Can you try filling the setup table data for that range in background?
Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
But still can't really say what that dump tells from what you attached.
Thanks,
Sathya
Maybe you are looking for
-
plz help me
-
How to change the font in a text field?
I am trying to recreate a file like this: http://www.teacherspayteachers.com/Product/Thank-You-Cards-for-Volunteers-Freebie-Editable Customizable-696763 I originally created the file in Powerpoint, saved as a PDF, brought it into Adobe Pro XI for Mac
-
What monitor should I get for my t500?
I am having problems finding any display port monitors. Am I just missing them, or do I just need to get an adapter and buy a DVI or HDMI monitor? I am thinking a 20-22 inch with WSXGA+ or WUXGA with a price range of $200-$300 Thanks! Thinkpad T500 -
-
Time Machine is brilliant. It's saved me many times. But recently, the backup drive with a year's worth of backups, died. I therefore lost ALL my backups. Not a major problem as I still have my current data and having re-formatted the Time Machine dr
-
Thumbnail creation during Image Upload
In my application, I am able to upload documents to content server using KPRO API's. Image upload works fine and I can display the same file in webdynpro image UI element. Now while uploading the image, i also need to create a thumbnail image and st